| Message ID | 50BCFEB8.2070703@dlhnet.de |
|---|---|
| State | New |
| Headers | show |
Acked-By: ronniesahlberg@gmail.com (Ronnie Sahlberg) This verified that the service is actually operational and is much more reliable than TCP-KEEPALIVES. This is the proper way to monitor that the iscsi target is alive. We should as a later patch add the ability to configure this via the qemu config file instead of using hardcoded values. regards ronnie sahlberg On Mon, Dec 3, 2012 at 11:34 AM, Peter Lieven <pl@dlhnet.de> wrote: > This patch will send NOP-Out PDUs every 5 seconds to the iSCSI target. > If a consecutive number of NOP-In replies fail a reconnect is initiated. > iSCSI NOPs help to ensure that the connection to the target is still operational. > This should not, but in reality may be the case even if the TCP connection is still > alive if there are bugs in either the target or the initiator implementation. > > Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> > Signed-off-by: Peter Lieven <pl@kamp.de> > --- > block/iscsi.c | 43 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 43 insertions(+) > > diff --git a/block/iscsi.c b/block/iscsi.c > index d0b1a10..fab4c8b 100644 > --- a/block/iscsi.c > +++ b/block/iscsi.c > @@ -47,6 +47,9 @@ typedef struct IscsiLun { > int block_size; > uint64_t num_blocks; > int events; > + > + QEMUTimer *nop_timer; > + int nops_in_flight; > } IscsiLun; > > typedef struct IscsiAIOCB { > @@ -72,6 +75,9 @@ struct IscsiTask { > int complete; > }; > > +#define NOP_INTERVAL 5000 > +#define MAX_NOP_FAILURES 3 > + > static void > iscsi_bh_cb(void *p) > { > @@ -925,6 +931,35 @@ static char *parse_initiator_name(const char *target) > } > } > > +static void iscsi_nop_cb(struct iscsi_context *iscsi, int status, void *command_data, void *private_data) > +{ > + IscsiLun *iscsilun = private_data; > + > + if (iscsilun) { > + iscsilun->nops_in_flight = 0; > + } > +} > + > +static void iscsi_nop_timed_event(void *opaque) > +{ > + IscsiLun *iscsilun = opaque; > + > + if (iscsilun->nops_in_flight > MAX_NOP_FAILURES) { > + error_report("iSCSI: NOP timeout. Reconnecting..."); > + iscsi_reconnect(iscsilun->iscsi); > + iscsilun->nops_in_flight = 0; > + } > + > + if (iscsi_nop_out_async(iscsilun->iscsi, iscsi_nop_cb, NULL, 0, iscsilun) != 0) { > + error_report("iSCSI: failed to sent NOP-Out. Disabling NOP messages."); > + return; > + } > + > + qemu_mod_timer(iscsilun->nop_timer, qemu_get_clock_ms(rt_clock) + NOP_INTERVAL); > + iscsi_set_events(iscsilun); > + iscsilun->nops_in_flight++; > +} > + > /* > * We support iscsi url's on the form > * iscsi://[<username>%<password>@]<host>[:<port>]/<targetname>/<lun> > @@ -1036,6 +1071,10 @@ static int iscsi_open(BlockDriverState *bs, const char *filename, int flags) > > ret = 0; > > + /* Set up a timer for sending out iSCSI NOPs */ > + iscsilun->nop_timer = qemu_new_timer_ms(rt_clock, iscsi_nop_timed_event, iscsilun); > + qemu_mod_timer(iscsilun->nop_timer, qemu_get_clock_ms(rt_clock) + NOP_INTERVAL); > + > out: > if (initiator_name != NULL) { > g_free(initiator_name); > @@ -1058,6 +1097,10 @@ static void iscsi_close(BlockDriverState *bs) > IscsiLun *iscsilun = bs->opaque; > struct iscsi_context *iscsi = iscsilun->iscsi; > > + if (iscsilun->nop_timer) { > + qemu_del_timer(iscsilun->nop_timer); > + qemu_free_timer(iscsilun->nop_timer); > + } > qemu_aio_set_fd_handler(iscsi_get_fd(iscsi), NULL, NULL, NULL, NULL); > iscsi_destroy_context(iscsi); > memset(iscsilun, 0, sizeof(IscsiLun)); > -- > 1.7.9.5 > >
