Message ID | 1363770002-4521-1-git-send-email-fred.konrad@greensocs.com |
---|---|
State | New |
Headers | show |
On Wed, 20 Mar 2013 10:00:01 +0100 fred.konrad@greensocs.com wrote: > From: KONRAD Frederic <fred.konrad@greensocs.com> > > The virtio-blk-x configuration is not in sync with virtio-blk configuration. > So this patch remove the virtio-blk-x configuration field, and use virtio-blk > one for setting the properties. > > This also remove a useless configuration copy in virtio_blk_device_init. > > Note that this is on top of "virtio-ccw queue as of 2013/03/20". Seems to work on both s390-virtio and virtio-ccw (comes up and I can specify e.g. config-wce). info qtree still shows the properties for both virtio-blk-x and virtio-blk, but they are in sync now. > > Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> > --- > hw/s390x/s390-virtio-bus.c | 4 ++-- > hw/s390x/s390-virtio-bus.h | 1 - > hw/s390x/virtio-ccw.c | 4 ++-- > hw/s390x/virtio-ccw.h | 1 - > hw/virtio-blk.c | 7 ------- > hw/virtio-blk.h | 2 -- > hw/virtio-pci.c | 7 ++++--- > hw/virtio-pci.h | 1 - > 8 files changed, 8 insertions(+), 19 deletions(-) > > diff --git a/hw/s390x/s390-virtio-bus.c b/hw/s390x/s390-virtio-bus.c > index c5d5456..b6f9682 100644 > --- a/hw/s390x/s390-virtio-bus.c > +++ b/hw/s390x/s390-virtio-bus.c > @@ -166,7 +166,7 @@ static int s390_virtio_blk_init(VirtIOS390Device *s390_dev) > { > VirtIOBlkS390 *dev = VIRTIO_BLK_S390(s390_dev); > DeviceState *vdev = DEVICE(&dev->vdev); > - virtio_blk_set_conf(vdev, &(dev->blk)); > + > qdev_set_parent_bus(vdev, BUS(&s390_dev->bus)); > if (qdev_init(vdev) < 0) { > return -1; > @@ -435,7 +435,7 @@ static const TypeInfo s390_virtio_net = { > }; > > static Property s390_virtio_blk_properties[] = { > - DEFINE_VIRTIO_BLK_PROPERTIES(VirtIOBlkS390, blk), > + DEFINE_VIRTIO_BLK_PROPERTIES(VirtIOBlkS390, vdev.blk), > DEFINE_PROP_END_OF_LIST(), > }; > > diff --git a/hw/s390x/s390-virtio-bus.h b/hw/s390x/s390-virtio-bus.h > index 1a63411..05347bc 100644 > --- a/hw/s390x/s390-virtio-bus.h > +++ b/hw/s390x/s390-virtio-bus.h > @@ -128,7 +128,6 @@ void s390_virtio_reset_idx(VirtIOS390Device *dev); > typedef struct VirtIOBlkS390 { > VirtIOS390Device parent_obj; > VirtIOBlock vdev; > - VirtIOBlkConf blk; > } VirtIOBlkS390; > > > diff --git a/hw/s390x/virtio-ccw.c b/hw/s390x/virtio-ccw.c > index 4c44b7e..4a10bd6 100644 > --- a/hw/s390x/virtio-ccw.c > +++ b/hw/s390x/virtio-ccw.c > @@ -574,7 +574,7 @@ static int virtio_ccw_blk_init(VirtioCcwDevice *ccw_dev) > { > VirtIOBlkCcw *dev = VIRTIO_BLK_CCW(ccw_dev); > DeviceState *vdev = DEVICE(&dev->vdev); > - virtio_blk_set_conf(vdev, &(dev->blk)); > + > qdev_set_parent_bus(vdev, BUS(&ccw_dev->bus)); > if (qdev_init(vdev) < 0) { > return -1; > @@ -757,7 +757,7 @@ static const TypeInfo virtio_ccw_net = { > static Property virtio_ccw_blk_properties[] = { > DEFINE_PROP_STRING("devno", VirtioCcwDevice, bus_id), > DEFINE_VIRTIO_BLK_FEATURES(VirtioCcwDevice, host_features[0]), > - DEFINE_VIRTIO_BLK_PROPERTIES(VirtIOBlkCcw, blk), > + DEFINE_VIRTIO_BLK_PROPERTIES(VirtIOBlkCcw, vdev.blk), > DEFINE_PROP_END_OF_LIST(), > }; > > diff --git a/hw/s390x/virtio-ccw.h b/hw/s390x/virtio-ccw.h > index 3993bc5..8f7c3a5 100644 > --- a/hw/s390x/virtio-ccw.h > +++ b/hw/s390x/virtio-ccw.h > @@ -102,7 +102,6 @@ typedef struct VirtualCssBus { > typedef struct VirtIOBlkCcw { > VirtioCcwDevice parent_obj; > VirtIOBlock vdev; > - VirtIOBlkConf blk; > } VirtIOBlkCcw; > > > diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c > index f2143fd..0414a8a 100644 > --- a/hw/virtio-blk.c > +++ b/hw/virtio-blk.c > @@ -619,12 +619,6 @@ static const BlockDevOps virtio_block_ops = { > .resize_cb = virtio_blk_resize, > }; > > -void virtio_blk_set_conf(DeviceState *dev, VirtIOBlkConf *blk) > -{ > - VirtIOBlock *s = VIRTIO_BLK(dev); > - memcpy(&(s->blk), blk, sizeof(struct VirtIOBlkConf)); > -} > - > static int virtio_blk_device_init(VirtIODevice *vdev) > { > DeviceState *qdev = DEVICE(vdev); > @@ -656,7 +650,6 @@ static int virtio_blk_device_init(VirtIODevice *vdev) > vdev->reset = virtio_blk_reset; > s->bs = blk->conf.bs; > s->conf = &blk->conf; > - memcpy(&(s->blk), blk, sizeof(struct VirtIOBlkConf)); > s->rq = NULL; > s->sector_mask = (s->conf->logical_block_size / BDRV_SECTOR_SIZE) - 1; > > diff --git a/hw/virtio-blk.h b/hw/virtio-blk.h > index 8c6c78b..e228057 100644 > --- a/hw/virtio-blk.h > +++ b/hw/virtio-blk.h > @@ -148,6 +148,4 @@ typedef struct VirtIOBlock { > DEFINE_PROP_BIT("config-wce", _state, _field.config_wce, 0, true) > #endif /* __linux__ */ > > -void virtio_blk_set_conf(DeviceState *dev, VirtIOBlkConf *blk); > - > #endif > diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c > index f3ece78..31a78de 100644 > --- a/hw/virtio-pci.c > +++ b/hw/virtio-pci.c > @@ -1405,10 +1405,11 @@ static Property virtio_blk_pci_properties[] = { > VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true), > DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2), > #ifdef CONFIG_VIRTIO_BLK_DATA_PLANE > - DEFINE_PROP_BIT("x-data-plane", VirtIOBlkPCI, blk.data_plane, 0, false), > + DEFINE_PROP_BIT("x-data-plane", VirtIOBlkPCI, vdev.blk.data_plane, 0, > + false), > #endif > DEFINE_VIRTIO_BLK_FEATURES(VirtIOPCIProxy, host_features), > - DEFINE_VIRTIO_BLK_PROPERTIES(VirtIOBlkPCI, blk), > + DEFINE_VIRTIO_BLK_PROPERTIES(VirtIOBlkPCI, vdev.blk), > DEFINE_PROP_END_OF_LIST(), > }; > > @@ -1416,7 +1417,7 @@ static int virtio_blk_pci_init(VirtIOPCIProxy *vpci_dev) > { > VirtIOBlkPCI *dev = VIRTIO_BLK_PCI(vpci_dev); > DeviceState *vdev = DEVICE(&dev->vdev); > - virtio_blk_set_conf(vdev, &(dev->blk)); > + > qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus)); > if (qdev_init(vdev) < 0) { > return -1; > diff --git a/hw/virtio-pci.h b/hw/virtio-pci.h > index a9dbfff..fd6bcb2 100644 > --- a/hw/virtio-pci.h > +++ b/hw/virtio-pci.h > @@ -100,7 +100,6 @@ struct VirtIOPCIProxy { > struct VirtIOBlkPCI { > VirtIOPCIProxy parent_obj; > VirtIOBlock vdev; > - VirtIOBlkConf blk; > }; > > void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev);
On Wed, Mar 20, 2013 at 10:00:01AM +0100, fred.konrad@greensocs.com wrote: > From: KONRAD Frederic <fred.konrad@greensocs.com> > > The virtio-blk-x configuration is not in sync with virtio-blk configuration. > So this patch remove the virtio-blk-x configuration field, and use virtio-blk > one for setting the properties. > > This also remove a useless configuration copy in virtio_blk_device_init. > > Note that this is on top of "virtio-ccw queue as of 2013/03/20". Look fine, although I haven't looked into the latest virtio-ccw or virtio-blk refactoring. Stefan
Am 20.03.2013 um 10:00 hat fred.konrad@greensocs.com geschrieben: > From: KONRAD Frederic <fred.konrad@greensocs.com> > > The virtio-blk-x configuration is not in sync with virtio-blk configuration. > So this patch remove the virtio-blk-x configuration field, and use virtio-blk > one for setting the properties. > > This also remove a useless configuration copy in virtio_blk_device_init. > > Note that this is on top of "virtio-ccw queue as of 2013/03/20". > > Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> This patch doesn't seem to apply any more. Kevin
