Message ID | 1355317734-55761-3-git-send-email-jfrei@linux.vnet.ibm.com |
---|---|
State | New |
Headers | show |
On 12.12.2012, at 14:08, Jens Freimann wrote: > Add a CPU reset handler to have all CPUs in a PoP compliant > state. > > Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> > > --- > v1 -> v2: > * move setting of control registers and psa to s390_cpu_reset > and call it from the new s390_machine_cpu_reset_cb() > This makes it more similar to how it is done on x86 > * in s390_cpu_reset() set env->halted state of cpu after > the memset. This is needed to keep our s390_cpu_running > counter in sync when s390_cpu_reset is called via the > qemu_devices_reset path > * set env->halted state in s390_cpu_initfn to 1 to avoid > decrementing the cpu counter during first reset > --- > target-s390x/cpu.c | 31 +++++++++++++++++++++++++++++-- > target-s390x/kvm.c | 9 ++++++++- > 2 files changed, 37 insertions(+), 3 deletions(-) > > diff --git a/target-s390x/cpu.c b/target-s390x/cpu.c > index 619b202..75f60b3 100644 > --- a/target-s390x/cpu.c > +++ b/target-s390x/cpu.c > @@ -4,6 +4,7 @@ > * Copyright (c) 2009 Ulrich Hecht > * Copyright (c) 2011 Alexander Graf > * Copyright (c) 2012 SUSE LINUX Products GmbH > + * Copyright (c) 2012 IBM Corp. > * > * This library is free software; you can redistribute it and/or > * modify it under the terms of the GNU Lesser General Public > @@ -18,9 +19,13 @@ > * You should have received a copy of the GNU Lesser General Public > * License along with this library; if not, see > * <http://www.gnu.org/licenses/lgpl-2.1.html> > + * Contributions after 2012-12-11 are licensed under the terms of the > + * GNU GPL, version 2 or (at your option) any later version. > + * > */ > > #include "cpu.h" > +#include "hw/hw.h" > #include "qemu-common.h" > #include "qemu-timer.h" > > @@ -37,12 +42,29 @@ static void s390_cpu_reset(CPUState *s) > log_cpu_state(env, 0); > } > > - scc->parent_reset(s); > + s390_del_running_cpu(env); > > + scc->parent_reset(s); > memset(env, 0, offsetof(CPUS390XState, breakpoints)); > + > + /* architectured initial values for CR 0 and 14 */ > + env->cregs[0] = 0xE0UL; > + env->cregs[14] = 0xC2000000UL; > + /* set to z/Architecture mode */ > + env->psw.mask = 0x0000000180000000ULL; > + env->psa = 0; > + /* set halted to 1 to make sure we can add the cpu in > + * s390_ipl_cpu code */ > + env->halted = 1; So who sets cpu0 to halted=0 again? Please add that as a comment here. Alex > /* FIXME: reset vector? */ > tlb_flush(env, 1); > - s390_add_running_cpu(env); > +} > + > +static void s390_cpu_machine_reset_cb(void *opaque) > +{ > + S390CPU *cpu = opaque; > + > + cpu_reset(CPU(cpu)); > } > > static void s390_cpu_initfn(Object *obj) > @@ -66,7 +88,12 @@ static void s390_cpu_initfn(Object *obj) > env->cpu_num = cpu_num++; > env->ext_index = -1; > > + /* set env->halted state to 1 to avoid decrementing the running > + * cpu counter in s390_cpu_reset to a negative number at > + * initial ipl */ > + env->halted = 1; > cpu_reset(CPU(cpu)); > + qemu_register_reset(s390_cpu_machine_reset_cb, cpu); > } > > static void s390_cpu_class_init(ObjectClass *oc, void *data) > diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c > index 94de764..fda9f1f 100644 > --- a/target-s390x/kvm.c > +++ b/target-s390x/kvm.c > @@ -85,7 +85,14 @@ int kvm_arch_init_vcpu(CPUS390XState *env) > > void kvm_arch_reset_vcpu(CPUS390XState *env) > { > - /* FIXME: add code to reset vcpu. */ > + /* The initial reset call is needed here to reset in-kernel > + * vcpu data that we can't access directly from QEMU > + * (i.e. with older kernels which don't support sync_regs/ONE_REG). > + * Before this ioctl cpu_synchronize_state() is called in common kvm > + * code (kvm-all) */ > + if (kvm_vcpu_ioctl(env, KVM_S390_INITIAL_RESET, NULL)) { > + perror("Can't reset vcpu\n"); > + } > } > > int kvm_arch_put_registers(CPUS390XState *env, int level) > -- > 1.7.12.4 >
