| Message ID | 1354503607-13707-2-git-send-email-josephl@nvidia.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
On 12/02/2012 08:00 PM, Joseph Lo wrote: > The powered-down state of Tegra20 requires power gating both CPU cores. > When the secondary CPU requests to enter powered-down state, it saves > its own contexts and then enters WFI. The Tegra20 had a limition to > power down both CPU cores. The secondary CPU must waits for CPU0 in > powered-down state too. If the secondary CPU be woken up before CPU0 > entering powered-down state, then it needs to restore its CPU states > and waits for next chance. > > Be aware of that, you may see the legacy power state "LP2" in the code > which is exactly the same meaning of "CPU power down". > arch/arm/mach-tegra/sleep-tegra20.S | 145 +++++++++++++++++++++++++++++++++ Is it actually necessary to implement those parts of the code in assembly? It looks like it's mostly just memory read/write and a few barriers, all of which can be coded in regular C or invoked from C. The reason I ask is that we eventually want to remove all hard-coded virtual memory addresses, such as TEGRA_PMC_VIRT, and it'll be a lot easier to access memory relative to a variable base address from C than assembly. Now, perhaps we can solve this later; when we actually try to get this code into drivers/cpuidle/ and remove the hard-coded virtual memory addresses. Still, it'd be great if we didn't have to re-write the code as much (from .S->.c) when making those changes... -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/02/2012 08:00 PM, Joseph Lo wrote: > The powered-down state of Tegra20 requires power gating both CPU cores. > When the secondary CPU requests to enter powered-down state, it saves > its own contexts and then enters WFI. The Tegra20 had a limition to > power down both CPU cores. The secondary CPU must waits for CPU0 in > powered-down state too. If the secondary CPU be woken up before CPU0 > entering powered-down state, then it needs to restore its CPU states > and waits for next chance. > > Be aware of that, you may see the legacy power state "LP2" in the code > which is exactly the same meaning of "CPU power down". > diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S > +/* > + * tegra_pen_lock > + * > + * spinlock implementation with no atomic test-and-set and no coherence > + * using Peterson's algorithm on strongly-ordered registers > + * used to synchronize a cpu waking up from wfi with entering lp2 on idle > + * > + * SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm) A link to a description of that algorithm would be useful. > + * on cpu 0: > + * SCRATCH38 = r2 = flag[0] > + * SCRATCH39 = r3 = flag[1] > + * on cpu1: > + * SCRATCH39 = r2 = flag[1] > + * SCRATCH38 = r3 = flag[0] That implies that r2/r3 are used for different purposes on the 2 CPUs, and/or shadow the values of different registers. However, I see nothing in the code which is conditional on cpu ID. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2012-12-04 at 02:18 +0800, Stephen Warren wrote: > On 12/02/2012 08:00 PM, Joseph Lo wrote: > > The powered-down state of Tegra20 requires power gating both CPU cores. > > When the secondary CPU requests to enter powered-down state, it saves > > its own contexts and then enters WFI. The Tegra20 had a limition to > > power down both CPU cores. The secondary CPU must waits for CPU0 in > > powered-down state too. If the secondary CPU be woken up before CPU0 > > entering powered-down state, then it needs to restore its CPU states > > and waits for next chance. > > > > Be aware of that, you may see the legacy power state "LP2" in the code > > which is exactly the same meaning of "CPU power down". > > > arch/arm/mach-tegra/sleep-tegra20.S | 145 +++++++++++++++++++++++++++++++++ > > Is it actually necessary to implement those parts of the code in > assembly? It looks like it's mostly just memory read/write and a few > barriers, all of which can be coded in regular C or invoked from C. > > The reason I ask is that we eventually want to remove all hard-coded > virtual memory addresses, such as TEGRA_PMC_VIRT, and it'll be a lot > easier to access memory relative to a variable base address from C than > assembly. > > Now, perhaps we can solve this later; when we actually try to get this > code into drivers/cpuidle/ and remove the hard-coded virtual memory > addresses. Still, it'd be great if we didn't have to re-write the code > as much (from .S->.c) when making those changes... OK. Let me think how to do this for both Tegra20 and Tegra30. Thanks, Joseph -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2012-12-04 at 02:31 +0800, Stephen Warren wrote: > On 12/02/2012 08:00 PM, Joseph Lo wrote: > > The powered-down state of Tegra20 requires power gating both CPU cores. > > When the secondary CPU requests to enter powered-down state, it saves > > its own contexts and then enters WFI. The Tegra20 had a limition to > > power down both CPU cores. The secondary CPU must waits for CPU0 in > > powered-down state too. If the secondary CPU be woken up before CPU0 > > entering powered-down state, then it needs to restore its CPU states > > and waits for next chance. > > > > Be aware of that, you may see the legacy power state "LP2" in the code > > which is exactly the same meaning of "CPU power down". > > > diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S > > > +/* > > + * tegra_pen_lock > > + * > > + * spinlock implementation with no atomic test-and-set and no coherence > > + * using Peterson's algorithm on strongly-ordered registers > > + * used to synchronize a cpu waking up from wfi with entering lp2 on idle > > + * > > + * SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm) > > A link to a description of that algorithm would be useful. > This algorithm was very famous. It can be very easy to find on the internet. But if you want the link of the paper, it may not be available. It usually need to access the paper as a member. Can you accept a link from wikipedia? http://en.wikipedia.org/wiki/Peterson's_algorithm#cite_ref-1 > > + * on cpu 0: > > + * SCRATCH38 = r2 = flag[0] > > + * SCRATCH39 = r3 = flag[1] > > + * on cpu1: > > + * SCRATCH39 = r2 = flag[1] > > + * SCRATCH38 = r3 = flag[0] > > That implies that r2/r3 are used for different purposes on the 2 CPUs, > and/or shadow the values of different registers. However, I see nothing > in the code which is conditional on cpu ID. here: + cpu_id r0 + add r1, r3, #PMC_SCRATCH37 + cmp r0, #0 + addeq r2, r3, #PMC_SCRATCH38 + addeq r3, r3, #PMC_SCRATCH39 + addne r2, r3, #PMC_SCRATCH39 + addne r3, r3, #PMC_SCRATCH38 It's proper to say that the SCRATCH38/SCRATCH39 are used for dedicate cpu lock flag on the 2 CPUs. Thanks, Joseph -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/04/2012 12:05 AM, Joseph Lo wrote: > On Tue, 2012-12-04 at 02:31 +0800, Stephen Warren wrote: >> On 12/02/2012 08:00 PM, Joseph Lo wrote: >>> The powered-down state of Tegra20 requires power gating both CPU cores. >>> When the secondary CPU requests to enter powered-down state, it saves >>> its own contexts and then enters WFI. The Tegra20 had a limition to >>> power down both CPU cores. The secondary CPU must waits for CPU0 in >>> powered-down state too. If the secondary CPU be woken up before CPU0 >>> entering powered-down state, then it needs to restore its CPU states >>> and waits for next chance. >>> >>> Be aware of that, you may see the legacy power state "LP2" in the code >>> which is exactly the same meaning of "CPU power down". >> >>> diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S >> >>> +/* >>> + * tegra_pen_lock >>> + * >>> + * spinlock implementation with no atomic test-and-set and no coherence >>> + * using Peterson's algorithm on strongly-ordered registers >>> + * used to synchronize a cpu waking up from wfi with entering lp2 on idle >>> + * >>> + * SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm) >> >> A link to a description of that algorithm would be useful. >> > This algorithm was very famous. It can be very easy to find on the > internet. But if you want the link of the paper, it may not be > available. It usually need to access the paper as a member. > > Can you accept a link from wikipedia? > http://en.wikipedia.org/wiki/Peterson's_algorithm#cite_ref-1 Yes, that's fine (although I'd drop the anchor from the URL; i.e. remove "#cite_ref-1"). >>> + * on cpu 0: >>> + * SCRATCH38 = r2 = flag[0] >>> + * SCRATCH39 = r3 = flag[1] >>> + * on cpu1: >>> + * SCRATCH39 = r2 = flag[1] >>> + * SCRATCH38 = r3 = flag[0] >> >> That implies that r2/r3 are used for different purposes on the 2 CPUs, >> and/or shadow the values of different registers. However, I see nothing >> in the code which is conditional on cpu ID. > > here: > + cpu_id r0 > + add r1, r3, #PMC_SCRATCH37 > + cmp r0, #0 > + addeq r2, r3, #PMC_SCRATCH38 > + addeq r3, r3, #PMC_SCRATCH39 > + addne r2, r3, #PMC_SCRATCH39 > + addne r3, r3, #PMC_SCRATCH38 > It's proper to say that the SCRATCH38/SCRATCH39 are used for dedicate > cpu lock flag on the 2 CPUs. Doh. I overlooked the "cpu_id" invocation. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index d32e8b0..9d59a46 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -22,21 +22,105 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/clockchips.h> #include <asm/cpuidle.h> +#include <asm/proc-fns.h> +#include <asm/suspend.h> +#include <asm/smp_plat.h> + +#include "pm.h" +#include "sleep.h" + +#ifdef CONFIG_PM_SLEEP +static int tegra20_idle_lp2(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index); +#endif static struct cpuidle_driver tegra_idle_driver = { .name = "tegra_idle", .owner = THIS_MODULE, .en_core_tk_irqen = 1, +#ifdef CONFIG_PM_SLEEP + .state_count = 2, +#else .state_count = 1, +#endif .states = { [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), +#ifdef CONFIG_PM_SLEEP + [1] = { + .enter = tegra20_idle_lp2, + .exit_latency = 5000, + .target_residency = 10000, + .power_usage = 0, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "powered-down", + .desc = "CPU power gated", + }, +#endif }, }; static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); +#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_SMP +static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + + smp_wmb(); + + cpu_suspend(0, tegra20_sleep_cpu_secondary_finish); + + tegra20_cpu_clear_resettable(); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + + return true; +} +#else +static inline bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + return true; +} +#endif + +static int __cpuinit tegra20_idle_lp2(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu; + bool entered_lp2 = false; + + local_fiq_disable(); + + tegra_set_cpu_in_lp2(cpu); + cpu_pm_enter(); + + if (cpu == 0) + cpu_do_idle(); + else + entered_lp2 = tegra20_idle_enter_lp2_cpu_1(dev, drv, index); + + cpu_pm_exit(); + tegra_clear_cpu_in_lp2(cpu); + + local_fiq_enable(); + + smp_rmb(); + + return (entered_lp2) ? index : 0; +} +#endif + int __init tegra20_cpuidle_init(void) { int ret; diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 1b11707..db72ea9 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -173,6 +173,8 @@ bool __cpuinit tegra_set_cpu_in_lp2(int phy_cpu_id) if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask)) last_cpu = true; + else if (phy_cpu_id == 1) + tegra20_cpu_set_resettable_soon(); spin_unlock(&tegra_lp2_lock); return last_cpu; diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index 72ce709..dfb2be5 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -21,6 +21,8 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/proc-fns.h> +#include <asm/cp15.h> #include "sleep.h" #include "flowctrl.h" @@ -78,3 +80,146 @@ ENTRY(tegra20_cpu_shutdown) mov pc, lr ENDPROC(tegra20_cpu_shutdown) #endif + +#ifdef CONFIG_PM_SLEEP +/* + * tegra_pen_lock + * + * spinlock implementation with no atomic test-and-set and no coherence + * using Peterson's algorithm on strongly-ordered registers + * used to synchronize a cpu waking up from wfi with entering lp2 on idle + * + * SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm) + * on cpu 0: + * SCRATCH38 = r2 = flag[0] + * SCRATCH39 = r3 = flag[1] + * on cpu1: + * SCRATCH39 = r2 = flag[1] + * SCRATCH38 = r3 = flag[0] + * + * must be called with MMU on + * corrupts r0-r3, r12 + */ +ENTRY(tegra_pen_lock) + mov32 r3, TEGRA_PMC_VIRT + cpu_id r0 + add r1, r3, #PMC_SCRATCH37 + cmp r0, #0 + addeq r2, r3, #PMC_SCRATCH38 + addeq r3, r3, #PMC_SCRATCH39 + addne r2, r3, #PMC_SCRATCH39 + addne r3, r3, #PMC_SCRATCH38 + + mov r12, #1 + str r12, [r2] @ flag[cpu] = 1 + dsb + str r12, [r1] @ !turn = cpu +1: dsb + ldr r12, [r3] + cmp r12, #1 @ flag[!cpu] == 1? + ldreq r12, [r1] + cmpeq r12, r0 @ !turn == cpu? + beq 1b @ while !turn == cpu && flag[!cpu] == 1 + + mov pc, lr @ locked +ENDPROC(tegra_pen_lock) + +ENTRY(tegra_pen_unlock) + dsb + mov32 r3, TEGRA_PMC_VIRT + cpu_id r0 + cmp r0, #0 + addeq r2, r3, #PMC_SCRATCH38 + addne r2, r3, #PMC_SCRATCH39 + mov r12, #0 + str r12, [r2] + mov pc, lr +ENDPROC(tegra_pen_unlock) + +/* + * tegra20_cpu_clear_resettable(void) + * + * Called to clear the "resettable soon" flag in PMC_SCRATCH41 when + * it is expected that the secondary CPU will be idle soon. + */ +ENTRY(tegra20_cpu_clear_resettable) + mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 + mov r12, #CPU_NOT_RESETTABLE + str r12, [r1] + mov pc, lr +ENDPROC(tegra20_cpu_clear_resettable) + +/* + * tegra20_cpu_set_resettable_soon(void) + * + * Called to set the "resettable soon" flag in PMC_SCRATCH41 when + * it is expected that the secondary CPU will be idle soon. + */ +ENTRY(tegra20_cpu_set_resettable_soon) + mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 + mov r12, #CPU_RESETTABLE_SOON + str r12, [r1] + mov pc, lr +ENDPROC(tegra20_cpu_set_resettable_soon) + +/* + * tegra20_sleep_cpu_secondary_finish(unsigned long v2p) + * + * Enters WFI on secondary CPU by exiting coherency. + */ +ENTRY(tegra20_sleep_cpu_secondary_finish) + mrc p15, 0, r11, c1, c0, 1 @ save actlr before exiting coherency + + /* Flush and disable the L1 data cache */ + bl tegra_disable_clean_inv_dcache + + mov32 r0, TEGRA_PMC_VIRT + PMC_SCRATCH41 + mov r3, #CPU_RESETTABLE + str r3, [r0] + + bl cpu_do_idle + + /* + * cpu may be reset while in wfi, which will return through + * tegra_resume to cpu_resume + * or interrupt may wake wfi, which will return here + * cpu state is unchanged - MMU is on, cache is on, coherency + * is off, and the data cache is off + * + * r11 contains the original actlr + */ + + bl tegra_pen_lock + + mov32 r3, TEGRA_PMC_VIRT + add r0, r3, #PMC_SCRATCH41 + mov r3, #CPU_NOT_RESETTABLE + str r3, [r0] + + bl tegra_pen_unlock + + /* Re-enable the data cache */ + mrc p15, 0, r10, c1, c0, 0 + orr r10, r10, #CR_C + mcr p15, 0, r10, c1, c0, 0 + isb + + mcr p15, 0, r11, c1, c0, 1 @ reenable coherency + + /* Invalidate the TLBs & BTAC */ + mov r1, #0 + mcr p15, 0, r1, c8, c3, 0 @ invalidate shared TLBs + mcr p15, 0, r1, c7, c1, 6 @ invalidate shared BTAC + dsb + isb + + /* the cpu was running with coherency disabled, + * caches may be out of date */ + bl v7_flush_kern_cache_louis + + ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys resume fn + mov r0, #0 @ return success + mov sp, r2 @ sp is stored in r2 by __cpu_suspend + ldmfd sp!, {r4 - r11, pc} +ENDPROC(tegra20_sleep_cpu_secondary_finish) +#endif diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 9821ee7..a02f71a 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -25,6 +25,19 @@ + IO_PPSB_VIRT) #define TEGRA_CLK_RESET_VIRT (TEGRA_CLK_RESET_BASE - IO_PPSB_PHYS \ + IO_PPSB_VIRT) +#define TEGRA_PMC_VIRT (TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT) + +/* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */ +#define PMC_SCRATCH37 0x130 +#define PMC_SCRATCH38 0x134 +#define PMC_SCRATCH39 0x138 +#define PMC_SCRATCH41 0x140 + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +#define CPU_RESETTABLE 2 +#define CPU_RESETTABLE_SOON 1 +#define CPU_NOT_RESETTABLE 0 +#endif #ifdef __ASSEMBLY__ /* returns the offset of the flow controller halt register for a cpu */ @@ -104,6 +117,8 @@ exit_l2_resume: .endm #endif /* CONFIG_CACHE_L2X0 */ #else +void tegra_pen_lock(void); +void tegra_pen_unlock(void); void tegra_resume(void); int tegra_sleep_cpu_finish(unsigned long); @@ -115,6 +130,14 @@ static inline void tegra20_hotplug_init(void) {} static inline void tegra30_hotplug_init(void) {} #endif +void tegra20_cpu_clear_resettable(void); +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +void tegra20_cpu_set_resettable_soon(void); +#else +static inline void tegra20_cpu_set_resettable_soon(void) {} +#endif + +int tegra20_sleep_cpu_secondary_finish(unsigned long); int tegra30_sleep_cpu_secondary_finish(unsigned long); void tegra30_tear_down_cpu(void);
The powered-down state of Tegra20 requires power gating both CPU cores. When the secondary CPU requests to enter powered-down state, it saves its own contexts and then enters WFI. The Tegra20 had a limition to power down both CPU cores. The secondary CPU must waits for CPU0 in powered-down state too. If the secondary CPU be woken up before CPU0 entering powered-down state, then it needs to restore its CPU states and waits for next chance. Be aware of that, you may see the legacy power state "LP2" in the code which is exactly the same meaning of "CPU power down". Based on the work by: Colin Cross <ccross@android.com> Gary King <gking@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> --- arch/arm/mach-tegra/cpuidle-tegra20.c | 84 +++++++++++++++++++ arch/arm/mach-tegra/pm.c | 2 + arch/arm/mach-tegra/sleep-tegra20.S | 145 +++++++++++++++++++++++++++++++++ arch/arm/mach-tegra/sleep.h | 23 +++++ 4 files changed, 254 insertions(+), 0 deletions(-)