| Message ID | 1355464997-19367-2-git-send-email-anilkumar@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
On Thu, Dec 13, 2012 at 10:03 PM, AnilKumar Ch <anilkumar@ti.com> wrote: > From: Colin Foe-Parker <colin.foeparker@logicpd.com> > > Add system power off control to rtc driver which is the in-charge > of controlling the BeagleBone system power. The power_off routine > can be hooked up to "pm_power_off" system call. > > System power off sequence:- > * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low > * Enable PMIC_POWER_EN in rtc module > * Set rtc ALARM2 time > * Enable ALARM2 interrupt > > Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com> > [anilkumar@ti.com: move poweroff additions to rtc driver] > Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Looks good Reviewed-by: Russ Dill <russ.dill@ti.com> Acked-by: Russ Dill <russ.dill@ti.com> > --- > Documentation/devicetree/bindings/rtc/rtc-omap.txt | 5 ++ > drivers/rtc/rtc-omap.c | 74 +++++++++++++++++++- > 2 files changed, 78 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt > index b47aa41..8d9f4f9 100644 > --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt > +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt > @@ -6,6 +6,10 @@ Required properties: > - interrupts: rtc timer, alarm interrupts in order > - interrupt-parent: phandle for the interrupt controller > > +Optional properties: > +- ti,system-power-controller: Telling whether or not rtc is controlling > + the system power. > + > Example: > > rtc@1c23000 { > @@ -14,4 +18,5 @@ rtc@1c23000 { > interrupts = <19 > 19>; > interrupt-parent = <&intc>; > + ti,system-power-controller; > }; > diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c > index 6009714..e6d4878 100644 > --- a/drivers/rtc/rtc-omap.c > +++ b/drivers/rtc/rtc-omap.c > @@ -72,6 +72,14 @@ > #define OMAP_RTC_KICK0_REG 0x6c > #define OMAP_RTC_KICK1_REG 0x70 > > +#define OMAP_RTC_ALARM2_SECONDS_REG 0x80 > +#define OMAP_RTC_ALARM2_MINUTES_REG 0x84 > +#define OMAP_RTC_ALARM2_HOURS_REG 0x88 > +#define OMAP_RTC_ALARM2_DAYS_REG 0x8c > +#define OMAP_RTC_ALARM2_MONTHS_REG 0x90 > +#define OMAP_RTC_ALARM2_YEARS_REG 0x94 > +#define OMAP_RTC_PMIC_REG 0x98 > + > /* OMAP_RTC_CTRL_REG bit fields: */ > #define OMAP_RTC_CTRL_SPLIT (1<<7) > #define OMAP_RTC_CTRL_DISABLE (1<<6) > @@ -93,15 +101,21 @@ > #define OMAP_RTC_STATUS_BUSY (1<<0) > > /* OMAP_RTC_INTERRUPTS_REG bit fields: */ > +#define OMAP_RTC_INTERRUPTS_IT_ALARM2 (1<<4) > #define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3) > #define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2) > > +/* OMAP_RTC_PMIC_REG bit fields: */ > +#define OMAP_RTC_PMIC_POWER_EN_EN (1<<16) > + > /* OMAP_RTC_KICKER values */ > #define KICK0_VALUE 0x83e70b13 > #define KICK1_VALUE 0x95a4f1e0 > > #define OMAP_RTC_HAS_KICKER 0x1 > > +#define SHUTDOWN_TIME_SEC 2 > + > static void __iomem *rtc_base; > > #define rtc_read(addr) readb(rtc_base + (addr)) > @@ -290,6 +304,56 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) > return 0; > } > > +/* > + * rtc_power_off: Set the pmic power off sequence. The RTC generates > + * pmic_pwr_enable control, which can be used to control an external > + * PMIC. > + */ > +static void rtc_power_off(void) > +{ > + u32 val; > + struct rtc_time tm; > + unsigned long time; > + > + /* Set PMIC power enable */ > + val = readl(rtc_base + OMAP_RTC_PMIC_REG); > + writel(val | OMAP_RTC_PMIC_POWER_EN_EN, rtc_base + OMAP_RTC_PMIC_REG); > + > + /* Read rtc time */ > + omap_rtc_read_time(NULL, &tm); > + > + /* Convert Gregorian date to seconds since 01-01-1970 00:00:00 */ > + rtc_tm_to_time(&tm, &time); > + > + /* Add shutdown time to the current value */ > + time += SHUTDOWN_TIME_SEC; > + > + /* Convert seconds since 01-01-1970 00:00:00 to Gregorian date */ > + rtc_time_to_tm(time, &tm); > + > + if (tm2bcd(&tm) < 0) > + return; > + > + pr_info("System will go to power_off state in approx. %d secs\n", > + SHUTDOWN_TIME_SEC); > + > + /* > + * pmic_pwr_enable is controlled by means of ALARM2 event. So here > + * programming alarm2 expiry time and enabling alarm2 interrupt > + */ > + rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG); > + rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG); > + rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG); > + rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG); > + rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG); > + rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG); > + > + /* Enable alarm2 interrupt */ > + val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG); > + writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2, > + rtc_base + OMAP_RTC_INTERRUPTS_REG); > +} > + > static struct rtc_class_ops omap_rtc_ops = { > .read_time = omap_rtc_read_time, > .set_time = omap_rtc_set_time, > @@ -327,12 +391,16 @@ static int __init omap_rtc_probe(struct platform_device *pdev) > struct resource *res, *mem; > struct rtc_device *rtc; > u8 reg, new_ctrl; > + bool pm_off = false; > const struct platform_device_id *id_entry; > const struct of_device_id *of_id; > > of_id = of_match_device(omap_rtc_of_match, &pdev->dev); > - if (of_id) > + if (of_id) { > pdev->id_entry = of_id->data; > + pm_off = of_property_read_bool(pdev->dev.of_node, > + "ti,system-power-controller"); > + } > > omap_rtc_timer = platform_get_irq(pdev, 0); > if (omap_rtc_timer <= 0) { > @@ -385,6 +453,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev) > platform_set_drvdata(pdev, rtc); > dev_set_drvdata(&rtc->dev, mem); > > + /* RTC power off */ > + if (pm_off && !pm_power_off) > + pm_power_off = rtc_power_off; > + > /* clear pending irqs, and set 1/second periodic, > * which we'll use instead of update irqs > */ > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jan 11, 2013 at 12:08 AM, Russ Dill <russ.dill@gmail.com> wrote: > On Thu, Dec 13, 2012 at 10:03 PM, AnilKumar Ch <anilkumar@ti.com> wrote: >> From: Colin Foe-Parker <colin.foeparker@logicpd.com> >> >> Add system power off control to rtc driver which is the in-charge >> of controlling the BeagleBone system power. The power_off routine >> can be hooked up to "pm_power_off" system call. >> >> System power off sequence:- >> * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low >> * Enable PMIC_POWER_EN in rtc module >> * Set rtc ALARM2 time >> * Enable ALARM2 interrupt >> >> Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com> >> [anilkumar@ti.com: move poweroff additions to rtc driver] >> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> > > Looks good > > Reviewed-by: Russ Dill <russ.dill@ti.com> > Acked-by: Russ Dill <russ.dill@ti.com> Sorry, actually, small follow up. Is there any reason this uses readl/writel in some places rather than rtc_read/rtc_write? >> --- >> Documentation/devicetree/bindings/rtc/rtc-omap.txt | 5 ++ >> drivers/rtc/rtc-omap.c | 74 +++++++++++++++++++- >> 2 files changed, 78 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt >> index b47aa41..8d9f4f9 100644 >> --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt >> +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt >> @@ -6,6 +6,10 @@ Required properties: >> - interrupts: rtc timer, alarm interrupts in order >> - interrupt-parent: phandle for the interrupt controller >> >> +Optional properties: >> +- ti,system-power-controller: Telling whether or not rtc is controlling >> + the system power. >> + >> Example: >> >> rtc@1c23000 { >> @@ -14,4 +18,5 @@ rtc@1c23000 { >> interrupts = <19 >> 19>; >> interrupt-parent = <&intc>; >> + ti,system-power-controller; >> }; >> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c >> index 6009714..e6d4878 100644 >> --- a/drivers/rtc/rtc-omap.c >> +++ b/drivers/rtc/rtc-omap.c >> @@ -72,6 +72,14 @@ >> #define OMAP_RTC_KICK0_REG 0x6c >> #define OMAP_RTC_KICK1_REG 0x70 >> >> +#define OMAP_RTC_ALARM2_SECONDS_REG 0x80 >> +#define OMAP_RTC_ALARM2_MINUTES_REG 0x84 >> +#define OMAP_RTC_ALARM2_HOURS_REG 0x88 >> +#define OMAP_RTC_ALARM2_DAYS_REG 0x8c >> +#define OMAP_RTC_ALARM2_MONTHS_REG 0x90 >> +#define OMAP_RTC_ALARM2_YEARS_REG 0x94 >> +#define OMAP_RTC_PMIC_REG 0x98 >> + >> /* OMAP_RTC_CTRL_REG bit fields: */ >> #define OMAP_RTC_CTRL_SPLIT (1<<7) >> #define OMAP_RTC_CTRL_DISABLE (1<<6) >> @@ -93,15 +101,21 @@ >> #define OMAP_RTC_STATUS_BUSY (1<<0) >> >> /* OMAP_RTC_INTERRUPTS_REG bit fields: */ >> +#define OMAP_RTC_INTERRUPTS_IT_ALARM2 (1<<4) >> #define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3) >> #define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2) >> >> +/* OMAP_RTC_PMIC_REG bit fields: */ >> +#define OMAP_RTC_PMIC_POWER_EN_EN (1<<16) >> + >> /* OMAP_RTC_KICKER values */ >> #define KICK0_VALUE 0x83e70b13 >> #define KICK1_VALUE 0x95a4f1e0 >> >> #define OMAP_RTC_HAS_KICKER 0x1 >> >> +#define SHUTDOWN_TIME_SEC 2 >> + >> static void __iomem *rtc_base; >> >> #define rtc_read(addr) readb(rtc_base + (addr)) >> @@ -290,6 +304,56 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) >> return 0; >> } >> >> +/* >> + * rtc_power_off: Set the pmic power off sequence. The RTC generates >> + * pmic_pwr_enable control, which can be used to control an external >> + * PMIC. >> + */ >> +static void rtc_power_off(void) >> +{ >> + u32 val; >> + struct rtc_time tm; >> + unsigned long time; >> + >> + /* Set PMIC power enable */ >> + val = readl(rtc_base + OMAP_RTC_PMIC_REG); >> + writel(val | OMAP_RTC_PMIC_POWER_EN_EN, rtc_base + OMAP_RTC_PMIC_REG); >> + >> + /* Read rtc time */ >> + omap_rtc_read_time(NULL, &tm); >> + >> + /* Convert Gregorian date to seconds since 01-01-1970 00:00:00 */ >> + rtc_tm_to_time(&tm, &time); >> + >> + /* Add shutdown time to the current value */ >> + time += SHUTDOWN_TIME_SEC; >> + >> + /* Convert seconds since 01-01-1970 00:00:00 to Gregorian date */ >> + rtc_time_to_tm(time, &tm); >> + >> + if (tm2bcd(&tm) < 0) >> + return; >> + >> + pr_info("System will go to power_off state in approx. %d secs\n", >> + SHUTDOWN_TIME_SEC); >> + >> + /* >> + * pmic_pwr_enable is controlled by means of ALARM2 event. So here >> + * programming alarm2 expiry time and enabling alarm2 interrupt >> + */ >> + rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG); >> + rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG); >> + rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG); >> + rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG); >> + rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG); >> + rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG); >> + >> + /* Enable alarm2 interrupt */ >> + val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG); >> + writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2, >> + rtc_base + OMAP_RTC_INTERRUPTS_REG); >> +} >> + >> static struct rtc_class_ops omap_rtc_ops = { >> .read_time = omap_rtc_read_time, >> .set_time = omap_rtc_set_time, >> @@ -327,12 +391,16 @@ static int __init omap_rtc_probe(struct platform_device *pdev) >> struct resource *res, *mem; >> struct rtc_device *rtc; >> u8 reg, new_ctrl; >> + bool pm_off = false; >> const struct platform_device_id *id_entry; >> const struct of_device_id *of_id; >> >> of_id = of_match_device(omap_rtc_of_match, &pdev->dev); >> - if (of_id) >> + if (of_id) { >> pdev->id_entry = of_id->data; >> + pm_off = of_property_read_bool(pdev->dev.of_node, >> + "ti,system-power-controller"); >> + } >> >> omap_rtc_timer = platform_get_irq(pdev, 0); >> if (omap_rtc_timer <= 0) { >> @@ -385,6 +453,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev) >> platform_set_drvdata(pdev, rtc); >> dev_set_drvdata(&rtc->dev, mem); >> >> + /* RTC power off */ >> + if (pm_off && !pm_power_off) >> + pm_power_off = rtc_power_off; >> + >> /* clear pending irqs, and set 1/second periodic, >> * which we'll use instead of update irqs >> */ >> -- >> 1.7.9.5 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jan 11, 2013 at 14:24:46, Russ Dill wrote: > On Fri, Jan 11, 2013 at 12:08 AM, Russ Dill <russ.dill@gmail.com> wrote: > > On Thu, Dec 13, 2012 at 10:03 PM, AnilKumar Ch <anilkumar@ti.com> wrote: > >> From: Colin Foe-Parker <colin.foeparker@logicpd.com> > >> > >> Add system power off control to rtc driver which is the in-charge > >> of controlling the BeagleBone system power. The power_off routine > >> can be hooked up to "pm_power_off" system call. > >> > >> System power off sequence:- > >> * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low > >> * Enable PMIC_POWER_EN in rtc module > >> * Set rtc ALARM2 time > >> * Enable ALARM2 interrupt > >> > >> Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com> > >> [anilkumar@ti.com: move poweroff additions to rtc driver] > >> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> > > > > Looks good > > > > Reviewed-by: Russ Dill <russ.dill@ti.com> > > Acked-by: Russ Dill <russ.dill@ti.com> > > Sorry, actually, small follow up. Is there any reason this uses > readl/writel in some places rather than rtc_read/rtc_write? Hi Russ Dill, Thanks for the review At OMAP_RTC_PMIC_POWER_EN_EN, 32-bit value needs to modified so readl/writel are used. While enabling the INTERRUPTS we can change it to rtc_read/rtc_write but I am not seeing any advantage if we do that apart from consistency. Thanks AnilKumar > > >> --- > >> Documentation/devicetree/bindings/rtc/rtc-omap.txt | 5 ++ > >> drivers/rtc/rtc-omap.c | 74 +++++++++++++++++++- > >> 2 files changed, 78 insertions(+), 1 deletion(-) > >> > >> diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt > >> index b47aa41..8d9f4f9 100644 > >> --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt > >> +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt > >> @@ -6,6 +6,10 @@ Required properties: > >> - interrupts: rtc timer, alarm interrupts in order > >> - interrupt-parent: phandle for the interrupt controller > >> > >> +Optional properties: > >> +- ti,system-power-controller: Telling whether or not rtc is controlling > >> + the system power. > >> + > >> Example: > >> > >> rtc@1c23000 { > >> @@ -14,4 +18,5 @@ rtc@1c23000 { > >> interrupts = <19 > >> 19>; > >> interrupt-parent = <&intc>; > >> + ti,system-power-controller; > >> }; > >> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c > >> index 6009714..e6d4878 100644 > >> --- a/drivers/rtc/rtc-omap.c > >> +++ b/drivers/rtc/rtc-omap.c > >> @@ -72,6 +72,14 @@ > >> #define OMAP_RTC_KICK0_REG 0x6c > >> #define OMAP_RTC_KICK1_REG 0x70 > >> > >> +#define OMAP_RTC_ALARM2_SECONDS_REG 0x80 > >> +#define OMAP_RTC_ALARM2_MINUTES_REG 0x84 > >> +#define OMAP_RTC_ALARM2_HOURS_REG 0x88 > >> +#define OMAP_RTC_ALARM2_DAYS_REG 0x8c > >> +#define OMAP_RTC_ALARM2_MONTHS_REG 0x90 > >> +#define OMAP_RTC_ALARM2_YEARS_REG 0x94 > >> +#define OMAP_RTC_PMIC_REG 0x98 > >> + > >> /* OMAP_RTC_CTRL_REG bit fields: */ > >> #define OMAP_RTC_CTRL_SPLIT (1<<7) > >> #define OMAP_RTC_CTRL_DISABLE (1<<6) > >> @@ -93,15 +101,21 @@ > >> #define OMAP_RTC_STATUS_BUSY (1<<0) > >> > >> /* OMAP_RTC_INTERRUPTS_REG bit fields: */ > >> +#define OMAP_RTC_INTERRUPTS_IT_ALARM2 (1<<4) > >> #define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3) > >> #define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2) > >> > >> +/* OMAP_RTC_PMIC_REG bit fields: */ > >> +#define OMAP_RTC_PMIC_POWER_EN_EN (1<<16) > >> + > >> /* OMAP_RTC_KICKER values */ > >> #define KICK0_VALUE 0x83e70b13 > >> #define KICK1_VALUE 0x95a4f1e0 > >> > >> #define OMAP_RTC_HAS_KICKER 0x1 > >> > >> +#define SHUTDOWN_TIME_SEC 2 > >> + > >> static void __iomem *rtc_base; > >> > >> #define rtc_read(addr) readb(rtc_base + (addr)) > >> @@ -290,6 +304,56 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) > >> return 0; > >> } > >> > >> +/* > >> + * rtc_power_off: Set the pmic power off sequence. The RTC generates > >> + * pmic_pwr_enable control, which can be used to control an external > >> + * PMIC. > >> + */ > >> +static void rtc_power_off(void) > >> +{ > >> + u32 val; > >> + struct rtc_time tm; > >> + unsigned long time; > >> + > >> + /* Set PMIC power enable */ > >> + val = readl(rtc_base + OMAP_RTC_PMIC_REG); > >> + writel(val | OMAP_RTC_PMIC_POWER_EN_EN, rtc_base + OMAP_RTC_PMIC_REG); > >> + > >> + /* Read rtc time */ > >> + omap_rtc_read_time(NULL, &tm); > >> + > >> + /* Convert Gregorian date to seconds since 01-01-1970 00:00:00 */ > >> + rtc_tm_to_time(&tm, &time); > >> + > >> + /* Add shutdown time to the current value */ > >> + time += SHUTDOWN_TIME_SEC; > >> + > >> + /* Convert seconds since 01-01-1970 00:00:00 to Gregorian date */ > >> + rtc_time_to_tm(time, &tm); > >> + > >> + if (tm2bcd(&tm) < 0) > >> + return; > >> + > >> + pr_info("System will go to power_off state in approx. %d secs\n", > >> + SHUTDOWN_TIME_SEC); > >> + > >> + /* > >> + * pmic_pwr_enable is controlled by means of ALARM2 event. So here > >> + * programming alarm2 expiry time and enabling alarm2 interrupt > >> + */ > >> + rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG); > >> + rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG); > >> + rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG); > >> + rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG); > >> + rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG); > >> + rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG); > >> + > >> + /* Enable alarm2 interrupt */ > >> + val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG); > >> + writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2, > >> + rtc_base + OMAP_RTC_INTERRUPTS_REG); > >> +} > >> + > >> static struct rtc_class_ops omap_rtc_ops = { > >> .read_time = omap_rtc_read_time, > >> .set_time = omap_rtc_set_time, > >> @@ -327,12 +391,16 @@ static int __init omap_rtc_probe(struct platform_device *pdev) > >> struct resource *res, *mem; > >> struct rtc_device *rtc; > >> u8 reg, new_ctrl; > >> + bool pm_off = false; > >> const struct platform_device_id *id_entry; > >> const struct of_device_id *of_id; > >> > >> of_id = of_match_device(omap_rtc_of_match, &pdev->dev); > >> - if (of_id) > >> + if (of_id) { > >> pdev->id_entry = of_id->data; > >> + pm_off = of_property_read_bool(pdev->dev.of_node, > >> + "ti,system-power-controller"); > >> + } > >> > >> omap_rtc_timer = platform_get_irq(pdev, 0); > >> if (omap_rtc_timer <= 0) { > >> @@ -385,6 +453,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev) > >> platform_set_drvdata(pdev, rtc); > >> dev_set_drvdata(&rtc->dev, mem); > >> > >> + /* RTC power off */ > >> + if (pm_off && !pm_power_off) > >> + pm_power_off = rtc_power_off; > >> + > >> /* clear pending irqs, and set 1/second periodic, > >> * which we'll use instead of update irqs > >> */ > >> -- > >> 1.7.9.5 > >> > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in > >> the body of a message to majordomo@vger.kernel.org > >> More majordomo info at http://vger.kernel.org/majordomo-info.html >
