diff mbox

[U-Boot,v2,7/7] Tegra114: Add/enable Dalmore build (T114 reference board)

Message ID 1358543537-18035-8-git-send-email-twarren@nvidia.com
State Superseded
Delegated to: Tom Warren
Headers show

Commit Message

Tom Warren Jan. 18, 2013, 9:12 p.m. UTC 
This build is stripped down. It boots to the command prompt.
GPIO is the only peripheral supported. Others TBD.

Signed-off-by: Tom Warren <twarren@nvidia.com>
---
Changes in v2:
- update all new copyright header dates to 2013
- use correct table names in pinmux_init

 board/nvidia/dalmore/Makefile                |   36 ++++
 board/nvidia/dalmore/dalmore.c               |   32 ++++
 board/nvidia/dalmore/pinmux-config-dalmore.h |  249 ++++++++++++++++++++++++++
 boards.cfg                                   |    1 +
 include/configs/dalmore.h                    |   50 +++++
 include/configs/tegra114-common.h            |   79 ++++++++
 6 files changed, 447 insertions(+), 0 deletions(-)
 create mode 100644 board/nvidia/dalmore/Makefile
 create mode 100644 board/nvidia/dalmore/dalmore.c
 create mode 100644 board/nvidia/dalmore/pinmux-config-dalmore.h
 create mode 100644 include/configs/dalmore.h
 create mode 100644 include/configs/tegra114-common.h

Comments

Stephen Warren Jan. 19, 2013, 12:03 a.m. UTC | #1 
On 01/18/2013 02:12 PM, Tom Warren wrote:
> This build is stripped down. It boots to the command prompt.
> GPIO is the only peripheral supported. Others TBD.

Aside from the couple of comment I already made, the series briefly,
Reviewed-by: Stephen Warren <swarren@nvidia.com>
diff mbox

