diff mbox

[U-Boot] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT

Message ID 1368182421-859-1-git-send-email-ying.zhang@freescale.com
State Changes Requested
Delegated to: Wolfgang Denk
Headers show

Commit Message

ying.zhang@freescale.com May 10, 2013, 10:40 a.m. UTC
From: Ying Zhang <b40530@freescale.com>

Add a new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT.

In common/Makefile, the environment-related files in SPL is difined by
CONFIG_SPL_NET_SUPPORT, it is wrong.

Signed-off-by: Ying Zhang <b40530@freescale.com>
---
 common/Makefile              |   12 +++++-------
 include/configs/am335x_evm.h |    1 +
 include/configs/pcm051.h     |    1 +
 3 files changed, 7 insertions(+), 7 deletions(-)

Comments

Wolfgang Denk May 11, 2013, 12:03 a.m. UTC | #1
Dear ying.zhang@freescale.com,

In message <1368182421-859-1-git-send-email-ying.zhang@freescale.com> you wrote:
> From: Ying Zhang <b40530@freescale.com>
> 
> Add a new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT.

Any CONFIG_* stuff must be documented in the README.  Please add this
documentation.

> In common/Makefile, the environment-related files in SPL is difined by
> CONFIG_SPL_NET_SUPPORT, it is wrong.

s/difined/defined/

Could you please also explain, what exactly is wrong, and how your new
code fixes this?

> --- a/include/configs/am335x_evm.h
> +++ b/include/configs/am335x_evm.h
> @@ -325,6 +325,7 @@
>  #define CONFIG_SPL_GPIO_SUPPORT
>  #define CONFIG_SPL_YMODEM_SUPPORT
>  #define CONFIG_SPL_NET_SUPPORT
> +#define CONFIG_SPL_ENV_SUPPORT
>  #define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
>  #define CONFIG_SPL_ETH_SUPPORT
>  #define CONFIG_SPL_SPI_SUPPORT
> diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
> index d0ea74e..926842f 100644
> --- a/include/configs/pcm051.h
> +++ b/include/configs/pcm051.h
> @@ -224,6 +224,7 @@
>  #define CONFIG_SPL_GPIO_SUPPORT
>  #define CONFIG_SPL_YMODEM_SUPPORT
>  #define CONFIG_SPL_NET_SUPPORT
> +#define CONFIG_SPL_ENV_SUPPORT
>  #define CONFIG_SPL_NET_VCI_STRING	"pcm051 U-Boot SPL"
>  #define CONFIG_SPL_ETH_SUPPORT
>  #define CONFIG_SPL_SPI_SUPPORT

Are you sure these are the only locations that need this?

Best regards,

Wolfgang Denk
Scott Wood May 11, 2013, 12:28 a.m. UTC | #2
On 05/10/2013 07:03:07 PM, Wolfgang Denk wrote:
> Dear ying.zhang@freescale.com,
> 
> In message <1368182421-859-1-git-send-email-ying.zhang@freescale.com>  
> you wrote:
> > From: Ying Zhang <b40530@freescale.com>
> >
> > Add a new symbol CONFIG_SPL_ENV_SUPPORT to replace  
> CONFIG_SPL_NET_SUPPORT.
> 
> Any CONFIG_* stuff must be documented in the README.  Please add this
> documentation.
> 
> > In common/Makefile, the environment-related files in SPL is difined  
> by
> > CONFIG_SPL_NET_SUPPORT, it is wrong.
> 
> s/difined/defined/
> 
> Could you please also explain, what exactly is wrong, and how your new
> code fixes this?

We will need the environment in SPL for reasons other than network  
support (in particular, hwconfig contains info for how to set up DDR).   
Yes, this information should go in the changelog.

-Scott
Zhang Ying-B40530 May 13, 2013, 7:19 a.m. UTC | #3
-----Original Message-----
From: Wood Scott-B07421 
Sent: Saturday, May 11, 2013 8:29 AM
To: Wolfgang Denk
Cc: Zhang Ying-B40530; u-boot@lists.denx.de; Xie Xiaobo-R63061; Zhang Ying-B40530
Subject: Re: [U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT to replace CONFIG_SPL_NET_SUPPORT

On 05/10/2013 07:03:07 PM, Wolfgang Denk wrote:
> Dear ying.zhang@freescale.com,
> 
> In message <1368182421-859-1-git-send-email-ying.zhang@freescale.com>
> you wrote:
> > From: Ying Zhang <b40530@freescale.com>
> >
> > Add a new symbol CONFIG_SPL_ENV_SUPPORT to replace
> CONFIG_SPL_NET_SUPPORT.
> 
> Any CONFIG_* stuff must be documented in the README.  Please add this 
> documentation.
> 
> > In common/Makefile, the environment-related files in SPL is difined
> by
> > CONFIG_SPL_NET_SUPPORT, it is wrong.
> 
> s/difined/defined/
> 
> Could you please also explain, what exactly is wrong, and how your new 
> code fixes this?

We will need the environment in SPL for reasons other than network  
support (in particular, hwconfig contains info for how to set up DDR).   
Yes, this information should go in the changelog.
[Zhang Ying]
OK, I will update this patch and CONFIG_SPL_ENV_SUPPORT will be added in README.

> --- a/include/configs/am335x_evm.h
> +++ b/include/configs/am335x_evm.h
> @@ -325,6 +325,7 @@
>  #define CONFIG_SPL_GPIO_SUPPORT
>  #define CONFIG_SPL_YMODEM_SUPPORT
>  #define CONFIG_SPL_NET_SUPPORT
> +#define CONFIG_SPL_ENV_SUPPORT
>  #define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
>  #define CONFIG_SPL_ETH_SUPPORT
>  #define CONFIG_SPL_SPI_SUPPORT
> diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 
> d0ea74e..926842f 100644
> --- a/include/configs/pcm051.h
> +++ b/include/configs/pcm051.h
> @@ -224,6 +224,7 @@
>  #define CONFIG_SPL_GPIO_SUPPORT
>  #define CONFIG_SPL_YMODEM_SUPPORT
>  #define CONFIG_SPL_NET_SUPPORT
> +#define CONFIG_SPL_ENV_SUPPORT
>  #define CONFIG_SPL_NET_VCI_STRING	"pcm051 U-Boot SPL"
>  #define CONFIG_SPL_ETH_SUPPORT
>  #define CONFIG_SPL_SPI_SUPPORT

Are you sure these are the only locations that need this?
[Zhang Ying]
I've searched for the symbol "CONFIG_SPL_NET_SUPPORT" all of the code, there is only the two files to define.
Tom Rini May 13, 2013, 7:07 p.m. UTC | #4
On Fri, May 10, 2013 at 07:28:46PM -0500, Scott Wood wrote:
> On 05/10/2013 07:03:07 PM, Wolfgang Denk wrote:
> >Dear ying.zhang@freescale.com,
> >
> >In message
> ><1368182421-859-1-git-send-email-ying.zhang@freescale.com> you
> >wrote:
> >> From: Ying Zhang <b40530@freescale.com>
> >>
> >> Add a new symbol CONFIG_SPL_ENV_SUPPORT to replace
> >CONFIG_SPL_NET_SUPPORT.
> >
> >Any CONFIG_* stuff must be documented in the README.  Please add this
> >documentation.
> >
> >> In common/Makefile, the environment-related files in SPL is
> >difined by
> >> CONFIG_SPL_NET_SUPPORT, it is wrong.
> >
> >s/difined/defined/
> >
> >Could you please also explain, what exactly is wrong, and how your new
> >code fixes this?
> 
> We will need the environment in SPL for reasons other than network
> support (in particular, hwconfig contains info for how to set up
> DDR).  Yes, this information should go in the changelog.

Note that a3m071 already does SPL + Environment and should be updated,
CONFIG-symbol wise here.  It currently gets away with
env_common/cmd_nvedit being pulled in always on LIBCOMMON and then
discarded when not needed.
diff mbox

Patch

diff --git a/common/Makefile b/common/Makefile
index 0e0fff1..1bd742a 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -215,15 +215,13 @@  endif
 
 ifdef CONFIG_SPL_BUILD
 COBJS-y += cmd_nvedit.o
-COBJS-y += env_common.o
 COBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
 COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += cmd_nvedit.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_attr.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_callback.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_common.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_flags.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_nowhere.o
+COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_common.o
+COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o
+COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o
+COBJS-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o
+COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
 COBJS-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
 endif
 COBJS-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index ef00306..f47d3d1 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -325,6 +325,7 @@ 
 #define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_YMODEM_SUPPORT
 #define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
 #define CONFIG_SPL_ETH_SUPPORT
 #define CONFIG_SPL_SPI_SUPPORT
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index d0ea74e..926842f 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -224,6 +224,7 @@ 
 #define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_YMODEM_SUPPORT
 #define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_NET_VCI_STRING	"pcm051 U-Boot SPL"
 #define CONFIG_SPL_ETH_SUPPORT
 #define CONFIG_SPL_SPI_SUPPORT