| Message ID | 1363334109-21922-2-git-send-email-shaveta@freescale.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Kumar Gala |
| Headers | show |
On Mar 15, 2013, at 2:55 AM, Shaveta Leekha wrote: > Signed-off-by: Shaveta Leekha <shaveta@freescale.com> > Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> > Signed-off-by: Andy Fleming <afleming@freescale.com> > Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> > Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> > Signed-off-by: Kumar Gala <galak@kernel.crashing.org> > --- > arch/powerpc/boot/dts/b4860qds.dts | 178 ++++++++++++++++++++++++++++++++++++ > 1 files changed, 178 insertions(+), 0 deletions(-) > create mode 100644 arch/powerpc/boot/dts/b4860qds.dts > > diff --git a/arch/powerpc/boot/dts/b4860qds.dts b/arch/powerpc/boot/dts/b4860qds.dts > new file mode 100644 > index 0000000..ae6ac05 > --- /dev/null > +++ b/arch/powerpc/boot/dts/b4860qds.dts > @@ -0,0 +1,178 @@ > +/* > + * B4860DS Device Tree Source > + * > + * Copyright 2012 Freescale Semiconductor Inc. > + * > + * Redistribution and use in source and binary forms, with or without > + * modification, are permitted provided that the following conditions are met: > + * * Redistributions of source code must retain the above copyright > + * notice, this list of conditions and the following disclaimer. > + * * Redistributions in binary form must reproduce the above copyright > + * notice, this list of conditions and the following disclaimer in the > + * documentation and/or other materials provided with the distribution. > + * * Neither the name of Freescale Semiconductor nor the > + * names of its contributors may be used to endorse or promote products > + * derived from this software without specific prior written permission. > + * > + * > + * ALTERNATIVELY, this software may be distributed under the terms of the > + * GNU General Public License ("GPL") as published by the Free Software > + * Foundation, either version 2 of that License or (at your option) any > + * later version. > + * > + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY > + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED > + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE > + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY > + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES > + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; > + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND > + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS > + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > + */ > + > +/include/ "fsl/b4860si-pre.dtsi" > + > +/ { > + model = "fsl,B4860QDS"; > + compatible = "fsl,B4860QDS"; > + #address-cells = <2>; > + #size-cells = <2>; > + interrupt-parent = <&mpic>; > + > + ifc: localbus@ffe124000 { > + reg = <0xf 0xfe124000 0 0x2000>; > + ranges = <0 0 0xf 0xe8000000 0x08000000 > + 2 0 0xf 0xff800000 0x00010000 > + 3 0 0xf 0xffdf0000 0x00008000>; > + > + nor@0,0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "cfi-flash"; > + reg = <0x0 0x0 0x8000000>; > + bank-width = <2>; > + device-width = <1>; > + }; > + > + nand@2,0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "fsl,ifc-nand"; > + reg = <0x2 0x0 0x10000>; > + > + partition@0 { > + /* This location must not be altered */ > + /* 1MB for u-boot Bootloader Image */ > + reg = <0x0 0x00100000>; > + label = "NAND U-Boot Image"; > + read-only; > + }; > + > + partition@100000 { > + /* 1MB for DTB Image */ > + reg = <0x00100000 0x00100000>; > + label = "NAND DTB Image"; > + }; > + > + partition@200000 { > + /* 10MB for Linux Kernel Image */ > + reg = <0x00200000 0x00A00000>; > + label = "NAND Linux Kernel Image"; > + }; > + > + partition@c00000 { > + /* 500MB for Root file System Image */ > + reg = <0x00c00000 0x1F400000>; > + label = "NAND RFS Image"; > + }; > + }; > + > + board-control@3,0 { > + compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis"; > + reg = <3 0 0x300>; > + }; > + }; > + dscr nodes are missing and should be included > + memory { > + device_type = "memory"; > + }; > + > + soc: soc@ffe000000 { > + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; > + reg = <0xf 0xfe000000 0 0x00001000>; > + spi@110000 { > + flash@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "sst,sst25wf040"; > + reg = <0>; > + spi-max-frequency = <40000000>; /* input clock */ > + }; > + }; > + > + sdhc@114000 { > + status = "disabled"; > + }; > + > + i2c@118000 { > + eeprom@50 { > + compatible = "at24,24c64"; > + reg = <0x50>; > + }; > + eeprom@51 { > + compatible = "at24,24c256"; > + reg = <0x51>; > + }; > + eeprom@53 { > + compatible = "at24,24c256"; > + reg = <0x53>; > + }; > + eeprom@57 { > + compatible = "at24,24c256"; > + reg = <0x57>; > + }; > + rtc@68 { > + compatible = "dallas,ds3232"; > + reg = <0x68>; > + interrupts = <0x1 0x1 0 0>; there is no IRQ for RTC on the board. > + }; > + }; > + > + usb@210000 { > + dr_mode = "host"; > + phy_type = "ulpi"; > + }; > + > + }; > + > + pci0: pcie@ffe200000 { > + reg = <0xf 0xfe200000 0 0x10000>; > + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 > + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; > + pcie@0 { > + ranges = <0x02000000 0 0xe0000000 > + 0x02000000 0 0xe0000000 > + 0 0x20000000 > + > + 0x01000000 0 0x00000000 > + 0x01000000 0 0x00000000 > + 0 0x00010000>; > + }; > + }; > + > + rio: rapidio@ffe0c0000 { > + reg = <0xf 0xfe0c0000 0 0x11000>; > + > + port1 { > + ranges = <0 0 0xc 0x20000000 0 0x10000000>; > + }; > + port2 { > + ranges = <0 0 0xc 0x30000000 0 0x10000000>; > + }; > + }; > + > +}; > + > +/include/ "fsl/b4860si-post.dtsi" > -- > 1.7.6.GIT >
-----Original Message----- From: Kumar Gala [mailto:galak@kernel.crashing.org] Sent: Saturday, March 16, 2013 1:57 AM To: Leekha Shaveta-B20052 Cc: linuxppc-dev@lists.ozlabs.org; Lian Minghuan-B31939; Fleming Andy-AFLEMING; Aggrwal Poonam-B10812; Mehresh Ramneek-B31383 Subject: Re: [PATCH 2/6] powerpc/fsl-booke: Add initial B4860QDS board device tree On Mar 15, 2013, at 2:55 AM, Shaveta Leekha wrote: > Signed-off-by: Shaveta Leekha <shaveta@freescale.com> > Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> > Signed-off-by: Andy Fleming <afleming@freescale.com> > Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> > Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> > Signed-off-by: Kumar Gala <galak@kernel.crashing.org> > --- > arch/powerpc/boot/dts/b4860qds.dts | 178 > ++++++++++++++++++++++++++++++++++++ > 1 files changed, 178 insertions(+), 0 deletions(-) create mode 100644 > arch/powerpc/boot/dts/b4860qds.dts > > diff --git a/arch/powerpc/boot/dts/b4860qds.dts > b/arch/powerpc/boot/dts/b4860qds.dts > new file mode 100644 > index 0000000..ae6ac05 > --- /dev/null > +++ b/arch/powerpc/boot/dts/b4860qds.dts > @@ -0,0 +1,178 @@ > +/* > + * B4860DS Device Tree Source > + * > + * Copyright 2012 Freescale Semiconductor Inc. > + * > + * Redistribution and use in source and binary forms, with or without > + * modification, are permitted provided that the following conditions are met: > + * * Redistributions of source code must retain the above copyright > + * notice, this list of conditions and the following disclaimer. > + * * Redistributions in binary form must reproduce the above copyright > + * notice, this list of conditions and the following disclaimer in the > + * documentation and/or other materials provided with the distribution. > + * * Neither the name of Freescale Semiconductor nor the > + * names of its contributors may be used to endorse or promote products > + * derived from this software without specific prior written permission. > + * > + * > + * ALTERNATIVELY, this software may be distributed under the terms of > +the > + * GNU General Public License ("GPL") as published by the Free > +Software > + * Foundation, either version 2 of that License or (at your option) > +any > + * later version. > + * > + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND > +ANY > + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE > +IMPLIED > + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE > +ARE > + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE > +FOR ANY > + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL > +DAMAGES > + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR > +SERVICES; > + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER > +CAUSED AND > + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, > +OR TORT > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE > +USE OF THIS > + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > + */ > + > +/include/ "fsl/b4860si-pre.dtsi" > + > +/ { > + model = "fsl,B4860QDS"; > + compatible = "fsl,B4860QDS"; > + #address-cells = <2>; > + #size-cells = <2>; > + interrupt-parent = <&mpic>; > + > + ifc: localbus@ffe124000 { > + reg = <0xf 0xfe124000 0 0x2000>; > + ranges = <0 0 0xf 0xe8000000 0x08000000 > + 2 0 0xf 0xff800000 0x00010000 > + 3 0 0xf 0xffdf0000 0x00008000>; > + > + nor@0,0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "cfi-flash"; > + reg = <0x0 0x0 0x8000000>; > + bank-width = <2>; > + device-width = <1>; > + }; > + > + nand@2,0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "fsl,ifc-nand"; > + reg = <0x2 0x0 0x10000>; > + > + partition@0 { > + /* This location must not be altered */ > + /* 1MB for u-boot Bootloader Image */ > + reg = <0x0 0x00100000>; > + label = "NAND U-Boot Image"; > + read-only; > + }; > + > + partition@100000 { > + /* 1MB for DTB Image */ > + reg = <0x00100000 0x00100000>; > + label = "NAND DTB Image"; > + }; > + > + partition@200000 { > + /* 10MB for Linux Kernel Image */ > + reg = <0x00200000 0x00A00000>; > + label = "NAND Linux Kernel Image"; > + }; > + > + partition@c00000 { > + /* 500MB for Root file System Image */ > + reg = <0x00c00000 0x1F400000>; > + label = "NAND RFS Image"; > + }; > + }; > + > + board-control@3,0 { > + compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis"; > + reg = <3 0 0x300>; > + }; > + }; > + dscr nodes are missing and should be included [SL] I don't have much idea about dcsr nodes structure and their respective testing, also couldn't find then in T4 device tree files. I have added initial device trees. Dcsr may be added later as updation. What do you say? > + memory { > + device_type = "memory"; > + }; > + > + soc: soc@ffe000000 { > + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; > + reg = <0xf 0xfe000000 0 0x00001000>; > + spi@110000 { > + flash@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "sst,sst25wf040"; > + reg = <0>; > + spi-max-frequency = <40000000>; /* input clock */ > + }; > + }; > + > + sdhc@114000 { > + status = "disabled"; > + }; > + > + i2c@118000 { > + eeprom@50 { > + compatible = "at24,24c64"; > + reg = <0x50>; > + }; > + eeprom@51 { > + compatible = "at24,24c256"; > + reg = <0x51>; > + }; > + eeprom@53 { > + compatible = "at24,24c256"; > + reg = <0x53>; > + }; > + eeprom@57 { > + compatible = "at24,24c256"; > + reg = <0x57>; > + }; > + rtc@68 { > + compatible = "dallas,ds3232"; > + reg = <0x68>; > + interrupts = <0x1 0x1 0 0>; there is no IRQ for RTC on the board. [SL] will remove it. > + }; > + }; > + > + usb@210000 { > + dr_mode = "host"; > + phy_type = "ulpi"; > + }; > + > + }; > + > + pci0: pcie@ffe200000 { > + reg = <0xf 0xfe200000 0 0x10000>; > + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 > + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; > + pcie@0 { > + ranges = <0x02000000 0 0xe0000000 > + 0x02000000 0 0xe0000000 > + 0 0x20000000 > + > + 0x01000000 0 0x00000000 > + 0x01000000 0 0x00000000 > + 0 0x00010000>; > + }; > + }; > + > + rio: rapidio@ffe0c0000 { > + reg = <0xf 0xfe0c0000 0 0x11000>; > + > + port1 { > + ranges = <0 0 0xc 0x20000000 0 0x10000000>; > + }; > + port2 { > + ranges = <0 0 0xc 0x30000000 0 0x10000000>; > + }; > + }; > + > +}; > + > +/include/ "fsl/b4860si-post.dtsi" > -- > 1.7.6.GIT > Regards, Shaveta
On Mar 18, 2013, at 1:31 AM, Leekha Shaveta-B20052 wrote: > > > -----Original Message----- > From: Kumar Gala [mailto:galak@kernel.crashing.org] > Sent: Saturday, March 16, 2013 1:57 AM > To: Leekha Shaveta-B20052 > Cc: linuxppc-dev@lists.ozlabs.org; Lian Minghuan-B31939; Fleming Andy-AFLEMING; Aggrwal Poonam-B10812; Mehresh Ramneek-B31383 > Subject: Re: [PATCH 2/6] powerpc/fsl-booke: Add initial B4860QDS board device tree > > > On Mar 15, 2013, at 2:55 AM, Shaveta Leekha wrote: > >> Signed-off-by: Shaveta Leekha <shaveta@freescale.com> >> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> >> Signed-off-by: Andy Fleming <afleming@freescale.com> >> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> >> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> >> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> >> --- >> arch/powerpc/boot/dts/b4860qds.dts | 178 >> ++++++++++++++++++++++++++++++++++++ >> 1 files changed, 178 insertions(+), 0 deletions(-) create mode 100644 >> arch/powerpc/boot/dts/b4860qds.dts >> >> diff --git a/arch/powerpc/boot/dts/b4860qds.dts >> b/arch/powerpc/boot/dts/b4860qds.dts >> new file mode 100644 >> index 0000000..ae6ac05 >> --- /dev/null >> +++ b/arch/powerpc/boot/dts/b4860qds.dts >> @@ -0,0 +1,178 @@ >> +/* >> + * B4860DS Device Tree Source >> + * >> + * Copyright 2012 Freescale Semiconductor Inc. >> + * >> + * Redistribution and use in source and binary forms, with or without >> + * modification, are permitted provided that the following conditions are met: >> + * * Redistributions of source code must retain the above copyright >> + * notice, this list of conditions and the following disclaimer. >> + * * Redistributions in binary form must reproduce the above copyright >> + * notice, this list of conditions and the following disclaimer in the >> + * documentation and/or other materials provided with the distribution. >> + * * Neither the name of Freescale Semiconductor nor the >> + * names of its contributors may be used to endorse or promote products >> + * derived from this software without specific prior written permission. >> + * >> + * >> + * ALTERNATIVELY, this software may be distributed under the terms of >> +the >> + * GNU General Public License ("GPL") as published by the Free >> +Software >> + * Foundation, either version 2 of that License or (at your option) >> +any >> + * later version. >> + * >> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND >> +ANY >> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE >> +IMPLIED >> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE >> +ARE >> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE >> +FOR ANY >> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL >> +DAMAGES >> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR >> +SERVICES; >> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER >> +CAUSED AND >> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, >> +OR TORT >> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE >> +USE OF THIS >> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. >> + */ >> + >> +/include/ "fsl/b4860si-pre.dtsi" >> + >> +/ { >> + model = "fsl,B4860QDS"; >> + compatible = "fsl,B4860QDS"; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + interrupt-parent = <&mpic>; >> + >> + ifc: localbus@ffe124000 { >> + reg = <0xf 0xfe124000 0 0x2000>; >> + ranges = <0 0 0xf 0xe8000000 0x08000000 >> + 2 0 0xf 0xff800000 0x00010000 >> + 3 0 0xf 0xffdf0000 0x00008000>; >> + >> + nor@0,0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "cfi-flash"; >> + reg = <0x0 0x0 0x8000000>; >> + bank-width = <2>; >> + device-width = <1>; >> + }; >> + >> + nand@2,0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "fsl,ifc-nand"; >> + reg = <0x2 0x0 0x10000>; >> + >> + partition@0 { >> + /* This location must not be altered */ >> + /* 1MB for u-boot Bootloader Image */ >> + reg = <0x0 0x00100000>; >> + label = "NAND U-Boot Image"; >> + read-only; >> + }; >> + >> + partition@100000 { >> + /* 1MB for DTB Image */ >> + reg = <0x00100000 0x00100000>; >> + label = "NAND DTB Image"; >> + }; >> + >> + partition@200000 { >> + /* 10MB for Linux Kernel Image */ >> + reg = <0x00200000 0x00A00000>; >> + label = "NAND Linux Kernel Image"; >> + }; >> + >> + partition@c00000 { >> + /* 500MB for Root file System Image */ >> + reg = <0x00c00000 0x1F400000>; >> + label = "NAND RFS Image"; >> + }; >> + }; >> + >> + board-control@3,0 { >> + compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis"; >> + reg = <3 0 0x300>; >> + }; >> + }; >> + > > dscr nodes are missing and should be included > [SL] I don't have much idea about dcsr nodes structure and their respective testing, also couldn't find then in T4 device tree files. I have added initial device trees. Dcsr may be added later as updation. What do you say? I'll add them to T4, but if you look at the internal FSL SDK tree you will see they've been added for T4 & B4. > > >> + memory { >> + device_type = "memory"; >> + }; >> + >> + soc: soc@ffe000000 { >> + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; >> + reg = <0xf 0xfe000000 0 0x00001000>; >> + spi@110000 { >> + flash@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "sst,sst25wf040"; >> + reg = <0>; >> + spi-max-frequency = <40000000>; /* input clock */ >> + }; >> + }; >> + >> + sdhc@114000 { >> + status = "disabled"; >> + }; >> + >> + i2c@118000 { >> + eeprom@50 { >> + compatible = "at24,24c64"; >> + reg = <0x50>; >> + }; >> + eeprom@51 { >> + compatible = "at24,24c256"; >> + reg = <0x51>; >> + }; >> + eeprom@53 { >> + compatible = "at24,24c256"; >> + reg = <0x53>; >> + }; >> + eeprom@57 { >> + compatible = "at24,24c256"; >> + reg = <0x57>; >> + }; >> + rtc@68 { >> + compatible = "dallas,ds3232"; >> + reg = <0x68>; >> + interrupts = <0x1 0x1 0 0>; > > there is no IRQ for RTC on the board. > [SL] will remove it. > >> + }; >> + }; >> + >> + usb@210000 { >> + dr_mode = "host"; >> + phy_type = "ulpi"; >> + }; >> + >> + }; >> + >> + pci0: pcie@ffe200000 { >> + reg = <0xf 0xfe200000 0 0x10000>; >> + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 >> + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; >> + pcie@0 { >> + ranges = <0x02000000 0 0xe0000000 >> + 0x02000000 0 0xe0000000 >> + 0 0x20000000 >> + >> + 0x01000000 0 0x00000000 >> + 0x01000000 0 0x00000000 >> + 0 0x00010000>; >> + }; >> + }; >> + >> + rio: rapidio@ffe0c0000 { >> + reg = <0xf 0xfe0c0000 0 0x11000>; >> + >> + port1 { >> + ranges = <0 0 0xc 0x20000000 0 0x10000000>; >> + }; >> + port2 { >> + ranges = <0 0 0xc 0x30000000 0 0x10000000>; >> + }; >> + }; >> + >> +}; >> + >> +/include/ "fsl/b4860si-post.dtsi" >> -- >> 1.7.6.GIT >> > > > Regards, > Shaveta > >
-----Original Message----- From: Kumar Gala [mailto:galak@kernel.crashing.org] Sent: Monday, March 18, 2013 8:33 PM To: Leekha Shaveta-B20052 Cc: linuxppc-dev@lists.ozlabs.org; Lian Minghuan-B31939; Fleming Andy-AFLEMING; Aggrwal Poonam-B10812; Mehresh Ramneek-B31383 Subject: Re: [PATCH 2/6] powerpc/fsl-booke: Add initial B4860QDS board device tree On Mar 18, 2013, at 1:31 AM, Leekha Shaveta-B20052 wrote: > > > -----Original Message----- > From: Kumar Gala [mailto:galak@kernel.crashing.org] > Sent: Saturday, March 16, 2013 1:57 AM > To: Leekha Shaveta-B20052 > Cc: linuxppc-dev@lists.ozlabs.org; Lian Minghuan-B31939; Fleming > Andy-AFLEMING; Aggrwal Poonam-B10812; Mehresh Ramneek-B31383 > Subject: Re: [PATCH 2/6] powerpc/fsl-booke: Add initial B4860QDS board > device tree > > > On Mar 15, 2013, at 2:55 AM, Shaveta Leekha wrote: > >> Signed-off-by: Shaveta Leekha <shaveta@freescale.com> >> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> >> Signed-off-by: Andy Fleming <afleming@freescale.com> >> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> >> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> >> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> >> --- >> arch/powerpc/boot/dts/b4860qds.dts | 178 >> ++++++++++++++++++++++++++++++++++++ >> 1 files changed, 178 insertions(+), 0 deletions(-) create mode 100644 >> arch/powerpc/boot/dts/b4860qds.dts >> >> diff --git a/arch/powerpc/boot/dts/b4860qds.dts >> b/arch/powerpc/boot/dts/b4860qds.dts >> new file mode 100644 >> index 0000000..ae6ac05 >> --- /dev/null >> +++ b/arch/powerpc/boot/dts/b4860qds.dts >> @@ -0,0 +1,178 @@ >> +/* >> + * B4860DS Device Tree Source >> + * >> + * Copyright 2012 Freescale Semiconductor Inc. >> + * >> + * Redistribution and use in source and binary forms, with or >> +without >> + * modification, are permitted provided that the following conditions are met: >> + * * Redistributions of source code must retain the above copyright >> + * notice, this list of conditions and the following disclaimer. >> + * * Redistributions in binary form must reproduce the above copyright >> + * notice, this list of conditions and the following disclaimer in the >> + * documentation and/or other materials provided with the distribution. >> + * * Neither the name of Freescale Semiconductor nor the >> + * names of its contributors may be used to endorse or promote products >> + * derived from this software without specific prior written permission. >> + * >> + * >> + * ALTERNATIVELY, this software may be distributed under the terms >> +of the >> + * GNU General Public License ("GPL") as published by the Free >> +Software >> + * Foundation, either version 2 of that License or (at your option) >> +any >> + * later version. >> + * >> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' >> +AND ANY >> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE >> +IMPLIED >> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR >> +PURPOSE ARE >> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE >> +FOR ANY >> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR >> +CONSEQUENTIAL DAMAGES >> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS >> +OR SERVICES; >> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER >> +CAUSED AND >> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT >> +LIABILITY, OR TORT >> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE >> +USE OF THIS >> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. >> + */ >> + >> +/include/ "fsl/b4860si-pre.dtsi" >> + >> +/ { >> + model = "fsl,B4860QDS"; >> + compatible = "fsl,B4860QDS"; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + interrupt-parent = <&mpic>; >> + >> + ifc: localbus@ffe124000 { >> + reg = <0xf 0xfe124000 0 0x2000>; >> + ranges = <0 0 0xf 0xe8000000 0x08000000 >> + 2 0 0xf 0xff800000 0x00010000 >> + 3 0 0xf 0xffdf0000 0x00008000>; >> + >> + nor@0,0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "cfi-flash"; >> + reg = <0x0 0x0 0x8000000>; >> + bank-width = <2>; >> + device-width = <1>; >> + }; >> + >> + nand@2,0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "fsl,ifc-nand"; >> + reg = <0x2 0x0 0x10000>; >> + >> + partition@0 { >> + /* This location must not be altered */ >> + /* 1MB for u-boot Bootloader Image */ >> + reg = <0x0 0x00100000>; >> + label = "NAND U-Boot Image"; >> + read-only; >> + }; >> + >> + partition@100000 { >> + /* 1MB for DTB Image */ >> + reg = <0x00100000 0x00100000>; >> + label = "NAND DTB Image"; >> + }; >> + >> + partition@200000 { >> + /* 10MB for Linux Kernel Image */ >> + reg = <0x00200000 0x00A00000>; >> + label = "NAND Linux Kernel Image"; >> + }; >> + >> + partition@c00000 { >> + /* 500MB for Root file System Image */ >> + reg = <0x00c00000 0x1F400000>; >> + label = "NAND RFS Image"; >> + }; >> + }; >> + >> + board-control@3,0 { >> + compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis"; >> + reg = <3 0 0x300>; >> + }; >> + }; >> + > > dscr nodes are missing and should be included [SL] I don't have much > idea about dcsr nodes structure and their respective testing, also couldn't find then in T4 device tree files. I have added initial device trees. Dcsr may be added later as updation. What do you say? I'll add them to T4, but if you look at the internal FSL SDK tree you will see they've been added for T4 & B4. [SL] Ok, will add them. > > >> + memory { >> + device_type = "memory"; >> + }; >> + >> + soc: soc@ffe000000 { >> + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; >> + reg = <0xf 0xfe000000 0 0x00001000>; >> + spi@110000 { >> + flash@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "sst,sst25wf040"; >> + reg = <0>; >> + spi-max-frequency = <40000000>; /* input clock */ >> + }; >> + }; >> + >> + sdhc@114000 { >> + status = "disabled"; >> + }; >> + >> + i2c@118000 { >> + eeprom@50 { >> + compatible = "at24,24c64"; >> + reg = <0x50>; >> + }; >> + eeprom@51 { >> + compatible = "at24,24c256"; >> + reg = <0x51>; >> + }; >> + eeprom@53 { >> + compatible = "at24,24c256"; >> + reg = <0x53>; >> + }; >> + eeprom@57 { >> + compatible = "at24,24c256"; >> + reg = <0x57>; >> + }; >> + rtc@68 { >> + compatible = "dallas,ds3232"; >> + reg = <0x68>; >> + interrupts = <0x1 0x1 0 0>; > > there is no IRQ for RTC on the board. > [SL] will remove it. > >> + }; >> + }; >> + >> + usb@210000 { >> + dr_mode = "host"; >> + phy_type = "ulpi"; >> + }; >> + >> + }; >> + >> + pci0: pcie@ffe200000 { >> + reg = <0xf 0xfe200000 0 0x10000>; >> + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 >> + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; >> + pcie@0 { >> + ranges = <0x02000000 0 0xe0000000 >> + 0x02000000 0 0xe0000000 >> + 0 0x20000000 >> + >> + 0x01000000 0 0x00000000 >> + 0x01000000 0 0x00000000 >> + 0 0x00010000>; >> + }; >> + }; >> + >> + rio: rapidio@ffe0c0000 { >> + reg = <0xf 0xfe0c0000 0 0x11000>; >> + >> + port1 { >> + ranges = <0 0 0xc 0x20000000 0 0x10000000>; >> + }; >> + port2 { >> + ranges = <0 0 0xc 0x30000000 0 0x10000000>; >> + }; >> + }; >> + >> +}; >> + >> +/include/ "fsl/b4860si-post.dtsi" >> -- >> 1.7.6.GIT >> > > > Regards, > Shaveta > >
