diff mbox

linux-user: Add Alpha socket constants

Message ID 1357178795-2392-1-git-send-email-dillona@dillona.com
State New
Headers show

Commit Message

dillona@dillona.com Jan. 3, 2013, 2:06 a.m. UTC 
From: Dillon Amburgey <dillona@dillona.com>

Without these, some networking programs will not work

Signed-off-by: Dillon Amburgey <dillona@dillona.com>
---
 linux-user/socket.h |   69 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 69 insertions(+), 0 deletions(-)

Comments

Richard Henderson Jan. 4, 2013, 7:05 p.m. UTC | #1 
On 01/02/2013 06:06 PM, dillona@dillona.com wrote:
> From: Dillon Amburgey <dillona@dillona.com>
> 
> Without these, some networking programs will not work
> 
> Signed-off-by: Dillon Amburgey <dillona@dillona.com>
> ---
>  linux-user/socket.h |   69 +++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 69 insertions(+), 0 deletions(-)

Reviewed-by: Richard Henderson <rth@twiddle.net>


r~
diff mbox

Patch

diff --git a/linux-user/socket.h b/linux-user/socket.h
index 93d4782..339cae5 100644
--- a/linux-user/socket.h
+++ b/linux-user/socket.h
@@ -87,6 +87,75 @@ 
 
 	#define TARGET_SOCK_MAX (SOCK_PACKET + 1)
 
+#elif defined(TARGET_ALPHA)
+
+    /* For setsockopt(2) */
+    #define TARGET_SOL_SOCKET   0xffff
+
+    #define TARGET_SO_DEBUG 0x0001
+    #define TARGET_SO_REUSEADDR 0x0004
+    #define TARGET_SO_KEEPALIVE 0x0008
+    #define TARGET_SO_DONTROUTE 0x0010
+    #define TARGET_SO_BROADCAST 0x0020
+    #define TARGET_SO_LINGER    0x0080
+    #define TARGET_SO_OOBINLINE 0x0100
+    /* To add :#define TARGET_SO_REUSEPORT 0x0200 */
+
+    #define TARGET_SO_TYPE      0x1008
+    #define TARGET_SO_ERROR 0x1007
+    #define TARGET_SO_SNDBUF    0x1001
+    #define TARGET_SO_RCVBUF    0x1002
+    #define TARGET_SO_SNDBUFFORCE   0x100a
+    #define TARGET_SO_RCVBUFFORCE   0x100b
+    #define TARGET_SO_RCVLOWAT  0x1010
+    #define TARGET_SO_SNDLOWAT  0x1011
+    #define TARGET_SO_RCVTIMEO  0x1012
+    #define TARGET_SO_SNDTIMEO  0x1013
+    #define TARGET_SO_ACCEPTCONN    0x1014
+    #define TARGET_SO_PROTOCOL  0x1028
+    #define TARGET_SO_DOMAIN    0x1029
+
+    /* linux-specific, might as well be the same as on i386 */
+    #define TARGET_SO_NO_CHECK  11
+    #define TARGET_SO_PRIORITY  12
+    #define TARGET_SO_BSDCOMPAT 14
+
+    #define TARGET_SO_PASSCRED  17
+    #define TARGET_SO_PEERCRED  18
+    #define TARGET_SO_BINDTODEVICE 25
+
+    /* Socket filtering */
+    #define TARGET_SO_ATTACH_FILTER        26
+    #define TARGET_SO_DETACH_FILTER        27
+
+    #define TARGET_SO_PEERNAME      28
+    #define TARGET_SO_TIMESTAMP     29
+    #define TARGET_SCM_TIMESTAMP        TARGET_SO_TIMESTAMP
+
+    #define TARGET_SO_PEERSEC       30
+    #define TARGET_SO_PASSSEC       34
+    #define TARGET_SO_TIMESTAMPNS       35
+    #define TARGET_SCM_TIMESTAMPNS      TARGET_SO_TIMESTAMPNS
+
+    /* Security levels - as per NRL IPv6 - don't actually do anything */
+    #define TARGET_SO_SECURITY_AUTHENTICATION       19
+    #define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT 20
+    #define TARGET_SO_SECURITY_ENCRYPTION_NETWORK       21
+
+    #define TARGET_SO_MARK          36
+
+    #define TARGET_SO_TIMESTAMPING      37
+    #define TARGET_SCM_TIMESTAMPING TARGET_SO_TIMESTAMPING
+
+    #define TARGET_SO_RXQ_OVFL             40
+
+    #define TARGET_SO_WIFI_STATUS       41
+    #define TARGET_SCM_WIFI_STATUS      TARGET_SO_WIFI_STATUS
+    #define TARGET_SO_PEEK_OFF      42
+
+    /* Instruct lower device to use last 4-bytes of skb data as FCS */
+    #define TARGET_SO_NOFCS     43
+
 #else
 
 	/* For setsockopt(2) */