On 22/03/2013 17:58, Kevin Wolf wrote: > Am 20.03.2013 um 10:00 hat fred.konrad@greensocs.com geschrieben: >> From: KONRAD Frederic <fred.konrad@greensocs.com> >> >> The virtio-blk-x configuration is not in sync with virtio-blk configuration. >> So this patch remove the virtio-blk-x configuration field, and use virtio-blk >> one for setting the properties. >> >> This also remove a useless configuration copy in virtio_blk_device_init. >> >> Note that this is on top of "virtio-ccw queue as of 2013/03/20". >> >> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> > This patch doesn't seem to apply any more. > > Kevin Sure, It's on top of virtio-ccw queue as of 2013/03/20. I expected Cornelia's series to be upstreamed quickly. Fred
Am 22.03.2013 um 19:17 hat KONRAD Frédéric geschrieben: > On 22/03/2013 17:58, Kevin Wolf wrote: > >Am 20.03.2013 um 10:00 hat fred.konrad@greensocs.com geschrieben: > >>From: KONRAD Frederic <fred.konrad@greensocs.com> > >> > >>The virtio-blk-x configuration is not in sync with virtio-blk configuration. > >>So this patch remove the virtio-blk-x configuration field, and use virtio-blk > >>one for setting the properties. > >> > >>This also remove a useless configuration copy in virtio_blk_device_init. > >> > >>Note that this is on top of "virtio-ccw queue as of 2013/03/20". > >> > >>Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> > >This patch doesn't seem to apply any more. > > > >Kevin > Sure, > > It's on top of virtio-ccw queue as of 2013/03/20. > > I expected Cornelia's series to be upstreamed quickly. Ah, sorry, I missed that part in the commit message. Should this be included in the block tree some time next week then, or is it supposed to go in through a different tree? Kevin
On 22/03/2013 19:52, Kevin Wolf wrote: > Am 22.03.2013 um 19:17 hat KONRAD Frédéric geschrieben: >> On 22/03/2013 17:58, Kevin Wolf wrote: >>> Am 20.03.2013 um 10:00 hat fred.konrad@greensocs.com geschrieben: >>>> From: KONRAD Frederic <fred.konrad@greensocs.com> >>>> >>>> The virtio-blk-x configuration is not in sync with virtio-blk configuration. >>>> So this patch remove the virtio-blk-x configuration field, and use virtio-blk >>>> one for setting the properties. >>>> >>>> This also remove a useless configuration copy in virtio_blk_device_init. >>>> >>>> Note that this is on top of "virtio-ccw queue as of 2013/03/20". >>>> >>>> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> >>> This patch doesn't seem to apply any more. >>> >>> Kevin >> Sure, >> >> It's on top of virtio-ccw queue as of 2013/03/20. >> >> I expected Cornelia's series to be upstreamed quickly. > Ah, sorry, I missed that part in the commit message. Should this be > included in the block tree some time next week then, or is it supposed > to go in through a different tree? > > Kevin I don't know, I didn't target a specific tree for that. Thanks, Fred