-----Original Message----- From: Leekha Shaveta-B20052 Sent: Tuesday, March 19, 2013 11:41 AM To: 'Kumar Gala' Cc: linuxppc-dev@lists.ozlabs.org; Lian Minghuan-B31939; Fleming Andy-AFLEMING; Aggrwal Poonam-B10812; Mehresh Ramneek-B31383 Subject: RE: [PATCH 2/6] powerpc/fsl-booke: Add initial B4860QDS board device tree -----Original Message----- From: Kumar Gala [mailto:galak@kernel.crashing.org] Sent: Monday, March 18, 2013 8:33 PM To: Leekha Shaveta-B20052 Cc: linuxppc-dev@lists.ozlabs.org; Lian Minghuan-B31939; Fleming Andy-AFLEMING; Aggrwal Poonam-B10812; Mehresh Ramneek-B31383 Subject: Re: [PATCH 2/6] powerpc/fsl-booke: Add initial B4860QDS board device tree On Mar 18, 2013, at 1:31 AM, Leekha Shaveta-B20052 wrote: > > > -----Original Message----- > From: Kumar Gala [mailto:galak@kernel.crashing.org] > Sent: Saturday, March 16, 2013 1:57 AM > To: Leekha Shaveta-B20052 > Cc: linuxppc-dev@lists.ozlabs.org; Lian Minghuan-B31939; Fleming > Andy-AFLEMING; Aggrwal Poonam-B10812; Mehresh Ramneek-B31383 > Subject: Re: [PATCH 2/6] powerpc/fsl-booke: Add initial B4860QDS board > device tree > > > On Mar 15, 2013, at 2:55 AM, Shaveta Leekha wrote: > >> Signed-off-by: Shaveta Leekha <shaveta@freescale.com> >> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> >> Signed-off-by: Andy Fleming <afleming@freescale.com> >> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> >> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> >> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> >> --- >> arch/powerpc/boot/dts/b4860qds.dts | 178 >> ++++++++++++++++++++++++++++++++++++ >> 1 files changed, 178 insertions(+), 0 deletions(-) create mode 100644 >> arch/powerpc/boot/dts/b4860qds.dts >> >> diff --git a/arch/powerpc/boot/dts/b4860qds.dts >> b/arch/powerpc/boot/dts/b4860qds.dts >> new file mode 100644 >> index 0000000..ae6ac05 >> --- /dev/null >> +++ b/arch/powerpc/boot/dts/b4860qds.dts >> @@ -0,0 +1,178 @@ >> +/* >> + * B4860DS Device Tree Source >> + * >> + * Copyright 2012 Freescale Semiconductor Inc. >> + * >> + * Redistribution and use in source and binary forms, with or >> +without >> + * modification, are permitted provided that the following conditions are met: >> + * * Redistributions of source code must retain the above copyright >> + * notice, this list of conditions and the following disclaimer. >> + * * Redistributions in binary form must reproduce the above copyright >> + * notice, this list of conditions and the following disclaimer in the >> + * documentation and/or other materials provided with the distribution. >> + * * Neither the name of Freescale Semiconductor nor the >> + * names of its contributors may be used to endorse or promote products >> + * derived from this software without specific prior written permission. >> + * >> + * >> + * ALTERNATIVELY, this software may be distributed under the terms >> +of the >> + * GNU General Public License ("GPL") as published by the Free >> +Software >> + * Foundation, either version 2 of that License or (at your option) >> +any >> + * later version. >> + * >> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' >> +AND ANY >> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE >> +IMPLIED >> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR >> +PURPOSE ARE >> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE >> +FOR ANY >> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR >> +CONSEQUENTIAL DAMAGES >> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS >> +OR SERVICES; >> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER >> +CAUSED AND >> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT >> +LIABILITY, OR TORT >> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE >> +USE OF THIS >> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. >> + */ >> + >> +/include/ "fsl/b4860si-pre.dtsi" >> + >> +/ { >> + model = "fsl,B4860QDS"; >> + compatible = "fsl,B4860QDS"; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + interrupt-parent = <&mpic>; >> + >> + ifc: localbus@ffe124000 { >> + reg = <0xf 0xfe124000 0 0x2000>; >> + ranges = <0 0 0xf 0xe8000000 0x08000000 >> + 2 0 0xf 0xff800000 0x00010000 >> + 3 0 0xf 0xffdf0000 0x00008000>; >> + >> + nor@0,0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "cfi-flash"; >> + reg = <0x0 0x0 0x8000000>; >> + bank-width = <2>; >> + device-width = <1>; >> + }; >> + >> + nand@2,0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "fsl,ifc-nand"; >> + reg = <0x2 