diff mbox

[1/4,v2] powerpc/fsl-booke: Add initial silicon device tree files for B4860 and B4420

Message ID 1365143632-19362-1-git-send-email-shaveta@freescale.com (mailing list archive)
State Accepted, archived
Delegated to: Kumar Gala
Headers show

Commit Message

Shaveta Leekha April 5, 2013, 6:33 a.m. UTC
B4860 and B4420 are similar that share some commonalities

* common features have been added in b4si-pre.dtsi and b4si-post.dtsi
* differences are added in respective silicon files of B4860 and B4420

There are several things missing from the device trees of B4860 and B4420:

* DPAA related nodes (Qman, Bman, Fman, Rman)
* DSP related nodes/information
* serdes, sfp(security fuse processor), thermal,
  gpio, maple, cpri, quad timers nodes

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Vakul Garg <vakul@freescale.com>
---
v2: 
    - incorporated review comments on commits message
    - change unit address of cpu nodes to match the reg property

 arch/powerpc/boot/dts/fsl/b4420si-post.dtsi |   94 ++++++++++
 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi  |   49 +++++
 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi |  138 ++++++++++++++
 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi  |   59 ++++++
 arch/powerpc/boot/dts/fsl/b4si-post.dtsi    |  262 +++++++++++++++++++++++++++
 arch/powerpc/boot/dts/fsl/b4si-pre.dtsi     |   65 +++++++
 6 files changed, 667 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/b4si-post.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/b4si-pre.dtsi

Comments

Kumar Gala April 5, 2013, 2:22 p.m. UTC | #1
On Apr 5, 2013, at 1:33 AM, Shaveta Leekha wrote:

> B4860 and B4420 are similar that share some commonalities
> 
> * common features have been added in b4si-pre.dtsi and b4si-post.dtsi
> * differences are added in respective silicon files of B4860 and B4420
> 
> There are several things missing from the device trees of B4860 and B4420:
> 
> * DPAA related nodes (Qman, Bman, Fman, Rman)
> * DSP related nodes/information
> * serdes, sfp(security fuse processor), thermal,
> gpio, maple, cpri, quad timers nodes
> 
> Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> Signed-off-by: Andy Fleming <afleming@freescale.com>
> Signed-off-by: Vakul Garg <vakul@freescale.com>
> ---
> v2: 
>  - incorporated review comments on commits message
>  - change unit address of cpu nodes to match the reg property
> 
> arch/powerpc/boot/dts/fsl/b4420si-post.dtsi |   94 ++++++++++
> arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi  |   49 +++++
> arch/powerpc/boot/dts/fsl/b4860si-post.dtsi |  138 ++++++++++++++
> arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi  |   59 ++++++
> arch/powerpc/boot/dts/fsl/b4si-post.dtsi    |  262 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/b4si-pre.dtsi     |   65 +++++++
> 6 files changed, 667 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4si-pre.dtsi

Is there a reason you didn't get rid of b4si-pre.dtsi and just merge it into b4860si-pre.dtsi & b4420-pre.dtsi?

- k
Leekha Shaveta-B20052 April 5, 2013, 3:43 p.m. UTC | #2
-----Original Message-----
From: Kumar Gala [mailto:galak@kernel.crashing.org] 
Sent: Friday, April 05, 2013 7:53 PM
To: Leekha Shaveta-B20052
Cc: linuxppc-dev@lists.ozlabs.org list
Subject: Re: [PATCH 1/4][v2] powerpc/fsl-booke: Add initial silicon device tree files for B4860 and B4420


On Apr 5, 2013, at 1:33 AM, Shaveta Leekha wrote:

> B4860 and B4420 are similar that share some commonalities
> 
> * common features have been added in b4si-pre.dtsi and b4si-post.dtsi
> * differences are added in respective silicon files of B4860 and B4420
> 
> There are several things missing from the device trees of B4860 and B4420:
> 
> * DPAA related nodes (Qman, Bman, Fman, Rman)
> * DSP related nodes/information
> * serdes, sfp(security fuse processor), thermal, gpio, maple, cpri, 
> quad timers nodes
> 
> Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> Signed-off-by: Andy Fleming <afleming@freescale.com>
> Signed-off-by: Vakul Garg <vakul@freescale.com>
> ---
> v2: 
>  - incorporated review comments on commits message
>  - change unit address of cpu nodes to match the reg property
> 
> arch/powerpc/boot/dts/fsl/b4420si-post.dtsi |   94 ++++++++++
> arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi  |   49 +++++
> arch/powerpc/boot/dts/fsl/b4860si-post.dtsi |  138 ++++++++++++++
> arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi  |   59 ++++++
> arch/powerpc/boot/dts/fsl/b4si-post.dtsi    |  262 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/b4si-pre.dtsi     |   65 +++++++
> 6 files changed, 667 insertions(+), 0 deletions(-) create mode 100644 
> arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4si-pre.dtsi

Is there a reason you didn't get rid of b4si-pre.dtsi and just merge it into b4860si-pre.dtsi & b4420-pre.dtsi?
[SL] No particular reason. I have just tried to re-factored these files as you have suggested. Hence managed the commonalities in B4 files and differences in B4860's and B4420's respective files to reduce duplicity.

