mbox

[U-Boot,PULL] : Please pull u-boot-imx

Message ID 50C34BC7.5080806@denx.de
State Accepted
Delegated to: Albert ARIBAUD
Headers show

Pull-request

git://www.denx.de/git/u-boot-imx.git master

Message

Stefano Babic Dec. 8, 2012, 2:16 p.m. UTC
Hi Albert,

please pull from u-boot-imx, master. Conflicts are fixed, request pull
is generated from u-boot/master, as I merged it (so you see also the
commits you have already merged into u-boot-arm from my previous pull
request):

The following changes since commit fd4d564b3c80b111f18c93adb14233a6a7ddb0e9:

  Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07
08:47:59 -0700)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 05a860c228fe6c8f2e7aced8cc8ef88bc1038363:

  Merge branch 'master' of git://git.denx.de/u-boot into master
(2012-12-08 12:02:45 +0100)

----------------------------------------------------------------

Benoît Thébaudeau (16):
      mx31: Move EHCI definitions to ehci-fsl.h
      ehci-mxc: Clean up
      ehci-mx5: Clean up
      ehci-mx5: Fix OC_DIS usage
      ehci-mx5: Fix OPM usage
      ehci-mx5: Fix *PM usage for i.MX53
      ehci-mx5: Add missing OC_DIS for i.MX53
      ehci-mxc: Make EHCI power/oc polarities configurable
      ehci-mxc: Make i.MX25 EHCI configurable
      ehci-mxc: Define host offsets
      ehci-mxc: Add support for i.MX35
      mx35pdk: Add support for OTG
      ehci-mx5/6: Make board_ehci_hcd_init() optional
      ehci-mxc: Fix host power mask bit for i.MX35
      ehci-mxc: Fix host power mask bit for i.MX25
      mx5: Mark lowlevel_init board-specific code

Fabio Estevam (24):
      mx25pdk: Include CONFIG_MX25
      mx25pdk: Add esdhc support
      pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH
      mx25: Place common functions into sys_proto.h
      pmic: Add support for mc34704
      mx25pdk: Add Ethernet support
      mx53loco: Allow booting a zImage kernel
      mx25pdk: Allow booting a zImage kernel
      mx51evk: Allow booting a zImage kernel
      mx35pdk: Allow booting a zImage kernel
      mx6qsabre_common: Allow booting a zImage kernel
      mx5: Align SPI CS naming with i.MX53 reference manual
      mx5: Print CSPI clock in 'clock' command
      spi: mxc_spi: Fix handling of chip select
      spi: mxc_spi: Fix spi clock glitch durant reset
      mx6: clock: Only show CSPI clock if CSPI is enabled
      mx28evk: Configure CONFIG_BOOTDELAY to one second
      mx53loco: Configure CONFIG_BOOTDELAY to one second
      mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second
      mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second
      mx51evk: Configure CONFIG_BOOTDELAY to one second
      mx25pdk: Configure CONFIG_BOOTDELAY to one second
      mx31pdk: Configure CONFIG_BOOTDELAY to one second
      mx35pdk: Configure CONFIG_BOOTDELAY to one second

Marek Vasut (8):
      mx28: Fix typo in POWER_MINPWR_VBG_OFF
      mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET
      mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers
      mx28: Rename regs-power.h to regs-power-mx28.h
      mxs: Silence elftosb
      mxs: Implement common function to setup VDDx
      mxs: Properly setup VDDD in power supply setup code
      mxs: Staticize SPL functions

Otavio Salvador (1):
      mxs: SPL: Generalize memory initialization

Stefano Babic (9):
      ARM: Fix start.S when used with SPL in arm1136
      MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
      MX35: Add soc_boot_mode and soc_boot_device to MX35
      SPL: Added SPL target for mx35 SOC to SPL Makefile
      ARM: Add SPL target to arm1136
      MX35: add support for woodburn board
      MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk
      Merge git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot into master

Troy Kisky (4):
      mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite
      mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
      imx-common: cpu: add imx_ddr_size
      arch-mx6: add mx6dl_pins.h

 MAINTAINERS                                        |    1 +
 Makefile                                           |    3 +-
 arch/arm/cpu/arm1136/config.mk                     |    3 +
 arch/arm/cpu/arm1136/mx35/Makefile                 |    1 +
 arch/arm/cpu/arm1136/mx35/generic.c                |   75 +++++
 arch/arm/cpu/arm1136/mx35/mx35_sdram.c             |  137 +++++++++
 arch/arm/cpu/arm1136/start.S                       |   31 +-
 arch/arm/cpu/arm1136/u-boot-spl.lds                |   62 ++++
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c              |    4 +-
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c          |   38 +--
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c        |  305
+++++++------------
 arch/arm/cpu/armv7/mx5/clock.c                     |    4 +-
 arch/arm/cpu/armv7/mx5/lowlevel_init.S             |    2 +-
 arch/arm/cpu/armv7/mx6/clock.c                     |    2 +
 arch/arm/cpu/armv7/mx6/soc.c                       |   32 +-
 arch/arm/imx-common/cpu.c                          |   66 ++++-
 arch/arm/include/asm/arch-mx25/imx-regs.h          |    5 +-
 arch/arm/include/asm/arch-mx25/sys_proto.h         |    3 +
 arch/arm/include/asm/arch-mx31/imx-regs.h          |   27 +-
 arch/arm/include/asm/arch-mx35/imx-regs.h          |    4 +
 arch/arm/include/asm/arch-mx35/mmc_host_def.h      |   31 ++
 arch/arm/include/asm/arch-mx35/spl.h               |   38 +++
 arch/arm/include/asm/arch-mx5/mx5x_pins.h          |    6 +-
 arch/arm/include/asm/arch-mx5/sys_proto.h          |   10 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h           |    2 +
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h         |  149 ++++++++++
 arch/arm/include/asm/arch-mx6/sys_proto.h          |   10 +-
 arch/arm/include/asm/arch-mxs/imx-regs.h           |    7 +-
 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h  |    6 +-
 .../arch-mxs/{regs-power.h => regs-power-mx28.h}   |    4 +-
 board/freescale/mx25pdk/mx25pdk.c                  |  114 +++++++
 board/freescale/mx31ads/u-boot.lds                 |    2 +
 board/freescale/mx35pdk/lowlevel_init.S            |    4 +
 board/freescale/mx35pdk/mx35pdk.c                  |   21 ++
 board/syteco/zmx25/zmx25.c                         |    1 +
 board/woodburn/Makefile                            |   43 +++
 board/woodburn/imximage.cfg                        |    4 +
 board/woodburn/lowlevel_init.S                     |   38 +++
 board/woodburn/woodburn.c                          |  265 +++++++++++++++++
 boards.cfg                                         |    2 +
 doc/README.imx5                                    |    5 +
 drivers/gpio/mxc_gpio.c                            |    6 +-
 drivers/power/power_fsl.c                          |    8 +-
 drivers/spi/mxc_spi.c                              |    9 +-
 drivers/usb/host/ehci-mx5.c                        |  146 +++++++--
 drivers/usb/host/ehci-mx6.c                        |    5 +
 drivers/usb/host/ehci-mxc.c                        |  225 ++++++++++----
 drivers/video/ipu_regs.h                           |    2 +-
 include/configs/mx25pdk.h                          |   42 ++-
 include/configs/mx28evk.h                          |    2 +-
 include/configs/mx31pdk.h                          |    2 +-
 include/configs/mx35pdk.h                          |   18 +-
 include/configs/mx51_efikamx.h                     |    1 +
 include/configs/mx51evk.h                          |    5 +-
 include/configs/mx53evk.h                          |    1 +
 include/configs/mx53loco.h                         |    4 +-
 include/configs/mx6qarm2.h                         |    1 +
 include/configs/mx6qsabre_common.h                 |    4 +-
 include/configs/mx6qsabrelite.h                    |    3 +-
 include/configs/vision2.h                          |    1 +
 include/configs/woodburn.h                         |   34 +++
 include/configs/woodburn_common.h                  |  313
++++++++++++++++++++
 include/configs/woodburn_sd.h                      |   60 ++++
 include/configs/zmx25.h                            |    6 +-
 include/mc34704.h                                  |   49 +++
 include/usb/ehci-fsl.h                             |   28 +-
 nand_spl/board/freescale/mx31pdk/u-boot.lds        |    2 +
 spl/Makefile                                       |    6 +
 69 files changed, 2159 insertions(+), 393 deletions(-)
 create mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c
 create mode 100644 arch/arm/cpu/arm1136/u-boot-spl.lds
 create mode 100644 arch/arm/include/asm/arch-mx35/mmc_host_def.h
 create mode 100644 arch/arm/include/asm/arch-mx35/spl.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl_pins.h
 rename arch/arm/include/asm/arch-mxs/{regs-power.h =>
regs-power-mx28.h} (99%)
 create mode 100644 board/woodburn/Makefile
 create mode 100644 board/woodburn/imximage.cfg
 create mode 100644 board/woodburn/lowlevel_init.S
 create mode 100644 board/woodburn/woodburn.c
 create mode 100644 include/configs/woodburn.h
 create mode 100644 include/configs/woodburn_common.h
 create mode 100644 include/configs/woodburn_sd.h
 create mode 100644 include/mc34704.h

