@@ -165,13 +165,7 @@ next:
bl cpu_init_crit
#endif
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
-
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
@@ -188,14 +182,10 @@ relocate_code:
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _image_copy_end_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -245,7 +235,15 @@ fixnext:
add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
- b clear_bss
+ bx lr
+
+#endif
+
+relocate_done:
+
+ bx lr
+
+#ifndef CONFIG_SPL_BUILD
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
@@ -253,54 +251,13 @@ _rel_dyn_end_ofs:
.word __rel_dyn_end - _start
_dynsym_start_ofs:
.word __dynsym_start - _start
-#endif
-clear_bss:
-#ifdef CONFIG_SPL_BUILD
- /* No relocation for SPL */
- ldr r0, =__bss_start
- ldr r1, =__bss_end__
-#else
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
#endif
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-#ifdef CONFIG_NAND_SPL
- ldr r0, _nand_boot_ofs
- mov pc, r0
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
-_nand_boot_ofs:
- .word nand_boot
-#else
-jump_2_ram:
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
- mov pc, lr
-
-_board_init_r_ofs:
- .word board_init_r - _start
-#endif
+ bx lr
/*
*************************************************************************
@@ -224,12 +224,7 @@ skip_tcmdisable:
*/
bl lowlevel_init /* go setup pll,mux,memory */
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
@@ -246,14 +241,10 @@ relocate_code:
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -343,49 +334,9 @@ mmu_enable:
skip_hw_init:
#endif
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
-#ifndef CONFIG_NAND_SPL
- bl coloured_LED_init
- bl red_led_on
-#endif
-#endif
+relocate_done:
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-#ifdef CONFIG_NAND_SPL
- ldr pc, _nand_boot
-
-_nand_boot: .word nand_boot
-#else
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
- mov pc, lr
-
-_board_init_r_ofs:
- .word board_init_r - _start
-#endif
+ bx lr
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
@@ -399,6 +350,11 @@ _mmu_table_base:
.word mmu_table
#endif
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+ mov pc, lr
+
#ifndef CONFIG_NAND_SPL
/*
* we assume that cache operation is done before. (eg. cleanup_before_linux())
@@ -147,12 +147,7 @@ reset:
bl cpu_init_crit
#endif
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
@@ -169,14 +164,10 @@ relocate_code:
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -228,43 +219,10 @@ fixnext:
blo fixloop
#endif
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
-
- bl coloured_LED_init
- bl red_led_on
-#endif
+relocate_done:
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
mov pc, lr
-_board_init_r_ofs:
- .word board_init_r - _start
-
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
_rel_dyn_end_ofs:
@@ -272,6 +230,11 @@ _rel_dyn_end_ofs:
_dynsym_start_ofs:
.word __dynsym_start - _start
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+ mov pc, lr
+
/*
*************************************************************************
*
@@ -182,12 +182,7 @@ copyex:
bl cpu_init_crit
#endif
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
@@ -204,14 +199,10 @@ relocate_code:
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -263,51 +254,10 @@ fixnext:
blo fixloop
#endif
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
-
- bl coloured_LED_init
- bl red_led_on
-#endif
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-#ifdef CONFIG_NAND_SPL
- ldr r0, _nand_boot_ofs
- mov pc, r0
+relocate_done:
-_nand_boot_ofs:
- .word nand_boot
-#else
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
mov pc, lr
-_board_init_r_ofs:
- .word board_init_r - _start
-#endif
-
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
_rel_dyn_end_ofs:
@@ -315,6 +265,11 @@ _rel_dyn_end_ofs:
_dynsym_start_ofs:
.word __dynsym_start - _start
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+ mov pc, lr
+
/*
*************************************************************************
*
@@ -176,12 +176,7 @@ poll1:
bl cpu_init_crit
#endif
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
@@ -198,14 +193,10 @@ relocate_code:
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -257,51 +248,10 @@ fixnext:
blo fixloop
#endif
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
-
- bl coloured_LED_init
- bl red_led_on
-#endif
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-#ifdef CONFIG_NAND_SPL
- ldr r0, _nand_boot_ofs
- mov pc, r0
+relocate_done:
-_nand_boot_ofs:
- .word nand_boot
-#else
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
mov pc, lr
-_board_init_r_ofs:
- .word board_init_r - _start
-#endif
-
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
_rel_dyn_end_ofs:
@@ -309,6 +259,11 @@ _rel_dyn_end_ofs:
_dynsym_start_ofs:
.word __dynsym_start - _start
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+ mov pc, lr
+
/*
*************************************************************************
*
@@ -198,20 +198,7 @@ reset:
bl cpu_init_crit
#endif
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
-#ifdef CONFIG_NAND_SPL /* deprecated, use instead CONFIG_SPL_BUILD */
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
-#else
-#ifdef CONFIG_SPL_BUILD
- ldr sp, =(CONFIG_SPL_STACK)
-#else
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
-#endif
-#endif
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
@@ -229,15 +216,11 @@ relocate_code:
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
sub r9, r6, r0 /* r9 <- relocation offset */
cmp r0, r6
- moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ moveq r9, #0 /* no relocation. offset(r9) = 0 */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy loop */
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -289,56 +272,9 @@ fixnext:
blo fixloop
#endif
-clear_bss:
-#ifdef CONFIG_SPL_BUILD
- /* No relocation for SPL */
- ldr r0, =__bss_start
- ldr r1, =__bss_end__
-#else
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
-#endif
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
+relocate_done:
-#ifndef CONFIG_SPL_BUILD
- bl coloured_LED_init
- bl red_led_on
-#endif
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-#ifdef CONFIG_NAND_SPL
- ldr r0, _nand_boot_ofs
- mov pc, r0
-
-_nand_boot_ofs:
- .word nand_boot
-#else
- ldr r0, _board_init_r_ofs
- ldr r1, _TEXT_BASE
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
- mov pc, lr
-
-_board_init_r_ofs:
- .word board_init_r - _start
-#endif
+ bx lr
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
@@ -346,8 +282,14 @@ _rel_dyn_end_ofs:
.word __rel_dyn_end - _start
_dynsym_start_ofs:
.word __dynsym_start - _start
+
#endif
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+ bx lr
+
/*
*************************************************************************
*
@@ -147,12 +147,7 @@ reset:
bl cpu_init_crit
#endif
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
@@ -169,14 +164,10 @@ relocate_code:
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -228,46 +219,10 @@ fixnext:
blo fixloop
#endif
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
-#endif
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-#ifdef CONFIG_NAND_SPL
- ldr pc, _nand_boot
+relocate_done:
-_nand_boot: .word nand_boot
-#else
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
mov pc, lr
-_board_init_r_ofs:
- .word board_init_r - _start
-#endif
-
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
_rel_dyn_end_ofs:
@@ -275,6 +230,11 @@ _rel_dyn_end_ofs:
_dynsym_start_ofs:
.word __dynsym_start - _start
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+ mov pc, lr
+
/*
*************************************************************************
*
@@ -143,12 +143,7 @@ reset:
bl cpu_init_crit
#endif
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
@@ -165,14 +160,10 @@ relocate_code:
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -224,50 +215,9 @@ fixnext:
blo fixloop
#endif
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
-
- bl coloured_LED_init
- bl red_led_on
-#endif
+relocate_done:
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-#ifdef CONFIG_NAND_SPL
- ldr r0, _nand_boot_ofs
- mov pc, r0
-
-_nand_boot_ofs:
- .word nand_boot
-#else
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
- mov pc, lr
-
-_board_init_r_ofs:
- .word board_init_r - _start
-#endif
+ bx lr
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
@@ -276,6 +226,11 @@ _rel_dyn_end_ofs:
_dynsym_start_ofs:
.word __dynsym_start - _start
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+ mov pc, lr
+
/*
*************************************************************************
*
@@ -155,12 +155,7 @@ reset:
bl cpu_init_crit
#endif
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
@@ -177,14 +172,10 @@ ENTRY(relocate_code)