KONRAD Frédéric <fred.konrad@greensocs.com> writes: > On 22/03/2013 19:52, Kevin Wolf wrote: >> Am 22.03.2013 um 19:17 hat KONRAD Frédéric geschrieben: >>> On 22/03/2013 17:58, Kevin Wolf wrote: >>>> Am 20.03.2013 um 10:00 hat fred.konrad@greensocs.com geschrieben: >>>>> From: KONRAD Frederic <fred.konrad@greensocs.com> >>>>> >>>>> The virtio-blk-x configuration is not in sync with virtio-blk configuration. >>>>> So this patch remove the virtio-blk-x configuration field, and use virtio-blk >>>>> one for setting the properties. >>>>> >>>>> This also remove a useless configuration copy in virtio_blk_device_init. >>>>> >>>>> Note that this is on top of "virtio-ccw queue as of 2013/03/20". >>>>> >>>>> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> >>>> This patch doesn't seem to apply any more. >>>> >>>> Kevin >>> Sure, >>> >>> It's on top of virtio-ccw queue as of 2013/03/20. >>> >>> I expected Cornelia's series to be upstreamed quickly. >> Ah, sorry, I missed that part in the commit message. Should this be >> included in the block tree some time next week then, or is it supposed >> to go in through a different tree? >> >> Kevin > I don't know, I didn't target a specific tree for that. Cornelia's tree is now merged FWIW. I would expect this to go through the block tree since dataplane was introduced through that tree. Regards, Anthony Liguori > > Thanks, > Fred
On 22/03/2013 20:41, Anthony Liguori wrote: > KONRAD Frédéric <fred.konrad@greensocs.com> writes: > >> On 22/03/2013 19:52, Kevin Wolf wrote: >>> Am 22.03.2013 um 19:17 hat KONRAD Frédéric geschrieben: >>>> On 22/03/2013 17:58, Kevin Wolf wrote: >>>>> Am 20.03.2013 um 10:00 hat fred.konrad@greensocs.com geschrieben: >>>>>> From: KONRAD Frederic <fred.konrad@greensocs.com> >>>>>> >>>>>> The virtio-blk-x configuration is not in sync with virtio-blk configuration. >>>>>> So this patch remove the virtio-blk-x configuration field, and use virtio-blk >>>>>> one for setting the properties. >>>>>> >>>>>> This also remove a useless configuration copy in virtio_blk_device_init. >>>>>> >>>>>> Note that this is on top of "virtio-ccw queue as of 2013/03/20". >>>>>> >>>>>> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> >>>>> This patch doesn't seem to apply any more. >>>>> >>>>> Kevin >>>> Sure, >>>> >>>> It's on top of virtio-ccw queue as of 2013/03/20. >>>> >>>> I expected Cornelia's series to be upstreamed quickly. >>> Ah, sorry, I missed that part in the commit message. Should this be >>> included in the block tree some time next week then, or is it supposed >>> to go in through a different tree? >>> >>> Kevin >> I don't know, I didn't target a specific tree for that. > Cornelia's tree is now merged FWIW. I would expect this to go through > the block tree since dataplane was introduced through that tree. > > Regards, > > Anthony Liguori Ok, so can this fix be applied in this tree? Thanks, Fred > >> Thanks, >> Fred
Am 26.03.2013 um 17:15 hat KONRAD Frédéric geschrieben: > On 22/03/2013 20:41, Anthony Liguori wrote: > >KONRAD Frédéric <fred.konrad@greensocs.com> writes: > > > >>On 22/03/2013 19:52, Kevin Wolf wrote: > >>>Am 22.03.2013 um 19:17 hat KONRAD Frédéric geschrieben: > >>>>On 22/03/2013 17:58, Kevin Wolf wrote: > >>>>>Am 20.03.2013 um 10:00 hat fred.konrad@greensocs.com geschrieben: > >>>>>>From: KONRAD Frederic <fred.konrad@greensocs.com> > >>>>>> > >>>>>>The virtio-blk-x configuration is not in sync with virtio-blk configuration. > >>>>>>So this patch remove the virtio-blk-x configuration field, and use virtio-blk > >>>>>>one for setting the properties. > >>>>>> > >>>>>>This also remove a useless configuration copy in virtio_blk_device_init. > >>>>>> > >>>>>>Note that this is on top of "virtio-ccw queue as of 2013/03/20". > >>>>>> > >>>>>>Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> > >>>>>This patch doesn't seem to apply any more. > >>>>> > >>>>>Kevin > >>>>Sure, > >>>> > >>>>It's on top of virtio-ccw queue