Regards,
Stefano

Comments

Albert ARIBAUD Dec. 21, 2012, 8:46 p.m. UTC | #1
Hi Stefano,

On Sat, 08 Dec 2012 15:16:39 +0100, Stefano Babic <sbabic@denx.de>
wrote:
> Hi Albert,
> 
> please pull from u-boot-imx, master. Conflicts are fixed, request pull
> is generated from u-boot/master, as I merged it (so you see also the
> commits you have already merged into u-boot-arm from my previous pull
> request):
> 
> The following changes since commit fd4d564b3c80b111f18c93adb14233a6a7ddb0e9:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07
> 08:47:59 -0700)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 05a860c228fe6c8f2e7aced8cc8ef88bc1038363:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot into master
> (2012-12-08 12:02:45 +0100)

Hmm, your request says master but the 'up to' points to 'master merge'.
As master has a few more commits including changes to woodburn boards
that makes them use the new power interface, I guess I should ignore
the 'up to' and simply use master (b874df74...)?

Amicalement,
Stefano Babic Dec. 21, 2012, 9:35 p.m. UTC | #2
Am 21/12/2012 21:46, schrieb Albert ARIBAUD:
> Hi Stefano,
> 

Hi Albert,

> Hmm, your request says master but the 'up to' points to 'master merge'.
> As master has a few more commits including changes to woodburn boards
> that makes them use the new power interface, I guess I should ignore
> the 'up to' and simply use master (b874df74...)?

Yes, please use master (b874df74af..), thanks.

Stefano
Albert ARIBAUD Dec. 23, 2012, 4:47 p.m. UTC | #3
Hi stefano,

On Fri, 21 Dec 2012 22:35:32 +0100, stefano babic <sbabic@denx.de>
wrote:
> Am 21/12/2012 21:46, schrieb Albert ARIBAUD:
> > Hi Stefano,
> > 
> 
> Hi Albert,
> 
> > Hmm, your request says master but the 'up to' points to 'master merge'.
> > As master has a few more commits including changes to woodburn boards
> > that makes them use the new power interface, I guess I should ignore
> > the 'up to' and simply use master (b874df74...)?
> 
> Yes, please use master (b874df74af..), thanks.
> 
> Stefano

Applied, thanks!

Amicalement,