On 04.12.2012 06:03, ronnie sahlberg wrote: > Acked-By: ronniesahlberg@gmail.com (Ronnie Sahlberg) > > > This verified that the service is actually operational and is much > more reliable than TCP-KEEPALIVES. > This is the proper way to monitor that the iscsi target is alive. Yes, especially because (at least under linux) keepalives are only send if the output buffer is empty. I have added tcp user timeout option earlier, but its timeout is not as reliable as the NOPs. > > We should as a later patch add the ability to configure this via the > qemu config file instead of using hardcoded values. Of course, but I can report from several hundred connections that I did not have any false positives during the last weeks with that values. But this might depend on the target that is used. I have one concern where I would appreciate feedback: Is the qemu timer fired in the same thread as libiscsi is running? Otherwise the iscsi_nop_timed_event() cound interfere with an ongoing reconnect that has been inititated by libiscsi (if it detects the broken connection earlier). Peter > > > regards > ronnie sahlberg > > > On Mon, Dec 3, 2012 at 11:34 AM, Peter Lieven <pl@dlhnet.de> wrote: >> This patch will send NOP-Out PDUs every 5 seconds to the iSCSI target. >> If a consecutive number of NOP-In replies fail a reconnect is initiated. >> iSCSI NOPs help to ensure that the connection to the target is still operational. >> This should not, but in reality may be the case even if the TCP connection is still >> alive if there are bugs in either the target or the initiator implementation. >> >> Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> >> Signed-off-by: Peter Lieven <pl@kamp.de> >> --- >> block/iscsi.c | 43 +++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 43 insertions(+) >> >> diff --git a/block/iscsi.c b/block/iscsi.c >> index d0b1a10..fab4c8b 100644 >> --- a/block/iscsi.c >> +++ b/block/iscsi.c >> @@ -47,6 +47,9 @@ typedef struct IscsiLun { >> int block_size; >> uint64_t num_blocks; >> int events; >> + >> + QEMUTimer *nop_timer; >> + int nops_in_flight; >> } IscsiLun; >> >> typedef struct IscsiAIOCB { >> @@ -72,6 +75,9 @@ struct IscsiTask { >> int complete; >> }; >> >> +#define NOP_INTERVAL 5000 >> +#define MAX_NOP_FAILURES 3 >> + >> static void >> iscsi_bh_cb(void *p) >> { >> @@ -925,6 +931,35 @@ static char *parse_initiator_name(const char *target) >> } >> } >> >> +static void iscsi_nop_cb(struct iscsi_context *iscsi, int status, void *command_data, void *private_data) >> +{ >> + IscsiLun *iscsilun = private_data; >> + >> + if (iscsilun) { >> + iscsilun->nops_in_flight = 0; >> + } >> +} >> + >> +static void iscsi_nop_timed_event(void *opaque) >> +{ >> + IscsiLun *iscsilun = opaque; >> + >> + if (iscsilun->nops_in_flight > MAX_NOP_FAILURES) { >> + error_report("iSCSI: NOP timeout. Reconnecting..."); >> + iscsi_reconnect(iscsilun->iscsi); >> + iscsilun->nops_in_flight = 0; >> + } >> + >> + if (iscsi_nop_out_async(iscsilun->iscsi, iscsi_nop_cb, NULL, 0, iscsilun) != 0) { >> + error_report("iSCSI: failed to sent NOP-Out. Disabling NOP messages."); >> + return; >> + } >> + >> + qemu_mod_timer(iscsilun->nop_timer, qemu_get_clock_ms(rt_clock) + NOP_INTERVAL); >> + iscsi_set_events(iscsilun); >> + iscsilun->nops_in_flight++; >> +} >> + >> /* >> * We support iscsi url's on the form >> * iscsi://[<username>%<password>@]<host>[:<port>]/<targetname>/<lun> >> @@ -1036,6 +1071,10 @@ static int iscsi_open(BlockDriverState *bs, const char *filename, int flags) >> >> ret = 0; >> >> + /* Set up a timer for sending out iSCSI NOPs */ >> + iscsilun->nop_timer = qemu_new_timer_ms(rt_clock, iscsi_nop_timed_event, iscsilun); >> + qemu_mod_timer(iscsilun->nop_timer, qemu_get_clock_ms(rt_clock) + NOP_INTERVAL); >> + >> out: >> if (initiator_name != NULL) { >> g_free(initiator_name); >> @@ -1058,6 +1097,10 @@ static void iscsi_close(BlockDriverState *bs) >> IscsiLun *iscsilun = bs->opaque; >> struct iscsi_context *iscsi = iscsilun->iscsi; >> >> + if (iscsilun->nop_timer) { >> + qemu_del_timer(iscsilun->nop_timer); >> + qemu_free_timer(iscsilun->nop_timer); >> + } >> qemu_aio_set_fd_handler(iscsi_get_fd(iscsi), NULL, NULL, NULL, NULL); >> iscsi_destroy_context(iscsi); >> memset(iscsilun, 0, sizeof(IscsiLun)); >> -- >> 1.7.9.5 >> >>
All, please ignore this patch. During testing we found a problem in live usage. We will resubmit once this is fixed. Peter Am 04.12.2012 um 06:03 schrieb ronnie sahlberg: > Acked-By: ronniesahlberg@gmail.com (Ronnie Sahlberg) > > > This verified that the service is actually operational and is much > more reliable than TCP-KEEPALIVES. > This is the proper way to monitor that the iscsi target is alive. > > We should as a later patch add the ability to configure this via the > qemu config file instead of using hardcoded values. > > > regards > ronnie sahlberg > > > On Mon, Dec 3, 2012 at 11:34 AM, Peter Lieven <pl@dlhnet.de> wrote: >> This patch will send NOP-Out PDUs every 5 seconds to the iSCSI target. >> If a consecutive number of NOP-In replies fail a reconnect is initiated. >> iSCSI NOPs help to ensure that the connection to the target is still operational. >> This should not, but in reality may be the case even if the TCP connection is still >> alive if there are bugs in either the target or the initiator implementation. >> >> Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> >> Signed-off-by: Peter Lieven <pl@kamp.de> >> --- >> block/iscsi.c | 43 +++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 43 insertions(+) >> >> diff --git a/block/iscsi.c b/block/iscsi.c >> index d0b1a10..fab4c8b 100644 >> --- a/block/iscsi.c >> +++ b/block/iscsi.c >> @@ -47,6 +47,9 @@ typedef struct IscsiLun { >> int block_size; >> uint64_t num_blocks; >> int events; >> + >> + QEMUTimer *nop_timer; >> + int nops_in_flight; >> } IscsiLun; >> >> typedef struct IscsiAIOCB { >> @@ -72,6 +75,9 @@ struct IscsiTask { >> int complete; >> }; >> >> +#define NOP_INTERVAL 5000 >> +#define MAX_NOP_FAILURES 3 >> + >> static void >> iscsi_bh_cb(void *p) >> { >> @@ -925,6 +931,35 @@ static char *parse_initiator_name(const char *target) >> } >> } >> >> +static void iscsi_nop_cb(struct iscsi_context *iscsi, int status, void *command_data, void *private_data) >> +{ >> + IscsiLun *iscsilun = private_data; >> + >> + if (iscsilun) { >> + iscsilun->nops_in_flight = 0; >> + } >> +} >> + >> +static void iscsi_nop_timed_event(void *opaque) >> +{ >> + IscsiLun *iscsilun = opaque; >> + >> + if (iscsilun->nops_in_flight > MAX_NOP_FAILURES) { >> + error_report("iSCSI: NOP timeout. Reconnecting..."); >> + iscsi_reconnect(iscsilun->iscsi); >> + iscsilun->nops_in_flight = 0; >> + } >> + >> + if (iscsi_nop_out_async(iscsilun->iscsi, iscsi_nop_cb, NULL, 0, iscsilun) != 0) { >> + error_report("iSCSI: failed to sent NOP-Out. Disabling NOP messages."); >> + return; >> + } >> + >> + qemu_mod_timer(iscsilun->nop_timer, qemu_get_clock_ms(rt_clock) + NOP_INTERVAL); >> + iscsi_set_events(iscsilun); >> + iscsilun->nops_in_flight++; >> +} >> + >> /* >> * We support iscsi url's on the form >> * iscsi://[<username>%<password>@]<host>[:<port>]/<targetname>/<lun> >> @@ -1036,6 +1071,10 @@ static int iscsi_open(BlockDriverState *bs, const char *filename, int flags) >> >> ret = 0; >> >> + /* Set up a timer for sending out iSCSI NOPs */ >> + iscsilun->nop_timer = qemu_new_timer_ms(rt_clock, iscsi_nop_timed_event, iscsilun); >> + qemu_mod_timer(iscsilun->nop_timer, qemu_get_clock_ms(rt_clock) + NOP_INTERVAL); >> + >> out: >> if (initiator_name != NULL) { >> g_free(initiator_name); >> @@ -1058,6 +1097,10 @@ static void iscsi_close(BlockDriverState *bs) >> IscsiLun *iscsilun = bs->opaque; >> struct iscsi_context *iscsi = iscsilun->iscsi; >> >> + if (iscsilun->nop_timer) { >> + qemu_del_timer(iscsilun->nop_timer); >> + qemu_free_timer(iscsilun->nop_timer); >> + } >> qemu_aio_set_fd_handler(iscsi_get_fd(iscsi), NULL, NULL, NULL, NULL); >> iscsi_destroy_context(iscsi); >> memset(iscsilun, 0, sizeof(IscsiLun)); >> -- >> 1.7.9.5 >> >>
diff --git a/block/iscsi.c b/block/iscsi.c index d0b1a10..fab4c8b 100644 --- a/block/iscsi.c +++ b/block/iscsi.c @@ -47,6 +47,9 @@ typedef struct IscsiLun { int block_size; uint64_t num_blocks; int events; + + QEMUTimer *nop_timer; + int nops_in_flight; } IscsiLun; typedef struct IscsiAIOCB { @@ -72,6 +75,9 @@ struct IscsiTask { int complete; }; +#define NOP_INTERVAL 5000 +#define MAX_NOP_FAILURES 3 + static void iscsi_bh_cb(void *p) { @@ -925,6 +931,35 @@ static char *parse_initiator_name(const char *target) } } +static void iscsi_nop_cb(struct iscsi_context *iscsi, int status, void *command_data, void *private_data) +{ + IscsiLun *iscsilun = private_data; + + if (iscsilun) { + iscsilun->nops_in_flight = 0; + } +} + +static void iscsi_nop_timed_event(void *opaque) +{ + IscsiLun *iscsilun = opaque; + + if (iscsilun->nops_in_flight > MAX_NOP_FAILURES) { + error_report("iSCSI: NOP timeout. Reconnecting..."); + iscsi_reconnect(iscsilun->iscsi); + iscsilun->nops_in_flight = 0; + } + + if (iscsi_nop_out_async(iscsilun->iscsi, iscsi_nop_cb, NULL, 0, iscsilun) != 0) { + error_report("iSCSI: failed to sent NOP-Out. Disabling NOP messages."); + return; + } + + qemu_mod_timer(iscsilun->nop_timer, qemu_get_clock_ms(rt_clock) + NOP_INTERVAL); + iscsi_set_events(iscsilun); + iscsilun->nops_in_flight++; +} + /* * We support iscsi url's on the form * iscsi://[<username>%<password>@]<host>[:<port>]/<targetname>/<lun> @@ -1036,6 +1071,10 @@ static int iscsi_open(BlockDriverState *bs, const char *filename, int flags) ret = 0; + /* Set up a timer for sending out iSCSI NOPs */ + iscsilun->nop_timer = qemu_new_timer_ms(rt_clock, iscsi_nop_timed_event, iscsilun); + qemu_mod_timer(iscsilun->nop_timer, qemu_get_clock_ms(rt_clock) + NOP_INTERVAL); + out: if (initiator_name != NULL) { g_free(initiator_name); @@ -1058,6 +1097,10 @@ static void iscsi_close(BlockDriverState *bs) IscsiLun *iscsilun = bs->opaque; struct iscsi_context *iscsi = iscsilun->iscsi; + if (iscsilun->nop_timer) { + qemu_del_timer(iscsilun->nop_timer); + qemu_free_timer(iscsilun->nop_timer); + } qemu_aio_set_fd_handler(iscsi_get_fd(iscsi), NULL, NULL, NULL, NULL); iscsi_destroy_context(iscsi); memset(iscsilun, 0, sizeof(IscsiLun));
This patch will send NOP-Out PDUs every 5 seconds to the iSCSI target. If a consecutive number of NOP-In replies fail a reconnect is initiated. iSCSI NOPs help to ensure that the connection to the target is still operational. This should not, but in reality may be the case even if the TCP connection is still alive if there are bugs in either the target or the initiator implementation. Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Peter Lieven <pl@kamp.de> --- block/iscsi.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)