as of 2013/03/20. > >>>> > >>>>I expected Cornelia's series to be upstreamed quickly. > >>>Ah, sorry, I missed that part in the commit message. Should this be > >>>included in the block tree some time next week then, or is it supposed > >>>to go in through a different tree? > >>> > >>>Kevin > >>I don't know, I didn't target a specific tree for that. > >Cornelia's tree is now merged FWIW. I would expect this to go through > >the block tree since dataplane was introduced through that tree. > > > >Regards, > > > >Anthony Liguori > > Ok, so can this fix be applied in this tree? Thanks, applied to the block branch. Kevin
On 02/04/2013 16:49, Kevin Wolf wrote: > Am 26.03.2013 um 17:15 hat KONRAD Frédéric geschrieben: >> On 22/03/2013 20:41, Anthony Liguori wrote: >>> KONRAD Frédéric <fred.konrad@greensocs.com> writes: >>> >>>> On 22/03/2013 19:52, Kevin Wolf wrote: >>>>> Am 22.03.2013 um 19:17 hat KONRAD Frédéric geschrieben: >>>>>> On 22/03/2013 17:58, Kevin Wolf wrote: >>>>>>> Am 20.03.2013 um 10:00 hat fred.konrad@greensocs.com geschrieben: >>>>>>>> From: KONRAD Frederic <fred.konrad@greensocs.com> >>>>>>>> >>>>>>>> The virtio-blk-x configuration is not in sync with virtio-blk configuration. >>>>>>>> So this patch remove the virtio-blk-x configuration field, and use virtio-blk >>>>>>>> one for setting the properties. >>>>>>>> >>>>>>>> This also remove a useless configuration copy in virtio_blk_device_init. >>>>>>>> >>>>>>>> Note that this is on top of "virtio-ccw queue as of 2013/03/20". >>>>>>>> >>>>>>>> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> >>>>>>> This patch doesn't seem to apply any more. >>>>>>> >>>>>>> Kevin >>>>>> Sure, >>>>>> >>>>>> It's on top of virtio-ccw queue as of 2013/03/20. >>>>>> >>>>>> I expected Cornelia's series to be upstreamed quickly. >>>>> Ah, sorry, I missed that part in the commit message. Should this be >>>>> included in the block tree some time next week then, or is it supposed >>>>> to go in through a different tree? >>>>> >>>>> Kevin >>>> I don't know, I didn't target a specific tree for that. >>> Cornelia's tree is now merged FWIW. I would expect this to go through >>> the block tree since dataplane was introduced through that tree. >>> >>> Regards, >>> >>> Anthony Liguori >> Ok, so can this fix be applied in this tree? > Thanks, applied to the block branch. > > Kevin thanks, Fred
diff --git a/hw/s390x/s390-virtio-bus.c b/hw/s390x/s390-virtio-bus.c index c5d5456..b6f9682 100644 --- a/hw/s390x/s390-virtio-bus.c +++ b/hw/s390x/s390-virtio-bus.c @@ -166,7 +166,7 @@ static int s390_virtio_blk_init(VirtIOS390Device *s390_dev) { VirtIOBlkS390 *dev = VIRTIO_BLK_S390(s390_dev); DeviceState *vdev = DEVICE(&dev->vdev); - virtio_blk_set_conf(vdev, &(dev->blk)); + qdev_set_parent_bus(vdev, BUS(&s390_dev->bus)); if (qdev_init(vdev) < 0) { return -1; @@ -435,7 +435,7 @@ static const TypeInfo s390_virtio_net = { }; static Property s390_virtio_blk_properties[] = { - DEFINE_VIRTIO_BLK_PROPERTIES(VirtIOBlkS390, blk), + DEFINE_VIRTIO_BLK_PROPERTIES(VirtIOBlkS390, vdev.blk), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/s390x/s390-virtio-bus.h b/hw/s390x/s390-virtio-bus.h index 1a63411..05347bc 100644 --- a/hw/s390x/s390-virtio-bus.h +++ b/hw/s390x/s390-virtio-bus.h @@ -128,7 +128,6 @@ void s390_virtio_reset_idx(VirtIOS390Device *dev); typedef struct VirtIOBlkS390 { VirtIOS390Device parent_obj; VirtIOBlock vdev; - VirtIOBlkConf blk; } VirtIOBlkS390; diff --git a/hw/s390x/virtio-ccw.c b/hw/s390x/virtio-ccw.c index 