diff mbox

[v2,2/2] virtio-net: introduce a new control to set macaddr

Message ID 1358315821-29519-3-git-send-email-akong@redhat.com
State New
Headers show

Commit Message

Amos Kong Jan. 16, 2013, 5:57 a.m. UTC 
From: Amos Kong <akong@redhat.com>

Currently we write MAC address to pci config space byte by byte,
this means that we have an intermediate step where mac is wrong.
This patch introduced a new control command to set MAC address
in one time.

VIRTIO_NET_F_CTRL_MAC_ADDR is a new feature bit for compatibility.

Signed-off-by: Amos Kong <akong@redhat.com>
---
 drivers/net/virtio_net.c        | 24 +++++++++++++++++-------
 include/uapi/linux/virtio_net.h |  8 +++++++-
 2 files changed, 24 insertions(+), 8 deletions(-)

Comments

Jason Wang Jan. 16, 2013, 6:20 a.m. UTC | #1 
On Wednesday, January 16, 2013 01:57:01 PM akong@redhat.com wrote:
> From: Amos Kong <akong@redhat.com>
> 
> Currently we write MAC address to pci config space byte by byte,
> this means that we have an intermediate step where mac is wrong.
> This patch introduced a new control command to set MAC address
> in one time.
> 
> VIRTIO_NET_F_CTRL_MAC_ADDR is a new feature bit for compatibility.
> 
> Signed-off-by: Amos Kong <akong@redhat.com>
> ---
>  drivers/net/virtio_net.c        | 24 +++++++++++++++++-------
>  include/uapi/linux/virtio_net.h |  8 +++++++-
>  2 files changed, 24 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 395ab4f..c8901b6 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -802,16 +802,25 @@ static int virtnet_set_mac_address(struct net_device
> *dev, void *p) struct virtnet_info *vi = netdev_priv(dev);
>  	struct virtio_device *vdev = vi->vdev;
>  	int ret;
> +	struct sockaddr *addr = p;
> +	struct scatterlist sg;
> 
> -	ret = eth_mac_addr(dev, p);
> -	if (ret)
> -		return ret;
> -
> -	if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
> +	if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_MAC_ADDR)) {
> +		sg_init_one(&sg, addr->sa_data, dev->addr_len);
> +		if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC,
> +					  VIRTIO_NET_CTRL_MAC_ADDR_SET,
> +					  &sg, 1, 0)) {
> +			dev_warn(&vdev->dev,
> +				 "Failed to set mac address by vq command.\n");
> +			return -EINVAL;
> +		}
> +	} else if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) {
>  		vdev->config->set(vdev, offsetof(struct virtio_net_config, mac),
> -		                  dev->dev_addr, dev->addr_len);
> +				  addr->sa_data, dev->addr_len);
> +	}
> +	ret = eth_mac_addr(dev, p);
> 

The you will the validity check in eth_mac_addr which may result a wrong mac 
address to be set in the hardware (or is there any check in qemu) and a 
inconsistency bettween what kernel assumes and qemu has.

You can take a look at netvsc driver that calls eth_mac_addr() first and 
restore the software mac address when fail to enforce it to hardware.