0x0 0x10000>; >> + >> + partition@0 { >> + /* This location must not be altered */ >> + /* 1MB for u-boot Bootloader Image */ >> + reg = <0x0 0x00100000>; >> + label = "NAND U-Boot Image"; >> + read-only; >> + }; >> + >> + partition@100000 { >> + /* 1MB for DTB Image */ >> + reg = <0x00100000 0x00100000>; >> + label = "NAND DTB Image"; >> + }; >> + >> + partition@200000 { >> + /* 10MB for Linux Kernel Image */ >> + reg = <0x00200000 0x00A00000>; >> + label = "NAND Linux Kernel Image"; >> + }; >> + >> + partition@c00000 { >> + /* 500MB for Root file System Image */ >> + reg = <0x00c00000 0x1F400000>; >> + label = "NAND RFS Image"; >> + }; >> + }; >> + >> + board-control@3,0 { >> + compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis"; >> + reg = <3 0 0x300>; >> + }; >> + }; >> + > > dscr nodes are missing and should be included [SL] I don't have much > idea about dcsr nodes structure and their respective testing, also couldn't find then in T4 device tree files. I have added initial device trees. Dcsr may be added later as updation. What do you say? I'll add them to T4, but if you look at the internal FSL SDK tree you will see they've been added for T4 & B4. [SL] Ok, will add them. Can you please point me to the patch or codebase where dcsr nodes are added in B4? BR, Shaveta > > >> + memory { >> + device_type = "memory"; >> + }; >> + >> + soc: soc@ffe000000 { >> + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; >> + reg = <0xf 0xfe000000 0 0x00001000>; >> + spi@110000 { >> + flash@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "sst,sst25wf040"; >> + reg = <0>; >> + spi-max-frequency = <40000000>; /* input clock */ >> + }; >> + }; >> + >> + sdhc@114000 { >> + status = "disabled"; >> + }; >> + >> + i2c@118000 { >> + eeprom@50 { >> + compatible = "at24,24c64"; >> + reg = <0x50>; >> + }; >> + eeprom@51 { >> + compatible = "at24,24c256"; >> + reg = <0x51>; >> + }; >> + eeprom@53 { >> + compatible = "at24,24c256"; >> + reg = <0x53>; >> + }; >> + eeprom@57 { >> + compatible = "at24,24c256"; >> + reg = <0x57>; >> + }; >> + rtc@68 { >> + compatible = "dallas,ds3232"; >> + reg = <0x68>; >> + interrupts = <0x1 0x1 0 0>; > > there is no IRQ for RTC on the board. > [SL] will remove it. > >> + }; >> + }; >> + >> + usb@210000 { >> + dr_mode = "host"; >> + phy_type = "ulpi"; >> + }; >> + >> + }; >> + >> + pci0: pcie@ffe200000 { >> + reg = <0xf 0xfe200000 0 0x10000>; >> + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 >> + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; >> + pcie@0 { >> + ranges = <0x02000000 0 0xe0000000 >> + 0x02000000 0 0xe0000000 >> + 0 0x20000000 >> + >> + 0x01000000 0 0x00000000 >> + 0x01000000 0 0x00000000 >> + 0 0x00010000>; >> + }; >> + }; >> + >> + rio: rapidio@ffe0c0000 { >> + reg = <0xf 0xfe0c0000 0 0x11000>; >> + >> + port1 { >> + ranges = <0 0 0xc 0x20000000 0 0x10000000>; >> + }; >> + port2 { >> + ranges = <0 0 0xc 0x30000000 0 0x10000000>; >> + }; >> + }; >> + >> +}; >> + >> +/include/ "fsl/b4860si-post.dtsi" >> -- >> 1.7.6.GIT >> > > > Regards, > Shaveta > >
diff --git a/arch/powerpc/boot/dts/b4860qds.dts b/arch/powerpc/boot/dts/b4860qds.dts new file mode 100644 index 0000000..ae6ac05 --- /dev/null +++ b/arch/powerpc/boot/dts/b4860qds.dts @@ -0,0 +1,178 @@ +/* + * B4860DS Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/b4860si-pre.dtsi" + +/ { + model = "fsl,B4860QDS"; + compatible = "fsl,B4860QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 10MB for Linux Kernel Image */ + reg = <0x00200000 0x00A00000>; + label = "NAND Linux Kernel Image"; + }; + + partition@c00000 { + /* 500MB for Root file System Image */ + reg = <0x00c00000 0x1F400000>; + label = "NAND RFS Image"; + }; + }; + + board-control@3,0 { + compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis"; + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + }; + + sdhc@114000 { + status = "disabled"; + }; + + i2c@118000 { + eeprom@50 { + compatible = "at24,24c64"; + reg = <0x50>; + }; + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@53 { + compatible = "at24,24c256"; + reg = <0x53>; + }; + eeprom@57 { + compatible = "at24,24c256"; + reg = <0x57>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + usb@210000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + +}; + +/include/ "fsl/b4860si-post.dtsi"