diff mbox

mtd: gpio-nand: Ability to use driver for configurations without RDY-pin

Message ID 1350454107-3754-1-git-send-email-shc_work@mail.ru
State Accepted
Commit 18afbc54c4944b6c93f3888d97db0d1257a4b5e9
Headers show

Commit Message

Alexander Shiyan Oct. 17, 2012, 6:08 a.m. UTC
In some configurations of "gpio-nand" RDY-pin may be not connected.
This patch allow to use driver for these configurations. In this case
we are assume that device always ready.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 drivers/mtd/nand/gpio.c |   22 +++++++++++++++-------
 1 files changed, 15 insertions(+), 7 deletions(-)

Comments

Artem Bityutskiy Nov. 9, 2012, 3:29 p.m. UTC | #1
On Wed, 2012-10-17 at 10:08 +0400, Alexander Shiyan wrote:
> In some configurations of "gpio-nand" RDY-pin may be not connected.
> This patch allow to use driver for these configurations. In this case
> we are assume that device always ready.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

Pushed to l2-mtd.git, thanks!
diff mbox

Patch

diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index bc73bc5..b1653bf 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -134,7 +134,11 @@  static void gpio_nand_readbuf16(struct mtd_info *mtd, u_char *buf, int len)
 static int gpio_nand_devready(struct mtd_info *mtd)
 {
 	struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
-	return gpio_get_value(gpiomtd->plat.gpio_rdy);
+
+	if (gpio_is_valid(gpiomtd->plat.gpio_rdy))
+		return gpio_get_value(gpiomtd->plat.gpio_rdy);
+
+	return 1;
 }
 
 #ifdef CONFIG_OF
@@ -252,7 +256,8 @@  static int __devexit gpio_nand_remove(struct platform_device *dev)
 	gpio_free(gpiomtd->plat.gpio_nce);
 	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
 		gpio_free(gpiomtd->plat.gpio_nwp);
-	gpio_free(gpiomtd->plat.gpio_rdy);
+	if (gpio_is_valid(gpiomtd->plat.gpio_rdy))
+		gpio_free(gpiomtd->plat.gpio_rdy);
 
 	kfree(gpiomtd);
 
@@ -336,10 +341,12 @@  static int __devinit gpio_nand_probe(struct platform_device *dev)
 	if (ret)
 		goto err_cle;
 	gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
-	ret = gpio_request(gpiomtd->plat.gpio_rdy, "NAND RDY");
-	if (ret)
-		goto err_rdy;
-	gpio_direction_input(gpiomtd->plat.gpio_rdy);
+	if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) {
+		ret = gpio_request(gpiomtd->plat.gpio_rdy, "NAND RDY");
+		if (ret)
+			goto err_rdy;
+		gpio_direction_input(gpiomtd->plat.gpio_rdy);
+	}
 
 
 	this->IO_ADDR_W  = this->IO_ADDR_R;
@@ -386,7 +393,8 @@  static int __devinit gpio_nand_probe(struct platform_device *dev)
 err_wp:
 	if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
 		gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
-	gpio_free(gpiomtd->plat.gpio_rdy);
+	if (gpio_is_valid(gpiomtd->plat.gpio_rdy))
+		gpio_free(gpiomtd->plat.gpio_rdy);
 err_rdy:
 	gpio_free(gpiomtd->plat.gpio_cle);
 err_cle: