Message ID | 1361130325-5202-10-git-send-email-otavio@ossystems.com.br |
---|---|
State | Superseded |
Headers | show |
On Sun, Feb 17, 2013 at 4:45 PM, Otavio Salvador <otavio@ossystems.com.br> wrote: > +#ifdef CONFIG_CMD_USB > + /* Enable LAN9512 */ > + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); > +#endif What about doing like we do with other imx devices and write something like: gpio_direction_output(MXS_GPIO_NR(0, 17), 1); ,where #define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) This also aligns with the kernel style.
On Mon, Feb 18, 2013 at 8:16 PM, Fabio Estevam <festevam@gmail.com> wrote: > On Sun, Feb 17, 2013 at 4:45 PM, Otavio Salvador > <otavio@ossystems.com.br> wrote: > >> +#ifdef CONFIG_CMD_USB >> + /* Enable LAN9512 */ >> + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); >> +#endif > > What about doing like we do with other imx devices and write something like: > > gpio_direction_output(MXS_GPIO_NR(0, 17), 1); > > ,where > > #define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) > > This also aligns with the kernel style. Awesome; I have added it to v5. Thx!
Dear Otavio Salvador, > On Mon, Feb 18, 2013 at 8:16 PM, Fabio Estevam <festevam@gmail.com> wrote: > > On Sun, Feb 17, 2013 at 4:45 PM, Otavio Salvador > > > > <otavio@ossystems.com.br> wrote: > >> +#ifdef CONFIG_CMD_USB > >> + /* Enable LAN9512 */ > >> + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); > >> +#endif > > > > What about doing like we do with other imx devices and write something > > like: > > > > gpio_direction_output(MXS_GPIO_NR(0, 17), 1); > > > > ,where > > > > #define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) > > > > This also aligns with the kernel style. > > Awesome; I have added it to v5. Thx! This will bring in quite a lot of inconsistency, will it not? Best regards, Marek Vasut
On Mon, Feb 18, 2013 at 10:38 PM, Marek Vasut <marex@denx.de> wrote: > Dear Otavio Salvador, > >> On Mon, Feb 18, 2013 at 8:16 PM, Fabio Estevam <festevam@gmail.com> wrote: >> > On Sun, Feb 17, 2013 at 4:45 PM, Otavio Salvador >> > >> > <otavio@ossystems.com.br> wrote: >> >> +#ifdef CONFIG_CMD_USB >> >> + /* Enable LAN9512 */ >> >> + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); >> >> +#endif >> > >> > What about doing like we do with other imx devices and write something >> > like: >> > >> > gpio_direction_output(MXS_GPIO_NR(0, 17), 1); >> > >> > ,where >> > >> > #define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) >> > >> > This also aligns with the kernel style. >> >> Awesome; I have added it to v5. Thx! > > This will bring in quite a lot of inconsistency, will it not? Really? why?
Dear Otavio Salvador, > On Mon, Feb 18, 2013 at 10:38 PM, Marek Vasut <marex@denx.de> wrote: > > Dear Otavio Salvador, > > > >> On Mon, Feb 18, 2013 at 8:16 PM, Fabio Estevam <festevam@gmail.com> wrote: > >> > On Sun, Feb 17, 2013 at 4:45 PM, Otavio Salvador > >> > > >> > <otavio@ossystems.com.br> wrote: > >> >> +#ifdef CONFIG_CMD_USB > >> >> + /* Enable LAN9512 */ > >> >> + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); > >> >> +#endif > >> > > >> > What about doing like we do with other imx devices and write something > >> > like: > >> > > >> > gpio_direction_output(MXS_GPIO_NR(0, 17), 1); > >> > > >> > ,where > >> > > >> > #define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) > >> > > >> > This also aligns with the kernel style. > >> > >> Awesome; I have added it to v5. Thx! > > > > This will bring in quite a lot of inconsistency, will it not? > > Really? why? Because this will not be used globally with all GPIOs, but only locally for this one case. So my suggestion is to postpone this change and do this in one large swipe afterwards. Best regards, Marek Vasut
On Tue, Feb 19, 2013 at 9:21 AM, Marek Vasut <marex@denx.de> wrote: > Dear Otavio Salvador, > >> On Mon, Feb 18, 2013 at 10:38 PM, Marek Vasut <marex@denx.de> wrote: >> > Dear Otavio Salvador, >> > >> >> On Mon, Feb 18, 2013 at 8:16 PM, Fabio Estevam <festevam@gmail.com> wrote: >> >> > On Sun, Feb 17, 2013 at 4:45 PM, Otavio Salvador >> >> > >> >> > <otavio@ossystems.com.br> wrote: >> >> >> +#ifdef CONFIG_CMD_USB >> >> >> + /* Enable LAN9512 */ >> >> >> + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); >> >> >> +#endif >> >> > >> >> > What about doing like we do with other imx devices and write something >> >> > like: >> >> > >> >> > gpio_direction_output(MXS_GPIO_NR(0, 17), 1); >> >> > >> >> > ,where >> >> > >> >> > #define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) >> >> > >> >> > This also aligns with the kernel style. >> >> >> >> Awesome; I have added it to v5. Thx! >> > >> > This will bring in quite a lot of inconsistency, will it not? >> >> Really? why? > > Because this will not be used globally with all GPIOs, but only locally for this > one case. So my suggestion is to postpone this change and do this in one large > swipe afterwards. I see; I agree with you.
On Tue, Feb 19, 2013 at 10:22 AM, Otavio Salvador <otavio@ossystems.com.br> wrote: >> Because this will not be used globally with all GPIOs, but only locally for this >> one case. So my suggestion is to postpone this change and do this in one large >> swipe afterwards. > > I see; I agree with you. I can take care of this GPIO change later then.
diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c index 2501417..9ed7718 100644 --- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c +++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c @@ -23,6 +23,7 @@ */ #include <common.h> +#include <asm/gpio.h> #include <asm/io.h> #include <asm/arch/iomux-mx23.h> #include <asm/arch/imx-regs.h> @@ -45,6 +46,11 @@ int board_early_init_f(void) /* SSP0 clock at 96MHz */ mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); +#ifdef CONFIG_CMD_USB + /* Enable LAN9512 */ + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); +#endif + return 0; } diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c index 3bbf5ad..a96c293 100644 --- a/board/olimex/mx23_olinuxino/spl_boot.c +++ b/board/olimex/mx23_olinuxino/spl_boot.c @@ -95,6 +95,10 @@ const iomux_cfg_t iomux_setup[] = { MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP, MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP, MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP, + + /* Ethernet */ + MX23_PAD_GPMI_ALE__GPIO_0_17 | + (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), }; void board_init_ll(void) diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index d019944..e081c49 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -60,6 +60,7 @@ #define CONFIG_CMD_GPIO #define CONFIG_CMD_LED #define CONFIG_CMD_MMC +#define CONFIG_CMD_USB /* * Memory configurations @@ -140,6 +141,15 @@ */ #define CONFIG_APBH_DMA +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MXS +#define CONFIG_EHCI_MXS_PORT 0 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#endif + /* * Boot Linux */
This enabled USB support for the mx23_olinuxino board. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> --- Changes in v3: None Changes in v2: - Add changes for allow use of the USB hub board/olimex/mx23_olinuxino/mx23_olinuxino.c | 6 ++++++ board/olimex/mx23_olinuxino/spl_boot.c | 4 ++++ include/configs/mx23_olinuxino.h | 10 ++++++++++ 3 files changed, 20 insertions(+)