diff mbox

patch to fix constant math - second small patch -patch ping for next stage 1

Message ID 512D530E.5050204@naturalbridge.com
State New
Headers show

Commit Message

Kenneth Zadeck Feb. 27, 2013, 12:27 a.m. UTC
Here is the second of my wide int patches with the patch rot removed.

I would like to get these pre approved for the next stage 1.
On 10/05/2012 06:48 PM, Kenneth Zadeck wrote:
> This patch adds machinery to genmodes.c so that largest possible sizes 
> of various data structures can be determined at gcc build time. These 
> functions create 3 symbols that are available in insn-modes.h:
> MAX_BITSIZE_MODE_INT - the bitsize of the largest int.
> MAX_BITSIZE_MODE_PARTIAL_INT - the bitsize of the largest partial int.
> MAX_BITSIZE_MODE_ANY_INT - the largest bitsize of any kind of int.
2013-2-26  Kenneth Zadeck <zadeck@naturalbridge.com>

   	* genmodes.c (emit_max_int): New function.
	(emit_insn_modes_h): Added call to emit_max_function.
	* doc/rtl.texi (MAX_BITSIZE_MODE_INT, MAX_BITSIZE_MODE_PARTIAL_INT,
	MAX_BITSIZE_MODE_ANY_INT, MAX_BITSIZE_MODE_ANY_MODE): Added doc.	
	* machmode.def: Fixed comment.

Comments

Richard Biener March 27, 2013, 2:18 p.m. UTC | #1
On Wed, Feb 27, 2013 at 1:27 AM, Kenneth Zadeck
<zadeck@naturalbridge.com> wrote:
> Here is the second of my wide int patches with the patch rot removed.
>
> I would like to get these pre approved for the next stage 1.
> On 10/05/2012 06:48 PM, Kenneth Zadeck wrote:
>>
>> This patch adds machinery to genmodes.c so that largest possible sizes of
>> various data structures can be determined at gcc build time. These functions
>> create 3 symbols that are available in insn-modes.h:
>> MAX_BITSIZE_MODE_INT - the bitsize of the largest int.
>> MAX_BITSIZE_MODE_PARTIAL_INT - the bitsize of the largest partial int.
>> MAX_BITSIZE_MODE_ANY_INT - the largest bitsize of any kind of int.

I remember we have discussed about the need to special-case/handle partial
integer modes.  Do further patches use the _INT and _PARTIAL_INT sizes
at all?  I'm fine with providing MAX_BITSIZE_MODE_ANY_INT.

Richard.
Kenneth Zadeck March 27, 2013, 2:23 p.m. UTC | #2
On 03/27/2013 10:18 AM, Richard Biener wrote:
> On Wed, Feb 27, 2013 at 1:27 AM, Kenneth Zadeck
> <zadeck@naturalbridge.com> wrote:
>> Here is the second of my wide int patches with the patch rot removed.
>>
>> I would like to get these pre approved for the next stage 1.
>> On 10/05/2012 06:48 PM, Kenneth Zadeck wrote:
>>> This patch adds machinery to genmodes.c so that largest possible sizes of
>>> various data structures can be determined at gcc build time. These functions
>>> create 3 symbols that are available in insn-modes.h:
>>> MAX_BITSIZE_MODE_INT - the bitsize of the largest int.
>>> MAX_BITSIZE_MODE_PARTIAL_INT - the bitsize of the largest partial int.
>>> MAX_BITSIZE_MODE_ANY_INT - the largest bitsize of any kind of int.
> I remember we have discussed about the need to special-case/handle partial
> integer modes.  Do further patches use the _INT and _PARTIAL_INT sizes
> at all?  I'm fine with providing MAX_BITSIZE_MODE_ANY_INT.
i do not believe that in the end, those two ended up getting used.    i 
can remove them if you want.