On Fri, Jan 11, 2013 at 15:00:03, AnilKumar, Chimata wrote: > On Fri, Jan 11, 2013 at 14:24:46, Russ Dill wrote: > > On Fri, Jan 11, 2013 at 12:08 AM, Russ Dill <russ.dill@gmail.com> wrote: > > > On Thu, Dec 13, 2012 at 10:03 PM, AnilKumar Ch <anilkumar@ti.com> wrote: > > >> From: Colin Foe-Parker <colin.foeparker@logicpd.com> > > >> > > >> Add system power off control to rtc driver which is the in-charge > > >> of controlling the BeagleBone system power. The power_off routine > > >> can be hooked up to "pm_power_off" system call. > > >> > > >> System power off sequence:- > > >> * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low > > >> * Enable PMIC_POWER_EN in rtc module > > >> * Set rtc ALARM2 time > > >> * Enable ALARM2 interrupt > > >> > > >> Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com> > > >> [anilkumar@ti.com: move poweroff additions to rtc driver] > > >> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> > > > > > > Looks good > > > > > > Reviewed-by: Russ Dill <russ.dill@ti.com> > > > Acked-by: Russ Dill <russ.dill@ti.com> > > > > Sorry, actually, small follow up. Is there any reason this uses > > readl/writel in some places rather than rtc_read/rtc_write? > > Hi Russ Dill, > > Thanks for the review > > At OMAP_RTC_PMIC_POWER_EN_EN, 32-bit value needs to modified so > readl/writel are used. While enabling the INTERRUPTS we can change > it to rtc_read/rtc_write but I am not seeing any advantage if we > do that apart from consistency. And driver has to clean-up properly to make use of rtc_read/write APIs with proper read/write's based on the memory type. Ideally rtc_readb/w/l and rtc_writeb/w/l should go way from the driver. This clean-up can be done while converting the driver with platform specific rtc_read/write. Thanks AnilKumar > > >> --- > > >> Documentation/devicetree/bindings/rtc/rtc-omap.txt | 5 ++ > > >> drivers/rtc/rtc-omap.c | 74 +++++++++++++++++++- > > >> 2 files changed, 78 insertions(+), 1 deletion(-) > > >> > > >> diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt > > >> index b47aa41..8d9f4f9 100644 > > >> --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt > > >> +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt > > >> @@ -6,6 +6,10 @@ Required properties: > > >> - interrupts: rtc timer, alarm interrupts in order > > >> - interrupt-parent: phandle for the interrupt controller > > >> > > >> +Optional properties: > > >> +- ti,system-power-controller: Telling whether or not rtc is controlling > > >> + the system power. > > >> + > > >> Example: > > >> > > >> rtc@1c23000 { > > >> @@ -14,4 +18,5 @@ rtc@1c23000 { > > >> interrupts = <19 > > >> 19>; > > >> interrupt-parent = <&intc>; > > >> + ti,system-power-controller; > > >> }; > > >> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c > > >> index 6009714..e6d4878 100644 > > >> --- a/drivers/rtc/rtc-omap.c > > >> +++ b/drivers/rtc/rtc-omap.c > > >> @@ -72,6 +72,14 @@ > > >> #define OMAP_RTC_KICK0_REG 0x6c > > >> #define OMAP_RTC_KICK1_REG 0x70 > > >> > > >> +#define OMAP_RTC_ALARM2_SECONDS_REG 0x80 > > >> +#define OMAP_RTC_ALARM2_MINUTES_REG 0x84 > > >> +#define OMAP_RTC_ALARM2_HOURS_REG 0x88 > > >> +#define OMAP_RTC_ALARM2_DAYS_REG 0x8c > > >> +#define OMAP_RTC_ALARM2_MONTHS_REG 0x90 > > >> +#define OMAP_RTC_ALARM2_YEARS_REG 0x94 > > >> +#define OMAP_RTC_PMIC_REG 0x98 > > >> + > > >> /* OMAP_RTC_CTRL_REG bit fields: */ > > >> #define OMAP_RTC_CTRL_SPLIT (1<<7) > > >> #define OMAP_RTC_CTRL_DISABLE (1<<6) > > >> @@ -93,15 +101,21 @@ > > >> #define OMAP_RTC_STATUS_BUSY (1<<0) > > >> > > >> /* OMAP_RTC_INTERRUPTS_REG bit fields: */ > > >> +#define OMAP_RTC_INTERRUPTS_IT_ALARM2 (1<<4) > > >> #define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3) > > >> #define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2) > > >> > > >> +/* OMAP_RTC_PMIC_REG bit fields: */ > > >> +#define OMAP_RTC_PMIC_POWER_EN_EN (1<<16) > > >> + > > >> /* OMAP_RTC_KICKER values */ > > >> #define KICK0_VALUE 0x83e70b13 > > >> #define KICK1_VALUE 0x95a4f1e0 > > >> > > >> #define OMAP_RTC_HAS_KICKER 0x1 > > >> > > >> +#define SHUTDOWN_TIME_SEC 2 > > >> + > > >> static void __iomem *rtc_base; > > >> > > >> #define rtc_read(addr) readb(rtc_base + (addr)) > > >> @@ -290,6 +304,56 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) > > >> return 0; > > >> } > > >> > > >> +/* > > >> + * rtc_power_off: Set the pmic power off sequence. The RTC generates > > >> + * pmic_pwr_enable control, which can be used to control an external > > >> + * PMIC. > > >> + */ > > >> +static void rtc_power_off(void) > > >> +{ > > >> + u32 val; > > >> + struct rtc_time tm; > > >> + unsigned long time; > > >> + > > >> + /* Set PMIC power enable */ > > >> + val = readl(rtc_base + OMAP_RTC_PMIC_REG); > > >> + writel(val | OMAP_RTC_PMIC_POWER_EN_EN, rtc_base + OMAP_RTC_PMIC_REG); > > >> + > > >> + /* Read rtc time */ > > >> + omap_rtc_read_time(NULL, &tm); > > >> + > > >> + /* Convert Gregorian date to seconds since 01-01-1970 00:00:00 */ > > >> + rtc_tm_to_time(&tm, &time); > > >> + > > >> + /* Add shutdown time to the current value */ > > >> + time += SHUTDOWN_TIME_SEC; > > >> + > > >> + /* Convert seconds since 01-01-1970 00:00:00 to Gregorian date */ > > >> + rtc_time_to_tm(time, &tm); > > >> + > > >> + if (tm2bcd(&tm) < 0) > > >> + return; > > >> + > > >> + pr_info("System will go to power_off state in approx. %d secs\n", > > >> + SHUTDOWN_TIME_SEC); > > >> + > > >> + /* > > >> + * pmic_pwr_enable is controlled by means of ALARM2 event. So here > > >> + * programming alarm2 expiry time and enabling alarm2 interrupt > > >> + */ > > >> + rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG); > > >> + rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG); > > >> + rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG); > > >> + rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG); > > >> + rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG); > > >> + rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG); > > >> + > > >> + /* Enable alarm2 interrupt */ > > >> + val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG); > > >> + writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2, > > >> + rtc_base + OMAP_RTC_INTERRUPTS_REG); > > >> +} > > >> + > > >> static struct rtc_class_ops omap_rtc_ops = { > > >> .read_time = omap_rtc_read_time, > > >> .set_time = omap_rtc_set_time, > > >> @@ -327,12 +391,16 @@ static int __init omap_rtc_probe(struct platform_device *pdev) > > >> struct resource *res, *mem; > > >> struct rtc_device *rtc; > > >> u8 reg, new_ctrl; > > >> + bool pm_off = false; > > >> const struct platform_device_id *id_entry; > > >> const struct of_device_id *of_id; > > >> > > >> of_id = of_match_device(omap_rtc_of_match, &pdev->dev); > > >> - if (of_id) > > >> + if (of_id) { > > >> pdev->id_entry = of_id->data; > > >> + pm_off = of_property_read_bool(pdev->dev.of_node, > > >> + "ti,system-power-controller"); > > >> + } > > >> > > >> omap_rtc_timer = platform_get_irq(pdev, 0); > > >> if (omap_rtc_timer <= 0) { > > >> @@ -385,6 +453,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev) > > >> platform_set_drvdata(pdev, rtc); > > >> dev_set_drvdata(&rtc->dev, mem); > > >> > > >> + /* RTC power off */ > > >> + if (pm_off && !pm_power_off) > > >> + pm_power_off = rtc_power_off; > > >> + > > >> /* clear pending irqs, and set 1/second periodic, > > >> * which we'll use instead of update irqs > > >> */ > > >> -- > > >> 1.7.9.5 > > >> > > >> -- > > >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in > > >> the body of a message to majordomo@vger.kernel.org > > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > >
diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt index b47aa41..8d9f4f9 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt @@ -6,6 +6,10 @@ Required properties: - interrupts: rtc timer, alarm interrupts in order - interrupt-parent: phandle for the interrupt controller +Optional properties: +- ti,system-power-controller: Telling whether or not rtc is controlling + the system power. + Example: rtc@1c23000 { @@ -14,4 +18,5 @@ rtc@1c23000 { interrupts = <19 19>; interrupt-parent = <&intc>; + ti,system-power-controller; }; diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 6009714..e6d4878 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -72,6 +72,14 @@ #define OMAP_RTC_KICK0_REG 0x6c #define OMAP_RTC_KICK1_REG 0x70 +#define OMAP_RTC_ALARM2_SECONDS_REG 0x80 +#define OMAP_RTC_ALARM2_MINUTES_REG 0x84 +#define OMAP_RTC_ALARM2_HOURS_REG 0x88 +#define OMAP_RTC_ALARM2_DAYS_REG 0x8c +#define OMAP_RTC_ALARM2_MONTHS_REG 0x90 +#define OMAP_RTC_ALARM2_YEARS_REG 0x94 +#define OMAP_RTC_PMIC_REG 0x98 + /* OMAP_RTC_CTRL_REG bit fields: */ #define OMAP_RTC_CTRL_SPLIT (1<<7) #define OMAP_RTC_CTRL_DISABLE (1<<6) @@ -93,15 +101,21 @@ #define OMAP_RTC_STATUS_BUSY (1<<0) /* OMAP_RTC_INTERRUPTS_REG bit fields: */ +#define OMAP_RTC_INTERRUPTS_IT_ALARM2 (1<<4) #define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3) #define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2) +/* OMAP_RTC_PMIC_REG bit fields: */ +#define OMAP_RTC_PMIC_POWER_EN_EN (1<<16) + /* OMAP_RTC_KICKER values */ #define KICK0_VALUE 0x83e70b13 #define KICK1_VALUE 0x95a4f1e0 #define OMAP_RTC_HAS_KICKER 0x1 +#define SHUTDOWN_TIME_SEC 2 + static void __iomem *rtc_base; #define rtc_read(addr) readb(rtc_base + (addr)) @@ -290,6 +304,56 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) return 0; } +/* + * rtc_power_off: Set the pmic power off sequence. The RTC generates + * pmic_pwr_enable control, which can be used to control an external + * PMIC. + */ +static void rtc_power_off(void) +{ + u32 val; + struct rtc_time tm; + unsigned long time; + + /* Set PMIC power enable */ + val = readl(rtc_base + OMAP_RTC_PMIC_REG); + writel(val | OMAP_RTC_PMIC_POWER_EN_EN, rtc_base + OMAP_RTC_PMIC_REG); + + /* Read rtc time */ + omap_rtc_read_time(NULL, &tm); + + /* Convert Gregorian date to seconds since 01-01-1970 00:00:00 */ + rtc_tm_to_time(&tm, &time); + + /* Add shutdown time to the current value */ + time += SHUTDOWN_TIME_SEC; + + /* Convert seconds since 01-01-1970 00:00:00 to Gregorian date */ + rtc_time_to_tm(time, &tm); + + if (tm2bcd(&tm) < 0) + return; + + pr_info("System will go to power_off state in approx. %d secs\n", + SHUTDOWN_TIME_SEC); + + /* + * pmic_pwr_enable is controlled by means of ALARM2 event. So here + * programming alarm2 expiry time and enabling alarm2 interrupt + */ + rtc_write(tm.tm_sec, OMAP_RTC_ALARM2_SECONDS_REG); + rtc_write(tm.tm_min, OMAP_RTC_ALARM2_MINUTES_REG); + rtc_write(tm.tm_hour, OMAP_RTC_ALARM2_HOURS_REG); + rtc_write(tm.tm_mday, OMAP_RTC_ALARM2_DAYS_REG); + rtc_write(tm.tm_mon, OMAP_RTC_ALARM2_MONTHS_REG); + rtc_write(tm.tm_year, OMAP_RTC_ALARM2_YEARS_REG); + + /* Enable alarm2 interrupt */ + val = readl(rtc_base + OMAP_RTC_INTERRUPTS_REG); + writel(val | OMAP_RTC_INTERRUPTS_IT_ALARM2, + rtc_base + OMAP_RTC_INTERRUPTS_REG); +} + static struct rtc_class_ops omap_rtc_ops = { .read_time = omap_rtc_read_time, .set_time = omap_rtc_set_time, @@ -327,12 +391,16 @@ static int __init omap_rtc_probe(struct platform_device *pdev) struct resource *res, *mem; struct rtc_device *rtc; u8 reg, new_ctrl; + bool pm_off = false; const struct platform_device_id *id_entry; const struct of_device_id *of_id; of_id = of_match_device(omap_rtc_of_match, &pdev->dev); - if (of_id) + if (of_id) { pdev->id_entry = of_id->data; + pm_off = of_property_read_bool(pdev->dev.of_node, + "ti,system-power-controller"); + } omap_rtc_timer = platform_get_irq(pdev, 0); if (omap_rtc_timer <= 0) { @@ -385,6 +453,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rtc); dev_set_drvdata(&rtc->dev, mem); + /* RTC power off */ + if (pm_off && !pm_power_off) + pm_power_off = rtc_power_off; + /* clear pending irqs, and set 1/second periodic, * which we'll use instead of update irqs */