diff mbox

[U-Boot] Tegra: Fix MSELECT clock divisors for T30/T114.

Message ID 1365031032-12739-1-git-send-email-twarren@nvidia.com
State Accepted
Delegated to: Tom Warren
Headers show

Commit Message

Tom Warren April 3, 2013, 11:17 p.m. UTC 
A comparison of registers between our internal NV U-Boot and
u-boot-tegra/next showed some discrepancies in the MSELECT
clock divisor programming. T20 doesn't have a MSELECT clk src reg.

Signed-off-by: Tom Warren <twarren@nvidia.com>
---
 arch/arm/cpu/arm720t/tegra114/cpu.c | 10 ++++------
 arch/arm/cpu/arm720t/tegra30/cpu.c  |  4 ++--
 2 files changed, 6 insertions(+), 8 deletions(-)

Comments

Stephen Warren April 3, 2013, 11:28 p.m. UTC | #1 
On 04/03/2013 05:17 PM, Tom Warren wrote:
> A comparison of registers between our internal NV U-Boot and
> u-boot-tegra/next showed some discrepancies in the MSELECT
> clock divisor programming. T20 doesn't have a MSELECT clk src reg.

I'm not familiar with this code/HW, but it seems OK at a quick glance, so,
Reviewed-by: Stephen Warren <swarren@nvidia.com>
diff mbox

Patch

diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/cpu/arm720t/tegra114/cpu.c
index 6a94179..51ecff7 100644
--- a/arch/arm/cpu/arm720t/tegra114/cpu.c
+++ b/arch/arm/cpu/arm720t/tegra114/cpu.c
@@ -170,15 +170,13 @@  void t114_init_clocks(void)
 	clock_set_enable(PERIPH_ID_MC1, 1);
 	clock_set_enable(PERIPH_ID_DVFS, 1);
 
-	/* Switch MSELECT clock to PLLP (00) */
-	clock_ll_set_source(PERIPH_ID_MSELECT, 0);
-
 	/*
-	 * Clock divider request for 102MHz would setup MSELECT clock as
-	 * 102MHz for PLLP base 408MHz
+	 * Set MSELECT clock source as PLLP (00), and ask for a clock
+	 * divider that would set the MSELECT clock at 102MHz for a
+	 * PLLP base of 408MHz.
 	 */
 	clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0,
-		(NVBL_PLLP_KHZ/102000));
+		CLK_DIVIDER(NVBL_PLLP_KHZ, 102000));
 
 	/* I2C5 (DVC) gets CLK_M and a divisor of 17 */
 	clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16);
diff --git a/arch/arm/cpu/arm720t/tegra30/cpu.c b/arch/arm/cpu/arm720t/tegra30/cpu.c
index dedcdd9..e162357 100644
--- a/arch/arm/cpu/arm720t/tegra30/cpu.c
+++ b/arch/arm/cpu/arm720t/tegra30/cpu.c
@@ -110,8 +110,8 @@  void t30_init_clocks(void)
 	reset_set_enable(PERIPH_ID_MSELECT, 1);
 	clock_set_enable(PERIPH_ID_MSELECT, 1);
 
-	/* Switch MSELECT clock to PLLP (00) */
-	clock_ll_set_source(PERIPH_ID_MSELECT, 0);
+	/* Switch MSELECT clock to PLLP (00) and use a divisor of 2 */
+	clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0, 2);
 
 	/*
 	 * Our high-level clock routines are not available prior to