Thanks
> -	return 0;
> +	return ret;
>  }
> 
>  static struct rtnl_link_stats64 *virtnet_stats(struct net_device *dev,
> @@ -1627,6 +1636,7 @@ static unsigned int features[] = {
>  	VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
>  	VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
>  	VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
> +	VIRTIO_NET_F_CTRL_MAC_ADDR,
>  };
> 
>  static struct virtio_driver virtio_net_driver = {
> diff --git a/include/uapi/linux/virtio_net.h
> b/include/uapi/linux/virtio_net.h index 848e358..a5a8c88 100644
> --- a/include/uapi/linux/virtio_net.h
> +++ b/include/uapi/linux/virtio_net.h
> @@ -53,6 +53,7 @@
>  					 * network */
>  #define VIRTIO_NET_F_MQ	22	/* Device supports Receive Flow
>  					 * Steering */
> +#define VIRTIO_NET_F_CTRL_MAC_ADDR 23	/* Set MAC address */
> 
>  #define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
>  #define VIRTIO_NET_S_ANNOUNCE	2	/* Announcement is needed */
> @@ -127,7 +128,7 @@ typedef __u8 virtio_net_ctrl_ack;
>   #define VIRTIO_NET_CTRL_RX_NOBCAST      5
> 
>  /*
> - * Control the MAC filter table.
> + * Control the MAC
>   *
>   * The MAC filter table is managed by the hypervisor, the guest should
>   * assume the size is infinite.  Filtering should be considered
> @@ -140,6 +141,10 @@ typedef __u8 virtio_net_ctrl_ack;
>   * first sg list contains unicast addresses, the second is for multicast.
>   * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
>   * is available.
> + *
> + * The ADDR_SET command requests one out scatterlist, it contains a
> + * 6 bytes MAC address. This functionality is present if the
> + * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
>   */
>  struct virtio_net_ctrl_mac {
>  	__u32 entries;
> @@ -148,6 +153,7 @@ struct virtio_net_ctrl_mac {
> 
>  #define VIRTIO_NET_CTRL_MAC    1
>   #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
> + #define VIRTIO_NET_CTRL_MAC_ADDR_SET         1
> 
>  /*
>   * Control VLAN filtering
Amos Kong Jan. 16, 2013, 8:24 a.m. UTC | #2 
On Wed, Jan 16, 2013 at 02:20:39PM +0800, Jason Wang wrote:
> On Wednesday, January 16, 2013 01:57:01 PM akong@redhat.com wrote:
> > From: Amos Kong <akong@redhat.com>
> > 
> > Currently we write MAC address to pci config space byte by byte,
> > this means that we have an intermediate step where mac is wrong.
> > This patch introduced a new control command to set MAC address
> > in one time.
> > 
> > VIRTIO_NET_F_CTRL_MAC_ADDR is a new feature bit for compatibility.
> > 
> > Signed-off-by: Amos Kong <akong@redhat.com>
> > ---
> >  drivers/net/virtio_net.c        | 24 +++++++++++++++++-------
> >  include/uapi/linux/virtio_net.h |  8 +++++++-
> >  2 files changed, 24 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > index 395ab4f..c8901b6 100644
> > --- a/drivers/net/virtio_net.c
> > +++ b/drivers/net/virtio_net.c
> > @@ -802,16 +802,25 @@ static int virtnet_set_mac_address(struct net_device
> > *dev, void *p) struct virtnet_info *vi = netdev_priv(dev);
> >  	struct virtio_device *vdev = vi->vdev;
> >  	int ret;
> > +	struct sockaddr *addr = p;
> > +	struct scatterlist sg;
> > 
> > -	ret = eth_mac_addr(dev, p);
> > -	if (ret)
> > -		return ret;
> > -
> > -	if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
> > +	if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_MAC_ADDR)) {
> > +		sg_init_one(&sg, addr->sa_data, dev->addr_len);
> > +		if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC,
> > +					  VIRTIO_NET_CTRL_MAC_ADDR_SET,
> > +					  &sg, 1, 0)) {
> > +			dev_warn(&vdev->dev,
> > +				 "Failed to set mac address by vq command.\n");
> > +			return -EINVAL;
> > +		}
> > +	} else if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) {
> >  		vdev->config->set(vdev, offsetof(struct virtio_net_config, mac),
> > -		                  dev->dev_addr, dev->addr_len);
> > +				  addr->sa_data, dev->addr_len);
> > +	}
> > +	ret = eth_mac_addr(dev, p);
> > 
> 
> The you will the validity check in eth_mac_addr which may result a wrong mac 
> address to be set in the hardware (or is there any check in qemu) and a 
> inconsistency bettween what kernel assumes and qemu has.
> 
> You can take a look at netvsc driver that calls eth_mac_addr() first and 
> restore the software mac address when fail to enforce it to hardware.

Thanks for the catching, I will move eth_mac_addr() back to above,
just restore addr if fail to send command.

I will also use DEFINE_PROP_BIT to fix migration issue, thanks.
 