4c44b7e..4a10bd6 100644 --- a/hw/s390x/virtio-ccw.c +++ b/hw/s390x/virtio-ccw.c @@ -574,7 +574,7 @@ static int virtio_ccw_blk_init(VirtioCcwDevice *ccw_dev) { VirtIOBlkCcw *dev = VIRTIO_BLK_CCW(ccw_dev); DeviceState *vdev = DEVICE(&dev->vdev); - virtio_blk_set_conf(vdev, &(dev->blk)); + qdev_set_parent_bus(vdev, BUS(&ccw_dev->bus)); if (qdev_init(vdev) < 0) { return -1; @@ -757,7 +757,7 @@ static const TypeInfo virtio_ccw_net = { static Property virtio_ccw_blk_properties[] = { DEFINE_PROP_STRING("devno", VirtioCcwDevice, bus_id), DEFINE_VIRTIO_BLK_FEATURES(VirtioCcwDevice, host_features[0]), - DEFINE_VIRTIO_BLK_PROPERTIES(VirtIOBlkCcw, blk), + DEFINE_VIRTIO_BLK_PROPERTIES(VirtIOBlkCcw, vdev.blk), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/s390x/virtio-ccw.h b/hw/s390x/virtio-ccw.h index 3993bc5..8f7c3a5 100644 --- a/hw/s390x/virtio-ccw.h +++ b/hw/s390x/virtio-ccw.h @@ -102,7 +102,6 @@ typedef struct VirtualCssBus { typedef struct VirtIOBlkCcw { VirtioCcwDevice parent_obj; VirtIOBlock vdev; - VirtIOBlkConf blk; } VirtIOBlkCcw; diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c index f2143fd..0414a8a 100644 --- a/hw/virtio-blk.c +++ b/hw/virtio-blk.c @@ -619,12 +619,6 @@ static const BlockDevOps virtio_block_ops = { .resize_cb = virtio_blk_resize, }; -void virtio_blk_set_conf(DeviceState *dev, VirtIOBlkConf *blk) -{ - VirtIOBlock *s = VIRTIO_BLK(dev); - memcpy(&(s->blk), blk, sizeof(struct VirtIOBlkConf)); -} - static int virtio_blk_device_init(VirtIODevice *vdev) { DeviceState *qdev = DEVICE(vdev); @@ -656,7 +650,6 @@ static int virtio_blk_device_init(VirtIODevice *vdev) vdev->reset = virtio_blk_reset; s->bs = blk->conf.bs; s->conf = &blk->conf; - memcpy(&(s->blk), blk, sizeof(struct VirtIOBlkConf)); s->rq = NULL; s->sector_mask = (s->conf->logical_block_size / BDRV_SECTOR_SIZE) - 1; diff --git a/hw/virtio-blk.h b/hw/virtio-blk.h index 8c6c78b..e228057 100644 --- a/hw/virtio-blk.h +++ b/hw/virtio-blk.h @@ -148,6 +148,4 @@ typedef struct VirtIOBlock { DEFINE_PROP_BIT("config-wce", _state, _field.config_wce, 0, true) #endif /* __linux__ */ -void virtio_blk_set_conf(DeviceState *dev, VirtIOBlkConf *blk); - #endif diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c index f3ece78..31a78de 100644 --- a/hw/virtio-pci.c +++ b/hw/virtio-pci.c @@ -1405,10 +1405,11 @@ static Property virtio_blk_pci_properties[] = { VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true), DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2), #ifdef CONFIG_VIRTIO_BLK_DATA_PLANE - DEFINE_PROP_BIT("x-data-plane", VirtIOBlkPCI, blk.data_plane, 0, false), + DEFINE_PROP_BIT("x-data-plane", VirtIOBlkPCI, vdev.blk.data_plane, 0, + false), #endif DEFINE_VIRTIO_BLK_FEATURES(VirtIOPCIProxy, host_features), - DEFINE_VIRTIO_BLK_PROPERTIES(VirtIOBlkPCI, blk), + DEFINE_VIRTIO_BLK_PROPERTIES(VirtIOBlkPCI, vdev.blk), DEFINE_PROP_END_OF_LIST(), }; @@ -1416,7 +1417,7 @@ static int virtio_blk_pci_init(VirtIOPCIProxy *vpci_dev) { VirtIOBlkPCI *dev = VIRTIO_BLK_PCI(vpci_dev); DeviceState *vdev = DEVICE(&dev->vdev); - virtio_blk_set_conf(vdev, &(dev->blk)); + qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus)); if (qdev_init(vdev) < 0) { return -1; diff --git a/hw/virtio-pci.h b/hw/virtio-pci.h index a9dbfff..fd6bcb2 100644 --- a/hw/virtio-pci.h +++ b/hw/virtio-pci.h @@ -100,7 +100,6 @@ struct VirtIOPCIProxy { struct VirtIOBlkPCI { VirtIOPCIProxy parent_obj; VirtIOBlock vdev; - VirtIOBlkConf blk; }; void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev);