[01/19] openpic: Remove unused code

The openpic code had a few WIP bits left that nobody reanimated within
the last few years. Remove that code.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 hw/openpic.c |  163 ----------------------------------------------------------
 1 files changed, 0 insertions(+), 163 deletions(-)

Am 08.12.2012 14:44, schrieb Alexander Graf:
> The openpic code had a few WIP bits left that nobody reanimated within
> the last few years. Remove that code.
> 
> Signed-off-by: Alexander Graf <agraf@suse.de>

Reviewed-by: Andreas Färber <afaerber@suse.de>

I'm not aware of any GW80314 users, CC'ing Hervé just to be sure.
The BeBox has an i82378 (sitting on its MPC105), using i8259 PICs.

But even if there were something using them, this is most definitely the
wrong way to model variations nowadays. :)

Alex, did you find out what was broken about it?

Andreas

> ---
>  hw/openpic.c |  163 ----------------------------------------------------------
>  1 files changed, 0 insertions(+), 163 deletions(-)
> 
> diff --git a/hw/openpic.c b/hw/openpic.c
> index 8b3784a..b30c853 100644
> --- a/hw/openpic.c
> +++ b/hw/openpic.c
> @@ -46,27 +46,8 @@
>  #define DPRINTF(fmt, ...) do { } while (0)
>  #endif
>  
> -#define USE_MPCxxx /* Intel model is broken, for now */
> -
> -#if defined (USE_INTEL_GW80314)
> -/* Intel GW80314 I/O Companion chip */
> -
> -#define MAX_CPU     4
> -#define MAX_IRQ    32
> -#define MAX_DBL     4
> -#define MAX_MBX     4
> -#define MAX_TMR     4
> -#define VECTOR_BITS 8
> -#define MAX_IPI     4
> -
> -#define VID (0x00000000)
> -
> -#elif defined(USE_MPCxxx)
> -
>  #define MAX_CPU    15
>  #define MAX_IRQ   128
> -#define MAX_DBL     0
> -#define MAX_MBX     0
>  #define MAX_TMR     4
>  #define VECTOR_BITS 8
>  #define MAX_IPI     4
> @@ -149,12 +130,6 @@ enum mpic_ide_bits {
>      IDR_P0     = 0,
>  };
>  
> -#else
> -#error "Please select which OpenPic implementation is to be emulated"
> -#endif
> -
> -#define OPENPIC_PAGE_SIZE 4096
> -
>  #define BF_WIDTH(_bits_) \
>  (((_bits_) + (sizeof(uint32_t) * 8) - 1) / (sizeof(uint32_t) * 8))
>  
> @@ -250,19 +225,6 @@ typedef struct openpic_t {
>          uint32_t ticc;  /* Global timer current count register */
>          uint32_t tibc;  /* Global timer base count register */
>      } timers[MAX_TMR];
> -#if MAX_DBL > 0
> -    /* Doorbell registers */
> -    uint32_t dar;        /* Doorbell activate register */
> -    struct {
> -        uint32_t dmr;    /* Doorbell messaging register */
> -    } doorbells[MAX_DBL];
> -#endif
> -#if MAX_MBX > 0
> -    /* Mailbox registers */
> -    struct {
> -        uint32_t mbr;    /* Mailbox register */
> -    } mailboxes[MAX_MAILBOXES];
> -#endif
>      /* IRQ out is used when in bypass mode (not implemented) */
>      qemu_irq irq_out;
>      int max_irq;
> @@ -470,19 +432,6 @@ static void openpic_reset (void *opaque)
>          opp->timers[i].ticc = 0x00000000;
>          opp->timers[i].tibc = 0x80000000;
>      }
> -    /* Initialise doorbells */
> -#if MAX_DBL > 0
> -    opp->dar = 0x00000000;
> -    for (i = 0; i < MAX_DBL; i++) {
> -        opp->doorbells[i].dmr  = 0x00000000;
> -    }
> -#endif
> -    /* Initialise mailboxes */
> -#if MAX_MBX > 0
> -    for (i = 0; i < MAX_MBX; i++) { /* ? */
> -        opp->mailboxes[i].mbr   = 0x00000000;
> -    }
> -#endif
>      /* Go out of RESET state */
>      opp->glbc = 0x00000000;
>  }
> @@ -518,84 +467,6 @@ static inline void write_IRQreg_ipvp(openpic_t *opp, int n_IRQ, uint32_t val)
>              opp->src[n_IRQ].ipvp);
>  }
>  
> -#if 0 // Code provision for Intel model
> -#if MAX_DBL > 0
> -static uint32_t read_doorbell_register (openpic_t *opp,
> -                                        int n_dbl, uint32_t offset)
> -{
> -    uint32_t retval;
> -
> -    switch (offset) {
> -    case DBL_IPVP_OFFSET:
> -        retval = read_IRQreg_ipvp(opp, IRQ_DBL0 + n_dbl);
> -        break;
> -    case DBL_IDE_OFFSET:
> -        retval = read_IRQreg_ide(opp, IRQ_DBL0 + n_dbl);
> -        break;
> -    case DBL_DMR_OFFSET:
> -        retval = opp->doorbells[n_dbl].dmr;
> -        break;
> -    }
> -
> -    return retval;
> -}
> -
> -static void write_doorbell_register (penpic_t *opp, int n_dbl,
> -                                     uint32_t offset, uint32_t value)
> -{
> -    switch (offset) {
> -    case DBL_IVPR_OFFSET:
> -        write_IRQreg_ipvp(opp, IRQ_DBL0 + n_dbl, value);
> -        break;
> -    case DBL_IDE_OFFSET:
> -        write_IRQreg_ide(opp, IRQ_DBL0 + n_dbl, value);
> -        break;
> -    case DBL_DMR_OFFSET:
> -        opp->doorbells[n_dbl].dmr = value;
> -        break;
> -    }
> -}
> -#endif
> -
> -#if MAX_MBX > 0
> -static uint32_t read_mailbox_register (openpic_t *opp,
> -                                       int n_mbx, uint32_t offset)
> -{
> -    uint32_t retval;
> -
> -    switch (offset) {
> -    case MBX_MBR_OFFSET:
> -        retval = opp->mailboxes[n_mbx].mbr;
> -        break;
> -    case MBX_IVPR_OFFSET:
> -        retval = read_IRQreg_ipvp(opp, IRQ_MBX0 + n_mbx);
> -        break;
> -    case MBX_DMR_OFFSET:
> -        retval = read_IRQreg_ide(opp, IRQ_MBX0 + n_mbx);
> -        break;
> -    }
> -
> -    return retval;
> -}
> -
> -static void write_mailbox_register (openpic_t *opp, int n_mbx,
> -                                    uint32_t address, uint32_t value)
> -{
> -    switch (offset) {
> -    case MBX_MBR_OFFSET:
> -        opp->mailboxes[n_mbx].mbr = value;
> -        break;
> -    case MBX_IVPR_OFFSET:
> -        write_IRQreg_ipvp(opp, IRQ_MBX0 + n_mbx, value);
> -        break;
> -    case MBX_DMR_OFFSET:
> -        write_IRQreg_ide(opp, IRQ_MBX0 + n_mbx, value);
> -        break;
> -    }
> -}
> -#endif
> -#endif /* 0 : Code provision for Intel model */
> -
>  static void openpic_gbl_write (void *opaque, hwaddr addr, uint32_t val)
>  {
>      openpic_t *opp = opaque;
> @@ -841,7 +712,6 @@ static void openpic_cpu_write_internal(void *opaque, hwaddr addr,
>      dst = &opp->dst[idx];
>      addr &= 0xFF0;
>      switch (addr) {
> -#if MAX_IPI > 0
>      case 0x40: /* IPIDR */
>      case 0x50:
>      case 0x60:
> @@ -853,7 +723,6 @@ static void openpic_cpu_write_internal(void *opaque, hwaddr addr,
>          openpic_set_irq(opp, opp->irq_ipi0 + idx, 1);
>          openpic_set_irq(opp, opp->irq_ipi0 + idx, 0);
>          break;
> -#endif
>      case 0x80: /* PCTP */
>          dst->pctp = val & 0x0000000F;
>          break;
> @@ -1109,20 +978,6 @@ static void openpic_save(QEMUFile* f, void *opaque)
>          qemu_put_be32s(f, &opp->timers[i].tibc);
>      }
>  
> -#if MAX_DBL > 0
> -    qemu_put_be32s(f, &opp->dar);
> -
> -    for (i = 0; i < MAX_DBL; i++) {
> -        qemu_put_be32s(f, &opp->doorbells[i].dmr);
> -    }
> -#endif
> -
> -#if MAX_MBX > 0
> -    for (i = 0; i < MAX_MAILBOXES; i++) {
> -        qemu_put_be32s(f, &opp->mailboxes[i].mbr);
> -    }
> -#endif
> -
>      pci_device_save(&opp->pci_dev, f);
>  }
>  
> @@ -1176,20 +1031,6 @@ static int openpic_load(QEMUFile* f, void *opaque, int version_id)
>          qemu_get_be32s(f, &opp->timers[i].tibc);
>      }
>  
> -#if MAX_DBL > 0
> -    qemu_get_be32s(f, &opp->dar);
> -
> -    for (i = 0; i < MAX_DBL; i++) {
> -        qemu_get_be32s(f, &opp->doorbells[i].dmr);
> -    }
> -#endif
> -
> -#if MAX_MBX > 0
> -    for (i = 0; i < MAX_MAILBOXES; i++) {
> -        qemu_get_be32s(f, &opp->mailboxes[i].mbr);
> -    }
> -#endif
> -
>      return pci_device_load(&opp->pci_dev, f);
>  }
>  
> @@ -1222,11 +1063,7 @@ qemu_irq *openpic_init (MemoryRegion **pmem, int nb_cpus,
>      for (; i < OPENPIC_IRQ_TIM0; i++) {
>          opp->src[i].type = IRQ_SPECIAL;
>      }
> -#if MAX_IPI > 0
>      m = OPENPIC_IRQ_IPI0;
> -#else
> -    m = OPENPIC_IRQ_DBL0;
> -#endif
>      for (; i < m; i++) {
>          opp->src[i].type = IRQ_TIMER;
>      }
>