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _image_copy_end_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -233,34 +224,22 @@ fixnext:
add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
- b clear_bss
+
+relocate_done:
+
+ bx lr
+
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
_rel_dyn_end_ofs:
.word __rel_dyn_end - _start
_dynsym_start_ofs:
.word __dynsym_start - _start
+ENDPROC(relocate_code)
-clear_bss:
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
+#endif
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-jump_2_ram:
+ENTRY(c_runtime_cpu_setup)
/*
* If I-cache is enabled invalidate it
*/
@@ -279,20 +258,9 @@ jump_2_ram:
mcr p15, 0, r0, c12, c0, 0 @Set VBAR
#endif /* !Tegra20 */
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
- mov pc, lr
-
-_board_init_r_ofs:
- .word board_init_r - _start
-ENDPROC(relocate_code)
-#endif
+ bx lr
+
+ENDPROC(c_runtime_cpu_setup)
/*************************************************************************
*
@@ -245,12 +245,7 @@ reset:
orr r0,r0,#0x13
msr cpsr,r0
-/* Set initial stackpointer in SDRAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
@@ -267,14 +262,10 @@ relocate_code:
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -326,42 +317,9 @@ fixnext:
blo fixloop
#endif
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
-
- bl coloured_LED_init
- bl red_led_on
-#endif
+relocate_done:
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
- mov pc, lr
-
-_board_init_r_ofs:
- .word board_init_r - _start
+ bx lr
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
@@ -370,6 +328,11 @@ _rel_dyn_end_ofs:
_dynsym_start_ofs:
.word __dynsym_start - _start
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+ bx lr
+
/****************************************************************************/
/* */
/* Interrupt handling */
@@ -164,12 +164,7 @@ reset:
bl lock_cache_for_stack
#endif
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0, =0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
#ifndef CONFIG_SPL_BUILD
@@ -186,10 +181,6 @@ relocate_code:
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
/* Disable the Dcache RAM lock for stack now */
#ifdef CONFIG_CPU_PXA25X
bl cpu_init_crit
@@ -198,7 +189,7 @@ stack_setup:
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -250,48 +241,9 @@ fixnext:
blo fixloop
#endif
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
-#endif /* #ifndef CONFIG_SPL_BUILD */
+relocate_done:
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-#ifdef CONFIG_ONENAND_SPL
- ldr r0, _onenand_boot_ofs
- mov pc, r0
-
-_onenand_boot_ofs:
- .word onenand_boot
-#else
-jump_2_ram:
- ldr r0, _board_init_r_ofs
- ldr r1, _TEXT_BASE
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
- mov pc, lr
-
-_board_init_r_ofs:
- .word board_init_r - _start
-#endif
+ bx lr
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
@@ -299,7 +251,14 @@ _rel_dyn_end_ofs:
.word __rel_dyn_end - _start
_dynsym_start_ofs:
.word __dynsym_start - _start
+
#endif
+
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+ bx lr
+
/*
*************************************************************************
*
@@ -128,12 +128,7 @@ reset:
bl lowlevel_init
#endif
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
@@ -150,14 +145,10 @@ relocate_code:
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -209,42 +200,9 @@ fixnext:
blo fixloop
#endif
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
-
- bl coloured_LED_init
- bl red_led_on
-#endif
+relocate_done:
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
- mov pc, lr
-
-_board_init_r_ofs:
- .word board_init_r - _start
+ bx lr
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
@@ -253,6 +211,11 @@ _rel_dyn_end_ofs:
_dynsym_start_ofs:
.word __dynsym_start - _start
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+ bx lr
+
/*
*************************************************************************
*
@@ -132,12 +132,7 @@ reset:
bl cpu_init_crit
#endif
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
@@ -154,14 +149,10 @@ relocate_code:
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
adr r0, _start
cmp r0, r6
moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
+ beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
@@ -213,40 +204,10 @@ fixnext:
blo fixloop
#endif
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
-#endif
+relocate_done:
