Message ID | 20121127090356.GA25658@core.coreip.homeip.net |
---|---|
State | New |
Headers | show |
On Tue, Nov 27, 2012 at 01:03:56AM -0800, Dmitry Torokhov wrote: > The default implementation matches exactly our custom one so we can switch > to using the default one. As a bonus the driver will take care of setting > GPIO line for us. > > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Eric, Sascha, could I get a formal ack on this one please ? > --- > > Adjusted to use IMX_GPIO_NR() macro. > > arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 19 +------------------ > 1 file changed, 1 insertion(+), 18 deletions(-) > > diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c > index 98aef57..f361143 100644 > --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c > +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c > @@ -238,24 +238,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { > .flags = IMXUART_HAVE_RTSCTS, > }; > > -#define ADS7846_PENDOWN (GPIO_PORTD | 25) > - > -static void __maybe_unused ads7846_dev_init(void) > -{ > - if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { > - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); > - return; > - } > - gpio_direction_input(ADS7846_PENDOWN); > -} > - > -static int ads7846_get_pendown_state(void) > -{ > - return !gpio_get_value(ADS7846_PENDOWN); > -} > - > static struct ads7846_platform_data ads7846_config __initdata = { > - .get_pendown_state = ads7846_get_pendown_state, > + .gpio_pendown = IMX_GPIO_NR(4, 25), > .keep_vref_on = 1, > }; > > @@ -323,7 +307,6 @@ void __init eukrea_mbimx27_baseboard_init(void) > || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) > /* ADS7846 Touchscreen controller init */ > mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN); > - ads7846_dev_init(); > #endif > > /* SPI_CS0 init */
Le Tue, 4 Dec 2012 13:09:22 -0800, Dmitry Torokhov <dmitry.torokhov@gmail.com> a écrit : > On Tue, Nov 27, 2012 at 01:03:56AM -0800, Dmitry Torokhov wrote: > > The default implementation matches exactly our custom one so we can switch > > to using the default one. As a bonus the driver will take care of setting > > GPIO line for us. > > > > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > > Eric, Sascha, could I get a formal ack on this one please ? > Acked-by: Eric Bénard <eric@eukrea.com>
On Tue, Nov 27, 2012 at 01:03:56AM -0800, Dmitry Torokhov wrote: > The default implementation matches exactly our custom one so we can switch > to using the default one. As a bonus the driver will take care of setting > GPIO line for us. > > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Applied, thanks Sascha > --- > > Adjusted to use IMX_GPIO_NR() macro. > > arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 19 +------------------ > 1 file changed, 1 insertion(+), 18 deletions(-) > > diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c > index 98aef57..f361143 100644 > --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c > +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c > @@ -238,24 +238,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { > .flags = IMXUART_HAVE_RTSCTS, > }; > > -#define ADS7846_PENDOWN (GPIO_PORTD | 25) > - > -static void __maybe_unused ads7846_dev_init(void) > -{ > - if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { > - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); > - return; > - } > - gpio_direction_input(ADS7846_PENDOWN); > -} > - > -static int ads7846_get_pendown_state(void) > -{ > - return !gpio_get_value(ADS7846_PENDOWN); > -} > - > static struct ads7846_platform_data ads7846_config __initdata = { > - .get_pendown_state = ads7846_get_pendown_state, > + .gpio_pendown = IMX_GPIO_NR(4, 25), > .keep_vref_on = 1, > }; > > @@ -323,7 +307,6 @@ void __init eukrea_mbimx27_baseboard_init(void) > || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) > /* ADS7846 Touchscreen controller init */ > mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN); > - ads7846_dev_init(); > #endif > > /* SPI_CS0 init */ >
Hi Sascha, On Sat, Dec 8, 2012 at 9:16 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote: > On Tue, Nov 27, 2012 at 01:03:56AM -0800, Dmitry Torokhov wrote: >> The default implementation matches exactly our custom one so we can switch >> to using the default one. As a bonus the driver will take care of setting >> GPIO line for us. >> >> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > > Applied, thanks Which tree did you apply this against? I cannot see it in git.pengutronix.de. Regards, Fabio Estevam
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 98aef57..f361143 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -238,24 +238,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -#define ADS7846_PENDOWN (GPIO_PORTD | 25) - -static void __maybe_unused ads7846_dev_init(void) -{ - if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - return; - } - gpio_direction_input(ADS7846_PENDOWN); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ADS7846_PENDOWN); -} - static struct ads7846_platform_data ads7846_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, + .gpio_pendown = IMX_GPIO_NR(4, 25), .keep_vref_on = 1, }; @@ -323,7 +307,6 @@ void __init eukrea_mbimx27_baseboard_init(void) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) /* ADS7846 Touchscreen controller init */ mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN); - ads7846_dev_init(); #endif /* SPI_CS0 init */
The default implementation matches exactly our custom one so we can switch to using the default one. As a bonus the driver will take care of setting GPIO line for us. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- Adjusted to use IMX_GPIO_NR() macro. arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-)