| Message ID | 1351668471-31436-4-git-send-email-tangchen@cn.fujitsu.com |
|---|---|
| State | Not Applicable |
| Headers | show |
On Wed, 2012-10-31 at 15:27 +0800, Tang Chen wrote: > This patch introduces a new function container_device_remove() to do > the container hot-remove job. It works like the following: > > 1. call acpi_bus_trim(device, 0) to stop the container device, > which means to unbind ACPI drivers first before remove devices. > (This feature is introduced by Lu Yinghai: > http://www.spinics.net/lists/linux-pci/msg17667.html) > 2. generate the KOBJ_OFFLINE uevent. (Did I do this correct ?) > 3. call acpi_bus_hot_remove_device(), which will call acpi_bus_trim(device, 1) > to remove the container. > > This patch is based on Lu Yinghai's work. > git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git for-pci-split-pci-root-hp-2 > > Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> > --- > drivers/acpi/container.c | 63 ++++++++++++++++++++++++++++++++++++++------- > 1 files changed, 53 insertions(+), 10 deletions(-) > > diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c > index a10eee6..4abec98 100644 > --- a/drivers/acpi/container.c > +++ b/drivers/acpi/container.c > @@ -166,6 +166,32 @@ static int container_device_add(struct acpi_device **device, acpi_handle handle) > return result; > } > > +static int container_device_remove(struct acpi_device *device) > +{ > + int ret; > + struct acpi_eject_event *ej_event; > + > + /* stop container device at first */ > + ret = acpi_bus_trim(device, 0); > + pr_debug("acpi_bus_trim stop return %x\n", ret); > + if (ret) > + return ret; > + > + /* send the uevent before remove the device */ > + kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE); > + > + ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL); > + if (!ej_event) > + return -ENOMEM; > + > + ej_event->device = device; > + ej_event->event = ACPI_NOTIFY_EJECT_REQUEST; > + > + acpi_bus_hot_remove_device(ej_event); Hi Tang, Rafael pointed out in my CPU hot-remove patch that acpi_bus_hot_remove_device() was not exported for modules. Looks like you have the same problem here. FYI, I just sent the following patch that exports acpi_bus_hot_remove_device() and acpi_os_hotplug_execute(). https://lkml.org/lkml/2012/11/1/225 Thanks, -Toshi -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11/02/2012 12:43 AM, Toshi Kani wrote: > > Hi Tang, > > Rafael pointed out in my CPU hot-remove patch that > acpi_bus_hot_remove_device() was not exported for modules. Looks like > you have the same problem here. FYI, I just sent the following patch > that exports acpi_bus_hot_remove_device() and acpi_os_hotplug_execute(). > > https://lkml.org/lkml/2012/11/1/225 > Hi Toshi, I see. Thanks for the info. :) Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c index a10eee6..4abec98 100644 --- a/drivers/acpi/container.c +++ b/drivers/acpi/container.c @@ -166,6 +166,32 @@ static int container_device_add(struct acpi_device **device, acpi_handle handle) return result; } +static int container_device_remove(struct acpi_device *device) +{ + int ret; + struct acpi_eject_event *ej_event; + + /* stop container device at first */ + ret = acpi_bus_trim(device, 0); + pr_debug("acpi_bus_trim stop return %x\n", ret); + if (ret) + return ret; + + /* send the uevent before remove the device */ + kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE); + + ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL); + if (!ej_event) + return -ENOMEM; + + ej_event->device = device; + ej_event->event = ACPI_NOTIFY_EJECT_REQUEST; + + acpi_bus_hot_remove_device(ej_event); + + return 0; +} + /* This function is of type acpi_osd_exec_callback */ static void _container_notify_cb(void *context) { @@ -182,6 +208,9 @@ static void _container_notify_cb(void *context) handle = cb_data->handle; type = cb_data->type; + present = is_device_present(handle); + status = acpi_bus_get_device(handle, &device); + switch (type) { case ACPI_NOTIFY_BUS_CHECK: /* Fall through */ @@ -190,13 +219,16 @@ static void _container_notify_cb(void *context) (type == ACPI_NOTIFY_BUS_CHECK) ? "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"); - present = is_device_present(handle); - status = acpi_bus_get_device(handle, &device); if (!present) { if (ACPI_SUCCESS(status)) { /* device exist and this is a remove request */ - device->flags.eject_pending = 1; - kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE); + result = container_device_remove(device); + if (result) { + dev_warn(&device->dev, "%s: Failed to " + "remove container\n", + __func__); + break; + } goto out; } break; @@ -207,7 +239,9 @@ static void _container_notify_cb(void *context) result = container_device_add(&device, handle); if (result) { - printk(KERN_WARNING "Failed to add container\n"); + dev_warn(&device->dev, + "%s: Failed to add container\n", + __func__); break; } @@ -216,12 +250,21 @@ static void _container_notify_cb(void *context) break; case ACPI_NOTIFY_EJECT_REQUEST: - if (!acpi_bus_get_device(handle, &device) && device) { - device->flags.eject_pending = 1; - kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE); - goto out; + printk(KERN_WARNING "Container driver received %s event\n", + "ACPI_NOTIFY_EJECT_REQUEST"); + + if (!present || ACPI_FAILURE(status) || !device) + break; + + result = container_device_remove(device); + if (result) { + dev_warn(&device->dev, + "%s: Failed to remove container\n", + __func__); + break; } - break; + + goto out; default: /* non-hotplug event; possibly handled by other handler */
This patch introduces a new function container_device_remove() to do the container hot-remove job. It works like the following: 1. call acpi_bus_trim(device, 0) to stop the container device, which means to unbind ACPI drivers first before remove devices. (This feature is introduced by Lu Yinghai: http://www.spinics.net/lists/linux-pci/msg17667.html) 2. generate the KOBJ_OFFLINE uevent. (Did I do this correct ?) 3. call acpi_bus_hot_remove_device(), which will call acpi_bus_trim(device, 1) to remove the container. This patch is based on Lu Yinghai's work. git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git for-pci-split-pci-root-hp-2 Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> --- drivers/acpi/container.c | 63 ++++++++++++++++++++++++++++++++++++++------- 1 files changed, 53 insertions(+), 10 deletions(-)