@@ -15,10 +15,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
+#include "hardware.h"
#include "mx25.h"
static void __init imx25_dt_init(void)
{
+ mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -16,12 +16,15 @@
#include <asm/mach/time.h>
#include "common.h"
+#include "hardware.h"
#include "mx27.h"
static void __init imx27_dt_init(void)
{
struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+ mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
platform_device_register_full(&devinfo);
@@ -16,10 +16,13 @@
#include <asm/mach/time.h>
#include "common.h"
+#include "hardware.h"
#include "mx31.h"
static void __init imx31_dt_init(void)
{
+ mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -17,12 +17,15 @@
#include <asm/mach/time.h>
#include "common.h"
+#include "hardware.h"
#include "mx51.h"
static void __init imx51_dt_init(void)
{
struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+ mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
platform_device_register_full(&devinfo);
}
@@ -21,6 +21,7 @@
#include <asm/mach/time.h>
#include "common.h"
+#include "hardware.h"
#include "mx53.h"
static void __init imx53_qsb_init(void)
@@ -38,6 +39,8 @@ static void __init imx53_qsb_init(void)
static void __init imx53_dt_init(void)
{
+ mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
+
if (of_machine_is_compatible("fsl,imx53-qsb"))
imx53_qsb_init();
@@ -39,7 +39,6 @@ void __init mx1_map_io(void)
void __init imx1_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX1);
- mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
MX1_NUM_GPIO_PORT);
}
@@ -51,6 +50,7 @@ void __init mx1_init_irq(void)
void __init imx1_soc_init(void)
{
+ mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
mxc_device_init();
mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
@@ -66,7 +66,6 @@ void __init mx21_map_io(void)
void __init imx21_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX21);
- mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR),
MX21_NUM_GPIO_PORT);
}
@@ -82,6 +81,7 @@ static const struct resource imx21_audmux_res[] __initconst = {
void __init imx21_soc_init(void)
{
+ mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
mxc_device_init();
mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
@@ -54,7 +54,6 @@ void __init imx25_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX25);
mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
}
void __init mx25_init_irq(void)
@@ -89,6 +88,7 @@ static const struct resource imx25_audmux_res[] __initconst = {
void __init imx25_soc_init(void)
{
+ mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
mxc_device_init();
/* i.mx25 has the i.mx35 type gpio */
@@ -66,7 +66,6 @@ void __init mx27_map_io(void)
void __init imx27_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX27);
- mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR),
MX27_NUM_GPIO_PORT);
}
@@ -82,6 +81,7 @@ static const struct resource imx27_audmux_res[] __initconst = {
void __init imx27_soc_init(void)
{
+ mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
mxc_device_init();
/* i.mx27 has the i.mx21 type gpio */
@@ -138,7 +138,6 @@ void __init mx31_map_io(void)
void __init imx31_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
- mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
arch_ioremap_caller = imx3_ioremap_caller;
arm_pm_idle = imx3_idle;
mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
@@ -174,6 +173,7 @@ void __init imx31_soc_init(void)
imx3_init_l2x0();
+ mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
mxc_device_init();
mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
@@ -216,7 +216,6 @@ void __init imx35_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
arm_pm_idle = imx3_idle;
arch_ioremap_caller = imx3_ioremap_caller;
mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
@@ -272,6 +271,7 @@ void __init imx35_soc_init(void)
imx3_init_l2x0();
+ mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
mxc_device_init();
mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
@@ -83,7 +83,6 @@ void __init imx51_init_early(void)
imx51_ipu_mipi_setup();
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
imx_src_init();
}
@@ -91,7 +90,6 @@ void __init imx53_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX53);
mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
imx_src_init();
}
@@ -129,6 +127,7 @@ static const struct resource imx51_audmux_res[] __initconst = {
void __init imx51_soc_init(void)
{
+ mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
mxc_device_init();
/* i.mx51 has the i.mx35 type gpio */
@@ -30,6 +30,7 @@
#include "hardware.h"
static void __iomem *wdog_base;
+static struct clk *wdog_clk;
/*
* Reset the system. It is called by machine_restart().
@@ -38,16 +39,13 @@ void mxc_restart(char mode, const char *cmd)
{
unsigned int wcr_enable;
- if (cpu_is_mx1()) {
- wcr_enable = (1 << 0);
- } else {
- struct clk *clk;
+ if (wdog_clk)
+ clk_enable(wdog_clk);
- clk = clk_get_sys("imx2-wdt.0", NULL);
- if (!IS_ERR(clk))
- clk_prepare_enable(clk);
+ if (cpu_is_mx1())
+ wcr_enable = (1 << 0);
+ else
wcr_enable = (1 << 2);
- }
/* Assert SRS signal */
__raw_writew(wcr_enable, wdog_base);
@@ -55,7 +53,7 @@ void mxc_restart(char mode, const char *cmd)
/* wait for reset to assert... */
mdelay(500);
- printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+ pr_err("%s: Watchdog reset failed to assert reset\n", __func__);
/* delay to allow the serial port to show the message */
mdelay(50);
@@ -64,7 +62,16 @@ void mxc_restart(char mode, const char *cmd)
soft_restart(0);
}
-void mxc_arch_reset_init(void __iomem *base)
+void __init mxc_arch_reset_init(void __iomem *base)
{
wdog_base = base;
+
+ wdog_clk = clk_get_sys("imx2-wdt.0", NULL);
+ if (IS_ERR(wdog_clk)) {
+ pr_warn("%s: failed to get wdog clock\n", __func__);
+ wdog_clk = NULL;
+ return;
+ }
+
+ clk_prepare(wdog_clk);
}
It's inappropriate to call clk_prepare() in mxs_restart(), because the restart routine could be called in atomic context. Move clk_get() and clk_prepare() into mxc_arch_reset_init() and only have the atomic part clk_enable() be called in mxs_restart(). As a result, mxc_arch_reset_init() needs to be called after clk gets initialized. While there, it also changes printk(KERN_ERR ...) to pr_err() and adds __init annotation for mxc_arch_reset_init(). Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- arch/arm/mach-imx/imx25-dt.c | 3 +++ arch/arm/mach-imx/imx27-dt.c | 3 +++ arch/arm/mach-imx/imx31-dt.c | 3 +++ arch/arm/mach-imx/imx51-dt.c | 3 +++ arch/arm/mach-imx/mach-imx53.c | 3 +++ arch/arm/mach-imx/mm-imx1.c | 2 +- arch/arm/mach-imx/mm-imx21.c | 2 +- arch/arm/mach-imx/mm-imx25.c | 2 +- arch/arm/mach-imx/mm-imx27.c | 2 +- arch/arm/mach-imx/mm-imx3.c | 4 ++-- arch/arm/mach-imx/mm-imx5.c | 3 +-- arch/arm/mach-imx/system.c | 27 +++++++++++++++++---------- 12 files changed, 39 insertions(+), 18 deletions(-)