Regards,
Shaveta 

- k
Leekha Shaveta-B20052 April 8, 2013, 4:48 a.m. UTC | #3
-----Original Message-----
From: Leekha Shaveta-B20052 
Sent: Friday, April 05, 2013 9:13 PM
To: 'Kumar Gala'
Cc: linuxppc-dev@lists.ozlabs.org list
Subject: RE: [PATCH 1/4][v2] powerpc/fsl-booke: Add initial silicon device tree files for B4860 and B4420



-----Original Message-----
From: Kumar Gala [mailto:galak@kernel.crashing.org] 
Sent: Friday, April 05, 2013 7:53 PM
To: Leekha Shaveta-B20052
Cc: linuxppc-dev@lists.ozlabs.org list
Subject: Re: [PATCH 1/4][v2] powerpc/fsl-booke: Add initial silicon device tree files for B4860 and B4420


On Apr 5, 2013, at 1:33 AM, Shaveta Leekha wrote:

> B4860 and B4420 are similar that share some commonalities
> 
> * common features have been added in b4si-pre.dtsi and b4si-post.dtsi
> * differences are added in respective silicon files of B4860 and B4420
> 
> There are several things missing from the device trees of B4860 and B4420:
> 
> * DPAA related nodes (Qman, Bman, Fman, Rman)
> * DSP related nodes/information
> * serdes, sfp(security fuse processor), thermal, gpio, maple, cpri, 
> quad timers nodes
> 
> Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> Signed-off-by: Andy Fleming <afleming@freescale.com>
> Signed-off-by: Vakul Garg <vakul@freescale.com>
> ---
> v2: 
>  - incorporated review comments on commits message
>  - change unit address of cpu nodes to match the reg property
> 
> arch/powerpc/boot/dts/fsl/b4420si-post.dtsi |   94 ++++++++++
> arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi  |   49 +++++
> arch/powerpc/boot/dts/fsl/b4860si-post.dtsi |  138 ++++++++++++++
> arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi  |   59 ++++++
> arch/powerpc/boot/dts/fsl/b4si-post.dtsi    |  262 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/b4si-pre.dtsi     |   65 +++++++
> 6 files changed, 667 insertions(+), 0 deletions(-) create mode 100644 
> arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4si-pre.dtsi

Is there a reason you didn't get rid of b4si-pre.dtsi and just merge it into b4860si-pre.dtsi & b4420-pre.dtsi?
[SL] No particular reason. I have just tried to re-factored these files as you have suggested. Hence managed the commonalities in B4 files and differences in B4860's and B4420's respective files to reduce duplicity.

Regards,
Shaveta 

[SL] Kumar, please suggest. 

