| Message ID | 1361187031-3679-4-git-send-email-wni@nvidia.com |
|---|---|
| State | RFC, archived |
| Headers | show |
On Mon, Feb 18, 2013 at 07:30:25PM +0800, Wei Ni wrote: > Add support to handle irq. When the temperature touch the limit value, the > driver can handle the interrupt. > > Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> > Signed-off-by: Wei Ni <wni@nvidia.com> > --- > drivers/hwmon/lm90.c | 38 ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > > diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c > index caf01b0..80311ef 100644 > --- a/drivers/hwmon/lm90.c > +++ b/drivers/hwmon/lm90.c > @@ -89,6 +89,8 @@ > #include <linux/err.h> > #include <linux/mutex.h> > #include <linux/sysfs.h> > +#include <linux/interrupt.h> > +#include <linux/of_irq.h> > > /* > * Addresses to scan > @@ -302,6 +304,7 @@ static const struct lm90_params lm90_params[] = { > struct lm90_data { > struct device *hwmon_dev; > struct mutex update_lock; > + struct work_struct irq_work; > char valid; /* zero until following fields are valid */ > unsigned long last_updated; /* in jiffies */ > int kind; > @@ -1418,6 +1421,29 @@ static void lm90_init_client(struct i2c_client *client) > i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config); > } > > +static void lm90_alert(struct i2c_client *client, unsigned int flag); > + > +static void lm90_irq_work(struct work_struct *work) > +{ > + struct lm90_data *data = container_of(work, struct lm90_data, > + irq_work); > + struct i2c_client *client = to_i2c_client(data->hwmon_dev->parent); > + > + lm90_alert(client, 0); > + > + enable_irq(client->irq); > +} > + > +static irqreturn_t lm90_irq(int irq, void *dev_id) > +{ > + struct lm90_data *data = dev_id; > + > + disable_irq_nosync(irq); > + schedule_work(&data->irq_work); > + > + return IRQ_HANDLED; > +} > + > static int lm90_probe(struct i2c_client *client, > const struct i2c_device_id *id) > { > @@ -1494,6 +1520,17 @@ static int lm90_probe(struct i2c_client *client, > goto exit_remove_files; > } > > + if (client->irq >= 0) { > + INIT_WORK(&data->irq_work, lm90_irq_work); > + dev_dbg(dev, "lm90 irq: %d\n", client->irq); > + err = request_irq(client->irq, lm90_irq, IRQF_TRIGGER_LOW, > + "lm90", data); request_threaded_irq or even better devm_request_threaded_irq would be better here. > + if (err < 0) { > + dev_err(dev, "cannot request interrupt\n"); > + goto exit_remove_files; > + } > + } > + > return 0; > > exit_remove_files: > @@ -1507,6 +1544,7 @@ static int lm90_remove(struct i2c_client *client) > { > struct lm90_data *data = i2c_get_clientdata(client); > > + free_irq(client->irq, data); > hwmon_device_unregister(data->hwmon_dev); > lm90_remove_files(client, data); > lm90_restore_conf(client, data); > -- > 1.7.9.5 > > > _______________________________________________ > lm-sensors mailing list > lm-sensors@lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/19/2013 11:34 AM, Guenter Roeck wrote: > On Mon, Feb 18, 2013 at 07:30:25PM +0800, Wei Ni wrote: >> Add support to handle irq. When the temperature touch the limit value, the >> driver can handle the interrupt. >> >> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> >> Signed-off-by: Wei Ni <wni@nvidia.com> >> --- >> drivers/hwmon/lm90.c | 38 ++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 38 insertions(+) >> >> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c >> index caf01b0..80311ef 100644 >> --- a/drivers/hwmon/lm90.c >> +++ b/drivers/hwmon/lm90.c >> @@ -89,6 +89,8 @@ >> #include <linux/err.h> >> #include <linux/mutex.h> >> #include <linux/sysfs.h> >> +#include <linux/interrupt.h> >> +#include <linux/of_irq.h> >> >> /* >> * Addresses to scan >> @@ -302,6 +304,7 @@ static const struct lm90_params lm90_params[] = { >> struct lm90_data { >> struct device *hwmon_dev; >> struct mutex update_lock; >> + struct work_struct irq_work; >> char valid; /* zero until following fields are valid */ >> unsigned long last_updated; /* in jiffies */ >> int kind; >> @@ -1418,6 +1421,29 @@ static void lm90_init_client(struct i2c_client *client) >> i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config); >> } >> >> +static void lm90_alert(struct i2c_client *client, unsigned int flag); >> + >> +static void lm90_irq_work(struct work_struct *work) >> +{ >> + struct lm90_data *data = container_of(work, struct lm90_data, >> + irq_work); >> + struct i2c_client *client = to_i2c_client(data->hwmon_dev->parent); >> + >> + lm90_alert(client, 0); >> + >> + enable_irq(client->irq); >> +} >> + >> +static irqreturn_t lm90_irq(int irq, void *dev_id) >> +{ >> + struct lm90_data *data = dev_id; >> + >> + disable_irq_nosync(irq); >> + schedule_work(&data->irq_work); >> + >> + return IRQ_HANDLED; >> +} >> + >> static int lm90_probe(struct i2c_client *client, >> const struct i2c_device_id *id) >> { >> @@ -1494,6 +1520,17 @@ static int lm90_probe(struct i2c_client *client, >> goto exit_remove_files; >> } >> >> + if (client->irq >= 0) { >> + INIT_WORK(&data->irq_work, lm90_irq_work); >> + dev_dbg(dev, "lm90 irq: %d\n", client->irq); >> + err = request_irq(client->irq, lm90_irq, IRQF_TRIGGER_LOW, >> + "lm90", data); > > request_threaded_irq or even better devm_request_threaded_irq would be better here. yes, it's better to use request_threaded_irq here. we can set lm90_irq() as interrupt handle, and set lm90_alert() as thread function. I will try it on my next version. > >> + if (err < 0) { >> + dev_err(dev, "cannot request interrupt\n"); >> + goto exit_remove_files; >> + } >> + } >> + >> return 0; >> >> exit_remove_files: >> @@ -1507,6 +1544,7 @@ static int lm90_remove(struct i2c_client *client) >> { >> struct lm90_data *data = i2c_get_clientdata(client); >> >> + free_irq(client->irq, data); >> hwmon_device_unregister(data->hwmon_dev); >> lm90_remove_files(client, data); >> lm90_restore_conf(client, data); >> -- >> 1.7.9.5 >> >> >> _______________________________________________ >> lm-sensors mailing list >> lm-sensors@lm-sensors.org >> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-tegra" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/18/2013 04:30 AM, Wei Ni wrote: > Add support to handle irq. When the temperature touch the limit value, the > driver can handle the interrupt. > diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c > +static void lm90_irq_work(struct work_struct *work) ... > + enable_irq(client->irq); > +} > + > +static irqreturn_t lm90_irq(int irq, void *dev_id) > +{ > + struct lm90_data *data = dev_id; > + > + disable_irq_nosync(irq); I think IRQF_ONESHOT would enable you to remove the manual enable/disable_irq calls. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/20/2013 08:00 AM, Stephen Warren wrote: > On 02/18/2013 04:30 AM, Wei Ni wrote: >> Add support to handle irq. When the temperature touch the limit value, the >> driver can handle the interrupt. > >> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c > >> +static void lm90_irq_work(struct work_struct *work) > ... >> + enable_irq(client->irq); >> +} >> + >> +static irqreturn_t lm90_irq(int irq, void *dev_id) >> +{ >> + struct lm90_data *data = dev_id; >> + >> + disable_irq_nosync(irq); > > I think IRQF_ONESHOT would enable you to remove the manual > enable/disable_irq calls. Oh, right. Using a threaded IRQ with IRQF_ONESHOT would make that happen transparently. Wasn't aware of that, thanks. Alex. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/20/2013 11:27 AM, Alex Courbot wrote: > On 02/20/2013 08:00 AM, Stephen Warren wrote: >> On 02/18/2013 04:30 AM, Wei Ni wrote: >>> Add support to handle irq. When the temperature touch the limit value, the >>> driver can handle the interrupt. >> >>> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c >> >>> +static void lm90_irq_work(struct work_struct *work) >> ... >>> + enable_irq(client->irq); >>> +} >>> + >>> +static irqreturn_t lm90_irq(int irq, void *dev_id) >>> +{ >>> + struct lm90_data *data = dev_id; >>> + >>> + disable_irq_nosync(irq); >> >> I think IRQF_ONESHOT would enable you to remove the manual >> enable/disable_irq calls. > > Oh, right. Using a threaded IRQ with IRQF_ONESHOT would make that happen > transparently. Wasn't aware of that, thanks. Oh, yes, I will use it in my next version. Thanks. Wei. > > Alex. > > -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index caf01b0..80311ef 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -89,6 +89,8 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/sysfs.h> +#include <linux/interrupt.h> +#include <linux/of_irq.h> /* * Addresses to scan @@ -302,6 +304,7 @@ static const struct lm90_params lm90_params[] = { struct lm90_data { struct device *hwmon_dev; struct mutex update_lock; + struct work_struct irq_work; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ int kind; @@ -1418,6 +1421,29 @@ static void lm90_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config); } +static void lm90_alert(struct i2c_client *client, unsigned int flag); + +static void lm90_irq_work(struct work_struct *work) +{ + struct lm90_data *data = container_of(work, struct lm90_data, + irq_work); + struct i2c_client *client = to_i2c_client(data->hwmon_dev->parent); + + lm90_alert(client, 0); + + enable_irq(client->irq); +} + +static irqreturn_t lm90_irq(int irq, void *dev_id) +{ + struct lm90_data *data = dev_id; + + disable_irq_nosync(irq); + schedule_work(&data->irq_work); + + return IRQ_HANDLED; +} + static int lm90_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1494,6 +1520,17 @@ static int lm90_probe(struct i2c_client *client, goto exit_remove_files; } + if (client->irq >= 0) { + INIT_WORK(&data->irq_work, lm90_irq_work); + dev_dbg(dev, "lm90 irq: %d\n", client->irq); + err = request_irq(client->irq, lm90_irq, IRQF_TRIGGER_LOW, + "lm90", data); + if (err < 0) { + dev_err(dev, "cannot request interrupt\n"); + goto exit_remove_files; + } + } + return 0; exit_remove_files: @@ -1507,6 +1544,7 @@ static int lm90_remove(struct i2c_client *client) { struct lm90_data *data = i2c_get_clientdata(client); + free_irq(client->irq, data); hwmon_device_unregister(data->hwmon_dev); lm90_remove_files(client, data); lm90_restore_conf(client, data);