Patch

diff --git a/board/nvidia/dalmore/Makefile b/board/nvidia/dalmore/Makefile
new file mode 100644
index 0000000..699b9f6
--- /dev/null
+++ b/board/nvidia/dalmore/Makefile
@@ -0,0 +1,36 @@ 
+#
+# Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
new file mode 100644
index 0000000..aca3c7d
--- /dev/null
+++ b/board/nvidia/dalmore/dalmore.c
@@ -0,0 +1,32 @@ 
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/arch/pinmux.h>
+#include "pinmux-config-dalmore.h"
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+	pinmux_config_table(tegra114_pinmux_common,
+		ARRAY_SIZE(tegra114_pinmux_common));
+
+	pinmux_config_table(unused_pins_lowpower,
+		ARRAY_SIZE(unused_pins_lowpower));
+}
diff --git a/board/nvidia/dalmore/pinmux-config-dalmore.h b/board/nvidia/dalmore/pinmux-config-dalmore.h
new file mode 100644
index 0000000..3dd47da
--- /dev/null
+++ b/board/nvidia/dalmore/pinmux-config-dalmore.h
@@ -0,0 +1,249 @@ 
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _PINMUX_CONFIG_DALMORE_H_
+#define _PINMUX_CONFIG_DALMORE_H_
+
+#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io)   \
+	{							\
+		.pingroup	= PINGRP_##_pingroup,		\
+		.func		= PMUX_FUNC_##_mux,		\
+		.pull		= PMUX_PULL_##_pull,		\
+		.tristate	= PMUX_TRI_##_tri,		\
+		.io		= PMUX_PIN_##_io,		\
+		.lock		= PMUX_PIN_LOCK_DEFAULT,	\
+		.od		= PMUX_PIN_OD_DEFAULT,		\
+		.ioreset	= PMUX_PIN_IO_RESET_DEFAULT,	\
+	}
+
+#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \
+	{							\
+		.pingroup	= PINGRP_##_pingroup,		\
+		.func		= PMUX_FUNC_##_mux,		\
+		.pull		= PMUX_PULL_##_pull,		\
+		.tristate	= PMUX_TRI_##_tri,		\
+		.io		= PMUX_PIN_##_io,		\
+		.lock		= PMUX_PIN_LOCK_##_lock,	\
+		.od		= PMUX_PIN_OD_##_od,		\
+		.ioreset	= PMUX_PIN_IO_RESET_DEFAULT,	\
+	}
+
+#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
+	{							\
+		.pingroup	= PINGRP_##_pingroup,		\
+		.func		= PMUX_FUNC_##_mux,		\
+		.pull		= PMUX_PULL_##_pull,		\
+		.tristate	= PMUX_TRI_##_tri,		\
+		.io		= PMUX_PIN_##_io,		\
+		.lock		= PMUX_PIN_LOCK_##_lock,	\
+		.od		= PMUX_PIN_OD_DEFAULT,		\
+		.ioreset	= PMUX_PIN_IO_RESET_##_ioreset  \
+	}
+
+static struct pingroup_config tegra114_pinmux_common[] = {
+	/* SDMMC1 pinmux */
+	DEFAULT_PINMUX(SDMMC1_CLK,      SDMMC1,	  NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC1_CMD,      SDMMC1,	  UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT3,     SDMMC1,	  UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT2,     SDMMC1,	  UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT1,     SDMMC1,	  UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT0,     SDMMC1,	  UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC1_WP_N,     SDMMC1,	  UP,     NORMAL,   INPUT),
+
+	/* SDMMC3 pinmux */
+	DEFAULT_PINMUX(SDMMC3_CLK,      SDMMC3,	  NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3,  NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, NORMAL, NORMAL,   OUTPUT),
+
+	DEFAULT_PINMUX(SDMMC3_CMD,      SDMMC3,	  UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT0,     SDMMC3,	  UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT1,     SDMMC3,	  UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT2,     SDMMC3,	  UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT3,     SDMMC3,	  UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(SDMMC3_CD_N,     SDMMC3,   UP,     NORMAL,   INPUT),
+
+	/* SDMMC4 pinmux */
+	LV_PINMUX(SDMMC4_CLK,  SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_CMD,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT0, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT1, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT2, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT3, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT4, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT5, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT6, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT7, SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_RST_N,	RSVD1, DOWN,   NORMAL, INPUT, DISABLE, DISABLE),
+
+	/* I2C1 pinmux */
+	I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
+
+	/* I2C2 pinmux */
+	I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
+
+	/* I2C3 pinmux */
+	I2C_PINMUX(CAM_I2C_SCL,	I2C3, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(CAM_I2C_SDA,	I2C3, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
+
+	/* I2C4 pinmux */
+	I2C_PINMUX(DDC_SCL,	I2C4, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(DDC_SDA,	I2C4, NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
+
+	/* Power I2C pinmux */
+	I2C_PINMUX(PWR_I2C_SCL,	I2CPWR,	NORMAL,	NORMAL,	INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+	DEFAULT_PINMUX(ULPI_DATA0,      UARTA,    NORMAL, NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(ULPI_DATA1,      UARTA,    UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(ULPI_DATA2,      UARTA,    NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(ULPI_DATA3,      UARTA,    NORMAL, NORMAL,   INPUT),
+
+	DEFAULT_PINMUX(ULPI_DATA4,      UARTA,    NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(ULPI_DATA5,      UARTA,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(ULPI_DATA6,      UARTA,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(ULPI_DATA7,      UARTA,	  NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(ULPI_CLK,	UARTD,    NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(ULPI_DIR,	UARTD,    NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(ULPI_NXT,	UARTD,    NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(ULPI_STP,	UARTD,    NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(DAP3_FS,	        I2S2,     NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(DAP3_DIN,	I2S2,     NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(DAP3_DOUT,       I2S2,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(DAP3_SCLK,       I2S2,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(CLK2_OUT,	EXTPERIPH2, NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(CLK2_REQ,	DAP,      NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(UART2_RXD,       UARTB,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(UART2_TXD,       UARTB,	  NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(UART2_RTS_N,     UARTB,	  NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(UART2_CTS_N,     UARTB,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(UART3_TXD,       UARTC,	  NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(UART3_RXD,       UARTC,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(UART3_CTS_N,     UARTC,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(UART3_RTS_N,     UARTC,	  NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(GPIO_PU0,	RSVD1,    NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GPIO_PU1,	RSVD1,    NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(GPIO_PU2,	RSVD1,    NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GPIO_PU3,	RSVD1,    NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GPIO_PU4,	PWM1,     NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(GPIO_PU5,	PWM2,     NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(GPIO_PU6,	RSVD1,    NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(DAP4_FS,         I2S3,     NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(DAP4_DIN,	I2S3,     NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(DAP4_DOUT,       I2S3,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(DAP4_SCLK,       I2S3,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(CLK3_OUT,	EXTPERIPH3, NORMAL, NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(CLK3_REQ,	DEV3,     NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GMI_WP_N,	GMI,      NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GMI_CS2_N,       RSVD1,	  UP,     NORMAL,     INPUT),
+	DEFAULT_PINMUX(GMI_AD8,	        PWM0,     NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(GMI_AD10,	NAND,     NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(GMI_A16,	        UARTD,    NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(GMI_A17,	        UARTD,    NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GMI_A18,	        UARTD,    NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GMI_A19,	        UARTD,    NORMAL, NORMAL,     OUTPUT),
+	DEFAULT_PINMUX(CAM_MCLK,	VI_ALT2,  UP,     NORMAL,     INPUT),
+	DEFAULT_PINMUX(GPIO_PCC1,       RSVD1,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GPIO_PBB0,       RSVD1,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GPIO_PBB3,       VGP3,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GPIO_PBB5,       VGP5,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GPIO_PBB6,       VGP6,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GPIO_PBB7,       I2S4,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(GPIO_PCC2,       I2S4,	  NORMAL, NORMAL,     INPUT),
+	DEFAULT_PINMUX(JTAG_RTCK,       RTCK,	  NORMAL, NORMAL,     OUTPUT),
+
+	/*  KBC keys */
+	DEFAULT_PINMUX(KB_ROW0,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW1,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW2,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW3,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW4,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW5,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW6,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW7,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW8,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW9,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_ROW10,   KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_COL0,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_COL1,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_COL2,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_COL3,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_COL4,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_COL5,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_COL6,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(KB_COL7,    KBC,    UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(GPIO_PV0,   RSVD1,  UP,    NORMAL,    INPUT),
+	DEFAULT_PINMUX(GPIO_PV1,   RSVD1,  UP,    NORMAL,    INPUT),
+
+	DEFAULT_PINMUX(CLK_32K_OUT,     BLINK,	  NORMAL, NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(SYS_CLK_REQ,     SYSCLK,	  NORMAL, NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(OWR,	        OWR,	  NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP1_FS,	        I2S0,     NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP1_DIN,	I2S0,     NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP1_DOUT,       I2S0,	  NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP1_SCLK,       I2S0,	  NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(CLK1_REQ,	DAP,      NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(CLK1_OUT,	EXTPERIPH1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SPDIF_IN,	SPDIF,    NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(SPDIF_OUT,       SPDIF,	  NORMAL, NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(DAP2_FS,	        I2S1,     NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP2_DIN,	I2S1,     NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP2_DOUT,       I2S1,     NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(DAP2_SCLK,       I2S1,	  NORMAL, NORMAL,   INPUT),
+
+	DEFAULT_PINMUX(SPI1_MOSI,       SPI1,     NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(SPI1_SCK,	SPI1,     NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(SPI1_CS0_N,      SPI1,	  NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(SPI1_CS1_N,      SPI1,	  NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(SPI1_CS2_N,      SPI1,	  NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(SPI1_MISO,       SPI1,	  NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(HDMI_CEC,	CEC,      NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(HDMI_INT,        RSVD1,    NORMAL, TRISTATE, INPUT),
+
+	/* GPIOs */
+	/* SDMMC1 CD gpio */
+	DEFAULT_PINMUX(GMI_IORDY,       RSVD1,	  UP,     NORMAL,   INPUT),
+
+	/* Touch RESET */
+	DEFAULT_PINMUX(GMI_AD14,	NAND,     NORMAL, NORMAL,   OUTPUT),
+
+	/* Power rails GPIO */
+	DEFAULT_PINMUX(SPI2_SCK,	GMI,      NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(GPIO_PBB4,       VGP4,     NORMAL, NORMAL,   INPUT),
+	DEFAULT_PINMUX(KB_ROW8,	        KBC,      UP,     NORMAL,   INPUT),
+};
+
+static struct pingroup_config unused_pins_lowpower[] = {
+	DEFAULT_PINMUX(GMI_CS0_N,       NAND,	  UP,     TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_CS3_N,       NAND,	  UP,     TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_CS4_N,       NAND,	  UP,     TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_CS7_N,       NAND,	  UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(GMI_AD0,	        NAND,     NORMAL, TRISTATE, INPUT),
+	DEFAULT_PINMUX(GMI_AD1,	        NAND,     NORMAL, TRISTATE, INPUT),
+	DEFAULT_PINMUX(GMI_AD2,	        NAND,     NORMAL, TRISTATE, INPUT),
+	DEFAULT_PINMUX(GMI_AD3,	        NAND,     NORMAL, TRISTATE, INPUT),
+	DEFAULT_PINMUX(GMI_AD4,	        NAND,     NORMAL, TRISTATE, INPUT),
+	DEFAULT_PINMUX(GMI_AD5,	        NAND,     NORMAL, TRISTATE, INPUT),
+	DEFAULT_PINMUX(GMI_AD6,	        NAND,     NORMAL, TRISTATE, INPUT),
+	DEFAULT_PINMUX(GMI_AD7,	        NAND,     NORMAL, TRISTATE, INPUT),
+	DEFAULT_PINMUX(GMI_AD9,	        PWM1,     NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD11,	NAND,     NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD13,	NAND,     UP,	  NORMAL,   INPUT),
+	DEFAULT_PINMUX(GMI_WR_N,	NAND,     NORMAL, TRISTATE, OUTPUT),
+};
+
+#endif /* _PINMUX_CONFIG_DALMORE_H_ */
diff --git a/boards.cfg b/boards.cfg
index b519bc4..bd2ae3d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -291,6 +291,7 @@  seaboard                     arm         armv7:arm720t seaboard          nvidia
 ventana                      arm         armv7:arm720t ventana           nvidia         tegra20
 whistler                     arm         armv7:arm720t whistler          nvidia         tegra20
 cardhu                       arm         armv7:arm720t cardhu            nvidia         tegra30
+dalmore                      arm         armv7:arm720t dalmore           nvidia         tegra114
 colibri_t20_iris             arm         armv7:arm720t colibri_t20_iris  toradex        tegra20
 u8500_href                   arm         armv7       u8500               st-ericsson    u8500
 snowball                     arm         armv7       snowball               st-ericsson    u8500
diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
new file mode 100644
index 0000000..ce32c80
--- /dev/null
+++ b/include/configs/dalmore.h
@@ -0,0 +1,50 @@ 
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/sizes.h>
+
+#include "tegra114-common.h"
+
+/* Must be off for Dalmore to boot !?!? FIXME */
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Enable fdt support for Dalmore. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE	tegra114-dalmore
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT		"Tegra114 (Dalmore) # "
+#define CONFIG_TEGRA_BOARD_STRING	"NVIDIA Dalmore"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA_ENABLE_UARTD
+#define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
+
+#define CONFIG_MACH_TYPE		MACH_TYPE_DALMORE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ENV_IS_NOWHERE
+
+#define MACH_TYPE_DALMORE	4304	/* not yet in mach-types.h */
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
new file mode 100644
index 0000000..0033530
--- /dev/null
+++ b/include/configs/tegra114-common.h
@@ -0,0 +1,79 @@ 
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA114_COMMON_H_
+#define _TEGRA114_COMMON_H_
+#include "tegra-common.h"
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_TEGRA114			/* in a NVidia Tegra114 core */
+
+/* Environment information, boards can override if required */
+#define CONFIG_LOADADDR		0x80408000	/* def. location for kernel */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LOAD_ADDR	0x80A00800	/* default */
+#define CONFIG_STACKBASE	0x82800000	/* 40MB */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_SYS_TEXT_BASE	0x8010E000
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ *   else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ *   should not overlap that area, or the kernel will have to copy itself
+ *   somewhere else before decompression. Similarly, the address of any other
+ *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ *   this up to 16M allows for a sizable kernel to be decompressed below the
+ *   compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ *   the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"scriptaddr=0x90000000\0" \
+	"kernel_addr_r=0x81000000\0" \
+	"fdt_addr_r=0x82000000\0" \
+	"ramdisk_addr_r=0x82100000\0"
+
+/* Defines for SPL */
+#define CONFIG_SPL_TEXT_BASE		0x80108000
+#define CONFIG_SYS_SPL_MALLOC_START	0x80090000
+#define CONFIG_SPL_STACK		0x800ffffc
+
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/tegra114/u-boot-spl.lds"
+
+#endif /* _TEGRA114_COMMON_H_ */