On Wed, Dec 12, 2012 at 02:38:40PM +0100, Alexander Graf wrote: > > On 12.12.2012, at 14:08, Jens Freimann wrote: > > > Add a CPU reset handler to have all CPUs in a PoP compliant > > state. > > > > Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> > > > > --- > > v1 -> v2: > > * move setting of control registers and psa to s390_cpu_reset > > and call it from the new s390_machine_cpu_reset_cb() > > This makes it more similar to how it is done on x86 > > * in s390_cpu_reset() set env->halted state of cpu after > > the memset. This is needed to keep our s390_cpu_running > > counter in sync when s390_cpu_reset is called via the > > qemu_devices_reset path > > * set env->halted state in s390_cpu_initfn to 1 to avoid > > decrementing the cpu counter during first reset > > --- > > target-s390x/cpu.c | 31 +++++++++++++++++++++++++++++-- > > target-s390x/kvm.c | 9 ++++++++- > > 2 files changed, 37 insertions(+), 3 deletions(-) > > > > diff --git a/target-s390x/cpu.c b/target-s390x/cpu.c > > index 619b202..75f60b3 100644 > > --- a/target-s390x/cpu.c > > +++ b/target-s390x/cpu.c > > @@ -4,6 +4,7 @@ > > * Copyright (c) 2009 Ulrich Hecht > > * Copyright (c) 2011 Alexander Graf > > * Copyright (c) 2012 SUSE LINUX Products GmbH > > + * Copyright (c) 2012 IBM Corp. > > * > > * This library is free software; you can redistribute it and/or > > * modify it under the terms of the GNU Lesser General Public > > @@ -18,9 +19,13 @@ > > * You should have received a copy of the GNU Lesser General Public > > * License along with this library; if not, see > > * <http://www.gnu.org/licenses/lgpl-2.1.html> > > + * Contributions after 2012-12-11 are licensed under the terms of the > > + * GNU GPL, version 2 or (at your option) any later version. > > + * > > */ > > > > #include "cpu.h" > > +#include "hw/hw.h" > > #include "qemu-common.h" > > #include "qemu-timer.h" > > > > @@ -37,12 +42,29 @@ static void s390_cpu_reset(CPUState *s) > > log_cpu_state(env, 0); > > } > > > > - scc->parent_reset(s); > > + s390_del_running_cpu(env); > > > > + scc->parent_reset(s); > > memset(env, 0, offsetof(CPUS390XState, breakpoints)); > > + > > + /* architectured initial values for CR 0 and 14 */ > > + env->cregs[0] = 0xE0UL; > > + env->cregs[14] = 0xC2000000UL; > > + /* set to z/Architecture mode */ > > + env->psw.mask = 0x0000000180000000ULL; > > + env->psa = 0; > > + /* set halted to 1 to make sure we can add the cpu in > > + * s390_ipl_cpu code */ > > + env->halted = 1; > > So who sets cpu0 to halted=0 again? Please add that as a comment here. It is set to halted=0 by s390_add_running_cpu() in s390_ipl_cpu() for cpu 0 and via the sigp restart path for all other cpus. I will add a comment and send a new version. Jens > Alex > > > /* FIXME: reset vector? */ > > tlb_flush(env, 1); > > - s390_add_running_cpu(env); > > +} > > + > > +static void s390_cpu_machine_reset_cb(void *opaque) > > +{ > > + S390CPU *cpu = opaque; > > + > > + cpu_reset(CPU(cpu)); > > } > > > > static void s390_cpu_initfn(Object *obj) > > @@ -66,7 +88,12 @@ static void s390_cpu_initfn(Object *obj) > > env->cpu_num = cpu_num++; > > env->ext_index = -1; > > > > + /* set env->halted state to 1 to avoid decrementing the running > > + * cpu counter in s390_cpu_reset to a negative number at > > + * initial ipl */ > > + env->halted = 1; > > cpu_reset(CPU(cpu)); > > + qemu_register_reset(s390_cpu_machine_reset_cb, cpu); > > } > > > > static void s390_cpu_class_init(ObjectClass *oc, void *data) > > diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c > > index 94de764..fda9f1f 100644 > > --- a/target-s390x/kvm.c > > +++ b/target-s390x/kvm.c > > @@ -85,7 +85,14 @@ int kvm_arch_init_vcpu(CPUS390XState *env) > > > > void kvm_arch_reset_vcpu(CPUS390XState *env) > > { > > - /* FIXME: add code to reset vcpu. */ > > + /* The initial reset call is needed here to reset in-kernel > > + * vcpu data that we can't access directly from QEMU > > + * (i.e. with older kernels which don't support sync_regs/ONE_REG). > > + * Before this ioctl cpu_synchronize_state() is called in common kvm > > + * code (kvm-all) */ > > + if (kvm_vcpu_ioctl(env, KVM_S390_INITIAL_RESET, NULL)) { > > + perror("Can't reset vcpu\n"); > > + } > > } > > > > int kvm_arch_put_registers(CPUS390XState *env, int level) > > -- > > 1.7.12.4 > > >
