Message ID | 20130322201839.GL26945@bill-the-cat |
---|---|
State | Accepted |
Delegated to: | Albert ARIBAUD |
Headers | show |
Hi Tom, On Fri, 22 Mar 2013 16:18:39 -0400, Tom Rini <trini@ti.com> wrote: > Hello, > > The following changes since commit 131a1e603b3a8438b84b41940bc6a2051a36e087: > > ARM: rpi_b: enable SD controller, add related env/cmds (2013-03-20 15:32:16 +0100) > > are available in the git repository at: > > git://git.denx.de/u-boot-ti.git master > > for you to fetch changes up to e0c60ef48bc600bcd06c08a436abfca1a963a1e7: > > mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio could be used (2013-03-22 12:01:15 -0400) > > ---------------------------------------------------------------- > Enric Balletbo i Serra (2): > ARM: AM33XX: Fix typo that causes an AM duplication in CPU name. > igep00x0: Enable CONFIG_CMD_BOOTZ > > Koen Kooi (3): > am335x_evm: add support for BeagleBone Black DT name > am335x_evm: Enable CMD_EXT4 and CMD_FS_GENERIC, add bootpart to env > am335x_evm: Add more variables and switch to DT booting. > > Mark Jackson (2): > Allow AM335x MPU core clock speed to be specified in the board config file > Initialise correct GPMC WAITx irq for AM33xx > > Matt Porter (9): > am33xx: convert defines from am33xx-specific to generic names > am33xx: refactor emif4/ddr to support multiple EMIF instances > am33xx: refactor am33xx clocks and add ti814x support > am33xx: refactor am33xx mux support and add ti814x support > am33xx: add ti814x specific register definitions > am33xx: add dmm support to emif4 library > am33xx: support ti814x mmc reference clock > ns16550: enable quirks for ti814x > ti814x_evm: add ti814x evm board support > > Nikita Kiryanov (1): > cm-t35: add support for loading splash image from NAND > > Peter Korsgaard (2): > mmc: mmc_getcd/getwp: use sensible defaults > mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio could be used > > Steve Kipisz (1): > am33xx:ddr:Fix config_sdram to work for all DDR > > Tom Rini (3): > am33xx: Add required includes to some omap/am33xx code > am335x_evm: Add better timings for the new BeagleBoard DDR3 part > arm: Correct CONFIG_STANDALONE_LOAD_ADDR for AM33XX/OMAP* platforms > > hvaibhav@ti.com (1): > am335x: Enable DDR PHY dynamic power down bit for DDR3 boards I'd rather have a full name on this one. Amicalement,
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 03/24/2013 12:48 PM, Albert ARIBAUD wrote: > Hi Tom, > > On Fri, 22 Mar 2013 16:18:39 -0400, Tom Rini <trini@ti.com> wrote: > >> Hello, >> >> The following changes since commit >> 131a1e603b3a8438b84b41940bc6a2051a36e087: >> >> ARM: rpi_b: enable SD controller, add related env/cmds >> (2013-03-20 15:32:16 +0100) >> >> are available in the git repository at: >> >> git://git.denx.de/u-boot-ti.git master >> >> for you to fetch changes up to >> e0c60ef48bc600bcd06c08a436abfca1a963a1e7: >> >> mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio >> could be used (2013-03-22 12:01:15 -0400) >> >> ---------------------------------------------------------------- >> Enric Balletbo i Serra (2): ARM: AM33XX: Fix typo that causes >> an AM duplication in CPU name. igep00x0: Enable CONFIG_CMD_BOOTZ >> >> Koen Kooi (3): am335x_evm: add support for BeagleBone Black DT >> name am335x_evm: Enable CMD_EXT4 and CMD_FS_GENERIC, add >> bootpart to env am335x_evm: Add more variables and switch to DT >> booting. >> >> Mark Jackson (2): Allow AM335x MPU core clock speed to be >> specified in the board config file Initialise correct GPMC WAITx >> irq for AM33xx >> >> Matt Porter (9): am33xx: convert defines from am33xx-specific to >> generic names am33xx: refactor emif4/ddr to support multiple >> EMIF instances am33xx: refactor am33xx clocks and add ti814x >> support am33xx: refactor am33xx mux support and add ti814x >> support am33xx: add ti814x specific register definitions am33xx: >> add dmm support to emif4 library am33xx: support ti814x mmc >> reference clock ns16550: enable quirks for ti814x ti814x_evm: add >> ti814x evm board support >> >> Nikita Kiryanov (1): cm-t35: add support for loading splash >> image from NAND >> >> Peter Korsgaard (2): mmc: mmc_getcd/getwp: use sensible defaults >> mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio >> could be used >> >> Steve Kipisz (1): am33xx:ddr:Fix config_sdram to work for all >> DDR >> >> Tom Rini (3): am33xx: Add required includes to some omap/am33xx >> code am335x_evm: Add better timings for the new BeagleBoard DDR3 >> part arm: Correct CONFIG_STANDALONE_LOAD_ADDR for AM33XX/OMAP* >> platforms >> >> hvaibhav@ti.com (1): am335x: Enable DDR PHY dynamic power down >> bit for DDR3 boards > > I'd rather have a full name on this one. Fixed, pushed and author reminded, thanks / sorry! - -- Tom -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRTy79AAoJENk4IS6UOR1WiJkP/j9vBLIYOv9+8y90Y+DQBAcr GRlhpqy5557zV0FSmksfwfpjbWQh2Kt1uQWdhBpyJssm1bRLbP4LsskktgSEkcy0 3ksZ2huPYCgvKgS3OolDauYk45/UxHirYlG57uDNolrD50C30PlSzPXAWbl/ARwX 3h1Q600REZ/GBvjbpR8j4mXt3pxRGk7gRB3RoS4a9/KnvhN4pLS73UYVhbmdWyd2 xsa9ovo13ZCS6Uy0WdTeO+X7Q5T2EuYMJrUIcHNd5tRLyCmnjky42mgUVr6IjTy6 eNI5xaCum73OSwQd8OCmfHee+a1QAEkVWVkluRfeHOMYEMHP6pv93QCM3Ub2VRBZ +/cDeMT+okoA2QJg13iyI8WhrmzgZlgf2Ojg5Lcz+8BOIHcCQrYC/WzAWrMegg4u 9vmm+6fY9hc0uFpKElNR5FLdYWkbT4b548bK7SEuMiCE48ZtN6P8jYwy1KfeLv4D aBdC326Z1MGFc5QIR8kHFFFD69bSAvAOCpv4BHGPImJ4KuvtxDOCA7N2nEpsHUqD PX6wL9bU9fCkRbaZYBh/qZ0JjkmwXkWo4nbi+GpLxwxHSolWXFlIr/EVz0nf1u/8 D5DL0QAQYZ/686p4Jd72TogFIU915n5OlI/OL/zWsLL2Qo87TTSdwOSLdlBxyHxg GxMBAxaa+JFmbFdL6Hs3 =bFhU -----END PGP SIGNATURE-----
Hi Tom, On Sun, 24 Mar 2013 12:51:09 -0400, Tom Rini <trini@ti.com> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 03/24/2013 12:48 PM, Albert ARIBAUD wrote: > > Hi Tom, > > > > On Fri, 22 Mar 2013 16:18:39 -0400, Tom Rini <trini@ti.com> wrote: > > > >> Hello, > >> > >> The following changes since commit > >> 131a1e603b3a8438b84b41940bc6a2051a36e087: > >> > >> ARM: rpi_b: enable SD controller, add related env/cmds > >> (2013-03-20 15:32:16 +0100) > >> > >> are available in the git repository at: > >> > >> git://git.denx.de/u-boot-ti.git master > >> > >> for you to fetch changes up to > >> e0c60ef48bc600bcd06c08a436abfca1a963a1e7: > >> > >> mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio > >> could be used (2013-03-22 12:01:15 -0400) > >> > >> ---------------------------------------------------------------- > >> Enric Balletbo i Serra (2): ARM: AM33XX: Fix typo that causes > >> an AM duplication in CPU name. igep00x0: Enable CONFIG_CMD_BOOTZ > >> > >> Koen Kooi (3): am335x_evm: add support for BeagleBone Black DT > >> name am335x_evm: Enable CMD_EXT4 and CMD_FS_GENERIC, add > >> bootpart to env am335x_evm: Add more variables and switch to DT > >> booting. > >> > >> Mark Jackson (2): Allow AM335x MPU core clock speed to be > >> specified in the board config file Initialise correct GPMC WAITx > >> irq for AM33xx > >> > >> Matt Porter (9): am33xx: convert defines from am33xx-specific to > >> generic names am33xx: refactor emif4/ddr to support multiple > >> EMIF instances am33xx: refactor am33xx clocks and add ti814x > >> support am33xx: refactor am33xx mux support and add ti814x > >> support am33xx: add ti814x specific register definitions am33xx: > >> add dmm support to emif4 library am33xx: support ti814x mmc > >> reference clock ns16550: enable quirks for ti814x ti814x_evm: add > >> ti814x evm board support > >> > >> Nikita Kiryanov (1): cm-t35: add support for loading splash > >> image from NAND > >> > >> Peter Korsgaard (2): mmc: mmc_getcd/getwp: use sensible defaults > >> mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio > >> could be used > >> > >> Steve Kipisz (1): am33xx:ddr:Fix config_sdram to work for all > >> DDR > >> > >> Tom Rini (3): am33xx: Add required includes to some omap/am33xx > >> code am335x_evm: Add better timings for the new BeagleBoard DDR3 > >> part arm: Correct CONFIG_STANDALONE_LOAD_ADDR for AM33XX/OMAP* > >> platforms > >> > >> hvaibhav@ti.com (1): am335x: Enable DDR PHY dynamic power down > >> bit for DDR3 boards > > > > I'd rather have a full name on this one. > > Fixed, pushed and author reminded, thanks / sorry! No problem :) -- applied to u-boot-arm/master, thanks! Amicalement,