Regards,
Shaveta
Aggrwal Poonam-B10812 April 9, 2013, 5:42 a.m. UTC | #4
> -----Original Message-----
> From: Linuxppc-dev [mailto:linuxppc-dev-
> bounces+poonam.aggrwal=freescale.com@lists.ozlabs.org] On Behalf Of
> Leekha Shaveta-B20052
> Sent: Monday, April 08, 2013 10:18 AM
> To: Kumar Gala
> Cc: linuxppc-dev@lists.ozlabs.org list
> Subject: RE: [PATCH 1/4][v2] powerpc/fsl-booke: Add initial silicon
> device tree files for B4860 and B4420
> 
> 
> 
> -----Original Message-----
> From: Leekha Shaveta-B20052
> Sent: Friday, April 05, 2013 9:13 PM
> To: 'Kumar Gala'
> Cc: linuxppc-dev@lists.ozlabs.org list
> Subject: RE: [PATCH 1/4][v2] powerpc/fsl-booke: Add initial silicon
> device tree files for B4860 and B4420
> 
> 
> 
> -----Original Message-----
> From: Kumar Gala [mailto:galak@kernel.crashing.org]
> Sent: Friday, April 05, 2013 7:53 PM
> To: Leekha Shaveta-B20052
> Cc: linuxppc-dev@lists.ozlabs.org list
> Subject: Re: [PATCH 1/4][v2] powerpc/fsl-booke: Add initial silicon
> device tree files for B4860 and B4420
> 
> 
> On Apr 5, 2013, at 1:33 AM, Shaveta Leekha wrote:
> 
> > B4860 and B4420 are similar that share some commonalities
> >
> > * common features have been added in b4si-pre.dtsi and b4si-post.dtsi
> > * differences are added in respective silicon files of B4860 and B4420
> >
> > There are several things missing from the device trees of B4860 and
> B4420:
> >
> > * DPAA related nodes (Qman, Bman, Fman, Rman)
> > * DSP related nodes/information
> > * serdes, sfp(security fuse processor), thermal, gpio, maple, cpri,
> > quad timers nodes
> >
> > Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
> > Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> > Signed-off-by: Li Yang <leoli@freescale.com>
> > Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
> > Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
> > Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
> > Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
> > Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> > Signed-off-by: Andy Fleming <afleming@freescale.com>
> > Signed-off-by: Vakul Garg <vakul@freescale.com>
> > ---
> > v2:
> >  - incorporated review comments on commits message
> >  - change unit address of cpu nodes to match the reg property
> >
> > arch/powerpc/boot/dts/fsl/b4420si-post.dtsi |   94 ++++++++++
> > arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi  |   49 +++++
> > arch/powerpc/boot/dts/fsl/b4860si-post.dtsi |  138 ++++++++++++++
> > arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi  |   59 ++++++
> > arch/powerpc/boot/dts/fsl/b4si-post.dtsi    |  262
> +++++++++++++++++++++++++++
> > arch/powerpc/boot/dts/fsl/b4si-pre.dtsi     |   65 +++++++
> > 6 files changed, 667 insertions(+), 0 deletions(-) create mode 100644
> > arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
> > create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
> > create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
> > create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
> > create mode 100644 arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> > create mode 100644 arch/powerpc/boot/dts/fsl/b4si-pre.dtsi
> 
> Is there a reason you didn't get rid of b4si-pre.dtsi and just merge it
> into b4860si-pre.dtsi & b4420-pre.dtsi?
> [SL] No particular reason. I have just tried to re-factored these files
> as you have suggested. Hence managed the commonalities in B4 files and
> differences in B4860's and B4420's respective files to reduce duplicity.
> 
> Regards,
> Shaveta
> 
> [SL] Kumar, please suggest.

Please suggest , if this re-factoring for pre-si dtsi should not be required.
This was done to keep things uniform.

Accordingly we will send a re-spin if required.

Regards
Poonam
> 
> Regards,
> Shaveta
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
Kumar Gala April 10, 2013, 3:17 p.m. UTC | #5
On Apr 5, 2013, at 1:33 AM, Shaveta Leekha wrote:

> B4860 and B4420 are similar that share some commonalities
> 
> * common features have been added in b4si-pre.dtsi and b4si-post.dtsi
> * differences are added in respective silicon files of B4860 and B4420
> 
> There are several things missing from the device trees of B4860 and B4420:
> 
> * DPAA related nodes (Qman, Bman, Fman, Rman)
> * DSP related nodes/information
> * serdes, sfp(security fuse processor), thermal,
>  gpio, maple, cpri, quad timers nodes
> 
> Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> Signed-off-by: Andy Fleming <afleming@freescale.com>
> Signed-off-by: Vakul Garg <vakul@freescale.com>
> ---
> v2: 
>    - incorporated review comments on commits message
>    - change unit address of cpu nodes to match the reg property
> 
> arch/powerpc/boot/dts/fsl/b4420si-post.dtsi |   94 ++++++++++
> arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi  |   49 +++++
> arch/powerpc/boot/dts/fsl/b4860si-post.dtsi |  138 ++++++++++++++
> arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi  |   59 ++++++
> arch/powerpc/boot/dts/fsl/b4si-post.dtsi    |  262 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/b4si-pre.dtsi     |   65 +++++++
> 6 files changed, 667 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4si-pre.dtsi

* merged b4si-pre.dtsi into b4860-pre.dtsi & b4420-pre.dtsi
* Make some fixes to GUTs related nodes

applied to next

- k
Kumar Gala April 10, 2013, 3:17 p.m. UTC | #6
On Apr 5, 2013, at 1:33 AM, Shaveta Leekha wrote:

> B4860 and B4420 are similar that share some commonalities
> 
> * common features have been added in b4si-pre.dtsi and b4si-post.dtsi
> * differences are added in respective silicon files of B4860 and B4420
> 
> There are several things missing from the device trees of B4860 and B4420:
> 
> * DPAA related nodes (Qman, Bman, Fman, Rman)
> * DSP related nodes/information
> * serdes, sfp(security fuse processor), thermal,
> gpio, maple, cpri, quad timers nodes
> 
> Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> Signed-off-by: Andy Fleming <afleming@freescale.com>
> Signed-off-by: Vakul Garg <vakul@freescale.com>
> ---
> v2: 
>   - incorporated review comments on commits message
>   - change unit address of cpu nodes to match the reg property
> 
> arch/powerpc/boot/dts/fsl/b4420si-post.dtsi |   94 ++++++++++
> arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi  |   49 +++++
> arch/powerpc/boot/dts/fsl/b4860si-post.dtsi |  138 ++++++++++++++
> arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi  |   59 ++++++
> arch/powerpc/boot/dts/fsl/b4si-post.dtsi    |  262 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/b4si-pre.dtsi     |   65 +++++++
> 6 files changed, 667 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/b4si-pre.dtsi