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
mov pc, lr
-_board_init_r_ofs:
- .word board_init_r - _start
-
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
_rel_dyn_end_ofs:
@@ -254,6 +215,11 @@ _rel_dyn_end_ofs:
_dynsym_start_ofs:
.word __dynsym_start - _start
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+ mov pc, lr
+
/*
*************************************************************************
*
@@ -36,6 +36,8 @@ GLSOBJS += _umodsi3.o
GLCOBJS += div0.o
+SOBJS-y += crt0.o
+
ifndef CONFIG_SPL_BUILD
COBJS-y += board.o
COBJS-y += bootm.o
@@ -272,11 +272,6 @@ void board_init_f(ulong bootflag)
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) ((CONFIG_SYS_INIT_SP_ADDR) & ~0x07);
- /* compiler optimization barrier needed for GCC >= 3.4 */
- __asm__ __volatile__("": : :"memory");
-
memset((void *)gd, 0, sizeof(gd_t));
gd->mon_len = _bss_end_ofs;
@@ -458,10 +453,6 @@ void board_init_f(ulong bootflag)
gd->fdt_blob = new_fdt;
}
memcpy(id, (void *)gd, sizeof(gd_t));
-
- relocate_code(addr_sp, id, addr);
-
- /* NOTREACHED - relocate_code() does not return */
}
#if !defined(CONFIG_SYS_NO_FLASH)
@@ -486,8 +477,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
ulong flash_size;
#endif
- gd = id;
-
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
new file mode 100644
@@ -0,0 +1,173 @@
+/*
+ * crt0 - C-runtime startup Code for ARM U-Boot
+ *
+ * Copyright (c) 2012 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm-offsets.h>
+
+/*
+ * This file handles the target-independent stages of the U-Boot
+ * start-up where a C runtime environment is needed. Its entry point
+ * is _main and is branched into from the target's start.S file.
+ *
+ * _main execution sequence is:
+ *
+ * 1. Set up initial environment for calling board_init_f().
+ * This environment only provides a stack and a place to store
+ * the GD ('global data') structure, both located in some readily
+ * available RAM (SRAM, locked cache...). In this context, VARIABLE
+ * global data, initialized or not (BSS), are UNAVAILABLE; only
+ * CONSTANT initialized data are available.
+ *
+ * 2. Call board_init_f(). This function prepares the hardware for
+ * execution from system RAM (DRAM, DDR...) As system RAM may not
+ * be available yet, , board_init_f() must use the current GD to
+ * store any data which must be passed on to later stages. These
+ * data include the relocation destination, the future stack, and
+ * the future GD location.
+ *
+ * (the following applies only to non-SPL builds)
+ *
+ * 3. Set up intermediate environment where the stack and GD are the
+ * ones allocated by board_init_f() in system RAM, but BSS and
+ * initialized non-const data are still not available.
+ *
+ * 4. Call relocate_code(). This function relocates U-Boot from its
+ * current location into the relocation destination computed by
+ * board_init_f().
+ *
+ * 5. Set up final environment for calling board_init_r(). This
+ * environment has BSS (initialized to 0), initialized non-const
+ * data (initialized to their intended value), and stack in system
+ * RAM. GD has retained values set by board_init_f(). Some CPUs
+ * have some work left to do at this point regarding memory, so
+ * call c_runtime_cpu_setup.
+ *
+ * 6. Branch to either nand_boot() or board_init_r().
+ */
+
+/*
+ * declare nand_boot() or board_init_r() to jump to at end of crt0
+ */
+
+#if defined(CONFIG_NAND_SPL)
+
+.globl nand_boot
+
+#elif ! defined(CONFIG_SPL_BUILD)
+
+.globl board_init_r
+
+#endif
+
+/*
+ * start and end of BSS
+ */
+
+.globl __bss_start
+.globl __bss_end__
+
+/*
+ * entry point of crt0 sequence
+ */
+
+.global _main
+
+_main:
+
+/*
+ * Set up initial C runtime environment and call board_init_f(0).
+ */
+
+#if defined(CONFIG_NAND_SPL)
+ /* deprecated, use instead CONFIG_SPL_BUILD */
+ ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
+ ldr sp, =(CONFIG_SPL_STACK)
+#else
+ ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+#endif
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
+ sub sp, #GD_SIZE /* allocate one GD above SP */
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
+ mov r8, sp /* GD is above SP */
+ mov r0, #0
+ bl board_init_f
+
+#if ! defined(CONFIG_SPL_BUILD)
+
+/*
+ * Set up intermediate environment (new sp and gd) and call
+ * relocate_code(addr_sp, gd, addr_moni). Trick here is that
+ * we'll return 'here' but relocated.
