mbox

[PULL,00/13] Trivial patches for 2 to 7 November

Message ID 1354880352-9597-1-git-send-email-stefanha@redhat.com
State New
Headers show

Pull-request

git://github.com/stefanha/qemu.git trivial-patches

Message

Stefan Hajnoczi Dec. 7, 2012, 11:38 a.m. UTC
These patches were mostly submitted during the 1.3 hard freeze.  I'll catch up
with the new trivial patches next week.

The following changes since commit 80625b97b52836b944a6438e8e3e9d992e6a00b6:

  xilinx_uartlite: Accept input after rx FIFO pop (2012-12-05 09:20:36 +0100)

are available in the git repository at:

  git://github.com/stefanha/qemu.git trivial-patches

for you to fetch changes up to 654598c944aa31cdbea435bd468055af9c918d16:

  pc_sysfw: Plug memory leak on pc_fw_add_pflash_drv() error path (2012-12-07 12:34:12 +0100)

----------------------------------------------------------------
Markus Armbruster (2):
      Clean up pci_drive_hot_add()'s use of BlockInterfaceType
      pc_sysfw: Plug memory leak on pc_fw_add_pflash_drv() error path

Michal Privoznik (1):
      qemu-options: Fix space at EOL

Petar Jovanovic (2):
      target-mips: Fix incorrect code and test for INSV
      target-mips: Fix incorrect shift for SHILO and SHILOV

Peter Crosthwaite (2):
      sd: Send debug printfery to stderr not stdout
      arm: a9mpcore: remove un-used ptimer_iomem field

Peter Maydell (1):
      configure: Remove stray debug output

Richard Henderson (3):
      target-alpha: Remove t0, t1 from CPUAlphaState
      target-m68k: Remove t1 from CPUM68KState
      target-sparc: Remove t0, t1 from CPUSPARCState

Stefan Weil (4):
      Fix spelling (prefered -> preferred)
      Fix comments (adress -> address, layed -> laid, wierd -> weird)
      s390x: Spelling fixes (endianess -> endianness, occured -> occurred)
      Fix spelling in comments and documentation

 configure                          |  4 +---
 hw/a9mpcore.c                      |  1 -
 hw/device-hotplug.c                | 11 ++++-------
 hw/pc_sysfw.c                      |  4 +++-
 hw/pci-hotplug.c                   |  7 +++----
 hw/s390x/sclp.h                    |  4 ++--
 hw/s390x/sclpconsole.c             |  4 ++--
 hw/sd.c                            |  4 ++--
 hw/usb.h                           |  6 +++---
 net/tap-win32.c                    |  7 ++++---
 qemu-options.hx                    |  2 +-
 slirp/ip_icmp.c                    |  2 +-
 sysemu.h                           |  3 +--
 target-alpha/cpu.h                 |  7 -------
 target-m68k/cpu.h                  |  3 ---
 target-mips/dsp_helper.c           | 19 ++++++++++---------
 target-sparc/cpu.h                 |  1 -
 tcg/tcg.h                          |  4 ++--
 tests/qemu-iotests/iotests.py      |  2 +-
 tests/tcg/mips/mips32-dsp/insv.c   |  2 +-
 tests/tcg/mips/mips32-dsp/shilo.c  | 18 ++++++++++++++++++
 tests/tcg/mips/mips32-dsp/shilov.c | 20 ++++++++++++++++++++
 uri.c                              |  4 ++--
 23 files changed, 81 insertions(+), 58 deletions(-)

Comments

Anthony Liguori Dec. 10, 2012, 4:58 p.m. UTC | #1
Stefan Hajnoczi <stefanha@redhat.com> writes:

> These patches were mostly submitted during the 1.3 hard freeze.  I'll catch up
> with the new trivial patches next week.
>
> The following changes since commit 80625b97b52836b944a6438e8e3e9d992e6a00b6:
>
>   xilinx_uartlite: Accept input after rx FIFO pop (2012-12-05 09:20:36 +0100)
>
> are available in the git repository at:
>
>   git://github.com/stefanha/qemu.git trivial-patches
>

Pulled. Thanks.

Regards,

Anthony Liguori

> for you to fetch changes up to 654598c944aa31cdbea435bd468055af9c918d16:
>
>   pc_sysfw: Plug memory leak on pc_fw_add_pflash_drv() error path (2012-12-07 12:34:12 +0100)
>
> ----------------------------------------------------------------
> Markus Armbruster (2):
>       Clean up pci_drive_hot_add()'s use of BlockInterfaceType
>       pc_sysfw: Plug memory leak on pc_fw_add_pflash_drv() error path
>
> Michal Privoznik (1):
>       qemu-options: Fix space at EOL
>
> Petar Jovanovic (2):
>       target-mips: Fix incorrect code and test for INSV
>       target-mips: Fix incorrect shift for SHILO and SHILOV
>
> Peter Crosthwaite (2):
>       sd: Send debug printfery to stderr not stdout
>       arm: a9mpcore: remove un-used ptimer_iomem field
>
> Peter Maydell (1):
>       configure: Remove stray debug output
>
> Richard Henderson (3):
>       target-alpha: Remove t0, t1 from CPUAlphaState
>       target-m68k: Remove t1 from CPUM68KState
>       target-sparc: Remove t0, t1 from CPUSPARCState
>
> Stefan Weil (4):
>       Fix spelling (prefered -> preferred)
>       Fix comments (adress -> address, layed -> laid, wierd -> weird)
>       s390x: Spelling fixes (endianess -> endianness, occured -> occurred)
>       Fix spelling in comments and documentation
>
>  configure                          |  4 +---
>  hw/a9mpcore.c                      |  1 -
>  hw/device-hotplug.c                | 11 ++++-------
>  hw/pc_sysfw.c                      |  4 +++-
>  hw/pci-hotplug.c                   |  7 +++----
>  hw/s390x/sclp.h                    |  4 ++--
>  hw/s390x/sclpconsole.c             |  4 ++--
>  hw/sd.c                            |  4 ++--
>  hw/usb.h                           |  6 +++---
>  net/tap-win32.c                    |  7 ++++---
>  qemu-options.hx                    |  2 +-
>  slirp/ip_icmp.c                    |  2 +-
>  sysemu.h                           |  3 +--
>  target-alpha/cpu.h                 |  7 -------
>  target-m68k/cpu.h                  |  3 ---
>  target-mips/dsp_helper.c           | 19 ++++++++++---------
>  target-sparc/cpu.h                 |  1 -
>  tcg/tcg.h                          |  4 ++--
>  tests/qemu-iotests/iotests.py      |  2 +-
>  tests/tcg/mips/mips32-dsp/insv.c   |  2 +-
>  tests/tcg/mips/mips32-dsp/shilo.c  | 18 ++++++++++++++++++
>  tests/tcg/mips/mips32-dsp/shilov.c | 20 ++++++++++++++++++++
>  uri.c                              |  4 ++--
>  23 files changed, 81 insertions(+), 58 deletions(-)
>
> -- 
> 1.8.0.1