Message ID | 50C7148E.4020804@samsung.com |
---|---|
State | Accepted |
Delegated to: | Albert ARIBAUD |
Headers | show |
On 12/11/2012 04:10 AM, Minkyu Kang wrote: > Dear Albert, > > The following changes since commit fd4d564b3c80b111f18c93adb14233a6a7ddb0e9: > > Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07 08:47:59 -0700) > > are available in the git repository at: > > > git://git.denx.de/u-boot-samsung resolve > > for you to fetch changes up to fbef8e6e7f1233ed20f8c5045e12c9cf31b43540: > > universal_c210: check the NULL pointer when get the PMIC (2012-12-11 17:37:28 +0900) How come this includes a bunch of Tegra changes; did you just use the wrong base commit when generating the commit list below? > Simon Glass (17): > tegra: Use const for pinmux_config_pingroup/table() > tegra: Add display support to funcmux > tegra: fdt: Add pwm binding and node > tegra: fdt: Add LCD definitions for Tegra > tegra: Add support for PWM > tegra: Add LCD driver > tegra: Add LCD support to Nvidia boards > arm: Add control over cachability of memory regions > lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment > lcd: Add support for flushing LCD fb from dcache after update > tegra: Align LCD frame buffer to section boundary > tegra: Support control of cache settings for LCD > tegra: fdt: Add LCD definitions for Seaboard > lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console > tegra: Remove unnecessary CONFIG_SYS_NAND_BASE > tegra: config: seaboard: Move tegra-common-post to correct place > Stephen Warren (4): > ARM: tegra: TrimSlice: add support for USB1 port > mmc: tegra: support 4-bit operation too on 8-bit slots > ARM: tegra: enable 8-bit SD slots in board files > tegra: use generic fs commands in BOOTCOMMAND > Wei Ni (1): > tegra: Add SOC support for display/lcd
Hi Minkyu, On Tue, 11 Dec 2012 20:10:06 +0900, Minkyu Kang <mk7.kang@samsung.com> wrote: > Dear Albert, > > The following changes since commit fd4d564b3c80b111f18c93adb14233a6a7ddb0e9: > > Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07 08:47:59 -0700) > > are available in the git repository at: > > > git://git.denx.de/u-boot-samsung resolve > > for you to fetch changes up to fbef8e6e7f1233ed20f8c5045e12c9cf31b43540: > > universal_c210: check the NULL pointer when get the PMIC (2012-12-11 17:37:28 +0900) > > ---------------------------------------------------------------- > Albert ARIBAUD (1): > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > > Allen Martin (1): > tegra: add CONSOLE_MUX support to tegra-kbc > > Ashok Kumar Reddy (1): > ARM: arm1176: Define arch_cpu_init() for s3c64xx > > Benoît Thébaudeau (17): > arm1136: Fix enable_caches() > mx31: Move EHCI definitions to ehci-fsl.h > ehci-mxc: Clean up > ehci-mx5: Clean up > ehci-mx5: Fix OC_DIS usage > ehci-mx5: Fix OPM usage > ehci-mx5: Fix *PM usage for i.MX53 > ehci-mx5: Add missing OC_DIS for i.MX53 > ehci-mxc: Make EHCI power/oc polarities configurable > ehci-mxc: Make i.MX25 EHCI configurable > ehci-mxc: Define host offsets > ehci-mxc: Add support for i.MX35 > mx35pdk: Add support for OTG > ehci-mx5/6: Make board_ehci_hcd_init() optional > ehci-mxc: Fix host power mask bit for i.MX35 > ehci-mxc: Fix host power mask bit for i.MX25 > mx5: Mark lowlevel_init board-specific code > > Chander Kashyap (1): > Exynos5250: Enable PXE Support > > Fabio Estevam (24): > mx25pdk: Include CONFIG_MX25 > mx25pdk: Add esdhc support > pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH > mx25: Place common functions into sys_proto.h > pmic: Add support for mc34704 > mx25pdk: Add Ethernet support > mx53loco: Allow booting a zImage kernel > mx25pdk: Allow booting a zImage kernel > mx51evk: Allow booting a zImage kernel > mx35pdk: Allow booting a zImage kernel > mx6qsabre_common: Allow booting a zImage kernel > mx5: Align SPI CS naming with i.MX53 reference manual > mx5: Print CSPI clock in 'clock' command > spi: mxc_spi: Fix handling of chip select > spi: mxc_spi: Fix spi clock glitch durant reset > mx6: clock: Only show CSPI clock if CSPI is enabled > mx28evk: Configure CONFIG_BOOTDELAY to one second > mx53loco: Configure CONFIG_BOOTDELAY to one second > mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second > mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second > mx51evk: Configure CONFIG_BOOTDELAY to one second > mx25pdk: Configure CONFIG_BOOTDELAY to one second > mx31pdk: Configure CONFIG_BOOTDELAY to one second > mx35pdk: Configure CONFIG_BOOTDELAY to one second > > Hatim RV (3): > EXYNOS: Add clock for SPI > EXYNOS5: Add base address for SPI > EXYNOS5: Enable SPI > > Marek Vasut (3): > dm: wdt: Move s5p watchdog timer to drivers/watchdog/ > mx28: Fix typo in POWER_MINPWR_VBG_OFF > mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET > > Mayuresh Kulkarni (1): > tegra: Enable display/lcd support on Seaboard > > Minkyu Kang (6): > ARCH: EXYNOS: add support to match product id > EXYNOS: Clock: Add common function for pll rate calculation > s3c64xx: fix the compiler error and warning > Merge branch 'master' of git://git.denx.de/u-boot into resolve > universal_c210: fix compiler error and compiler warning > universal_c210: check the NULL pointer when get the PMIC > > Piotr Wilczek (12): > arm:exynos4:trats: Correct SDRAM configuration for trats > arm:exynos4:trats: Fix SDRAM size > arm:exynos4:pinmux: Modify the gpio function for mmc > arm:exynos4:trats: Use pinmux for mmc configuration > arm:exynos4:universal: Use pinmux for mmc configuration > arm:exynos4:universal: Eliminated low level init > arm: trats: Power down core 1 > exynos4: universal_C210: use software SPI > misc:max8998 Add LDO macros > drivers: video: Add ld9040 video driver > drivers: video: fix image position > exynos4: universal_C210: add display support > > Rajeshwari Shinde (16): > PMIC: MAX77686: Add support for MAX77686 > SMDK5250: Config: Enable MAX77686 pmic chip > SOUND: SAMSUNG: Add I2S driver > SOUND: Add WM8994 codec > Sound: Add command for audio playback > EXYNOS: Add I2S registers > EXYNOS: Add parameters required by I2S > EXYNOS: Add pinmux for I2S > EXYNOS: Add I2S base address > EXYNOS: Add clock for I2S > SMDK5250: Enable Sound > EXYNOS5: Add pinmux support for SPI > SPI: Add SPI Driver for EXYNOS. > EXYNOS5: Enable SPI booting. > POWER: MAX77686: Modified as per the latest Implementation > SMDK5250: Enable pmic MAX77686 > > Simon Glass (17): > pxa: Disable dcache on palmld, palmtc, zipitz2 > tegra: Use const for pinmux_config_pingroup/table() > tegra: Add display support to funcmux > tegra: fdt: Add pwm binding and node > tegra: fdt: Add LCD definitions for Tegra > tegra: Add support for PWM > tegra: Add LCD driver > tegra: Add LCD support to Nvidia boards > arm: Add control over cachability of memory regions > lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment > lcd: Add support for flushing LCD fb from dcache after update > tegra: Align LCD frame buffer to section boundary > tegra: Support control of cache settings for LCD > tegra: fdt: Add LCD definitions for Seaboard > lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console > tegra: Remove unnecessary CONFIG_SYS_NAND_BASE > tegra: config: seaboard: Move tegra-common-post to correct place > > Stefano Babic (8): > ARM: Fix start.S when used with SPL in arm1136 > MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK > MX35: Add soc_boot_mode and soc_boot_device to MX35 > SPL: Added SPL target for mx35 SOC to SPL Makefile > ARM: Add SPL target to arm1136 > MX35: add support for woodburn board > MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk > Merge git://git.denx.de/u-boot > > Stephen Warren (4): > ARM: tegra: TrimSlice: add support for USB1 port > mmc: tegra: support 4-bit operation too on 8-bit slots > ARM: tegra: enable 8-bit SD slots in board files > tegra: use generic fs commands in BOOTCOMMAND > > Troy Kisky (4): > mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite > mx6: use CONFIG_MX6 instead of CONFIG_MX6Q > imx-common: cpu: add imx_ddr_size > arch-mx6: add mx6dl_pins.h > > Wei Ni (1): > tegra: Add SOC support for display/lcd > > Łukasz Majewski (1): > gpio:fix: Proper handling of GPIO subsystem parts at Samsung devices > > MAINTAINERS | 1 + > Makefile | 2 + > arch/arm/cpu/arm1136/config.mk | 3 + > arch/arm/cpu/arm1136/cpu.c | 22 +- > arch/arm/cpu/arm1136/mx35/Makefile | 1 + > arch/arm/cpu/arm1136/mx35/generic.c | 75 ++ > arch/arm/cpu/arm1136/mx35/mx35_sdram.c | 137 ++++ > arch/arm/cpu/arm1136/start.S | 31 +- > arch/arm/cpu/arm1136/u-boot-spl.lds | 62 ++ > arch/arm/cpu/arm1176/s3c64xx/Makefile | 2 +- > arch/arm/cpu/arm1176/s3c64xx/init.c | 26 + > arch/arm/cpu/armv7/cache_v7.c | 11 + > arch/arm/cpu/armv7/exynos/clock.c | 350 +++++++-- > arch/arm/cpu/armv7/exynos/pinmux.c | 122 +++ > arch/arm/cpu/armv7/mx5/clock.c | 4 +- > arch/arm/cpu/armv7/mx5/lowlevel_init.S | 2 +- > arch/arm/cpu/armv7/mx6/clock.c | 2 + > arch/arm/cpu/armv7/mx6/soc.c | 32 +- > arch/arm/cpu/armv7/s5p-common/Makefile | 1 - > arch/arm/cpu/armv7/tegra20/Makefile | 2 + > arch/arm/cpu/armv7/tegra20/display.c | 409 ++++++++++ > arch/arm/cpu/armv7/tegra20/pwm.c | 101 +++ > arch/arm/cpu/tegra20-common/funcmux.c | 37 + > arch/arm/cpu/tegra20-common/pinmux.c | 4 +- > arch/arm/dts/tegra20.dtsi | 105 +++ > arch/arm/imx-common/cpu.c | 66 +- > arch/arm/include/asm/arch-exynos/clk.h | 4 + > arch/arm/include/asm/arch-exynos/clock.h | 29 + > arch/arm/include/asm/arch-exynos/cpu.h | 18 + > arch/arm/include/asm/arch-exynos/gpio.h | 19 + > arch/arm/include/asm/arch-exynos/i2s-regs.h | 66 ++ > arch/arm/include/asm/arch-exynos/periph.h | 7 + > arch/arm/include/asm/arch-exynos/sound.h | 44 ++ > arch/arm/include/asm/arch-exynos/spi.h | 78 ++ > arch/arm/include/asm/arch-mx25/imx-regs.h | 5 +- > arch/arm/include/asm/arch-mx25/sys_proto.h | 3 + > arch/arm/include/asm/arch-mx31/imx-regs.h | 27 +- > arch/arm/include/asm/arch-mx35/imx-regs.h | 4 + > arch/arm/include/asm/arch-mx35/mmc_host_def.h | 31 + > arch/arm/include/asm/arch-mx35/spl.h | 38 + > arch/arm/include/asm/arch-mx35/sys_proto.h | 2 + > arch/arm/include/asm/arch-mx5/mx5x_pins.h | 6 +- > arch/arm/include/asm/arch-mx5/sys_proto.h | 10 +- > arch/arm/include/asm/arch-mx6/imx-regs.h | 2 + > arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 149 ++++ > arch/arm/include/asm/arch-mx6/sys_proto.h | 10 +- > arch/arm/include/asm/arch-mxs/regs-power.h | 4 +- > arch/arm/include/asm/arch-s5pc1xx/gpio.h | 7 +- > arch/arm/include/asm/arch-tegra20/dc.h | 545 ++++++++++++++ > arch/arm/include/asm/arch-tegra20/display.h | 152 ++++ > arch/arm/include/asm/arch-tegra20/pinmux.h | 4 +- > arch/arm/include/asm/arch-tegra20/pwm.h | 75 ++ > arch/arm/include/asm/system.h | 31 + > arch/arm/lib/cache-cp15.c | 51 +- > board/compal/paz00/paz00.c | 5 +- > board/compulab/dts/tegra20-trimslice.dts | 3 +- > board/compulab/trimslice/trimslice.c | 8 + > board/freescale/mx25pdk/mx25pdk.c | 114 +++ > board/freescale/mx31ads/u-boot.lds | 2 + > board/freescale/mx35pdk/lowlevel_init.S | 4 + > board/freescale/mx35pdk/mx35pdk.c | 21 + > board/nvidia/common/board.c | 24 + > board/nvidia/dts/tegra20-seaboard.dts | 33 + > board/nvidia/harmony/harmony.c | 5 +- > board/nvidia/seaboard/seaboard.c | 5 +- > board/samsung/smdk5250/Makefile | 2 +- > board/samsung/smdk5250/smdk5250.c | 15 + > board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} | 31 +- > board/samsung/trats/trats.c | 80 +- > board/samsung/universal_c210/Makefile | 1 - > board/samsung/universal_c210/lowlevel_init.S | 395 ---------- > board/samsung/universal_c210/universal.c | 337 +++++++-- > board/syteco/zmx25/zmx25.c | 1 + > board/woodburn/Makefile | 43 ++ > board/woodburn/imximage.cfg | 4 + > board/woodburn/lowlevel_init.S | 38 + > board/woodburn/woodburn.c | 261 +++++++ > boards.cfg | 2 + > common/Makefile | 1 + > common/cmd_sound.c | 96 +++ > common/lcd.c | 89 ++- > common/main.c | 12 +- > doc/README.imx5 | 5 + > doc/device-tree-bindings/pwm/tegra20-pwm.txt | 18 + > doc/device-tree-bindings/video/displaymode.txt | 42 ++ > doc/device-tree-bindings/video/tegra20-dc.txt | 85 +++ > drivers/gpio/mxc_gpio.c | 6 +- > drivers/gpio/s5p_gpio.c | 6 +- > drivers/input/tegra-kbc.c | 18 +- > drivers/mmc/tegra_mmc.c | 7 +- > drivers/power/pmic/Makefile | 1 + > drivers/power/pmic/pmic_max77686.c | 48 ++ > drivers/power/power_fsl.c | 8 +- > drivers/serial/s3c64xx.c | 3 +- > drivers/sound/Makefile | 48 ++ > drivers/sound/samsung-i2s.c | 358 +++++++++ > drivers/sound/sound.c | 228 ++++++ > drivers/sound/wm8994.c | 792 ++++++++++++++++++++ > drivers/sound/wm8994.h | 87 +++ > drivers/sound/wm8994_registers.h | 299 ++++++++ > drivers/spi/Makefile | 1 + > drivers/spi/exynos_spi.c | 367 +++++++++ > drivers/spi/mxc_spi.c | 9 +- > drivers/usb/host/ehci-mx5.c | 146 +++- > drivers/usb/host/ehci-mx6.c | 5 + > drivers/usb/host/ehci-mxc.c | 225 ++++-- > drivers/video/Makefile | 2 + > drivers/video/exynos_fb.c | 15 +- > drivers/video/ipu_regs.h | 2 +- > drivers/video/ld9040.c | 144 ++++ > drivers/video/tegra.c | 379 ++++++++++ > drivers/watchdog/Makefile | 1 + > .../s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c | 0 > include/configs/harmony.h | 4 +- > include/configs/mx25pdk.h | 42 +- > include/configs/mx28evk.h | 2 +- > include/configs/mx31pdk.h | 2 +- > include/configs/mx35pdk.h | 18 +- > include/configs/mx51_efikamx.h | 1 + > include/configs/mx51evk.h | 5 +- > include/configs/mx53evk.h | 1 + > include/configs/mx53loco.h | 4 +- > include/configs/mx6qarm2.h | 1 + > include/configs/mx6qsabre_common.h | 4 +- > include/configs/mx6qsabrelite.h | 3 +- > include/configs/palmld.h | 3 + > include/configs/palmtc.h | 3 + > include/configs/paz00.h | 3 + > include/configs/s5pc210_universal.h | 36 + > include/configs/seaboard.h | 21 +- > include/configs/smdk5250.h | 48 +- > include/configs/tec.h | 1 - > include/configs/tegra-common-post.h | 39 +- > include/configs/tegra20-common.h | 3 + > include/configs/trats.h | 17 +- > include/configs/trimslice.h | 4 + > include/configs/ventana.h | 3 + > include/configs/vision2.h | 1 + > include/configs/whistler.h | 3 + > include/configs/woodburn.h | 34 + > include/configs/woodburn_common.h | 313 ++++++++ > include/configs/woodburn_sd.h | 60 ++ > include/configs/zipitz2.h | 3 + > include/configs/zmx25.h | 6 +- > include/fdtdec.h | 2 + > include/i2s.h | 127 ++++ > include/lcd.h | 11 + > include/ld9040.h | 32 + > include/mc34704.h | 49 ++ > include/power/max77686_pmic.h | 158 ++++ > include/power/max8998_pmic.h | 2 + > include/sound.h | 62 ++ > include/usb/ehci-fsl.h | 28 +- > lib/fdtdec.c | 2 + > nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 + > spl/Makefile | 6 + > 156 files changed, 8322 insertions(+), 865 deletions(-) > create mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c > create mode 100644 arch/arm/cpu/arm1136/u-boot-spl.lds > create mode 100644 arch/arm/cpu/arm1176/s3c64xx/init.c > create mode 100644 arch/arm/cpu/armv7/tegra20/display.c > create mode 100644 arch/arm/cpu/armv7/tegra20/pwm.c > create mode 100644 arch/arm/include/asm/arch-exynos/i2s-regs.h > create mode 100644 arch/arm/include/asm/arch-exynos/sound.h > create mode 100644 arch/arm/include/asm/arch-exynos/spi.h > create mode 100644 arch/arm/include/asm/arch-mx35/mmc_host_def.h > create mode 100644 arch/arm/include/asm/arch-mx35/spl.h > create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl_pins.h > create mode 100644 arch/arm/include/asm/arch-tegra20/dc.h > create mode 100644 arch/arm/include/asm/arch-tegra20/display.h > create mode 100644 arch/arm/include/asm/arch-tegra20/pwm.h > rename board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} (66%) > delete mode 100644 board/samsung/universal_c210/lowlevel_init.S > create mode 100644 board/woodburn/Makefile > create mode 100644 board/woodburn/imximage.cfg > create mode 100644 board/woodburn/lowlevel_init.S > create mode 100644 board/woodburn/woodburn.c > create mode 100644 common/cmd_sound.c > create mode 100644 doc/device-tree-bindings/pwm/tegra20-pwm.txt > create mode 100644 doc/device-tree-bindings/video/displaymode.txt > create mode 100644 doc/device-tree-bindings/video/tegra20-dc.txt > create mode 100644 drivers/power/pmic/pmic_max77686.c > create mode 100644 drivers/sound/Makefile > create mode 100644 drivers/sound/samsung-i2s.c > create mode 100644 drivers/sound/sound.c > create mode 100644 drivers/sound/wm8994.c > create mode 100644 drivers/sound/wm8994.h > create mode 100644 drivers/sound/wm8994_registers.h > create mode 100644 drivers/spi/exynos_spi.c > create mode 100644 drivers/video/ld9040.c > create mode 100644 drivers/video/tegra.c > rename arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c (100%) > create mode 100644 include/configs/woodburn.h > create mode 100644 include/configs/woodburn_common.h > create mode 100644 include/configs/woodburn_sd.h > create mode 100644 include/i2s.h > create mode 100644 include/ld9040.h > create mode 100644 include/mc34704.h > create mode 100644 include/power/max77686_pmic.h > create mode 100644 include/sound.h Apart from Stephen's question, why is this pull request not from your master branch? Amicalement,
On 14/12/12 04:56, Albert ARIBAUD wrote: > Hi Minkyu, > > On Tue, 11 Dec 2012 20:10:06 +0900, Minkyu Kang <mk7.kang@samsung.com> > wrote: >> Dear Albert, >> >> The following changes since commit fd4d564b3c80b111f18c93adb14233a6a7ddb0e9: >> >> Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07 08:47:59 -0700) >> >> are available in the git repository at: >> >> >> git://git.denx.de/u-boot-samsung resolve >> >> for you to fetch changes up to fbef8e6e7f1233ed20f8c5045e12c9cf31b43540: >> >> universal_c210: check the NULL pointer when get the PMIC (2012-12-11 17:37:28 +0900) >> >> ---------------------------------------------------------------- >> Albert ARIBAUD (1): >> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' >> >> Allen Martin (1): >> tegra: add CONSOLE_MUX support to tegra-kbc >> >> Ashok Kumar Reddy (1): >> ARM: arm1176: Define arch_cpu_init() for s3c64xx >> >> Benoît Thébaudeau (17): >> arm1136: Fix enable_caches() >> mx31: Move EHCI definitions to ehci-fsl.h >> ehci-mxc: Clean up >> ehci-mx5: Clean up >> ehci-mx5: Fix OC_DIS usage >> ehci-mx5: Fix OPM usage >> ehci-mx5: Fix *PM usage for i.MX53 >> ehci-mx5: Add missing OC_DIS for i.MX53 >> ehci-mxc: Make EHCI power/oc polarities configurable >> ehci-mxc: Make i.MX25 EHCI configurable >> ehci-mxc: Define host offsets >> ehci-mxc: Add support for i.MX35 >> mx35pdk: Add support for OTG >> ehci-mx5/6: Make board_ehci_hcd_init() optional >> ehci-mxc: Fix host power mask bit for i.MX35 >> ehci-mxc: Fix host power mask bit for i.MX25 >> mx5: Mark lowlevel_init board-specific code >> >> Chander Kashyap (1): >> Exynos5250: Enable PXE Support >> >> Fabio Estevam (24): >> mx25pdk: Include CONFIG_MX25 >> mx25pdk: Add esdhc support >> pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH >> mx25: Place common functions into sys_proto.h >> pmic: Add support for mc34704 >> mx25pdk: Add Ethernet support >> mx53loco: Allow booting a zImage kernel >> mx25pdk: Allow booting a zImage kernel >> mx51evk: Allow booting a zImage kernel >> mx35pdk: Allow booting a zImage kernel >> mx6qsabre_common: Allow booting a zImage kernel >> mx5: Align SPI CS naming with i.MX53 reference manual >> mx5: Print CSPI clock in 'clock' command >> spi: mxc_spi: Fix handling of chip select >> spi: mxc_spi: Fix spi clock glitch durant reset >> mx6: clock: Only show CSPI clock if CSPI is enabled >> mx28evk: Configure CONFIG_BOOTDELAY to one second >> mx53loco: Configure CONFIG_BOOTDELAY to one second >> mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second >> mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second >> mx51evk: Configure CONFIG_BOOTDELAY to one second >> mx25pdk: Configure CONFIG_BOOTDELAY to one second >> mx31pdk: Configure CONFIG_BOOTDELAY to one second >> mx35pdk: Configure CONFIG_BOOTDELAY to one second >> >> Hatim RV (3): >> EXYNOS: Add clock for SPI >> EXYNOS5: Add base address for SPI >> EXYNOS5: Enable SPI >> >> Marek Vasut (3): >> dm: wdt: Move s5p watchdog timer to drivers/watchdog/ >> mx28: Fix typo in POWER_MINPWR_VBG_OFF >> mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET >> >> Mayuresh Kulkarni (1): >> tegra: Enable display/lcd support on Seaboard >> >> Minkyu Kang (6): >> ARCH: EXYNOS: add support to match product id >> EXYNOS: Clock: Add common function for pll rate calculation >> s3c64xx: fix the compiler error and warning >> Merge branch 'master' of git://git.denx.de/u-boot into resolve >> universal_c210: fix compiler error and compiler warning >> universal_c210: check the NULL pointer when get the PMIC >> >> Piotr Wilczek (12): >> arm:exynos4:trats: Correct SDRAM configuration for trats >> arm:exynos4:trats: Fix SDRAM size >> arm:exynos4:pinmux: Modify the gpio function for mmc >> arm:exynos4:trats: Use pinmux for mmc configuration >> arm:exynos4:universal: Use pinmux for mmc configuration >> arm:exynos4:universal: Eliminated low level init >> arm: trats: Power down core 1 >> exynos4: universal_C210: use software SPI >> misc:max8998 Add LDO macros >> drivers: video: Add ld9040 video driver >> drivers: video: fix image position >> exynos4: universal_C210: add display support >> >> Rajeshwari Shinde (16): >> PMIC: MAX77686: Add support for MAX77686 >> SMDK5250: Config: Enable MAX77686 pmic chip >> SOUND: SAMSUNG: Add I2S driver >> SOUND: Add WM8994 codec >> Sound: Add command for audio playback >> EXYNOS: Add I2S registers >> EXYNOS: Add parameters required by I2S >> EXYNOS: Add pinmux for I2S >> EXYNOS: Add I2S base address >> EXYNOS: Add clock for I2S >> SMDK5250: Enable Sound >> EXYNOS5: Add pinmux support for SPI >> SPI: Add SPI Driver for EXYNOS. >> EXYNOS5: Enable SPI booting. >> POWER: MAX77686: Modified as per the latest Implementation >> SMDK5250: Enable pmic MAX77686 >> >> Simon Glass (17): >> pxa: Disable dcache on palmld, palmtc, zipitz2 >> tegra: Use const for pinmux_config_pingroup/table() >> tegra: Add display support to funcmux >> tegra: fdt: Add pwm binding and node >> tegra: fdt: Add LCD definitions for Tegra >> tegra: Add support for PWM >> tegra: Add LCD driver >> tegra: Add LCD support to Nvidia boards >> arm: Add control over cachability of memory regions >> lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment >> lcd: Add support for flushing LCD fb from dcache after update >> tegra: Align LCD frame buffer to section boundary >> tegra: Support control of cache settings for LCD >> tegra: fdt: Add LCD definitions for Seaboard >> lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console >> tegra: Remove unnecessary CONFIG_SYS_NAND_BASE >> tegra: config: seaboard: Move tegra-common-post to correct place >> >> Stefano Babic (8): >> ARM: Fix start.S when used with SPL in arm1136 >> MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK >> MX35: Add soc_boot_mode and soc_boot_device to MX35 >> SPL: Added SPL target for mx35 SOC to SPL Makefile >> ARM: Add SPL target to arm1136 >> MX35: add support for woodburn board >> MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk >> Merge git://git.denx.de/u-boot >> >> Stephen Warren (4): >> ARM: tegra: TrimSlice: add support for USB1 port >> mmc: tegra: support 4-bit operation too on 8-bit slots >> ARM: tegra: enable 8-bit SD slots in board files >> tegra: use generic fs commands in BOOTCOMMAND >> >> Troy Kisky (4): >> mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite >> mx6: use CONFIG_MX6 instead of CONFIG_MX6Q >> imx-common: cpu: add imx_ddr_size >> arch-mx6: add mx6dl_pins.h >> >> Wei Ni (1): >> tegra: Add SOC support for display/lcd >> >> Łukasz Majewski (1): >> gpio:fix: Proper handling of GPIO subsystem parts at Samsung devices >> >> MAINTAINERS | 1 + >> Makefile | 2 + >> arch/arm/cpu/arm1136/config.mk | 3 + >> arch/arm/cpu/arm1136/cpu.c | 22 +- >> arch/arm/cpu/arm1136/mx35/Makefile | 1 + >> arch/arm/cpu/arm1136/mx35/generic.c | 75 ++ >> arch/arm/cpu/arm1136/mx35/mx35_sdram.c | 137 ++++ >> arch/arm/cpu/arm1136/start.S | 31 +- >> arch/arm/cpu/arm1136/u-boot-spl.lds | 62 ++ >> arch/arm/cpu/arm1176/s3c64xx/Makefile | 2 +- >> arch/arm/cpu/arm1176/s3c64xx/init.c | 26 + >> arch/arm/cpu/armv7/cache_v7.c | 11 + >> arch/arm/cpu/armv7/exynos/clock.c | 350 +++++++-- >> arch/arm/cpu/armv7/exynos/pinmux.c | 122 +++ >> arch/arm/cpu/armv7/mx5/clock.c | 4 +- >> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 2 +- >> arch/arm/cpu/armv7/mx6/clock.c | 2 + >> arch/arm/cpu/armv7/mx6/soc.c | 32 +- >> arch/arm/cpu/armv7/s5p-common/Makefile | 1 - >> arch/arm/cpu/armv7/tegra20/Makefile | 2 + >> arch/arm/cpu/armv7/tegra20/display.c | 409 ++++++++++ >> arch/arm/cpu/armv7/tegra20/pwm.c | 101 +++ >> arch/arm/cpu/tegra20-common/funcmux.c | 37 + >> arch/arm/cpu/tegra20-common/pinmux.c | 4 +- >> arch/arm/dts/tegra20.dtsi | 105 +++ >> arch/arm/imx-common/cpu.c | 66 +- >> arch/arm/include/asm/arch-exynos/clk.h | 4 + >> arch/arm/include/asm/arch-exynos/clock.h | 29 + >> arch/arm/include/asm/arch-exynos/cpu.h | 18 + >> arch/arm/include/asm/arch-exynos/gpio.h | 19 + >> arch/arm/include/asm/arch-exynos/i2s-regs.h | 66 ++ >> arch/arm/include/asm/arch-exynos/periph.h | 7 + >> arch/arm/include/asm/arch-exynos/sound.h | 44 ++ >> arch/arm/include/asm/arch-exynos/spi.h | 78 ++ >> arch/arm/include/asm/arch-mx25/imx-regs.h | 5 +- >> arch/arm/include/asm/arch-mx25/sys_proto.h | 3 + >> arch/arm/include/asm/arch-mx31/imx-regs.h | 27 +- >> arch/arm/include/asm/arch-mx35/imx-regs.h | 4 + >> arch/arm/include/asm/arch-mx35/mmc_host_def.h | 31 + >> arch/arm/include/asm/arch-mx35/spl.h | 38 + >> arch/arm/include/asm/arch-mx35/sys_proto.h | 2 + >> arch/arm/include/asm/arch-mx5/mx5x_pins.h | 6 +- >> arch/arm/include/asm/arch-mx5/sys_proto.h | 10 +- >> arch/arm/include/asm/arch-mx6/imx-regs.h | 2 + >> arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 149 ++++ >> arch/arm/include/asm/arch-mx6/sys_proto.h | 10 +- >> arch/arm/include/asm/arch-mxs/regs-power.h | 4 +- >> arch/arm/include/asm/arch-s5pc1xx/gpio.h | 7 +- >> arch/arm/include/asm/arch-tegra20/dc.h | 545 ++++++++++++++ >> arch/arm/include/asm/arch-tegra20/display.h | 152 ++++ >> arch/arm/include/asm/arch-tegra20/pinmux.h | 4 +- >> arch/arm/include/asm/arch-tegra20/pwm.h | 75 ++ >> arch/arm/include/asm/system.h | 31 + >> arch/arm/lib/cache-cp15.c | 51 +- >> board/compal/paz00/paz00.c | 5 +- >> board/compulab/dts/tegra20-trimslice.dts | 3 +- >> board/compulab/trimslice/trimslice.c | 8 + >> board/freescale/mx25pdk/mx25pdk.c | 114 +++ >> board/freescale/mx31ads/u-boot.lds | 2 + >> board/freescale/mx35pdk/lowlevel_init.S | 4 + >> board/freescale/mx35pdk/mx35pdk.c | 21 + >> board/nvidia/common/board.c | 24 + >> board/nvidia/dts/tegra20-seaboard.dts | 33 + >> board/nvidia/harmony/harmony.c | 5 +- >> board/nvidia/seaboard/seaboard.c | 5 +- >> board/samsung/smdk5250/Makefile | 2 +- >> board/samsung/smdk5250/smdk5250.c | 15 + >> board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} | 31 +- >> board/samsung/trats/trats.c | 80 +- >> board/samsung/universal_c210/Makefile | 1 - >> board/samsung/universal_c210/lowlevel_init.S | 395 ---------- >> board/samsung/universal_c210/universal.c | 337 +++++++-- >> board/syteco/zmx25/zmx25.c | 1 + >> board/woodburn/Makefile | 43 ++ >> board/woodburn/imximage.cfg | 4 + >> board/woodburn/lowlevel_init.S | 38 + >> board/woodburn/woodburn.c | 261 +++++++ >> boards.cfg | 2 + >> common/Makefile | 1 + >> common/cmd_sound.c | 96 +++ >> common/lcd.c | 89 ++- >> common/main.c | 12 +- >> doc/README.imx5 | 5 + >> doc/device-tree-bindings/pwm/tegra20-pwm.txt | 18 + >> doc/device-tree-bindings/video/displaymode.txt | 42 ++ >> doc/device-tree-bindings/video/tegra20-dc.txt | 85 +++ >> drivers/gpio/mxc_gpio.c | 6 +- >> drivers/gpio/s5p_gpio.c | 6 +- >> drivers/input/tegra-kbc.c | 18 +- >> drivers/mmc/tegra_mmc.c | 7 +- >> drivers/power/pmic/Makefile | 1 + >> drivers/power/pmic/pmic_max77686.c | 48 ++ >> drivers/power/power_fsl.c | 8 +- >> drivers/serial/s3c64xx.c | 3 +- >> drivers/sound/Makefile | 48 ++ >> drivers/sound/samsung-i2s.c | 358 +++++++++ >> drivers/sound/sound.c | 228 ++++++ >> drivers/sound/wm8994.c | 792 ++++++++++++++++++++ >> drivers/sound/wm8994.h | 87 +++ >> drivers/sound/wm8994_registers.h | 299 ++++++++ >> drivers/spi/Makefile | 1 + >> drivers/spi/exynos_spi.c | 367 +++++++++ >> drivers/spi/mxc_spi.c | 9 +- >> drivers/usb/host/ehci-mx5.c | 146 +++- >> drivers/usb/host/ehci-mx6.c | 5 + >> drivers/usb/host/ehci-mxc.c | 225 ++++-- >> drivers/video/Makefile | 2 + >> drivers/video/exynos_fb.c | 15 +- >> drivers/video/ipu_regs.h | 2 +- >> drivers/video/ld9040.c | 144 ++++ >> drivers/video/tegra.c | 379 ++++++++++ >> drivers/watchdog/Makefile | 1 + >> .../s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c | 0 >> include/configs/harmony.h | 4 +- >> include/configs/mx25pdk.h | 42 +- >> include/configs/mx28evk.h | 2 +- >> include/configs/mx31pdk.h | 2 +- >> include/configs/mx35pdk.h | 18 +- >> include/configs/mx51_efikamx.h | 1 + >> include/configs/mx51evk.h | 5 +- >> include/configs/mx53evk.h | 1 + >> include/configs/mx53loco.h | 4 +- >> include/configs/mx6qarm2.h | 1 + >> include/configs/mx6qsabre_common.h | 4 +- >> include/configs/mx6qsabrelite.h | 3 +- >> include/configs/palmld.h | 3 + >> include/configs/palmtc.h | 3 + >> include/configs/paz00.h | 3 + >> include/configs/s5pc210_universal.h | 36 + >> include/configs/seaboard.h | 21 +- >> include/configs/smdk5250.h | 48 +- >> include/configs/tec.h | 1 - >> include/configs/tegra-common-post.h | 39 +- >> include/configs/tegra20-common.h | 3 + >> include/configs/trats.h | 17 +- >> include/configs/trimslice.h | 4 + >> include/configs/ventana.h | 3 + >> include/configs/vision2.h | 1 + >> include/configs/whistler.h | 3 + >> include/configs/woodburn.h | 34 + >> include/configs/woodburn_common.h | 313 ++++++++ >> include/configs/woodburn_sd.h | 60 ++ >> include/configs/zipitz2.h | 3 + >> include/configs/zmx25.h | 6 +- >> include/fdtdec.h | 2 + >> include/i2s.h | 127 ++++ >> include/lcd.h | 11 + >> include/ld9040.h | 32 + >> include/mc34704.h | 49 ++ >> include/power/max77686_pmic.h | 158 ++++ >> include/power/max8998_pmic.h | 2 + >> include/sound.h | 62 ++ >> include/usb/ehci-fsl.h | 28 +- >> lib/fdtdec.c | 2 + >> nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 + >> spl/Makefile | 6 + >> 156 files changed, 8322 insertions(+), 865 deletions(-) >> create mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c >> create mode 100644 arch/arm/cpu/arm1136/u-boot-spl.lds >> create mode 100644 arch/arm/cpu/arm1176/s3c64xx/init.c >> create mode 100644 arch/arm/cpu/armv7/tegra20/display.c >> create mode 100644 arch/arm/cpu/armv7/tegra20/pwm.c >> create mode 100644 arch/arm/include/asm/arch-exynos/i2s-regs.h >> create mode 100644 arch/arm/include/asm/arch-exynos/sound.h >> create mode 100644 arch/arm/include/asm/arch-exynos/spi.h >> create mode 100644 arch/arm/include/asm/arch-mx35/mmc_host_def.h >> create mode 100644 arch/arm/include/asm/arch-mx35/spl.h >> create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl_pins.h >> create mode 100644 arch/arm/include/asm/arch-tegra20/dc.h >> create mode 100644 arch/arm/include/asm/arch-tegra20/display.h >> create mode 100644 arch/arm/include/asm/arch-tegra20/pwm.h >> rename board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} (66%) >> delete mode 100644 board/samsung/universal_c210/lowlevel_init.S >> create mode 100644 board/woodburn/Makefile >> create mode 100644 board/woodburn/imximage.cfg >> create mode 100644 board/woodburn/lowlevel_init.S >> create mode 100644 board/woodburn/woodburn.c >> create mode 100644 common/cmd_sound.c >> create mode 100644 doc/device-tree-bindings/pwm/tegra20-pwm.txt >> create mode 100644 doc/device-tree-bindings/video/displaymode.txt >> create mode 100644 doc/device-tree-bindings/video/tegra20-dc.txt >> create mode 100644 drivers/power/pmic/pmic_max77686.c >> create mode 100644 drivers/sound/Makefile >> create mode 100644 drivers/sound/samsung-i2s.c >> create mode 100644 drivers/sound/sound.c >> create mode 100644 drivers/sound/wm8994.c >> create mode 100644 drivers/sound/wm8994.h >> create mode 100644 drivers/sound/wm8994_registers.h >> create mode 100644 drivers/spi/exynos_spi.c >> create mode 100644 drivers/video/ld9040.c >> create mode 100644 drivers/video/tegra.c >> rename arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c (100%) >> create mode 100644 include/configs/woodburn.h >> create mode 100644 include/configs/woodburn_common.h >> create mode 100644 include/configs/woodburn_sd.h >> create mode 100644 include/i2s.h >> create mode 100644 include/ld9040.h >> create mode 100644 include/mc34704.h >> create mode 100644 include/power/max77686_pmic.h >> create mode 100644 include/sound.h > > Apart from Stephen's question, why is this pull request not from your > master branch? > For resolve conflicts. Did I misunderstand your suggestion? "so I suggest that you merge u-boot/master into your tree (with a comment to the effect that you need this to resolve PMIC vs POWER conflicts) or into an ad hoc branch, and resolve the conflicts there, then send a pull request to me for your resolved tree or branch." Thanks. Minkyu Kang.
Hi Minkyu, On Fri, 14 Dec 2012 09:14:11 +0900, Minkyu Kang <mk7.kang@samsung.com> wrote: > On 14/12/12 04:56, Albert ARIBAUD wrote: > > Hi Minkyu, > > > > On Tue, 11 Dec 2012 20:10:06 +0900, Minkyu Kang <mk7.kang@samsung.com> > > wrote: > >> Dear Albert, > >> > >> The following changes since commit fd4d564b3c80b111f18c93adb14233a6a7ddb0e9: > >> > >> Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07 08:47:59 -0700) > >> > >> are available in the git repository at: > >> > >> > >> git://git.denx.de/u-boot-samsung resolve > >> > >> for you to fetch changes up to fbef8e6e7f1233ed20f8c5045e12c9cf31b43540: > >> > >> universal_c210: check the NULL pointer when get the PMIC (2012-12-11 17:37:28 +0900) > >> > >> ---------------------------------------------------------------- > >> Albert ARIBAUD (1): > >> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > >> > >> Allen Martin (1): > >> tegra: add CONSOLE_MUX support to tegra-kbc > >> > >> Ashok Kumar Reddy (1): > >> ARM: arm1176: Define arch_cpu_init() for s3c64xx > >> > >> Benoît Thébaudeau (17): > >> arm1136: Fix enable_caches() > >> mx31: Move EHCI definitions to ehci-fsl.h > >> ehci-mxc: Clean up > >> ehci-mx5: Clean up > >> ehci-mx5: Fix OC_DIS usage > >> ehci-mx5: Fix OPM usage > >> ehci-mx5: Fix *PM usage for i.MX53 > >> ehci-mx5: Add missing OC_DIS for i.MX53 > >> ehci-mxc: Make EHCI power/oc polarities configurable > >> ehci-mxc: Make i.MX25 EHCI configurable > >> ehci-mxc: Define host offsets > >> ehci-mxc: Add support for i.MX35 > >> mx35pdk: Add support for OTG > >> ehci-mx5/6: Make board_ehci_hcd_init() optional > >> ehci-mxc: Fix host power mask bit for i.MX35 > >> ehci-mxc: Fix host power mask bit for i.MX25 > >> mx5: Mark lowlevel_init board-specific code > >> > >> Chander Kashyap (1): > >> Exynos5250: Enable PXE Support > >> > >> Fabio Estevam (24): > >> mx25pdk: Include CONFIG_MX25 > >> mx25pdk: Add esdhc support > >> pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH > >> mx25: Place common functions into sys_proto.h > >> pmic: Add support for mc34704 > >> mx25pdk: Add Ethernet support > >> mx53loco: Allow booting a zImage kernel > >> mx25pdk: Allow booting a zImage kernel > >> mx51evk: Allow booting a zImage kernel > >> mx35pdk: Allow booting a zImage kernel > >> mx6qsabre_common: Allow booting a zImage kernel > >> mx5: Align SPI CS naming with i.MX53 reference manual > >> mx5: Print CSPI clock in 'clock' command > >> spi: mxc_spi: Fix handling of chip select > >> spi: mxc_spi: Fix spi clock glitch durant reset > >> mx6: clock: Only show CSPI clock if CSPI is enabled > >> mx28evk: Configure CONFIG_BOOTDELAY to one second > >> mx53loco: Configure CONFIG_BOOTDELAY to one second > >> mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second > >> mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second > >> mx51evk: Configure CONFIG_BOOTDELAY to one second > >> mx25pdk: Configure CONFIG_BOOTDELAY to one second > >> mx31pdk: Configure CONFIG_BOOTDELAY to one second > >> mx35pdk: Configure CONFIG_BOOTDELAY to one second > >> > >> Hatim RV (3): > >> EXYNOS: Add clock for SPI > >> EXYNOS5: Add base address for SPI > >> EXYNOS5: Enable SPI > >> > >> Marek Vasut (3): > >> dm: wdt: Move s5p watchdog timer to drivers/watchdog/ > >> mx28: Fix typo in POWER_MINPWR_VBG_OFF > >> mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET > >> > >> Mayuresh Kulkarni (1): > >> tegra: Enable display/lcd support on Seaboard > >> > >> Minkyu Kang (6): > >> ARCH: EXYNOS: add support to match product id > >> EXYNOS: Clock: Add common function for pll rate calculation > >> s3c64xx: fix the compiler error and warning > >> Merge branch 'master' of git://git.denx.de/u-boot into resolve > >> universal_c210: fix compiler error and compiler warning > >> universal_c210: check the NULL pointer when get the PMIC > >> > >> Piotr Wilczek (12): > >> arm:exynos4:trats: Correct SDRAM configuration for trats > >> arm:exynos4:trats: Fix SDRAM size > >> arm:exynos4:pinmux: Modify the gpio function for mmc > >> arm:exynos4:trats: Use pinmux for mmc configuration > >> arm:exynos4:universal: Use pinmux for mmc configuration > >> arm:exynos4:universal: Eliminated low level init > >> arm: trats: Power down core 1 > >> exynos4: universal_C210: use software SPI > >> misc:max8998 Add LDO macros > >> drivers: video: Add ld9040 video driver > >> drivers: video: fix image position > >> exynos4: universal_C210: add display support > >> > >> Rajeshwari Shinde (16): > >> PMIC: MAX77686: Add support for MAX77686 > >> SMDK5250: Config: Enable MAX77686 pmic chip > >> SOUND: SAMSUNG: Add I2S driver > >> SOUND: Add WM8994 codec > >> Sound: Add command for audio playback > >> EXYNOS: Add I2S registers > >> EXYNOS: Add parameters required by I2S > >> EXYNOS: Add pinmux for I2S > >> EXYNOS: Add I2S base address > >> EXYNOS: Add clock for I2S > >> SMDK5250: Enable Sound > >> EXYNOS5: Add pinmux support for SPI > >> SPI: Add SPI Driver for EXYNOS. > >> EXYNOS5: Enable SPI booting. > >> POWER: MAX77686: Modified as per the latest Implementation > >> SMDK5250: Enable pmic MAX77686 > >> > >> Simon Glass (17): > >> pxa: Disable dcache on palmld, palmtc, zipitz2 > >> tegra: Use const for pinmux_config_pingroup/table() > >> tegra: Add display support to funcmux > >> tegra: fdt: Add pwm binding and node > >> tegra: fdt: Add LCD definitions for Tegra > >> tegra: Add support for PWM > >> tegra: Add LCD driver > >> tegra: Add LCD support to Nvidia boards > >> arm: Add control over cachability of memory regions > >> lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment > >> lcd: Add support for flushing LCD fb from dcache after update > >> tegra: Align LCD frame buffer to section boundary > >> tegra: Support control of cache settings for LCD > >> tegra: fdt: Add LCD definitions for Seaboard > >> lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console > >> tegra: Remove unnecessary CONFIG_SYS_NAND_BASE > >> tegra: config: seaboard: Move tegra-common-post to correct place > >> > >> Stefano Babic (8): > >> ARM: Fix start.S when used with SPL in arm1136 > >> MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK > >> MX35: Add soc_boot_mode and soc_boot_device to MX35 > >> SPL: Added SPL target for mx35 SOC to SPL Makefile > >> ARM: Add SPL target to arm1136 > >> MX35: add support for woodburn board > >> MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk > >> Merge git://git.denx.de/u-boot > >> > >> Stephen Warren (4): > >> ARM: tegra: TrimSlice: add support for USB1 port > >> mmc: tegra: support 4-bit operation too on 8-bit slots > >> ARM: tegra: enable 8-bit SD slots in board files > >> tegra: use generic fs commands in BOOTCOMMAND > >> > >> Troy Kisky (4): > >> mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite > >> mx6: use CONFIG_MX6 instead of CONFIG_MX6Q > >> imx-common: cpu: add imx_ddr_size > >> arch-mx6: add mx6dl_pins.h > >> > >> Wei Ni (1): > >> tegra: Add SOC support for display/lcd > >> > >> Łukasz Majewski (1): > >> gpio:fix: Proper handling of GPIO subsystem parts at Samsung devices > >> > >> MAINTAINERS | 1 + > >> Makefile | 2 + > >> arch/arm/cpu/arm1136/config.mk | 3 + > >> arch/arm/cpu/arm1136/cpu.c | 22 +- > >> arch/arm/cpu/arm1136/mx35/Makefile | 1 + > >> arch/arm/cpu/arm1136/mx35/generic.c | 75 ++ > >> arch/arm/cpu/arm1136/mx35/mx35_sdram.c | 137 ++++ > >> arch/arm/cpu/arm1136/start.S | 31 +- > >> arch/arm/cpu/arm1136/u-boot-spl.lds | 62 ++ > >> arch/arm/cpu/arm1176/s3c64xx/Makefile | 2 +- > >> arch/arm/cpu/arm1176/s3c64xx/init.c | 26 + > >> arch/arm/cpu/armv7/cache_v7.c | 11 + > >> arch/arm/cpu/armv7/exynos/clock.c | 350 +++++++-- > >> arch/arm/cpu/armv7/exynos/pinmux.c | 122 +++ > >> arch/arm/cpu/armv7/mx5/clock.c | 4 +- > >> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 2 +- > >> arch/arm/cpu/armv7/mx6/clock.c | 2 + > >> arch/arm/cpu/armv7/mx6/soc.c | 32 +- > >> arch/arm/cpu/armv7/s5p-common/Makefile | 1 - > >> arch/arm/cpu/armv7/tegra20/Makefile | 2 + > >> arch/arm/cpu/armv7/tegra20/display.c | 409 ++++++++++ > >> arch/arm/cpu/armv7/tegra20/pwm.c | 101 +++ > >> arch/arm/cpu/tegra20-common/funcmux.c | 37 + > >> arch/arm/cpu/tegra20-common/pinmux.c | 4 +- > >> arch/arm/dts/tegra20.dtsi | 105 +++ > >> arch/arm/imx-common/cpu.c | 66 +- > >> arch/arm/include/asm/arch-exynos/clk.h | 4 + > >> arch/arm/include/asm/arch-exynos/clock.h | 29 + > >> arch/arm/include/asm/arch-exynos/cpu.h | 18 + > >> arch/arm/include/asm/arch-exynos/gpio.h | 19 + > >> arch/arm/include/asm/arch-exynos/i2s-regs.h | 66 ++ > >> arch/arm/include/asm/arch-exynos/periph.h | 7 + > >> arch/arm/include/asm/arch-exynos/sound.h | 44 ++ > >> arch/arm/include/asm/arch-exynos/spi.h | 78 ++ > >> arch/arm/include/asm/arch-mx25/imx-regs.h | 5 +- > >> arch/arm/include/asm/arch-mx25/sys_proto.h | 3 + > >> arch/arm/include/asm/arch-mx31/imx-regs.h | 27 +- > >> arch/arm/include/asm/arch-mx35/imx-regs.h | 4 + > >> arch/arm/include/asm/arch-mx35/mmc_host_def.h | 31 + > >> arch/arm/include/asm/arch-mx35/spl.h | 38 + > >> arch/arm/include/asm/arch-mx35/sys_proto.h | 2 + > >> arch/arm/include/asm/arch-mx5/mx5x_pins.h | 6 +- > >> arch/arm/include/asm/arch-mx5/sys_proto.h | 10 +- > >> arch/arm/include/asm/arch-mx6/imx-regs.h | 2 + > >> arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 149 ++++ > >> arch/arm/include/asm/arch-mx6/sys_proto.h | 10 +- > >> arch/arm/include/asm/arch-mxs/regs-power.h | 4 +- > >> arch/arm/include/asm/arch-s5pc1xx/gpio.h | 7 +- > >> arch/arm/include/asm/arch-tegra20/dc.h | 545 ++++++++++++++ > >> arch/arm/include/asm/arch-tegra20/display.h | 152 ++++ > >> arch/arm/include/asm/arch-tegra20/pinmux.h | 4 +- > >> arch/arm/include/asm/arch-tegra20/pwm.h | 75 ++ > >> arch/arm/include/asm/system.h | 31 + > >> arch/arm/lib/cache-cp15.c | 51 +- > >> board/compal/paz00/paz00.c | 5 +- > >> board/compulab/dts/tegra20-trimslice.dts | 3 +- > >> board/compulab/trimslice/trimslice.c | 8 + > >> board/freescale/mx25pdk/mx25pdk.c | 114 +++ > >> board/freescale/mx31ads/u-boot.lds | 2 + > >> board/freescale/mx35pdk/lowlevel_init.S | 4 + > >> board/freescale/mx35pdk/mx35pdk.c | 21 + > >> board/nvidia/common/board.c | 24 + > >> board/nvidia/dts/tegra20-seaboard.dts | 33 + > >> board/nvidia/harmony/harmony.c | 5 +- > >> board/nvidia/seaboard/seaboard.c | 5 +- > >> board/samsung/smdk5250/Makefile | 2 +- > >> board/samsung/smdk5250/smdk5250.c | 15 + > >> board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} | 31 +- > >> board/samsung/trats/trats.c | 80 +- > >> board/samsung/universal_c210/Makefile | 1 - > >> board/samsung/universal_c210/lowlevel_init.S | 395 ---------- > >> board/samsung/universal_c210/universal.c | 337 +++++++-- > >> board/syteco/zmx25/zmx25.c | 1 + > >> board/woodburn/Makefile | 43 ++ > >> board/woodburn/imximage.cfg | 4 + > >> board/woodburn/lowlevel_init.S | 38 + > >> board/woodburn/woodburn.c | 261 +++++++ > >> boards.cfg | 2 + > >> common/Makefile | 1 + > >> common/cmd_sound.c | 96 +++ > >> common/lcd.c | 89 ++- > >> common/main.c | 12 +- > >> doc/README.imx5 | 5 + > >> doc/device-tree-bindings/pwm/tegra20-pwm.txt | 18 + > >> doc/device-tree-bindings/video/displaymode.txt | 42 ++ > >> doc/device-tree-bindings/video/tegra20-dc.txt | 85 +++ > >> drivers/gpio/mxc_gpio.c | 6 +- > >> drivers/gpio/s5p_gpio.c | 6 +- > >> drivers/input/tegra-kbc.c | 18 +- > >> drivers/mmc/tegra_mmc.c | 7 +- > >> drivers/power/pmic/Makefile | 1 + > >> drivers/power/pmic/pmic_max77686.c | 48 ++ > >> drivers/power/power_fsl.c | 8 +- > >> drivers/serial/s3c64xx.c | 3 +- > >> drivers/sound/Makefile | 48 ++ > >> drivers/sound/samsung-i2s.c | 358 +++++++++ > >> drivers/sound/sound.c | 228 ++++++ > >> drivers/sound/wm8994.c | 792 ++++++++++++++++++++ > >> drivers/sound/wm8994.h | 87 +++ > >> drivers/sound/wm8994_registers.h | 299 ++++++++ > >> drivers/spi/Makefile | 1 + > >> drivers/spi/exynos_spi.c | 367 +++++++++ > >> drivers/spi/mxc_spi.c | 9 +- > >> drivers/usb/host/ehci-mx5.c | 146 +++- > >> drivers/usb/host/ehci-mx6.c | 5 + > >> drivers/usb/host/ehci-mxc.c | 225 ++++-- > >> drivers/video/Makefile | 2 + > >> drivers/video/exynos_fb.c | 15 +- > >> drivers/video/ipu_regs.h | 2 +- > >> drivers/video/ld9040.c | 144 ++++ > >> drivers/video/tegra.c | 379 ++++++++++ > >> drivers/watchdog/Makefile | 1 + > >> .../s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c | 0 > >> include/configs/harmony.h | 4 +- > >> include/configs/mx25pdk.h | 42 +- > >> include/configs/mx28evk.h | 2 +- > >> include/configs/mx31pdk.h | 2 +- > >> include/configs/mx35pdk.h | 18 +- > >> include/configs/mx51_efikamx.h | 1 + > >> include/configs/mx51evk.h | 5 +- > >> include/configs/mx53evk.h | 1 + > >> include/configs/mx53loco.h | 4 +- > >> include/configs/mx6qarm2.h | 1 + > >> include/configs/mx6qsabre_common.h | 4 +- > >> include/configs/mx6qsabrelite.h | 3 +- > >> include/configs/palmld.h | 3 + > >> include/configs/palmtc.h | 3 + > >> include/configs/paz00.h | 3 + > >> include/configs/s5pc210_universal.h | 36 + > >> include/configs/seaboard.h | 21 +- > >> include/configs/smdk5250.h | 48 +- > >> include/configs/tec.h | 1 - > >> include/configs/tegra-common-post.h | 39 +- > >> include/configs/tegra20-common.h | 3 + > >> include/configs/trats.h | 17 +- > >> include/configs/trimslice.h | 4 + > >> include/configs/ventana.h | 3 + > >> include/configs/vision2.h | 1 + > >> include/configs/whistler.h | 3 + > >> include/configs/woodburn.h | 34 + > >> include/configs/woodburn_common.h | 313 ++++++++ > >> include/configs/woodburn_sd.h | 60 ++ > >> include/configs/zipitz2.h | 3 + > >> include/configs/zmx25.h | 6 +- > >> include/fdtdec.h | 2 + > >> include/i2s.h | 127 ++++ > >> include/lcd.h | 11 + > >> include/ld9040.h | 32 + > >> include/mc34704.h | 49 ++ > >> include/power/max77686_pmic.h | 158 ++++ > >> include/power/max8998_pmic.h | 2 + > >> include/sound.h | 62 ++ > >> include/usb/ehci-fsl.h | 28 +- > >> lib/fdtdec.c | 2 + > >> nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 + > >> spl/Makefile | 6 + > >> 156 files changed, 8322 insertions(+), 865 deletions(-) > >> create mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c > >> create mode 100644 arch/arm/cpu/arm1136/u-boot-spl.lds > >> create mode 100644 arch/arm/cpu/arm1176/s3c64xx/init.c > >> create mode 100644 arch/arm/cpu/armv7/tegra20/display.c > >> create mode 100644 arch/arm/cpu/armv7/tegra20/pwm.c > >> create mode 100644 arch/arm/include/asm/arch-exynos/i2s-regs.h > >> create mode 100644 arch/arm/include/asm/arch-exynos/sound.h > >> create mode 100644 arch/arm/include/asm/arch-exynos/spi.h > >> create mode 100644 arch/arm/include/asm/arch-mx35/mmc_host_def.h > >> create mode 100644 arch/arm/include/asm/arch-mx35/spl.h > >> create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl_pins.h > >> create mode 100644 arch/arm/include/asm/arch-tegra20/dc.h > >> create mode 100644 arch/arm/include/asm/arch-tegra20/display.h > >> create mode 100644 arch/arm/include/asm/arch-tegra20/pwm.h > >> rename board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} (66%) > >> delete mode 100644 board/samsung/universal_c210/lowlevel_init.S > >> create mode 100644 board/woodburn/Makefile > >> create mode 100644 board/woodburn/imximage.cfg > >> create mode 100644 board/woodburn/lowlevel_init.S > >> create mode 100644 board/woodburn/woodburn.c > >> create mode 100644 common/cmd_sound.c > >> create mode 100644 doc/device-tree-bindings/pwm/tegra20-pwm.txt > >> create mode 100644 doc/device-tree-bindings/video/displaymode.txt > >> create mode 100644 doc/device-tree-bindings/video/tegra20-dc.txt > >> create mode 100644 drivers/power/pmic/pmic_max77686.c > >> create mode 100644 drivers/sound/Makefile > >> create mode 100644 drivers/sound/samsung-i2s.c > >> create mode 100644 drivers/sound/sound.c > >> create mode 100644 drivers/sound/wm8994.c > >> create mode 100644 drivers/sound/wm8994.h > >> create mode 100644 drivers/sound/wm8994_registers.h > >> create mode 100644 drivers/spi/exynos_spi.c > >> create mode 100644 drivers/video/ld9040.c > >> create mode 100644 drivers/video/tegra.c > >> rename arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c (100%) > >> create mode 100644 include/configs/woodburn.h > >> create mode 100644 include/configs/woodburn_common.h > >> create mode 100644 include/configs/woodburn_sd.h > >> create mode 100644 include/i2s.h > >> create mode 100644 include/ld9040.h > >> create mode 100644 include/mc34704.h > >> create mode 100644 include/power/max77686_pmic.h > >> create mode 100644 include/sound.h > > > > Apart from Stephen's question, why is this pull request not from your > > master branch? > > > > For resolve conflicts. > Did I misunderstand your suggestion? > > "so I suggest that you merge u-boot/master into your tree (with a comment to > the effect that you need this to resolve PMIC vs POWER conflicts) or > into an ad hoc branch, and resolve the conflicts there, then send a > pull request to me for your resolved tree or branch." You're right. I was a bit quick to reply when I read Stephen's question. Can you please address it too? > Thanks. > Minkyu Kang. > Amicalement,
Dear Albert, On Saturday, December 15, 2012, Albert ARIBAUD wrote: > Hi Minkyu, > > On Fri, 14 Dec 2012 09:14:11 +0900, Minkyu Kang <mk7.kang@samsung.com<javascript:;> > > > wrote: > > On 14/12/12 04:56, Albert ARIBAUD wrote: > > > Hi Minkyu, > > > > > > On Tue, 11 Dec 2012 20:10:06 +0900, Minkyu Kang <mk7.kang@samsung.com> > > > wrote: > > >> Dear Albert, > > >> > > >> The following changes since commit > fd4d564b3c80b111f18c93adb14233a6a7ddb0e9: > > >> > > >> Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07 > 08:47:59 -0700) > > >> > > >> are available in the git repository at: > > >> > > >> > > >> git://git.denx.de/u-boot-samsung resolve > > >> > > >> for you to fetch changes up to > fbef8e6e7f1233ed20f8c5045e12c9cf31b43540: > > >> > > >> universal_c210: check the NULL pointer when get the PMIC > (2012-12-11 17:37:28 +0900) > > >> > > >> ---------------------------------------------------------------- > > >> Albert ARIBAUD (1): > > >> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > > >> > > >> Allen Martin (1): > > >> tegra: add CONSOLE_MUX support to tegra-kbc > > >> > > >> Ashok Kumar Reddy (1): > > >> ARM: arm1176: Define arch_cpu_init() for s3c64xx > > >> > > >> Benoît Thébaudeau (17): > > >> arm1136: Fix enable_caches() > > >> mx31: Move EHCI definitions to ehci-fsl.h > > >> ehci-mxc: Clean up > > >> ehci-mx5: Clean up > > >> ehci-mx5: Fix OC_DIS usage > > >> ehci-mx5: Fix OPM usage > > >> ehci-mx5: Fix *PM usage for i.MX53 > > >> ehci-mx5: Add missing OC_DIS for i.MX53 > > >> ehci-mxc: Make EHCI power/oc polarities configurable > > >> ehci-mxc: Make i.MX25 EHCI configurable > > >> ehci-mxc: Define host offsets > > >> ehci-mxc: Add support for i.MX35 > > >> mx35pdk: Add support for OTG > > >> ehci-mx5/6: Make board_ehci_hcd_init() optional > > >> ehci-mxc: Fix host power mask bit for i.MX35 > > >> ehci-mxc: Fix host power mask bit for i.MX25 > > >> mx5: Mark lowlevel_init board-specific code > > >> > > >> Chander Kashyap (1): > > >> Exynos5250: Enable PXE Support > > >> > > >> Fabio Estevam (24): > > >> mx25pdk: Include CONFIG_MX25 > > >> mx25pdk: Add esdhc support > > >> pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH > > >> mx25: Place common functions into sys_proto.h > > >> pmic: Add support for mc34704 > > >> mx25pdk: Add Ethernet support > > >> mx53loco: Allow booting a zImage kernel > > >> mx25pdk: Allow booting a zImage kernel > > >> mx51evk: Allow booting a zImage kernel > > >> mx35pdk: Allow booting a zImage kernel > > >> mx6qsabre_common: Allow booting a zImage kernel > > >> mx5: Align SPI CS naming with i.MX53 reference manual > > >> mx5: Print CSPI clock in 'clock' command > > >> spi: mxc_spi: Fix handling of chip select > > >> spi: mxc_spi: Fix spi clock glitch durant reset > > >> mx6: clock: Only show CSPI clock if CSPI is enabled > > >> mx28evk: Configure CONFIG_BOOTDELAY to one second > > >> mx53loco: Configure CONFIG_BOOTDELAY to one second > > >> mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second > > >> mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second > > >> mx51evk: Configure CONFIG_BOOTDELAY to one second > > >> mx25pdk: Configure CONFIG_BOOTDELAY to one sYou're right. I was > a bit quick to reply when I read Stephen's > question. Can you please address it too? Address for what? > > > Thanks. > > Minkyu Kang. > > > > Amicalement, > -- > Albert. > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de <javascript:;> > http://lists.denx.de/mailman/listinfo/u-boot >
Hi Minkyu, On Tue, 18 Dec 2012 00:14:34 +0900, Minkyu Kang <promsoft@gmail.com> wrote: > Dear Albert, > > On Saturday, December 15, 2012, Albert ARIBAUD wrote: > > > Hi Minkyu, > > > > On Fri, 14 Dec 2012 09:14:11 +0900, Minkyu Kang <mk7.kang@samsung.com<javascript:;> > > > > > wrote: > > > On 14/12/12 04:56, Albert ARIBAUD wrote: > > > > Hi Minkyu, > > > > > > > > On Tue, 11 Dec 2012 20:10:06 +0900, Minkyu Kang <mk7.kang@samsung.com> > > > > wrote: > > > >> Dear Albert, > > > >> > > > >> The following changes since commit > > fd4d564b3c80b111f18c93adb14233a6a7ddb0e9: > > > >> > > > >> Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07 > > 08:47:59 -0700) > > > >> > > > >> are available in the git repository at: > > > >> > > > >> > > > >> git://git.denx.de/u-boot-samsung resolve > > > >> > > > >> for you to fetch changes up to > > fbef8e6e7f1233ed20f8c5045e12c9cf31b43540: > > > >> > > > >> universal_c210: check the NULL pointer when get the PMIC > > (2012-12-11 17:37:28 +0900) > > > >> > > > >> ---------------------------------------------------------------- > > > >> Albert ARIBAUD (1): > > > >> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > > > >> > > > >> Allen Martin (1): > > > >> tegra: add CONSOLE_MUX support to tegra-kbc > > > >> > > > >> Ashok Kumar Reddy (1): > > > >> ARM: arm1176: Define arch_cpu_init() for s3c64xx > > > >> > > > >> Benoît Thébaudeau (17): > > > >> arm1136: Fix enable_caches() > > > >> mx31: Move EHCI definitions to ehci-fsl.h > > > >> ehci-mxc: Clean up > > > >> ehci-mx5: Clean up > > > >> ehci-mx5: Fix OC_DIS usage > > > >> ehci-mx5: Fix OPM usage > > > >> ehci-mx5: Fix *PM usage for i.MX53 > > > >> ehci-mx5: Add missing OC_DIS for i.MX53 > > > >> ehci-mxc: Make EHCI power/oc polarities configurable > > > >> ehci-mxc: Make i.MX25 EHCI configurable > > > >> ehci-mxc: Define host offsets > > > >> ehci-mxc: Add support for i.MX35 > > > >> mx35pdk: Add support for OTG > > > >> ehci-mx5/6: Make board_ehci_hcd_init() optional > > > >> ehci-mxc: Fix host power mask bit for i.MX35 > > > >> ehci-mxc: Fix host power mask bit for i.MX25 > > > >> mx5: Mark lowlevel_init board-specific code > > > >> > > > >> Chander Kashyap (1): > > > >> Exynos5250: Enable PXE Support > > > >> > > > >> Fabio Estevam (24): > > > >> mx25pdk: Include CONFIG_MX25 > > > >> mx25pdk: Add esdhc support > > > >> pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH > > > >> mx25: Place common functions into sys_proto.h > > > >> pmic: Add support for mc34704 > > > >> mx25pdk: Add Ethernet support > > > >> mx53loco: Allow booting a zImage kernel > > > >> mx25pdk: Allow booting a zImage kernel > > > >> mx51evk: Allow booting a zImage kernel > > > >> mx35pdk: Allow booting a zImage kernel > > > >> mx6qsabre_common: Allow booting a zImage kernel > > > >> mx5: Align SPI CS naming with i.MX53 reference manual > > > >> mx5: Print CSPI clock in 'clock' command > > > >> spi: mxc_spi: Fix handling of chip select > > > >> spi: mxc_spi: Fix spi clock glitch durant reset > > > >> mx6: clock: Only show CSPI clock if CSPI is enabled > > > >> mx28evk: Configure CONFIG_BOOTDELAY to one second > > > >> mx53loco: Configure CONFIG_BOOTDELAY to one second > > > >> mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second > > > >> mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second > > > >> mx51evk: Configure CONFIG_BOOTDELAY to one second > > > >> mx25pdk: Configure CONFIG_BOOTDELAY to one sYou're right. I was > > a bit quick to reply when I read Stephen's > > question. Can you please address it too? > > Address for what? Can you answer the question Stephen has asked on this list on 11/12 ? <http://www.mail-archive.com/u-boot@lists.denx.de/msg101291.html> > Thanks. > Minkyu Kang. Amicalement,
Dear Albert and Stephen, On 20/12/12 01:28, Albert ARIBAUD wrote: > Hi Minkyu, > > On Tue, 18 Dec 2012 00:14:34 +0900, Minkyu Kang <promsoft@gmail.com> > wrote: >> Dear Albert, >> >> On Saturday, December 15, 2012, Albert ARIBAUD wrote: >> >>> Hi Minkyu, >>> >>> On Fri, 14 Dec 2012 09:14:11 +0900, Minkyu Kang <mk7.kang@samsung.com<javascript:;> >>>> >>> wrote: >>>> On 14/12/12 04:56, Albert ARIBAUD wrote: >>>>> Hi Minkyu, >>>>> >>>>> On Tue, 11 Dec 2012 20:10:06 +0900, Minkyu Kang <mk7.kang@samsung.com> >>>>> wrote: >>>>>> Dear Albert, >>>>>> >>>>>> The following changes since commit >>> fd4d564b3c80b111f18c93adb14233a6a7ddb0e9: >>>>>> >>>>>> Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07 >>> 08:47:59 -0700) >>>>>> >>>>>> are available in the git repository at: >>>>>> >>>>>> >>>>>> git://git.denx.de/u-boot-samsung resolve >>>>>> >>>>>> for you to fetch changes up to >>> fbef8e6e7f1233ed20f8c5045e12c9cf31b43540: >>>>>> >>>>>> universal_c210: check the NULL pointer when get the PMIC >>> (2012-12-11 17:37:28 +0900) >>>>>> >>>>>> ---------------------------------------------------------------- >>>>>> Albert ARIBAUD (1): >>>>>> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' >>>>>> >>>>>> Allen Martin (1): >>>>>> tegra: add CONSOLE_MUX support to tegra-kbc >>>>>> >>>>>> Ashok Kumar Reddy (1): >>>>>> ARM: arm1176: Define arch_cpu_init() for s3c64xx >>>>>> >>>>>> Benoît Thébaudeau (17): >>>>>> arm1136: Fix enable_caches() >>>>>> mx31: Move EHCI definitions to ehci-fsl.h >>>>>> ehci-mxc: Clean up >>>>>> ehci-mx5: Clean up >>>>>> ehci-mx5: Fix OC_DIS usage >>>>>> ehci-mx5: Fix OPM usage >>>>>> ehci-mx5: Fix *PM usage for i.MX53 >>>>>> ehci-mx5: Add missing OC_DIS for i.MX53 >>>>>> ehci-mxc: Make EHCI power/oc polarities configurable >>>>>> ehci-mxc: Make i.MX25 EHCI configurable >>>>>> ehci-mxc: Define host offsets >>>>>> ehci-mxc: Add support for i.MX35 >>>>>> mx35pdk: Add support for OTG >>>>>> ehci-mx5/6: Make board_ehci_hcd_init() optional >>>>>> ehci-mxc: Fix host power mask bit for i.MX35 >>>>>> ehci-mxc: Fix host power mask bit for i.MX25 >>>>>> mx5: Mark lowlevel_init board-specific code >>>>>> >>>>>> Chander Kashyap (1): >>>>>> Exynos5250: Enable PXE Support >>>>>> >>>>>> Fabio Estevam (24): >>>>>> mx25pdk: Include CONFIG_MX25 >>>>>> mx25pdk: Add esdhc support >>>>>> pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH >>>>>> mx25: Place common functions into sys_proto.h >>>>>> pmic: Add support for mc34704 >>>>>> mx25pdk: Add Ethernet support >>>>>> mx53loco: Allow booting a zImage kernel >>>>>> mx25pdk: Allow booting a zImage kernel >>>>>> mx51evk: Allow booting a zImage kernel >>>>>> mx35pdk: Allow booting a zImage kernel >>>>>> mx6qsabre_common: Allow booting a zImage kernel >>>>>> mx5: Align SPI CS naming with i.MX53 reference manual >>>>>> mx5: Print CSPI clock in 'clock' command >>>>>> spi: mxc_spi: Fix handling of chip select >>>>>> spi: mxc_spi: Fix spi clock glitch durant reset >>>>>> mx6: clock: Only show CSPI clock if CSPI is enabled >>>>>> mx28evk: Configure CONFIG_BOOTDELAY to one second >>>>>> mx53loco: Configure CONFIG_BOOTDELAY to one second >>>>>> mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second >>>>>> mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second >>>>>> mx51evk: Configure CONFIG_BOOTDELAY to one second >>>>>> mx25pdk: Configure CONFIG_BOOTDELAY to one sYou're right. I was >>> a bit quick to reply when I read Stephen's >>> question. Can you please address it too? >> >> Address for what? > > Can you answer the question Stephen has asked on this list on 11/12 ? > > <http://www.mail-archive.com/u-boot@lists.denx.de/msg101291.html> Comes from u-boot-arm tree. The base of this pull request is u-boot tree, hence some u-boot-arm commits are included. But it doesn't matter maybe.. because this pull request is for u-boot-arm tree. Thanks. Minkyu Kang.