diff --git a/target-s390x/cpu.c b/target-s390x/cpu.c index 619b202..75f60b3 100644 --- a/target-s390x/cpu.c +++ b/target-s390x/cpu.c @@ -4,6 +4,7 @@ * Copyright (c) 2009 Ulrich Hecht * Copyright (c) 2011 Alexander Graf * Copyright (c) 2012 SUSE LINUX Products GmbH + * Copyright (c) 2012 IBM Corp. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public @@ -18,9 +19,13 @@ * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, see * <http://www.gnu.org/licenses/lgpl-2.1.html> + * Contributions after 2012-12-11 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + * */ #include "cpu.h" +#include "hw/hw.h" #include "qemu-common.h" #include "qemu-timer.h" @@ -37,12 +42,29 @@ static void s390_cpu_reset(CPUState *s) log_cpu_state(env, 0); } - scc->parent_reset(s); + s390_del_running_cpu(env); + scc->parent_reset(s); memset(env, 0, offsetof(CPUS390XState, breakpoints)); + + /* architectured initial values for CR 0 and 14 */ + env->cregs[0] = 0xE0UL; + env->cregs[14] = 0xC2000000UL; + /* set to z/Architecture mode */ + env->psw.mask = 0x0000000180000000ULL; + env->psa = 0; + /* set halted to 1 to make sure we can add the cpu in + * s390_ipl_cpu code */ + env->halted = 1; /* FIXME: reset vector? */ tlb_flush(env, 1); - s390_add_running_cpu(env); +} + +static void s390_cpu_machine_reset_cb(void *opaque) +{ + S390CPU *cpu = opaque; + + cpu_reset(CPU(cpu)); } static void s390_cpu_initfn(Object *obj) @@ -66,7 +88,12 @@ static void s390_cpu_initfn(Object *obj) env->cpu_num = cpu_num++; env->ext_index = -1; + /* set env->halted state to 1 to avoid decrementing the running + * cpu counter in s390_cpu_reset to a negative number at + * initial ipl */ + env->halted = 1; cpu_reset(CPU(cpu)); + qemu_register_reset(s390_cpu_machine_reset_cb, cpu); } static void s390_cpu_class_init(ObjectClass *oc, void *data) diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c index 94de764..fda9f1f 100644 --- a/target-s390x/kvm.c +++ b/target-s390x/kvm.c @@ -85,7 +85,14 @@ int kvm_arch_init_vcpu(CPUS390XState *env) void kvm_arch_reset_vcpu(CPUS390XState *env) { - /* FIXME: add code to reset vcpu. */ + /* The initial reset call is needed here to reset in-kernel + * vcpu data that we can't access directly from QEMU + * (i.e. with older kernels which don't support sync_regs/ONE_REG). + * Before this ioctl cpu_synchronize_state() is called in common kvm + * code (kvm-all) */ + if (kvm_vcpu_ioctl(env, KVM_S390_INITIAL_RESET, NULL)) { + perror("Can't reset vcpu\n"); + } } int kvm_arch_put_registers(CPUS390XState *env, int level)
Add a CPU reset handler to have all CPUs in a PoP compliant state. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> --- v1 -> v2: * move setting of control registers and psa to s390_cpu_reset and call it from the new s390_machine_cpu_reset_cb() This makes it more similar to how it is done on x86 * in s390_cpu_reset() set env->halted state of cpu after the memset. This is needed to keep our s390_cpu_running counter in sync when s390_cpu_reset is called via the qemu_devices_reset path * set env->halted state in s390_cpu_initfn to 1 to avoid decrementing the cpu counter during first reset --- target-s390x/cpu.c | 31 +++++++++++++++++++++++++++++-- target-s390x/kvm.c | 9 ++++++++- 2 files changed, 37 insertions(+), 3 deletions(-)