diff mbox

[U-Boot,v4] mxs: timrot: Add support to i.MX23

Message ID 1362020407-23000-1-git-send-email-f.koliqi@gmail.com
State Changes Requested
Delegated to: Stefano Babic
Headers show

Commit Message

Fadil Berisha Feb. 28, 2013, 3 a.m. UTC 
From: Fadil Berisha <f.koliqi@gmail.com>

This patch add timer support to i.MX23 and complete bit fields and values
on regs-timrot.h.
Testet on imx23-olinuxino board.

Signed-off-by: Fadil Berisha <f.koliqi@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
---
v2 - Updated the struct mxs_timrot_regs so the mapping works for all registers
v3 - Revert macro MX28_INCREMENTER_HZ, MX28_HW_DIGCTL_MICROSECONDS and fix whitespaces
v4 - Fixed comment and style corrections
 arch/arm/cpu/arm926ejs/mxs/timer.c          |   23 +++++-
 arch/arm/include/asm/arch-mxs/regs-timrot.h |  101 +++++++++++++++++++++++++++
 2 files changed, 122 insertions(+), 2 deletions(-)

Comments

Otavio Salvador Feb. 28, 2013, 4:26 p.m. UTC | #1 
On Thu, Feb 28, 2013 at 12:00 AM, Fadil Berisha <f.koliqi@gmail.com> wrote:
> From: Fadil Berisha <f.koliqi@gmail.com>
>
> This patch add timer support to i.MX23 and complete bit fields and values
> on regs-timrot.h.
> Testet on imx23-olinuxino board.
>
> Signed-off-by: Fadil Berisha <f.koliqi@gmail.com>
> Acked-by: Marek Vasut <marex@denx.de>

Acked-by: Otavio Salvador <otavio@ossystems.com.br>
diff mbox

Patch

diff --git a/arch/arm/cpu/arm926ejs/mxs/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c
index 4ed75e6..fc0a2af 100644
--- a/arch/arm/cpu/arm926ejs/mxs/timer.c
+++ b/arch/arm/cpu/arm926ejs/mxs/timer.c
@@ -32,7 +32,11 @@ 
 #include <asm/arch/sys_proto.h>
 
 /* Maximum fixed count */
-#define TIMER_LOAD_VAL	0xffffffff
+#if defined(CONFIG_MX23)
+#define TIMER_LOAD_VAL 0xffff
+#elif defined(CONFIG_MX28)
+#define TIMER_LOAD_VAL 0xffffffff
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -69,7 +73,11 @@  int timer_init(void)
 	mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg);
 
 	/* Set fixed_count to 0 */
+#if defined(CONFIG_MX23)
+	writel(0, &timrot_regs->hw_timrot_timcount0);
+#elif defined(CONFIG_MX28)
 	writel(0, &timrot_regs->hw_timrot_fixed_count0);
+#endif
 
 	/* Set UPDATE bit and 1Khz frequency */
 	writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD |
@@ -77,7 +85,11 @@  int timer_init(void)
 		&timrot_regs->hw_timrot_timctrl0);
 
 	/* Set fixed_count to maximal value */
+#if defined(CONFIG_MX23)
+	writel(TIMER_LOAD_VAL - 1, &timrot_regs->hw_timrot_timcount0);
+#elif defined(CONFIG_MX28)
 	writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0);
+#endif
 
 	return 0;
 }
@@ -86,9 +98,16 @@  unsigned long long get_ticks(void)
 {
 	struct mxs_timrot_regs *timrot_regs =
 		(struct mxs_timrot_regs *)MXS_TIMROT_BASE;
+	uint32_t now;
 
 	/* Current tick value */
-	uint32_t now = readl(&timrot_regs->hw_timrot_running_count0);
+#if defined(CONFIG_MX23)
+	/* Upper bits are the valid ones. */
+	now = readl(&timrot_regs->hw_timrot_timcount0) >>
+		TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET;
+#elif defined(CONFIG_MX28)
+	now = readl(&timrot_regs->hw_timrot_running_count0);
+#endif
 
 	if (lastdec >= now) {
 		/*
diff --git a/arch/arm/include/asm/arch-mxs/regs-timrot.h b/arch/arm/include/asm/arch-mxs/regs-timrot.h
index 529a3bc..f8537f1 100644
--- a/arch/arm/include/asm/arch-mxs/regs-timrot.h
+++ b/arch/arm/include/asm/arch-mxs/regs-timrot.h
@@ -31,6 +31,16 @@ 
 struct mxs_timrot_regs {
 	mxs_reg_32(hw_timrot_rotctrl)
 	mxs_reg_32(hw_timrot_rotcount)
+#if defined(CONFIG_MX23)
+	mxs_reg_32(hw_timrot_timctrl0)
+	mxs_reg_32(hw_timrot_timcount0)
+	mxs_reg_32(hw_timrot_timctrl1)
+	mxs_reg_32(hw_timrot_timcount1)
+	mxs_reg_32(hw_timrot_timctrl2)
+	mxs_reg_32(hw_timrot_timcount2)
+	mxs_reg_32(hw_timrot_timctrl3)
+	mxs_reg_32(hw_timrot_timcount3)
+#elif defined(CONFIG_MX28)
 	mxs_reg_32(hw_timrot_timctrl0)
 	mxs_reg_32(hw_timrot_running_count0)
 	mxs_reg_32(hw_timrot_fixed_count0)
@@ -47,6 +57,7 @@  struct mxs_timrot_regs {
 	mxs_reg_32(hw_timrot_running_count3)
 	mxs_reg_32(hw_timrot_fixed_count3)
 	mxs_reg_32(hw_timrot_match_count3)
+#endif
 	mxs_reg_32(hw_timrot_version)
 };
 #endif
@@ -71,7 +82,11 @@  struct mxs_timrot_regs {
 #define	TIMROT_ROTCTRL_OVERSAMPLE_1X			(0x3 << 10)
 #define	TIMROT_ROTCTRL_POLARITY_B			(1 << 9)
 #define	TIMROT_ROTCTRL_POLARITY_A			(1 << 8)
+#if defined(CONFIG_MX23)
+#define	TIMROT_ROTCTRL_SELECT_B_MASK			(0x7 << 4)
+#elif defined(CONFIG_MX28)
 #define	TIMROT_ROTCTRL_SELECT_B_MASK			(0xf << 4)
+#endif
 #define	TIMROT_ROTCTRL_SELECT_B_OFFSET			4
 #define	TIMROT_ROTCTRL_SELECT_B_NEVER_TICK		(0x0 << 4)
 #define	TIMROT_ROTCTRL_SELECT_B_PWM0			(0x1 << 4)
@@ -79,12 +94,21 @@  struct mxs_timrot_regs {
 #define	TIMROT_ROTCTRL_SELECT_B_PWM2			(0x3 << 4)
 #define	TIMROT_ROTCTRL_SELECT_B_PWM3			(0x4 << 4)
 #define	TIMROT_ROTCTRL_SELECT_B_PWM4			(0x5 << 4)
+#if defined(CONFIG_MX23)
+#define	TIMROT_ROTCTRL_SELECT_B_ROTARYA		(0x6 << 4)
+#define	TIMROT_ROTCTRL_SELECT_B_ROTARYB		(0x7 << 4)
+#elif defined(CONFIG_MX28)
 #define	TIMROT_ROTCTRL_SELECT_B_PWM5			(0x6 << 4)
 #define	TIMROT_ROTCTRL_SELECT_B_PWM6			(0x7 << 4)
 #define	TIMROT_ROTCTRL_SELECT_B_PWM7			(0x8 << 4)
 #define	TIMROT_ROTCTRL_SELECT_B_ROTARYA			(0x9 << 4)
 #define	TIMROT_ROTCTRL_SELECT_B_ROTARYB			(0xa << 4)
+#endif
+#if defined(CONFIG_MX23)
+#define	TIMROT_ROTCTRL_SELECT_A_MASK			0x7
+#elif defined(CONFIG_MX28)
 #define	TIMROT_ROTCTRL_SELECT_A_MASK			0xf
+#endif
 #define	TIMROT_ROTCTRL_SELECT_A_OFFSET			0
 #define	TIMROT_ROTCTRL_SELECT_A_NEVER_TICK		0x0
 #define	TIMROT_ROTCTRL_SELECT_A_PWM0			0x1
@@ -92,18 +116,25 @@  struct mxs_timrot_regs {
 #define	TIMROT_ROTCTRL_SELECT_A_PWM2			0x3
 #define	TIMROT_ROTCTRL_SELECT_A_PWM3			0x4
 #define	TIMROT_ROTCTRL_SELECT_A_PWM4			0x5
+#if defined(CONFIG_MX23)
+#define	TIMROT_ROTCTRL_SELECT_A_ROTARYA		0x6
+#define	TIMROT_ROTCTRL_SELECT_A_ROTARYB		0x7
+#elif defined(CONFIG_MX28)
 #define	TIMROT_ROTCTRL_SELECT_A_PWM5			0x6
 #define	TIMROT_ROTCTRL_SELECT_A_PWM6			0x7
 #define	TIMROT_ROTCTRL_SELECT_A_PWM7			0x8
 #define	TIMROT_ROTCTRL_SELECT_A_ROTARYA			0x9
 #define	TIMROT_ROTCTRL_SELECT_A_ROTARYB			0xa
+#endif
 
 #define	TIMROT_ROTCOUNT_UPDOWN_MASK			0xffff
 #define	TIMROT_ROTCOUNT_UPDOWN_OFFSET			0
 
 #define	TIMROT_TIMCTRLn_IRQ				(1 << 15)
 #define	TIMROT_TIMCTRLn_IRQ_EN				(1 << 14)
+#if defined(CONFIG_MX28)
 #define	TIMROT_TIMCTRLn_MATCH_MODE			(1 << 11)
+#endif
 #define	TIMROT_TIMCTRLn_POLARITY			(1 << 8)
 #define	TIMROT_TIMCTRLn_UPDATE				(1 << 7)
 #define	TIMROT_TIMCTRLn_RELOAD				(1 << 6)
@@ -121,6 +152,15 @@  struct mxs_timrot_regs {
 #define	TIMROT_TIMCTRLn_SELECT_PWM2			0x3
 #define	TIMROT_TIMCTRLn_SELECT_PWM3			0x4
 #define	TIMROT_TIMCTRLn_SELECT_PWM4			0x5
+#if defined(CONFIG_MX23)
+#define	TIMROT_TIMCTRLn_SELECT_ROTARYA		0x6
+#define	TIMROT_TIMCTRLn_SELECT_ROTARYB		0x7
+#define	TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL		0x8
+#define	TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL		0x9
+#define	TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL		0xa
+#define	TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL		0xb
+#define	TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS		0xc
+#elif defined(CONFIG_MX28)
 #define	TIMROT_TIMCTRLn_SELECT_PWM5			0x6
 #define	TIMROT_TIMCTRLn_SELECT_PWM6			0x7
 #define	TIMROT_TIMCTRLn_SELECT_PWM7			0x8
@@ -131,15 +171,28 @@  struct mxs_timrot_regs {
 #define	TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL		0xd
 #define	TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL		0xe
 #define	TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS		0xf
+#endif
 
+#if defined(CONFIG_MX23)
+#define	TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK	(0xffff << 16)
+#define	TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET	16
+#elif defined(CONFIG_MX28)
 #define	TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK	0xffffffff
 #define	TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET	0
+#endif
 
+#if defined(CONFIG_MX23)
+#define	TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK		0xffff
+#define	TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET		0
+#elif defined(CONFIG_MX28)
 #define	TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK		0xffffffff
 #define	TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET		0
+#endif
 
+#if defined(CONFIG_MX28)
 #define	TIMROT_MATCH_COUNTn_MATCH_COUNT_MASK		0xffffffff
 #define	TIMROT_MATCH_COUNTn_MATCH_COUNT_OFFSET		0
+#endif
 
 #define	TIMROT_TIMCTRL3_TEST_SIGNAL_MASK		(0xf << 16)
 #define	TIMROT_TIMCTRL3_TEST_SIGNAL_OFFSET		16
@@ -149,6 +202,15 @@  struct mxs_timrot_regs {
 #define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM2		(0x3 << 16)
 #define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM3		(0x4 << 16)
 #define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM4		(0x5 << 16)
+#if defined(CONFIG_MX23)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA		(0x6 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB		(0x7 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL		(0x8 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL		(0x9 << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL		(0xa << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL		(0xb << 16)
+#define	TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS		(0xc << 16)
+#elif defined(CONFIG_MX28)
 #define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM5		(0x6 << 16)
 #define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM6		(0x7 << 16)
 #define	TIMROT_TIMCTRL3_TEST_SIGNAL_PWM7		(0x8 << 16)
@@ -159,7 +221,46 @@  struct mxs_timrot_regs {
 #define	TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL		(0xd << 16)
 #define	TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL		(0xe << 16)
 #define	TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS		(0xf << 16)
+#endif
+#if defined(CONFIG_MX23)
+#define	TIMROT_TIMCTRL3_IRQ				(1 << 15)
+#define	TIMROT_TIMCTRL3_IRQ_EN				(1 << 14)
+#define	TIMROT_TIMCTRL3_DUTU_VALID			(1 << 10)
+#endif
 #define	TIMROT_TIMCTRL3_DUTY_CYCLE			(1 << 9)
+#if defined(CONFIG_MX23)
+#define	TIMROT_TIMCTRL3_POLARITY_MASK			(0x1 << 8)
+#define	TIMROT_TIMCTRL3_POLARITY_OFFSET		8
+#define	TIMROT_TIMCTRL3_POLARITY_POSITIVE		(0x0 << 8)
+#define	TIMROT_TIMCTRL3_POLARITY_NEGATIVE		(0x1 << 8)
+#define	TIMROT_TIMCTRL3_UPDATE				(1 << 7)
+#define	TIMROT_TIMCTRL3_RELOAD				(1 << 6)
+#define	TIMROT_TIMCTRL3_PRESCALE_MASK			(0x3 << 4)
+#define	TIMROT_TIMCTRL3_PRESCALE_OFFSET		4
+#define	TIMROT_TIMCTRL3_PRESCALE_DIV_BY_1		(0x0 << 4)
+#define	TIMROT_TIMCTRL3_PRESCALE_DIV_BY_2		(0x1 << 4)
+#define	TIMROT_TIMCTRL3_PRESCALE_DIV_BY_4		(0x2 << 4)
+#define	TIMROT_TIMCTRL3_PRESCALE_DIV_BY_8		(0x3 << 4)
+#define	TIMROT_TIMCTRL3_SELECT_MASK			0xf
+#define	TIMROT_TIMCTRL3_SELECT_OFFSET			0
+#define	TIMROT_TIMCTRL3_SELECT_NEVER_TICK		0x0
+#define	TIMROT_TIMCTRL3_SELECT_PWM0			0x1
+#define	TIMROT_TIMCTRL3_SELECT_PWM1			0x2
+#define	TIMROT_TIMCTRL3_SELECT_PWM2			0x3
+#define	TIMROT_TIMCTRL3_SELECT_PWM3			0x4
+#define	TIMROT_TIMCTRL3_SELECT_PWM4			0x5
+#define	TIMROT_TIMCTRL3_SELECT_ROTARYA		0x6
+#define	TIMROT_TIMCTRL3_SELECT_ROTARYB		0x7
+#define	TIMROT_TIMCTRL3_SELECT_32KHZ_XTAL		0x8
+#define	TIMROT_TIMCTRL3_SELECT_8KHZ_XTAL		0x9
+#define	TIMROT_TIMCTRL3_SELECT_4KHZ_XTAL		0xa
+#define	TIMROT_TIMCTRL3_SELECT_1KHZ_XTAL		0xb
+#define	TIMROT_TIMCTRL3_SELECT_TICK_ALWAYS		0xc
+#define	TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_MASK	(0xffff << 16)
+#define	TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_OFFSET	16
+#define	TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_MASK	0xffff
+#define	TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_OFFSET	0
+#endif
 
 #define	TIMROT_VERSION_MAJOR_MASK			(0xff << 24)
 #define	TIMROT_VERSION_MAJOR_OFFSET			24