> Thanks
> > -	return 0;
> > +	return ret;
> >  }
Michael S. Tsirkin Jan. 16, 2013, 8:36 a.m. UTC | #3 
On Wed, Jan 16, 2013 at 04:24:47PM +0800, Amos Kong wrote:
> On Wed, Jan 16, 2013 at 02:20:39PM +0800, Jason Wang wrote:
> > On Wednesday, January 16, 2013 01:57:01 PM akong@redhat.com wrote:
> > > From: Amos Kong <akong@redhat.com>
> > > 
> > > Currently we write MAC address to pci config space byte by byte,
> > > this means that we have an intermediate step where mac is wrong.
> > > This patch introduced a new control command to set MAC address
> > > in one time.
> > > 
> > > VIRTIO_NET_F_CTRL_MAC_ADDR is a new feature bit for compatibility.
> > > 
> > > Signed-off-by: Amos Kong <akong@redhat.com>
> > > ---
> > >  drivers/net/virtio_net.c        | 24 +++++++++++++++++-------
> > >  include/uapi/linux/virtio_net.h |  8 +++++++-
> > >  2 files changed, 24 insertions(+), 8 deletions(-)
> > > 
> > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > > index 395ab4f..c8901b6 100644
> > > --- a/drivers/net/virtio_net.c
> > > +++ b/drivers/net/virtio_net.c
> > > @@ -802,16 +802,25 @@ static int virtnet_set_mac_address(struct net_device
> > > *dev, void *p) struct virtnet_info *vi = netdev_priv(dev);
> > >  	struct virtio_device *vdev = vi->vdev;
> > >  	int ret;
> > > +	struct sockaddr *addr = p;
> > > +	struct scatterlist sg;
> > > 
> > > -	ret = eth_mac_addr(dev, p);
> > > -	if (ret)
> > > -		return ret;
> > > -
> > > -	if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
> > > +	if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_MAC_ADDR)) {
> > > +		sg_init_one(&sg, addr->sa_data, dev->addr_len);
> > > +		if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC,
> > > +					  VIRTIO_NET_CTRL_MAC_ADDR_SET,
> > > +					  &sg, 1, 0)) {
> > > +			dev_warn(&vdev->dev,
> > > +				 "Failed to set mac address by vq command.\n");
> > > +			return -EINVAL;
> > > +		}
> > > +	} else if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) {
> > >  		vdev->config->set(vdev, offsetof(struct virtio_net_config, mac),
> > > -		                  dev->dev_addr, dev->addr_len);
> > > +				  addr->sa_data, dev->addr_len);
> > > +	}
> > > +	ret = eth_mac_addr(dev, p);
> > > 
> > 
> > The you will the validity check in eth_mac_addr which may result a wrong mac 
> > address to be set in the hardware (or is there any check in qemu) and a 
> > inconsistency bettween what kernel assumes and qemu has.
> > 
> > You can take a look at netvsc driver that calls eth_mac_addr() first and 
> > restore the software mac address when fail to enforce it to hardware.
> 
> Thanks for the catching, I will move eth_mac_addr() back to above,
> just restore addr if fail to send command.
> 
> I will also use DEFINE_PROP_BIT to fix migration issue, thanks.

And clear it if running with a compat machine type.

> > Thanks
> > > -	return 0;
> > > +	return ret;
> > >  }
>
diff mbox

Patch

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 395ab4f..c8901b6 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -802,16 +802,25 @@  static int virtnet_set_mac_address(struct net_device *dev, void *p)
 	struct virtnet_info *vi = netdev_priv(dev);
 	struct virtio_device *vdev = vi->vdev;
 	int ret;
+	struct sockaddr *addr = p;
+	struct scatterlist sg;
 
-	ret = eth_mac_addr(dev, p);
-	if (ret)
-		return ret;
-
-	if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
+	if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_MAC_ADDR)) {
+		sg_init_one(&sg, addr->sa_data, dev->addr_len);
+		if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC,
+					  VIRTIO_NET_CTRL_MAC_ADDR_SET,
+					  &sg, 1, 0)) {
+			dev_warn(&vdev->dev,
+				 "Failed to set mac address by vq command.\n");
+			return -EINVAL;
+		}
+	} else if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) {
 		vdev->config->set(vdev, offsetof(struct virtio_net_config, mac),
-		                  dev->dev_addr, dev->addr_len);
+				  addr->sa_data, dev->addr_len);
+	}
+	ret = eth_mac_addr(dev, p);
 
-	return 0;
+	return ret;
 }
 
 static struct rtnl_link_stats64 *virtnet_stats(struct net_device *dev,
@@ -1627,6 +1636,7 @@  static unsigned int features[] = {
 	VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
 	VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
 	VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
+	VIRTIO_NET_F_CTRL_MAC_ADDR,
 };
 
 static struct virtio_driver virtio_net_driver = {
diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
index 848e358..a5a8c88 100644
--- a/include/uapi/linux/virtio_net.h
+++ b/include/uapi/linux/virtio_net.h
@@ -53,6 +53,7 @@ 
 					 * network */
 #define VIRTIO_NET_F_MQ	22	/* Device supports Receive Flow
 					 * Steering */
+#define VIRTIO_NET_F_CTRL_MAC_ADDR 23	/* Set MAC address */
 
 #define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
 #define VIRTIO_NET_S_ANNOUNCE	2	/* Announcement is needed */
@@ -127,7 +128,7 @@  typedef __u8 virtio_net_ctrl_ack;
  #define VIRTIO_NET_CTRL_RX_NOBCAST      5
 
 /*
- * Control the MAC filter table.
+ * Control the MAC
  *
  * The MAC filter table is managed by the hypervisor, the guest should
  * assume the size is infinite.  Filtering should be considered
@@ -140,6 +141,10 @@  typedef __u8 virtio_net_ctrl_ack;
  * first sg list contains unicast addresses, the second is for multicast.
  * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
  * is available.
+ *
+ * The ADDR_SET command requests one out scatterlist, it contains a
+ * 6 bytes MAC address. This functionality is present if the
+ * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
  */
 struct virtio_net_ctrl_mac {
 	__u32 entries;
@@ -148,6 +153,7 @@  struct virtio_net_ctrl_mac {
 
 #define VIRTIO_NET_CTRL_MAC    1
  #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
+ #define VIRTIO_NET_CTRL_MAC_ADDR_SET         1
 
 /*
  * Control VLAN filtering