@@ -12,13 +12,4 @@ source "drivers/net/wireless/ti/wl18xx/Kconfig"
# keep last for automatic dependencies
source "drivers/net/wireless/ti/wlcore/Kconfig"
-
-config WILINK_PLATFORM_DATA
- bool "TI WiLink platform data"
- depends on WLCORE_SDIO || WL1251_SDIO
- default y
- ---help---
- Small platform data bit needed to pass data to the sdio modules.
-
-
endif # WL_TI
@@ -1,7 +1,5 @@
obj-$(CONFIG_WLCORE) += wlcore/
obj-$(CONFIG_WL12XX) += wl12xx/
+obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wlcore/
obj-$(CONFIG_WL1251) += wl1251/
obj-$(CONFIG_WL18XX) += wl18xx/
-
-# small builtin driver bit
-obj-$(CONFIG_WILINK_PLATFORM_DATA) += wilink_platform_data.o
@@ -68,8 +68,7 @@ int wl1251_ps_elp_wakeup(struct wl1251 *wl)
unsigned long timeout, start;
u32 elp_reg;
- if (delayed_work_pending(&wl->elp_work))
- cancel_delayed_work(&wl->elp_work);
+ cancel_delayed_work(&wl->elp_work);
if (!wl->elp)
return 0;
@@ -1703,8 +1703,7 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
static int wl12xx_setup(struct wl1271 *wl)
{
struct wl12xx_priv *priv = wl->priv;
- struct wlcore_platdev_data *pdev_data = wl->pdev->dev.platform_data;
- struct wl12xx_platform_data *pdata = pdev_data->pdata;
+ struct wl12xx_platform_data *pdata = wl->pdev->dev.platform_data;
wl->rtable = wl12xx_rtable;
wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS;
@@ -23,7 +23,7 @@
#define __WL18XX_CONF_H__
#define WL18XX_CONF_MAGIC 0x10e100ca
-#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0006)
+#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0005)
#define WL18XX_CONF_MASK 0x0000ffff
#define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \
sizeof(struct wl18xx_priv_conf))
@@ -70,9 +70,8 @@ struct wl18xx_mac_and_phy_params {
u8 pwr_limit_reference_11_abg;
u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
u8 pwr_limit_reference_11p;
- u8 spare1;
- u8 per_chan_bo_mode_11_abg[13];
- u8 per_chan_bo_mode_11_p[4];
+ u8 spare1[9];
+ u8 spare2[9];
u8 primary_clock_setting_time;
u8 clock_valid_on_wake_up;
u8 secondary_clock_setting_time;
@@ -547,11 +547,6 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
.pwr_limit_reference_11p = 0x64,
- .per_chan_bo_mode_11_abg = { 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00,
- 0x00 },
- .per_chan_bo_mode_11_p = { 0x00, 0x00, 0x00, 0x00 },
.per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff },
.psat = 0,
@@ -33,3 +33,8 @@ config WLCORE_SDIO
If you choose to build a module, it'll be called wlcore_sdio.
Say N if unsure.
+
+config WL12XX_PLATFORM_DATA
+ bool
+ depends on WLCORE_SDIO != n || WL1251_SDIO != n
+ default y
@@ -9,4 +9,7 @@ obj-$(CONFIG_WLCORE) += wlcore.o
obj-$(CONFIG_WLCORE_SPI) += wlcore_spi.o
obj-$(CONFIG_WLCORE_SDIO) += wlcore_sdio.o
+# small builtin driver bit
+obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx_platform_data.o
+
ccflags-y += -D__CHECK_ENDIAN__
@@ -84,8 +84,8 @@ out:
static int wlcore_validate_fw_ver(struct wl1271 *wl)
{
unsigned int *fw_ver = wl->chip.fw_ver;
- unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_MULTI) ?
- wl->min_mr_fw_ver : wl->min_sr_fw_ver;
+ unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_NORMAL) ?
+ wl->min_sr_fw_ver : wl->min_mr_fw_ver;
char min_fw_str[32] = "";
int i;
@@ -510,12 +510,10 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif)
cmd->sta.hlid = wlvif->sta.hlid;
cmd->sta.session = wl->session_ids[wlvif->sta.hlid];
/*
- * We don't have the correct remote rates in this stage. The
- * rates will be reconfigured later, after association, if the
- * firmware supports ACX_PEER_CAP. Otherwise, there's nothing
- * we can do, so use all supported_rates here.
+ * We don't have the correct remote rates in this stage. the rates
+ * will be reconfigured later, after authorization.
*/
- cmd->sta.remote_rates = cpu_to_le32(supported_rates);
+ cmd->sta.remote_rates = cpu_to_le32(wlvif->rate_set);
wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d "
"basic_rate_set: 0x%x, remote_rates: 0x%x",
@@ -2162,7 +2162,7 @@ static int wl12xx_init_vif_data(struct wl1271 *wl, struct ieee80211_vif *vif)
return 0;
}
-static int wl12xx_init_fw(struct wl1271 *wl)
+static bool wl12xx_init_fw(struct wl1271 *wl)
{
int retries = WL1271_BOOT_RETRIES;
bool booted = false;
@@ -2228,7 +2228,7 @@ power_off:
wl->state = WLCORE_STATE_ON;
out:
- return ret;
+ return booted;
}
static bool wl12xx_dev_role_started(struct wl12xx_vif *wlvif)
@@ -2371,6 +2371,7 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
struct vif_counter_data vif_count;
int ret = 0;
u8 role_type;
+ bool booted = false;
vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER |
IEEE80211_VIF_SUPPORTS_CQM_RSSI;
@@ -2431,9 +2432,11 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
*/
memcpy(wl->addresses[0].addr, vif->addr, ETH_ALEN);
- ret = wl12xx_init_fw(wl);
- if (ret < 0)
+ booted = wl12xx_init_fw(wl);
+ if (!booted) {
+ ret = -EINVAL;
goto out;
+ }
}
ret = wl12xx_cmd_role_enable(wl, vif->addr,
@@ -5963,8 +5966,7 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
{
struct wl1271 *wl = context;
struct platform_device *pdev = wl->pdev;
- struct wlcore_platdev_data *pdev_data = pdev->dev.platform_data;
- struct wl12xx_platform_data *pdata = pdev_data->pdata;
+ struct wl12xx_platform_data *pdata = pdev->dev.platform_data;
unsigned long irqflags;
int ret;
@@ -5993,7 +5995,8 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
wl->irq = platform_get_irq(pdev, 0);
wl->platform_quirks = pdata->platform_quirks;
- wl->if_ops = pdev_data->if_ops;
+ wl->set_power = pdata->set_power;
+ wl->if_ops = pdata->ops;
if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
irqflags = IRQF_TRIGGER_RISING;
@@ -229,10 +229,8 @@ static int wl1271_probe(struct sdio_func *func,
return -ENODEV;
pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL);
- if (!pdev_data) {
- dev_err(&func->dev, "can't allocate platdev_data\n");
+ if (!pdev_data)
goto out;
- }
pdev_data->if_ops = &sdio_ops;
@@ -332,10 +332,8 @@ static int wl1271_probe(struct spi_device *spi)
int ret = -ENOMEM;
pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL);
- if (!pdev_data) {
- dev_err(&spi->dev, "can't allocate platdev_data\n");
+ if (!pdev_data)
goto out;
- }
pdev_data->pdata = spi->dev.platform_data;
if (!pdev_data->pdata) {
new file mode 100644
@@ -0,0 +1,49 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/wl12xx.h>
+
+static struct wl12xx_platform_data *platform_data;
+
+int __init wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
+{
+ if (platform_data)
+ return -EBUSY;
+ if (!data)
+ return -EINVAL;
+
+ platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
+ if (!platform_data)
+ return -ENOMEM;
+
+ return 0;
+}
+
+struct wl12xx_platform_data *wl12xx_get_platform_data(void)
+{
+ if (!platform_data)
+ return ERR_PTR(-ENODEV);
+
+ return platform_data;
+}
+EXPORT_SYMBOL(wl12xx_get_platform_data);
@@ -183,6 +183,7 @@ struct wl1271 {
struct wl1271_if_operations *if_ops;
+ void (*set_power)(bool enable);
int irq;
spinlock_t wl_lock;
@@ -111,9 +111,9 @@ enum {
struct wl1271_chip {
u32 id;
- char fw_ver_str[ETHTOOL_BUSINFO_LEN];
+ char fw_ver_str[ETHTOOL_FWVERS_LEN];
unsigned int fw_ver[NUM_FW_VER];
- char phy_fw_ver_str[ETHTOOL_BUSINFO_LEN];
+ char phy_fw_ver_str[ETHTOOL_FWVERS_LEN];
};
#define NUM_TX_QUEUES 4
@@ -206,11 +206,6 @@ struct wl1271_if_operations {
void (*set_block_size) (struct device *child, unsigned int blksz);
};
-struct wlcore_platdev_data {
- struct wl12xx_platform_data *pdata;
- struct wl1271_if_operations *if_ops;
-};
-
#define MAX_NUM_KEYS 14
#define MAX_KEY_SIZE 32
In commit 0d2e7a5c (wireless: Remove unnecessary alloc/OOM messages, alloc cleanups) OOM messages after alloc were removed from the wlcore modules. Commit afb43e6d (wlcore: remove if_ops from platform_data) reintroduced a couple of those. This patch removes them. Signed-off-by: Luciano Coelho <coelho@ti.com> --- John, Can you apply this directly on wireless-next after you process my latest pull-request? Thanks! drivers/net/wireless/ti/Kconfig | 9 ---- drivers/net/wireless/ti/Makefile | 4 +- drivers/net/wireless/ti/wl1251/ps.c | 3 +- drivers/net/wireless/ti/wl12xx/main.c | 3 +- drivers/net/wireless/ti/wl18xx/conf.h | 7 ++- drivers/net/wireless/ti/wl18xx/main.c | 5 -- drivers/net/wireless/ti/wlcore/Kconfig | 5 ++ drivers/net/wireless/ti/wlcore/Makefile | 3 ++ drivers/net/wireless/ti/wlcore/boot.c | 4 +- drivers/net/wireless/ti/wlcore/cmd.c | 8 ++-- drivers/net/wireless/ti/wlcore/main.c | 17 ++++--- drivers/net/wireless/ti/wlcore/sdio.c | 4 +- drivers/net/wireless/ti/wlcore/spi.c | 4 +- .../net/wireless/ti/wlcore/wl12xx_platform_data.c | 49 ++++++++++++++++++++ drivers/net/wireless/ti/wlcore/wlcore.h | 1 + drivers/net/wireless/ti/wlcore/wlcore_i.h | 9 +--- 16 files changed, 83 insertions(+), 52 deletions(-) create mode 100644 drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c