kenny
>
> Richard.
Richard Biener March 27, 2013, 3:07 p.m. UTC | #3
On Wed, Mar 27, 2013 at 3:23 PM, Kenneth Zadeck
<zadeck@naturalbridge.com> wrote:
>
> On 03/27/2013 10:18 AM, Richard Biener wrote:
>>
>> On Wed, Feb 27, 2013 at 1:27 AM, Kenneth Zadeck
>> <zadeck@naturalbridge.com> wrote:
>>>
>>> Here is the second of my wide int patches with the patch rot removed.
>>>
>>> I would like to get these pre approved for the next stage 1.
>>> On 10/05/2012 06:48 PM, Kenneth Zadeck wrote:
>>>>
>>>> This patch adds machinery to genmodes.c so that largest possible sizes
>>>> of
>>>> various data structures can be determined at gcc build time. These
>>>> functions
>>>> create 3 symbols that are available in insn-modes.h:
>>>> MAX_BITSIZE_MODE_INT - the bitsize of the largest int.
>>>> MAX_BITSIZE_MODE_PARTIAL_INT - the bitsize of the largest partial int.
>>>> MAX_BITSIZE_MODE_ANY_INT - the largest bitsize of any kind of int.
>>
>> I remember we have discussed about the need to special-case/handle partial
>> integer modes.  Do further patches use the _INT and _PARTIAL_INT sizes
>> at all?  I'm fine with providing MAX_BITSIZE_MODE_ANY_INT.
>
> i do not believe that in the end, those two ended up getting used.    i can
> remove them if you want.

Yes please.  Ok with that change.

Richard.

> kenny
>>
>>
>> Richard.
>
>
Kenneth Zadeck March 28, 2013, 2:47 p.m. UTC | #4
committed as revision 197200.

kenny


On 03/27/2013 11:07 AM, Richard Biener wrote:
> On Wed, Mar 27, 2013 at 3:23 PM, Kenneth Zadeck
> <zadeck@naturalbridge.com> wrote:
>> On 03/27/2013 10:18 AM, Richard Biener wrote:
>>> On Wed, Feb 27, 2013 at 1:27 AM, Kenneth Zadeck
>>> <zadeck@naturalbridge.com> wrote:
>>>> Here is the second of my wide int patches with the patch rot removed.
>>>>
>>>> I would like to get these pre approved for the next stage 1.
>>>> On 10/05/2012 06:48 PM, Kenneth Zadeck wrote:
>>>>> This patch adds machinery to genmodes.c so that largest possible sizes
>>>>> of
>>>>> various data structures can be determined at gcc build time. These
>>>>> functions
>>>>> create 3 symbols that are available in insn-modes.h:
>>>>> MAX_BITSIZE_MODE_INT - the bitsize of the largest int.
>>>>> MAX_BITSIZE_MODE_PARTIAL_INT - the bitsize of the largest partial int.
>>>>> MAX_BITSIZE_MODE_ANY_INT - the largest bitsize of any kind of int.
>>> I remember we have discussed about the need to special-case/handle partial
>>> integer modes.  Do further patches use the _INT and _PARTIAL_INT sizes
>>> at all?  I'm fine with providing MAX_BITSIZE_MODE_ANY_INT.
>> i do not believe that in the end, those two ended up getting used.    i can
>> remove them if you want.
> Yes please.  Ok with that change.
>
> Richard.
>
>> kenny
>>>
>>> Richard.
>>
diff mbox

Patch

diff --git a/gcc/doc/rtl.texi b/gcc/doc/rtl.texi
index b0b0723..095a642 100644
--- a/gcc/doc/rtl.texi
+++ b/gcc/doc/rtl.texi
@@ -1456,6 +1456,28 @@  Returns the number of units contained in a mode, i.e.,
 Returns the narrowest mode in mode class @var{c}.
 @end table
 
