Message ID | 201305060311.44958.marex@denx.de |
---|---|
State | Accepted |
Delegated to: | Albert ARIBAUD |
Headers | show |
On Mon, May 06, 2013 at 03:11:44AM +0200, Marek Vasut wrote: > The following changes since commit 5ed6f447af60aabd2669d913f673793c1ce48f47: > > P1022DS: Set CONFIG_SPL_MAX_SIZE directly (2013-05-03 09:19:43 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-pxa.git master > > for you to fetch changes up to 66a62ce0dc48d2319938c72f34a562f519c5d5c2: > > h2200: Add board reset support (2013-05-05 23:47:05 +0200) > > ---------------------------------------------------------------- > Mike Dunn (5): > lib: import bitrev library from the linux kernel > pxa_lcd: add the ACX544AKN lcd device > pxa_lcd: make lcd_enable() a weak pointer > pxa27x_udc: remove call to unimplemented set_GPIO_mode() > mtd: nand: add driver for diskonchip g4 nand flash > > ??ukasz Da??ek (2): > pxa: Add weak attribute to reset_cpu() function > h2200: Add board reset support > > arch/arm/cpu/pxa/pxa2xx.c | 2 +- > arch/arm/include/asm/arch-pxa/hardware.h | 11 -- > board/h2200/h2200.c | 9 ++ > drivers/mtd/nand/Makefile | 2 + > drivers/mtd/nand/docg4.c | 1028 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > drivers/mtd/nand/docg4_spl.c | 222 ++++++++++++++++++++++++++++ > drivers/usb/gadget/pxa27x_udc.c | 4 +- > drivers/video/pxa_lcd.c | 34 ++++- > include/linux/bitrev.h | 23 +++ > include/linux/mtd/docg4.h | 134 +++++++++++++++++ > lib/Makefile | 1 + > lib/bitrev.c | 59 ++++++++ > 12 files changed, 1515 insertions(+), 14 deletions(-) > create mode 100644 drivers/mtd/nand/docg4.c > create mode 100644 drivers/mtd/nand/docg4_spl.c > create mode 100644 include/linux/bitrev.h > create mode 100644 include/linux/mtd/docg4.h > create mode 100644 lib/bitrev.c Ahem, this is for Albert :)
Dear Tom Rini, > On Mon, May 06, 2013 at 03:11:44AM +0200, Marek Vasut wrote: > > The following changes since commit 5ed6f447af60aabd2669d913f673793c1ce48f47: > > P1022DS: Set CONFIG_SPL_MAX_SIZE directly (2013-05-03 09:19:43 -0400) > > > > are available in the git repository at: > > git://git.denx.de/u-boot-pxa.git master > > > > for you to fetch changes up to 66a62ce0dc48d2319938c72f34a562f519c5d5c2: > > h2200: Add board reset support (2013-05-05 23:47:05 +0200) > > > > ---------------------------------------------------------------- > > > > Mike Dunn (5): > > lib: import bitrev library from the linux kernel > > pxa_lcd: add the ACX544AKN lcd device > > pxa_lcd: make lcd_enable() a weak pointer > > pxa27x_udc: remove call to unimplemented set_GPIO_mode() > > mtd: nand: add driver for diskonchip g4 nand flash > > > > ??ukasz Da??ek (2): > > pxa: Add weak attribute to reset_cpu() function > > h2200: Add board reset support > > > > arch/arm/cpu/pxa/pxa2xx.c | 2 +- > > arch/arm/include/asm/arch-pxa/hardware.h | 11 -- > > board/h2200/h2200.c | 9 ++ > > drivers/mtd/nand/Makefile | 2 + > > drivers/mtd/nand/docg4.c | 1028 > > > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > > drivers/mtd/nand/docg4_spl.c | 222 > > ++++++++++++++++++++++++++++ drivers/usb/gadget/pxa27x_udc.c | > > 4 +- > > drivers/video/pxa_lcd.c | 34 ++++- > > include/linux/bitrev.h | 23 +++ > > include/linux/mtd/docg4.h | 134 +++++++++++++++++ > > lib/Makefile | 1 + > > lib/bitrev.c | 59 ++++++++ > > 12 files changed, 1515 insertions(+), 14 deletions(-) > > create mode 100644 drivers/mtd/nand/docg4.c > > create mode 100644 drivers/mtd/nand/docg4_spl.c > > create mode 100644 include/linux/bitrev.h > > create mode 100644 include/linux/mtd/docg4.h > > create mode 100644 lib/bitrev.c > > Ahem, this is for Albert :) Yes it is, my bad. Best regards, Marek Vasut
Hi Marek, On Mon, 6 May 2013 03:11:44 +0200, Marek Vasut <marex@denx.de> wrote: > The following changes since commit 5ed6f447af60aabd2669d913f673793c1ce48f47: > > P1022DS: Set CONFIG_SPL_MAX_SIZE directly (2013-05-03 09:19:43 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-pxa.git master > > for you to fetch changes up to 66a62ce0dc48d2319938c72f34a562f519c5d5c2: > > h2200: Add board reset support (2013-05-05 23:47:05 +0200) > > ---------------------------------------------------------------- > Mike Dunn (5): > lib: import bitrev library from the linux kernel > pxa_lcd: add the ACX544AKN lcd device > pxa_lcd: make lcd_enable() a weak pointer > pxa27x_udc: remove call to unimplemented set_GPIO_mode() > mtd: nand: add driver for diskonchip g4 nand flash > > Łukasz Dałek (2): > pxa: Add weak attribute to reset_cpu() function > h2200: Add board reset support > > arch/arm/cpu/pxa/pxa2xx.c | 2 +- > arch/arm/include/asm/arch-pxa/hardware.h | 11 -- > board/h2200/h2200.c | 9 ++ > drivers/mtd/nand/Makefile | 2 + > drivers/mtd/nand/docg4.c | 1028 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > drivers/mtd/nand/docg4_spl.c | 222 ++++++++++++++++++++++++++++ > drivers/usb/gadget/pxa27x_udc.c | 4 +- > drivers/video/pxa_lcd.c | 34 ++++- > include/linux/bitrev.h | 23 +++ > include/linux/mtd/docg4.h | 134 +++++++++++++++++ > lib/Makefile | 1 + > lib/bitrev.c | 59 ++++++++ > 12 files changed, 1515 insertions(+), 14 deletions(-) > create mode 100644 drivers/mtd/nand/docg4.c > create mode 100644 drivers/mtd/nand/docg4_spl.c > create mode 100644 include/linux/bitrev.h > create mode 100644 include/linux/mtd/docg4.h > create mode 100644 lib/bitrev.c > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot Applied to u-boot-arm/master, thanks! Amicalement,