+ */
+
+ ldr sp, [r8, #GD_START_ADDR_SP] /* r8 = gd->start_addr_sp */
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
+ ldr r8, [r8, #GD_BD] /* r8 = gd->bd */
+ sub r8, r8, #GD_SIZE /* new GD is below bd */
+
+ adr lr, here
+ ldr r0, [r8, #GD_RELOC_OFF] /* lr = gd->start_addr_sp */
+ add lr, lr, r0
+ ldr r0, [r8, #GD_START_ADDR_SP] /* r0 = gd->start_addr_sp */
+ mov r1, r8 /* r1 = gd */
+ ldr r2, [r8, #GD_RELOCADDR] /* r2 = gd->relocaddr */
+ b relocate_code
+here:
+
+/* Set up final (full) environment */
+
+ bl c_runtime_cpu_setup /* we still call old routine here */
+
+ ldr r0, =__bss_start /* this is auto-relocated! */
+ ldr r1, =__bss_end__ /* this is auto-relocated! */
+
+ mov r2, #0x00000000 /* prepare zero to clear BSS */
+
+clbss_l:cmp r0, r1 /* while not at end of BSS */
+ strlo r2, [r0] /* clear 32-bit BSS word */
+ addlo r0, r0, #4 /* move to next */
+ blo clbss_l
+
+ bl coloured_LED_init
+ bl red_led_on
+
+#if defined(CONFIG_NAND_SPL)
+
+ /* call _nand_boot() */
+ ldr pc, =nand_boot
+
+#else
+
+ /* call board_init_r(gd_t *id, ulong dest_addr) */
+ mov r0, r8 /* gd_t */
+ ldr r1, [r8, #GD_RELOCADDR] /* dest_addr */
+ /* call board_init_r */
+ ldr pc, =board_init_r /* this is auto-relocated! */
+
+#endif
+
+ /* we should not return here. */
+
+#endif
@@ -300,7 +300,7 @@ int abortboot(int bootdelay);
extern char console_buffer[];
/* arch/$(ARCH)/lib/board.c */
-void board_init_f (ulong) __attribute__ ((noreturn));
+void board_init_f(ulong);
void board_init_r (gd_t *, ulong) __attribute__ ((noreturn));
int checkboard (void);
int checkflash (void);
@@ -65,7 +65,7 @@
#define CONFIG_SYS_BOOTMAPSZ ((256*1024*1024) - (4*1024))
#define CONFIG_SPL_RAM_DEVICE
-#define CONFIG_SPL_STACK (&__stack_start)
+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SYS_SPL_MALLOC_START ((unsigned long) (&__malloc_start))
#define CONFIG_SYS_SPL_MALLOC_SIZE (&__malloc_end - &__malloc_start)
@@ -28,5 +28,15 @@ int main(void)
DEFINE(GENERATED_BD_INFO_SIZE,
(sizeof(struct bd_info) + 15) & ~15);
+ DEFINE(GD_SIZE, sizeof(struct global_data));
+
+ DEFINE(GD_BD, offsetof(struct global_data, bd));
+
+ DEFINE(GD_RELOCADDR, offsetof(struct global_data, relocaddr));
+
+ DEFINE(GD_RELOC_OFF, offsetof(struct global_data, reloc_off));
+
+ DEFINE(GD_START_ADDR_SP, offsetof(struct global_data, start_addr_sp));
+
return 0;
}
@@ -12,11 +12,12 @@ LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-SOBJS = start.o lowlevel_init.o
+SOBJS = start.o crt0.o lowlevel_init.o
COBJS = nand_boot_fsl_nfc.o
SRCS := $(SRCTREE)/nand_spl/nand_boot_fsl_nfc.c
SRCS += $(SRCTREE)/arch/arm/cpu/arm1136/start.S
+SRCS += $(SRCTREE)/arch/arm/lib/crt0.S
SRCS += $(SRCTREE)/board/freescale/mx31pdk/lowlevel_init.S
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
__OBJS := $(SOBJS) $(COBJS)
@@ -49,6 +50,9 @@ $(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
$(obj)%.o: $(SRCTREE)/arch/arm/cpu/arm1136/%.S
$(CC) $(AFLAGS) -c -o $@ $<