On 12/19/2012 10:59 PM, Minkyu Kang wrote: > Dear Albert and Stephen, > > On 20/12/12 01:28, Albert ARIBAUD wrote: ... >> Can you answer the question Stephen has asked on this list on 11/12 ? >> >> <http://www.mail-archive.com/u-boot@lists.denx.de/msg101291.html> > > Comes from u-boot-arm tree. > The base of this pull request is u-boot tree, hence some u-boot-arm commits are included. > But it doesn't matter maybe.. because this pull request is for u-boot-arm tree. OK, that might explain it, but isn't there a way to list only the new commits?
Hi Stephen, On Wed, 19 Dec 2012 23:24:07 -0700, Stephen Warren <swarren@wwwdotorg.org> wrote: > On 12/19/2012 10:59 PM, Minkyu Kang wrote: > > Dear Albert and Stephen, > > > > On 20/12/12 01:28, Albert ARIBAUD wrote: > ... > >> Can you answer the question Stephen has asked on this list on 11/12 ? > >> > >> <http://www.mail-archive.com/u-boot@lists.denx.de/msg101291.html> > > > > Comes from u-boot-arm tree. > > The base of this pull request is u-boot tree, hence some u-boot-arm commits are included. > > But it doesn't matter maybe.. because this pull request is for u-boot-arm tree. > > OK, that might explain it, but isn't there a way to list only the new > commits? Yes there is, because when doing the pull request, you don't care where commits come from, you only care where they'll be pulled into. IOW, there is no notion of a 'base' for a pull request: you just specify the destination -- here, u-boot-arm -- and that prints only the needed commits. Since pull requests do nothing more than print on the standard output, and in order to speed my merging, I'll fetch u-boot-samsung and perform a local pull request from -samsung/master onto -arm/master and check that the resulting commits are ok. Amicalement,
Hi Minkyu, On Tue, 11 Dec 2012 20:10:06 +0900, Minkyu Kang <mk7.kang@samsung.com> wrote: > Dear Albert, > > The following changes since commit fd4d564b3c80b111f18c93adb14233a6a7ddb0e9: > > Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07 08:47:59 -0700) > > are available in the git repository at: > > > git://git.denx.de/u-boot-samsung resolve > > for you to fetch changes up to fbef8e6e7f1233ed20f8c5045e12c9cf31b43540: > > universal_c210: check the NULL pointer when get the PMIC (2012-12-11 17:37:28 +0900) > > ---------------------------------------------------------------- > Albert ARIBAUD (1): > Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' > > Allen Martin (1): > tegra: add CONSOLE_MUX support to tegra-kbc > > Ashok Kumar Reddy (1): > ARM: arm1176: Define arch_cpu_init() for s3c64xx > > Benoît Thébaudeau (17): > arm1136: Fix enable_caches() > mx31: Move EHCI definitions to ehci-fsl.h > ehci-mxc: Clean up > ehci-mx5: Clean up > ehci-mx5: Fix OC_DIS usage > ehci-mx5: Fix OPM usage > ehci-mx5: Fix *PM usage for i.MX53 > ehci-mx5: Add missing OC_DIS for i.MX53 > ehci-mxc: Make EHCI power/oc polarities configurable > ehci-mxc: Make i.MX25 EHCI configurable > ehci-mxc: Define host offsets > ehci-mxc: Add support for i.MX35 > mx35pdk: Add support for OTG > ehci-mx5/6: Make board_ehci_hcd_init() optional > ehci-mxc: Fix host power mask bit for i.MX35 > ehci-mxc: Fix host power mask bit for i.MX25 > mx5: Mark lowlevel_init board-specific code > > Chander Kashyap (1): > Exynos5250: Enable PXE Support > > Fabio Estevam (24): > mx25pdk: Include CONFIG_MX25 > mx25pdk: Add esdhc support > pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH > mx25: Place common functions into sys_proto.h > pmic: Add support for mc34704 > mx25pdk: Add Ethernet support > mx53loco: Allow booting a zImage kernel > mx25pdk: Allow booting a zImage kernel > mx51evk: Allow booting a zImage kernel > mx35pdk: Allow booting a zImage kernel > mx6qsabre_common: Allow booting a zImage kernel > mx5: Align SPI CS naming with i.MX53 reference manual > mx5: Print CSPI clock in 'clock' command > spi: mxc_spi: Fix handling of chip select > spi: mxc_spi: Fix spi clock glitch durant reset > mx6: clock: Only show CSPI clock if CSPI is enabled > mx28evk: Configure CONFIG_BOOTDELAY to one second > mx53loco: Configure CONFIG_BOOTDELAY to one second > mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second > mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second > mx51evk: Configure CONFIG_BOOTDELAY to one second > mx25pdk: Configure CONFIG_BOOTDELAY to one second > mx31pdk: Configure CONFIG_BOOTDELAY to one second > mx35pdk: Configure CONFIG_BOOTDELAY to one second > > Hatim RV (3): > EXYNOS: Add clock for SPI > EXYNOS5: Add base address for SPI > EXYNOS5: Enable SPI > > Marek Vasut (3): > dm: wdt: Move s5p watchdog timer to drivers/watchdog/ > mx28: Fix typo in POWER_MINPWR_VBG_OFF > mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET > > Mayuresh Kulkarni (1): > tegra: Enable display/lcd support on Seaboard > > Minkyu Kang (6): > ARCH: EXYNOS: add support to match product id > EXYNOS: Clock: Add common function for pll rate calculation > s3c64xx: fix the compiler error and warning > Merge branch 'master' of git://git.denx.de/u-boot into resolve > universal_c210: fix compiler error and compiler warning > universal_c210: check the NULL pointer when get the PMIC > > Piotr Wilczek (12): > arm:exynos4:trats: Correct SDRAM configuration for trats > arm:exynos4:trats: Fix SDRAM size > arm:exynos4:pinmux: Modify the gpio function for mmc > arm:exynos4:trats: Use pinmux for mmc configuration > arm:exynos4:universal: Use pinmux for mmc configuration > arm:exynos4:universal: Eliminated low level init > arm: trats: Power down core 1 > exynos4: universal_C210: use software SPI > misc:max8998 Add LDO macros > drivers: video: Add ld9040 video driver > drivers: video: fix image position > exynos4: universal_C210: add display support > > Rajeshwari Shinde (16): > PMIC: MAX77686: Add support for MAX77686 > SMDK5250: Config: Enable MAX77686 pmic chip > SOUND: SAMSUNG: Add I2S driver > SOUND: Add WM8994 codec > Sound: Add command for audio playback > EXYNOS: Add I2S registers > EXYNOS: Add parameters required by I2S > EXYNOS: Add pinmux for I2S > EXYNOS: Add I2S base address > EXYNOS: Add clock for I2S > SMDK5250: Enable Sound > EXYNOS5: Add pinmux support for SPI > SPI: Add SPI Driver for EXYNOS. > EXYNOS5: Enable SPI booting. > POWER: MAX77686: Modified as per the latest Implementation > SMDK5250: Enable pmic MAX77686 > > Simon Glass (17): > pxa: Disable dcache on palmld, palmtc, zipitz2 > tegra: Use const for pinmux_config_pingroup/table() > tegra: Add display support to funcmux > tegra: fdt: Add pwm binding and node > tegra: fdt: Add LCD definitions for Tegra > tegra: Add support for PWM > tegra: Add LCD driver > tegra: Add LCD support to Nvidia boards > arm: Add control over cachability of memory regions > lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment > lcd: Add support for flushing LCD fb from dcache after update > tegra: Align LCD frame buffer to section boundary > tegra: Support control of cache settings for LCD > tegra: fdt: Add LCD definitions for Seaboard > lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console > tegra: Remove unnecessary CONFIG_SYS_NAND_BASE > tegra: config: seaboard: Move tegra-common-post to correct place > > Stefano Babic (8): > ARM: Fix start.S when used with SPL in arm1136 > MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK > MX35: Add soc_boot_mode and soc_boot_device to MX35 > SPL: Added SPL target for mx35 SOC to SPL Makefile > ARM: Add SPL target to arm1136 > MX35: add support for woodburn board > MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk > Merge git://git.denx.de/u-boot > > Stephen Warren (4): > ARM: tegra: TrimSlice: add support for USB1 port > mmc: tegra: support 4-bit operation too on 8-bit slots > ARM: tegra: enable 8-bit SD slots in board files > tegra: use generic fs commands in BOOTCOMMAND > > Troy Kisky (4): > mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite > mx6: use CONFIG_MX6 instead of CONFIG_MX6Q > imx-common: cpu: add imx_ddr_size > arch-mx6: add mx6dl_pins.h > > Wei Ni (1): > tegra: Add SOC support for display/lcd > > Łukasz Majewski (1): > gpio:fix: Proper handling of GPIO subsystem parts at Samsung devices > > MAINTAINERS | 1 + > Makefile | 2 + > arch/arm/cpu/arm1136/config.mk | 3 + > arch/arm/cpu/arm1136/cpu.c | 22 +- > arch/arm/cpu/arm1136/mx35/Makefile | 1 + > arch/arm/cpu/arm1136/mx35/generic.c | 75 ++ > arch/arm/cpu/arm1136/mx35/mx35_sdram.c | 137 ++++ > arch/arm/cpu/arm1136/start.S | 31 +- > arch/arm/cpu/arm1136/u-boot-spl.lds | 62 ++ > arch/arm/cpu/arm1176/s3c64xx/Makefile | 2 +- > arch/arm/cpu/arm1176/s3c64xx/init.c | 26 + > arch/arm/cpu/armv7/cache_v7.c | 11 + > arch/arm/cpu/armv7/exynos/clock.c | 350 +++++++-- > arch/arm/cpu/armv7/exynos/pinmux.c | 122 +++ > arch/arm/cpu/armv7/mx5/clock.c | 4 +- > arch/arm/cpu/armv7/mx5/lowlevel_init.S | 2 +- > arch/arm/cpu/armv7/mx6/clock.c | 2 + > arch/arm/cpu/armv7/mx6/soc.c | 32 +- > arch/arm/cpu/armv7/s5p-common/Makefile | 1 - > arch/arm/cpu/armv7/tegra20/Makefile | 2 + > arch/arm/cpu/armv7/tegra20/display.c | 409 ++++++++++ > arch/arm/cpu/armv7/tegra20/pwm.c | 101 +++ > arch/arm/cpu/tegra20-common/funcmux.c | 37 + > arch/arm/cpu/tegra20-common/pinmux.c | 4 +- > arch/arm/dts/tegra20.dtsi | 105 +++ > arch/arm/imx-common/cpu.c | 66 +- > arch/arm/include/asm/arch-exynos/clk.h | 4 + > arch/arm/include/asm/arch-exynos/clock.h | 29 + > arch/arm/include/asm/arch-exynos/cpu.h | 18 + > arch/arm/include/asm/arch-exynos/gpio.h | 19 + > arch/arm/include/asm/arch-exynos/i2s-regs.h | 66 ++ > arch/arm/include/asm/arch-exynos/periph.h | 7 + > arch/arm/include/asm/arch-exynos/sound.h | 44 ++ > arch/arm/include/asm/arch-exynos/spi.h | 78 ++ > arch/arm/include/asm/arch-mx25/imx-regs.h | 5 +- > arch/arm/include/asm/arch-mx25/sys_proto.h | 3 + > arch/arm/include/asm/arch-mx31/imx-regs.h | 27 +- > arch/arm/include/asm/arch-mx35/imx-regs.h | 4 + > arch/arm/include/asm/arch-mx35/mmc_host_def.h | 31 + > arch/arm/include/asm/arch-mx35/spl.h | 38 + > arch/arm/include/asm/arch-mx35/sys_proto.h | 2 + > arch/arm/include/asm/arch-mx5/mx5x_pins.h | 6 +- > arch/arm/include/asm/arch-mx5/sys_proto.h | 10 +- > arch/arm/include/asm/arch-mx6/imx-regs.h | 2 + > arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 149 ++++ > arch/arm/include/asm/arch-mx6/sys_proto.h | 10 +- > arch/arm/include/asm/arch-mxs/regs-power.h | 4 +- > arch/arm/include/asm/arch-s5pc1xx/gpio.h | 7 +- > arch/arm/include/asm/arch-tegra20/dc.h | 545 ++++++++++++++ > arch/arm/include/asm/arch-tegra20/display.h | 152 ++++ > arch/arm/include/asm/arch-tegra20/pinmux.h | 4 +- > arch/arm/include/asm/arch-tegra20/pwm.h | 75 ++ > arch/arm/include/asm/system.h | 31 + > arch/arm/lib/cache-cp15.c | 51 +- > board/compal/paz00/paz00.c | 5 +- > board/compulab/dts/tegra20-trimslice.dts | 3 +- > board/compulab/trimslice/trimslice.c | 8 + > board/freescale/mx25pdk/mx25pdk.c | 114 +++ > board/freescale/mx31ads/u-boot.lds | 2 + > board/freescale/mx35pdk/lowlevel_init.S | 4 + > board/freescale/mx35pdk/mx35pdk.c | 21 + > board/nvidia/common/board.c | 24 + > board/nvidia/dts/tegra20-seaboard.dts | 33 + > board/nvidia/harmony/harmony.c | 5 +- > board/nvidia/seaboard/seaboard.c | 5 +- > board/samsung/smdk5250/Makefile | 2 +- > board/samsung/smdk5250/smdk5250.c | 15 + > board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} | 31 +- > board/samsung/trats/trats.c | 80 +- > board/samsung/universal_c210/Makefile | 1 - > board/samsung/universal_c210/lowlevel_init.S | 395 ---------- > board/samsung/universal_c210/universal.c | 337 +++++++-- > board/syteco/zmx25/zmx25.c | 1 + > board/woodburn/Makefile | 43 ++ > board/woodburn/imximage.cfg | 4 + > board/woodburn/lowlevel_init.S | 38 + > board/woodburn/woodburn.c | 261 +++++++ > boards.cfg | 2 + > common/Makefile | 1 + > common/cmd_sound.c | 96 +++ > common/lcd.c | 89 ++- > common/main.c | 12 +- > doc/README.imx5 | 5 + > doc/device-tree-bindings/pwm/tegra20-pwm.txt | 18 + > doc/device-tree-bindings/video/displaymode.txt | 42 ++ > doc/device-tree-bindings/video/tegra20-dc.txt | 85 +++ > drivers/gpio/mxc_gpio.c | 6 +- > drivers/gpio/s5p_gpio.c | 6 +- > drivers/input/tegra-kbc.c | 18 +- > drivers/mmc/tegra_mmc.c | 7 +- > drivers/power/pmic/Makefile | 1 + > drivers/power/pmic/pmic_max77686.c | 48 ++ > drivers/power/power_fsl.c | 8 +- > drivers/serial/s3c64xx.c | 3 +- > drivers/sound/Makefile | 48 ++ > drivers/sound/samsung-i2s.c | 358 +++++++++ > drivers/sound/sound.c | 228 ++++++ > drivers/sound/wm8994.c | 792 ++++++++++++++++++++ > drivers/sound/wm8994.h | 87 +++ > drivers/sound/wm8994_registers.h | 299 ++++++++ > drivers/spi/Makefile | 1 + > drivers/spi/exynos_spi.c | 367 +++++++++ > drivers/spi/mxc_spi.c | 9 +- > drivers/usb/host/ehci-mx5.c | 146 +++- > drivers/usb/host/ehci-mx6.c | 5 + > drivers/usb/host/ehci-mxc.c | 225 ++++-- > drivers/video/Makefile | 2 + > drivers/video/exynos_fb.c | 15 +- > drivers/video/ipu_regs.h | 2 +- > drivers/video/ld9040.c | 144 ++++ > drivers/video/tegra.c | 379 ++++++++++ > drivers/watchdog/Makefile | 1 + > .../s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c | 0 > include/configs/harmony.h | 4 +- > include/configs/mx25pdk.h | 42 +- > include/configs/mx28evk.h | 2 +- > include/configs/mx31pdk.h | 2 +- > include/configs/mx35pdk.h | 18 +- > include/configs/mx51_efikamx.h | 1 + > include/configs/mx51evk.h | 5 +- > include/configs/mx53evk.h | 1 + > include/configs/mx53loco.h | 4 +- > include/configs/mx6qarm2.h | 1 + > include/configs/mx6qsabre_common.h | 4 +- > include/configs/mx6qsabrelite.h | 3 +- > include/configs/palmld.h | 3 + > include/configs/palmtc.h | 3 + > include/configs/paz00.h | 3 + > include/configs/s5pc210_universal.h | 36 + > include/configs/seaboard.h | 21 +- > include/configs/smdk5250.h | 48 +- > include/configs/tec.h | 1 - > include/configs/tegra-common-post.h | 39 +- > include/configs/tegra20-common.h | 3 + > include/configs/trats.h | 17 +- > include/configs/trimslice.h | 4 + > include/configs/ventana.h | 3 + > include/configs/vision2.h | 1 + > include/configs/whistler.h | 3 + > include/configs/woodburn.h | 34 + > include/configs/woodburn_common.h | 313 ++++++++ > include/configs/woodburn_sd.h | 60 ++ > include/configs/zipitz2.h | 3 + > include/configs/zmx25.h | 6 +- > include/fdtdec.h | 2 + > include/i2s.h | 127 ++++ > include/lcd.h | 11 + > include/ld9040.h | 32 + > include/mc34704.h | 49 ++ > include/power/max77686_pmic.h | 158 ++++ > include/power/max8998_pmic.h | 2 + > include/sound.h | 62 ++ > include/usb/ehci-fsl.h | 28 +- > lib/fdtdec.c | 2 + > nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 + > spl/Makefile | 6 + > 156 files changed, 8322 insertions(+), 865 deletions(-) > create mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c > create mode 100644 arch/arm/cpu/arm1136/u-boot-spl.lds > create mode 100644 arch/arm/cpu/arm1176/s3c64xx/init.c > create mode 100644 arch/arm/cpu/armv7/tegra20/display.c > create mode 100644 arch/arm/cpu/armv7/tegra20/pwm.c > create mode 100644 arch/arm/include/asm/arch-exynos/i2s-regs.h > create mode 100644 arch/arm/include/asm/arch-exynos/sound.h > create mode 100644 arch/arm/include/asm/arch-exynos/spi.h > create mode 100644 arch/arm/include/asm/arch-mx35/mmc_host_def.h > create mode 100644 arch/arm/include/asm/arch-mx35/spl.h > create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl_pins.h > create mode 100644 arch/arm/include/asm/arch-tegra20/dc.h > create mode 100644 arch/arm/include/asm/arch-tegra20/display.h > create mode 100644 arch/arm/include/asm/arch-tegra20/pwm.h > rename board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} (66%) > delete mode 100644 board/samsung/universal_c210/lowlevel_init.S > create mode 100644 board/woodburn/Makefile > create mode 100644 board/woodburn/imximage.cfg > create mode 100644 board/woodburn/lowlevel_init.S > create mode 100644 board/woodburn/woodburn.c > create mode 100644 common/cmd_sound.c > create mode 100644 doc/device-tree-bindings/pwm/tegra20-pwm.txt > create mode 100644 doc/device-tree-bindings/video/displaymode.txt > create mode 100644 doc/device-tree-bindings/video/tegra20-dc.txt > create mode 100644 drivers/power/pmic/pmic_max77686.c > create mode 100644 drivers/sound/Makefile > create mode 100644 drivers/sound/samsung-i2s.c > create mode 100644 drivers/sound/sound.c > create mode 100644 drivers/sound/wm8994.c > create mode 100644 drivers/sound/wm8994.h > create mode 100644 drivers/sound/wm8994_registers.h > create mode 100644 drivers/spi/exynos_spi.c > create mode 100644 drivers/video/ld9040.c > create mode 100644 drivers/video/tegra.c > rename arch/arm/cpu/armv7/s5p-common/wdt.c => drivers/watchdog/s5p_wdt.c (100%) > create mode 100644 include/configs/woodburn.h > create mode 100644 include/configs/woodburn_common.h > create mode 100644 include/configs/woodburn_sd.h > create mode 100644 include/i2s.h > create mode 100644 include/ld9040.h > create mode 100644 include/mc34704.h > create mode 100644 include/power/max77686_pmic.h > create mode 100644 include/sound.h Applied to u-boot-arm/master, thanks! Amicalement,