[1/1] i2c-i801: Add Device IDs for Intel Wellsburg PCH

This patch adds the SMBus Device IDs for the Intel Wellsburg PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
---
Change notes for v2:
* Rebased on [PATCH v2] i2c-i801: SMBus patch for Intel Avoton DeviceIDs
* Added 3 Device IDs for additional SMBus Devices

 Documentation/i2c/busses/i2c-i801 |    1 +
 drivers/i2c/busses/Kconfig        |    1 +
 drivers/i2c/busses/i2c-i801.c     |   12 ++++++++++++
 3 files changed, 14 insertions(+), 0 deletions(-)

Hi James,

On Tue, 12 Feb 2013 14:04:02 -0800, James Ralston wrote:
> This patch adds the SMBus Device IDs for the Intel Wellsburg PCH
> 
> Signed-off-by: James Ralston <james.d.ralston@intel.com>
> ---
> Change notes for v2:
> * Rebased on [PATCH v2] i2c-i801: SMBus patch for Intel Avoton DeviceIDs

Thanks, this applies fine now.

> * Added 3 Device IDs for additional SMBus Devices
> 
>  Documentation/i2c/busses/i2c-i801 |    1 +
>  drivers/i2c/busses/Kconfig        |    1 +
>  drivers/i2c/busses/i2c-i801.c     |   12 ++++++++++++
>  3 files changed, 14 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
> index 8d71d57..d55b8ab 100644
> --- a/Documentation/i2c/busses/i2c-i801
> +++ b/Documentation/i2c/busses/i2c-i801
> @@ -23,6 +23,7 @@ Supported adapters:
>    * Intel Lynx Point (PCH)
>    * Intel Lynx Point-LP (PCH)
>    * Intel Avoton (SOC)
> +  * Intel Wellsburg (PCH)
>     Datasheets: Publicly available at the Intel website
>  
>  On Intel Patsburg and later chipsets, both the normal host SMBus controller
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 77d2887..059a481 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -107,6 +107,7 @@ config I2C_I801
>  	    Lynx Point (PCH)
>  	    Lynx Point-LP (PCH)
>  	    Avoton (SOC)
> +	    Wellsburg (PCH)
>  
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called i2c-i801.
> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
> index b00c29d..c257a16 100644
> --- a/drivers/i2c/busses/i2c-i801.c
> +++ b/drivers/i2c/busses/i2c-i801.c
> @@ -54,6 +54,10 @@
>    Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
>    Lynx Point-LP (PCH)   0x9c22     32     hard     yes     yes     yes
>    Avoton (SOC)          0x1f3c     32     hard     yes     yes     yes
> +  Wellsburg (PCH)       0x8d22     32     hard     yes     yes     yes
> +  Wellsburg (PCH)       0x8d7d     32     hard     yes     yes     yes
> +  Wellsburg (PCH)       0x8d7e     32     hard     yes     yes     yes
> +  Wellsburg (PCH)       0x8d7f     32     hard     yes     yes     yes
>  
>    Features supported by this driver:
>    Software PEC                     no
> @@ -167,6 +171,10 @@
>  #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
>  #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
>  #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
> +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS0	0x8d22
> +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS1	0x8d7d
> +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS2	0x8d7e
> +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS3	0x8d7f

Are these 3 extra channels like Patsburg's "IDF" channels? If so, then
please name them accordingly and make sure to set flag FEATURE_IDF on
them, as is done for PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF*.

>  #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS	0x9c22
>  
>  struct i801_mux_config {
> @@ -801,6 +809,10 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS0) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS1) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS2) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS3) },
>  	{ 0, }
>  };
>