On 08.12.2012, at 16:12, Andreas Färber wrote:

> Am 08.12.2012 14:44, schrieb Alexander Graf:
>> The openpic code had a few WIP bits left that nobody reanimated within
>> the last few years. Remove that code.
>> 
>> Signed-off-by: Alexander Graf <agraf@suse.de>
> 
> Reviewed-by: Andreas Färber <afaerber@suse.de>
> 
> I'm not aware of any GW80314 users, CC'ing Hervé just to be sure.
> The BeBox has an i82378 (sitting on its MPC105), using i8259 PICs.
> 
> But even if there were something using them, this is most definitely the
> wrong way to model variations nowadays. :)
> 
> Alex, did you find out what was broken about it?

I don't even know what model was supposed to ever use this. IIUC most of that code was for the Intel OpenPIC flavor (whichever one that is). So it's really more about untestable code rather than it being broken.

I'd say if anyone wants to introduce a board that requires these bits, I'm more than happy to see them added back in in a properly modeled way :)


Alex

Andreas Färber a écrit :
> Am 08.12.2012 14:44, schrieb Alexander Graf:
>> The openpic code had a few WIP bits left that nobody reanimated within
>> the last few years. Remove that code.
>>
>> Signed-off-by: Alexander Graf <agraf@suse.de>
> 
> Reviewed-by: Andreas Färber <afaerber@suse.de>
> 
> I'm not aware of any GW80314 users, CC'ing Hervé just to be sure.
> The BeBox has an i82378 (sitting on its MPC105), using i8259 PICs.
> 
> But even if there were something using them, this is most definitely the
> wrong way to model variations nowadays. :)
> 
> Alex, did you find out what was broken about it?
> 
> Andreas
> 

Acked-by: Hervé Poussineau <hpoussin@reactos.org>