* merged b4si-pre.dtsi into b4860-pre.dtsi & b4420-pre.dtsi
* Make some fixes to GUTs related nodes

applied to next

- k
diff mbox

Patch

diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
new file mode 100644
index 0000000..bba0c03
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
@@ -0,0 +1,94 @@ 
+/*
+ * B4420 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/include/ "b4si-post.dtsi"
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,b4420-pcie", "fsl,qoriq-pcie-v2.4";
+};
+
+&dcsr {
+	dcsr-epu@0 {
+		compatible = "fsl,b4420-dcsr-epu", "fsl,dcsr-epu";
+	};
+	dcsr-npc {
+		compatible = "fsl,b4420-dcsr-cnpc", "fsl,dcsr-cnpc";
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,b4420-dcsr-dpaa", "fsl,dcsr-dpaa";
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,b4420-dcsr-ocn", "fsl,dcsr-ocn";
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,b4420-dcsr-nal", "fsl,dcsr-nal";
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,b4420-dcsr-rcpm", "fsl,dcsr-rcpm";
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+};
+
+&soc {
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4420-l3-cache-controller", "cache";
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,b4420-corenet-cf";
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2";
+	};
+
+	L2: l2-cache-controller@c20000 {
+		compatible = "fsl,b4420-l2-cache-controller";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
new file mode 100644
index 0000000..8bd1495
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -0,0 +1,49 @@ 
+/*
+ * B4420 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+
+/include/ "b4si-pre.dtsi"
+
+/ {
+	compatible = "fsl,B4420";
+
+	cpus {
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
new file mode 100644
index 0000000..f43910f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
@@ -0,0 +1,138 @@ 
+/*
+ * B4860 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "b4si-post.dtsi"
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,b4860-pcie", "fsl,qoriq-pcie-v2.4";
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,iommu-parent = <&pamu0>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
+	};
+};
+
+&dcsr {
+	dcsr-epu@0 {
+		compatible = "fsl,b4860-dcsr-epu", "fsl,dcsr-epu";
+	};
+	dcsr-npc {
+		compatible = "fsl,b4860-dcsr-cnpc", "fsl,dcsr-cnpc";
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,b4860-dcsr-dpaa", "fsl,dcsr-dpaa";
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,b4860-dcsr-ocn", "fsl,dcsr-ocn";
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,b4860-dcsr-nal", "fsl,dcsr-nal";
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,b4860-dcsr-rcpm", "fsl,dcsr-rcpm";
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+};
+
+&soc {
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 9>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4860-l3-cache-controller", "cache";
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,b4860-corenet-cf";
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2";
+	};
+
+	L2: l2-cache-controller@c20000 {
+		compatible = "fsl,b4860-l2-cache-controller";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
new file mode 100644
index 0000000..9261cab
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -0,0 +1,59 @@ 
+/*
+ * B4860 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "b4si-pre.dtsi"
+
+/ {
+	compatible = "fsl,B4860";
+
+	cpus {
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			next-level-cache = <&L2>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			next-level-cache = <&L2>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
new file mode 100644
index 0000000..06c97a2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -0,0 +1,262 @@ 
+/*
+ * B4420 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,b4-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,b4-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0
+			      94 2 0 0
+			      95 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,b4-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,b4-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,b4-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,b4-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,b4-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 2>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 4>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,b4-corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 0>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible =  "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 1>;
+
+
+		/* PCIe, DMA, SRIO */
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <8 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+
+		/* AXI2, Maple */
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+
+		/* Q/BMan */
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+
+		/* AXI1, FMAN */
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4-device-config";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,b4-rcpm", "fsl,qoriq-rcpm-2";
+		reg = <0xe2000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qonverge-usb2-dr-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		sdhci,auto-cmd12;
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-sec5.3-0.dtsi"
+
+	L2: l2-cache-controller@c20000 {
+		compatible = "fsl,b4-l2-cache-controller";
+                reg = <0xc20000 0x1000>;
+		next-level-cache = <&cpc>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4si-pre.dtsi
new file mode 100644
index 0000000..b6161c8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4si-pre.dtsi
@@ -0,0 +1,65 @@ 
+/*
+ * B4420 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/ {
+	compatible = "fsl,B4";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};