| Message ID | 1367851681-12228-1-git-send-email-gustavo@zacarias.com.ar |
|---|---|
| State | Accepted |
| Commit | 9e5a5451c7785214568f35e679be0a43ec48f4df |
| Headers | show |
>>>>> "Gustavo" == Gustavo Zacarias <gustavo@zacarias.com.ar> writes:
Gustavo> Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Committed, thanks.
Gustavo> @@ -29,4 +29,4 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
Gustavo> # Bootloader
Gustavo> BR2_TARGET_UBOOT=y
Gustavo> BR2_TARGET_UBOOT_BOARDNAME="P1010RDB_NOR"
Gustavo> -BR2_TARGET_UBOOT_2012_10=y
Gustavo> +BR2_TARGET_UBOOT_2013_04=y
This will have to change to UBOOT_CUSTOM_VERSION once that lands.
On 05/06/2013 11:55 AM, Peter Korsgaard wrote:
> This will have to change to UBOOT_CUSTOM_VERSION once that lands.
Yes, it would probably be a good policy to do it for all the board
configurations.
Regards.
diff --git a/board/freescale/mpc8315erdb/readme.txt b/board/freescale/mpc8315erdb/readme.txt index 91e58e4..f7f9c94 100644 --- a/board/freescale/mpc8315erdb/readme.txt +++ b/board/freescale/mpc8315erdb/readme.txt @@ -6,7 +6,7 @@ It won't work for NOR and will brick that bootloader! Also don't go playing around with different U-boot versions or flash targets unless you've got the necessary hardware and/or know-how to unbrick your kit. -2012.10 is known good for NAND. +2013.04 is known good for NAND. ******************** WARNING ******************** You'll need to program the files created by buildroot into the flash. diff --git a/board/freescale/p1010rdb/readme.txt b/board/freescale/p1010rdb/readme.txt index 96293b7..5b56873 100644 --- a/board/freescale/p1010rdb/readme.txt +++ b/board/freescale/p1010rdb/readme.txt @@ -6,7 +6,7 @@ It won't work for NAND or SPI and will brick those bootloaders! Also don't go playing around with different U-boot versions or flash targets unless you've got the necessary hardware and/or know-how to unbrick your kit. -2012.10 is known good for NOR, but BAD for NAND and SPI. +2013.04 is known good for NOR. ******************** WARNING ******************** You'll need to program the files created by buildroot into the flash. diff --git a/configs/freescale_mpc8315erdb_defconfig b/configs/freescale_mpc8315erdb_defconfig index 9f733fa..88e0d8a 100644 --- a/configs/freescale_mpc8315erdb_defconfig +++ b/configs/freescale_mpc8315erdb_defconfig @@ -30,4 +30,4 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" # Bootloader BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="MPC8315ERDB_NAND" -BR2_TARGET_UBOOT_2012_10=y +BR2_TARGET_UBOOT_2013_04=y diff --git a/configs/freescale_p1010rdb_defconfig b/configs/freescale_p1010rdb_defconfig index a36f07c..8887636 100644 --- a/configs/freescale_p1010rdb_defconfig +++ b/configs/freescale_p1010rdb_defconfig @@ -29,4 +29,4 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" # Bootloader BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="P1010RDB_NOR" -BR2_TARGET_UBOOT_2012_10=y +BR2_TARGET_UBOOT_2013_04=y
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> --- board/freescale/mpc8315erdb/readme.txt | 2 +- board/freescale/p1010rdb/readme.txt | 2 +- configs/freescale_mpc8315erdb_defconfig | 2 +- configs/freescale_p1010rdb_defconfig | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)