Message ID | 1354865824-6020-1-git-send-email-voice.shen@atmel.com |
---|---|
State | Accepted |
Delegated to: | Albert ARIBAUD |
Headers | show |
Dear Bo Shen, On 07.12.2012 08:37, Bo Shen wrote: > Add dataflash boot support on at91sam9x5ek board sorry, but this patch do not apply cleanly on top of current u-boot-arm/master. It seems the mmc (SYS_USE_MMC) is missing there. Can you please rebase or provide the other patches? Best regards Andreas Bießmann > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > --- > boards.cfg | 1 + > include/configs/at91sam9x5ek.h | 10 ++++++++++ > 2 files changed, 11 insertions(+) > > diff --git a/boards.cfg b/boards.cfg > index 70a1569..e799d9b 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -97,6 +97,7 @@ at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel > at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH > at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH > at91sam9x5ek_nandflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH > +at91sam9x5ek_dataflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_DATAFLASH > at91sam9x5ek_spiflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_SPIFLASH > at91sam9x5ek_mmc arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_MMC > at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0 > diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h > index 1317582..a034ed0 100644 > --- a/include/configs/at91sam9x5ek.h > +++ b/include/configs/at91sam9x5ek.h > @@ -178,6 +178,16 @@ > #define CONFIG_BOOTCOMMAND "sf probe 0; " \ > "sf read 0x22000000 0x100000 0x300000; " \ > "bootm 0x22000000" > +#elif defined(CONFIG_SYS_USE_DATAFLASH) > +/* bootstrap + u-boot + env + linux in data flash */ > +#define CONFIG_ENV_IS_IN_SPI_FLASH > +#define CONFIG_ENV_OFFSET 0x4200 > +#define CONFIG_ENV_SIZE 0x4200 > +#define CONFIG_ENV_SECT_SIZE 0x210 > +#define CONFIG_ENV_SPI_MAX_HZ 30000000 > +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ > + "sf read 0x22000000 0x84000 0x294000; " \ > + "bootm 0x22000000" > #else /* CONFIG_SYS_USE_MMC */ > /* bootstrap + u-boot + env + linux in mmc */ > #define CONFIG_ENV_IS_IN_MMC >
Dear Bo Shen, On 09.12.2012 22:35, Andreas Bießmann wrote: > Dear Bo Shen, > > On 07.12.2012 08:37, Bo Shen wrote: >> Add dataflash boot support on at91sam9x5ek board > > sorry, but this patch do not apply cleanly on top of current > u-boot-arm/master. It seems the mmc (SYS_USE_MMC) is missing there. Can > you please rebase or provide the other patches? ... got it: http://patchwork.ozlabs.org/patch/196532/ it is awaiting upstream via u-boot-mmc, sorry, this patch has to wait. Best regards Andreas Bießmann
Dear Bo Shen, Albert Aribaud agreed to apply this one to u-boot-arm/master for the upcoming release. On 07.12.2012 08:37, Bo Shen wrote: > Add dataflash boot support on at91sam9x5ek board > > Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com> > --- > boards.cfg | 1 + > include/configs/at91sam9x5ek.h | 10 ++++++++++ > 2 files changed, 11 insertions(+) Best regards Andreas Bießmann
Dear Albert Aribaud, On 09.01.13 17:17, Andreas Bießmann wrote: > Dear Bo Shen, > > Albert Aribaud agreed to apply this one to u-boot-arm/master for the > upcoming release. gentle reminder ... Best regards Andreas Bießmann
Hi Bo, On Fri, 7 Dec 2012 15:37:04 +0800, Bo Shen <voice.shen@atmel.com> wrote: > Add dataflash boot support on at91sam9x5ek board > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > --- > boards.cfg | 1 + > include/configs/at91sam9x5ek.h | 10 ++++++++++ > 2 files changed, 11 insertions(+) > > diff --git a/boards.cfg b/boards.cfg > index 70a1569..e799d9b 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -97,6 +97,7 @@ at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel > at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH > at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH > at91sam9x5ek_nandflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH > +at91sam9x5ek_dataflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_DATAFLASH > at91sam9x5ek_spiflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_SPIFLASH > at91sam9x5ek_mmc arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_MMC > at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0 > diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h > index 1317582..a034ed0 100644 > --- a/include/configs/at91sam9x5ek.h > +++ b/include/configs/at91sam9x5ek.h > @@ -178,6 +178,16 @@ > #define CONFIG_BOOTCOMMAND "sf probe 0; " \ > "sf read 0x22000000 0x100000 0x300000; " \ > "bootm 0x22000000" > +#elif defined(CONFIG_SYS_USE_DATAFLASH) > +/* bootstrap + u-boot + env + linux in data flash */ > +#define CONFIG_ENV_IS_IN_SPI_FLASH > +#define CONFIG_ENV_OFFSET 0x4200 > +#define CONFIG_ENV_SIZE 0x4200 > +#define CONFIG_ENV_SECT_SIZE 0x210 > +#define CONFIG_ENV_SPI_MAX_HZ 30000000 > +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ > + "sf read 0x22000000 0x84000 0x294000; " \ > + "bootm 0x22000000" > #else /* CONFIG_SYS_USE_MMC */ > /* bootstrap + u-boot + env + linux in mmc */ > #define CONFIG_ENV_IS_IN_MMC Applied to u-boot-arm/master, thanks! Amicalement,
diff --git a/boards.cfg b/boards.cfg index 70a1569..e799d9b 100644 --- a/boards.cfg +++ b/boards.cfg @@ -97,6 +97,7 @@ at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH at91sam9x5ek_nandflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH +at91sam9x5ek_dataflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_DATAFLASH at91sam9x5ek_spiflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_SPIFLASH at91sam9x5ek_mmc arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_MMC at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0 diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 1317582..a034ed0 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -178,6 +178,16 @@ #define CONFIG_BOOTCOMMAND "sf probe 0; " \ "sf read 0x22000000 0x100000 0x300000; " \ "bootm 0x22000000" +#elif defined(CONFIG_SYS_USE_DATAFLASH) +/* bootstrap + u-boot + env + linux in data flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x4200 +#define CONFIG_ENV_SIZE 0x4200 +#define CONFIG_ENV_SECT_SIZE 0x210 +#define CONFIG_ENV_SPI_MAX_HZ 30000000 +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ + "sf read 0x22000000 0x84000 0x294000; " \ + "bootm 0x22000000" #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ #define CONFIG_ENV_IS_IN_MMC
Add dataflash boot support on at91sam9x5ek board Signed-off-by: Bo Shen <voice.shen@atmel.com> --- boards.cfg | 1 + include/configs/at91sam9x5ek.h | 10 ++++++++++ 2 files changed, 11 insertions(+)