+$(obj)%.o: $(SRCTREE)/arch/arm/lib/%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
$(obj)%.o: $(SRCTREE)/board/freescale/mx31pdk/%.S
$(CC) $(AFLAGS) -c -o $@ $<
@@ -33,11 +33,12 @@ LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-SOBJS = start.o lowlevel_init.o
+SOBJS = start.o crt0.o lowlevel_init.o
COBJS = nand_boot_fsl_nfc.o
SRCS := $(SRCTREE)/nand_spl/nand_boot_fsl_nfc.c
SRCS += $(SRCTREE)/arch/arm/cpu/arm926ejs/start.S
+SRCS += $(SRCTREE)/arch/arm/lib/crt0.S
SRCS += $(SRCTREE)/board/karo/tx25/lowlevel_init.S
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
__OBJS := $(SOBJS) $(COBJS)
@@ -70,6 +71,9 @@ $(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
$(obj)%.o: $(SRCTREE)/arch/arm/cpu/arm926ejs/%.S
$(CC) $(AFLAGS) -c -o $@ $<
+$(obj)%.o: $(SRCTREE)/arch/arm/lib/%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
$(obj)%.o: $(SRCTREE)/board/karo/tx25/%.S
$(CC) $(AFLAGS) -c -o $@ $<
Move all the C runtime setup code from every start.S in arch/arm into arch/arm/lib/crt0.S. This covers the code sequence from setting up the initial stack to calling into board_init_r(). Also, rewrite the C runtime setup and make functions board_init_*() and relocate_code() behave according to normal C semantics (no jumping across the C stack any more, etc). Some SPL targets had to be touched because they use start.S explicitly or for some reason; the relevant maintainers and custodians are cc:ed. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> --- Changes in v4: - fixed bhs into blo in BSS init loop - switched from explicit literals to '=target' notation - fixed location of GD in initial environment - stopped SPL boot sequence at calling board_init_f Changes in v3: - various clarifications and typo fixes - fixed wrong LED calls conditional - fixed open comment eating some code - fixed code overrun in SPL case Changes in v2: - moved description from cover letter to patch commit msg - added note about tests in the cover letter - fixed baords with CONFIG_SPL but not CONFIG_SPL_STACK arch/arm/cpu/arm1136/start.S | 71 +++--------- arch/arm/cpu/arm1176/start.S | 62 ++--------- arch/arm/cpu/arm720t/start.S | 53 ++------- arch/arm/cpu/arm920t/start.S | 61 ++-------- arch/arm/cpu/arm925t/start.S | 61 ++-------- arch/arm/cpu/arm926ejs/start.S | 80 ++----------- arch/arm/cpu/arm946es/start.S | 56 ++-------- arch/arm/cpu/arm_intcm/start.S | 63 ++--------- arch/arm/cpu/armv7/start.S | 58 +++------- arch/arm/cpu/ixp/start.S | 55 ++------- arch/arm/cpu/pxa/start.S | 63 ++--------- arch/arm/cpu/s3c44b0/start.S | 55 ++------- arch/arm/cpu/sa1100/start.S | 50 ++------- arch/arm/lib/Makefile | 2 + arch/arm/lib/board.c | 11 -- arch/arm/lib/crt0.S | 173 +++++++++++++++++++++++++++++ include/common.h | 2 +- include/configs/socfpga_cyclone5.h | 2 +- lib/asm-offsets.c | 10 ++ nand_spl/board/freescale/mx31pdk/Makefile | 6 +- nand_spl/board/karo/tx25/Makefile | 6 +- 21 files changed, 322 insertions(+), 678 deletions(-) create mode 100644 arch/arm/lib/crt0.S