+The following 4 variables are defined on every target.   They can be
+used to allocate buffers that are guaranteed to be large enough to
+hold any value that can be represented on the target.   
+
+@table @code
+@findex MAX_BITSIZE_MODE_INT
+@item MAX_BITSIZE_MODE_INT
+The bitsize of the largest integer mode defined on the target.
+
+@findex MAX_BITSIZE_MODE_PARTIAL_INT
+@item MAX_BITSIZE_MODE_PARTIAL_INT
+The bitsize of the largest partial integer mode defined on the target.
+
+@findex MAX_BITSIZE_MODE_ANY_INT
+@item MAX_BITSIZE_MODE_ANY_INT
+The maximum of MAX_BITSIZE_MODE_INT and MAX_BITSIZE_MODE_PARTIAL_INT.
+
+@findex MAX_BITSIZE_MODE_ANY_MODE
+@item MAX_BITSIZE_MODE_ANY_MODE
+The bitsize of the largest mode on the target.   
+@end table
+
 @findex byte_mode
 @findex word_mode
 The global variables @code{byte_mode} and @code{word_mode} contain modes
diff --git a/gcc/genmodes.c b/gcc/genmodes.c
index 9907d69..f822dcd 100644
--- a/gcc/genmodes.c
+++ b/gcc/genmodes.c
@@ -848,6 +848,38 @@  calc_wider_mode (void)
 
 #define print_closer() puts ("};")
 
+/* Compute the max bitsize of some of the classes of integers.  It may
+   be that there are needs for the other integer classes, and this
+   code is easy to extend.  */
+static void
+emit_max_int (void)
+{
+  unsigned int max, mmax;
+  struct mode_data *i;
+  int j;
+
+  puts ("");
+  for (max = 1, i = modes[MODE_INT]; i; i = i->next)
+    if (max < i->bytesize)
+	max = i->bytesize;
+  printf ("#define MAX_BITSIZE_MODE_INT %d*BITS_PER_UNIT\n", max);
+  mmax = max;
+  for (max = 1, i = modes[MODE_PARTIAL_INT]; i; i = i->next)
+    if (max < i->bytesize)
+	max = i->bytesize;
+  printf ("#define MAX_BITSIZE_MODE_PARTIAL_INT %d*BITS_PER_UNIT\n", max);
+  if (max > mmax)
+    mmax = max;
+  printf ("#define MAX_BITSIZE_MODE_ANY_INT %d*BITS_PER_UNIT\n", mmax);
+
+  mmax = 0;
+  for (j = 0; j < MAX_MODE_CLASS; j++)
+    for (i = modes[j]; i; i = i->next)
+      if (mmax < i->bytesize)
+	mmax = i->bytesize;
+  printf ("#define MAX_BITSIZE_MODE_ANY_MODE %d*BITS_PER_UNIT\n", mmax);
+}
+
 static void
 emit_insn_modes_h (void)
 {
@@ -912,6 +944,7 @@  enum machine_mode\n{");
 #endif
   printf ("#define CONST_MODE_IBIT%s\n", adj_ibit ? "" : " const");
   printf ("#define CONST_MODE_FBIT%s\n", adj_fbit ? "" : " const");
+  emit_max_int ();
   puts ("\
 \n\
 #endif /* insn-modes.h */");
diff --git a/gcc/machmode.def b/gcc/machmode.def
index 4b58150..1062f18 100644
--- a/gcc/machmode.def
+++ b/gcc/machmode.def
@@ -179,8 +179,11 @@  RANDOM_MODE (BLK);
 FRACTIONAL_INT_MODE (BI, 1, 1);
 
 /* Basic integer modes.  We go up to TI in generic code (128 bits).
-   The name OI is reserved for a 256-bit type (needed by some back ends).
-   FIXME TI shouldn't be generically available either.  */
+   TImode is needed here because the some front ends now genericly
+   support __int128.  If the front ends decide to generically support
+   larger types, then corresponding modes must be added here.  The
+   name OI is reserved for a 256-bit type (needed by some back ends).
+    */
 INT_MODE (QI, 1);
 INT_MODE (HI, 2);
 INT_MODE (SI, 4);