| Message ID | 1349364121-29823-1-git-send-email-peter.maydell@linaro.org |
|---|---|
| State | New |
| Headers | show |
Ping! -- PMM On 4 October 2012 16:22, Peter Maydell <peter.maydell@linaro.org> wrote: > Update the -help output and documentation so that it recommends > 'help' rather than '?' for the various "list valid values for this > option" cases. '?' is deprecated (as it can fail confusingly if > not quoted), so it's better to steer users towards 'help'. ('?' > still works, for backwards compatibility.) > > This is the -help option part of the change otherwise done in > commit c8057f9, since we are now past release 1.2 and free to > change our help text without worrying about breaking libvirt. > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org> > --- > v1->v2: added quoting to '-foo help' in various places > (I don't entirely agree with Eric about this but it will > probably help to unblock this patch) > > NB: v1 of this patch got a: > Signed-off-by: Daniel P. Berrange <berrange@redhat.com> > but I'm guessing you meant that to be a Reviewed-by or Acked-by ? > > qemu-options.hx | 38 +++++++++++++++++--------------------- > 1 file changed, 17 insertions(+), 21 deletions(-) > > diff --git a/qemu-options.hx b/qemu-options.hx > index 7d97f96..46f0539 100644 > --- a/qemu-options.hx > +++ b/qemu-options.hx > @@ -6,10 +6,6 @@ HXCOMM construct option structures, enums and help message for specified > HXCOMM architectures. > HXCOMM HXCOMM can be used for comments, discarded from both texi and C > > -HXCOMM TODO : when we are able to change -help output without breaking > -HXCOMM libvirt we should update the help options which refer to -cpu ?, > -HXCOMM -driver ?, etc to use the preferred -cpu help etc instead. > - > DEFHEADING(Standard options:) > STEXI > @table @option > @@ -33,7 +29,7 @@ ETEXI > > DEF("machine", HAS_ARG, QEMU_OPTION_machine, \ > "-machine [type=]name[,prop[=value][,...]]\n" > - " selects emulated machine (-machine ? for list)\n" > + " selects emulated machine ('-machine help' for list)\n" > " property accel=accel1[:accel2[:...]] selects accelerator\n" > " supported accelerators are kvm, xen, tcg (default: tcg)\n" > " kernel_irqchip=on|off controls accelerated irqchip support\n" > @@ -44,7 +40,7 @@ DEF("machine", HAS_ARG, QEMU_OPTION_machine, \ > STEXI > @item -machine [type=]@var{name}[,prop=@var{value}[,...]] > @findex -machine > -Select the emulated machine by @var{name}. Use @code{-machine ?} to list > +Select the emulated machine by @var{name}. Use @code{-machine help} to list > available machines. Supported machine properties are: > @table @option > @item accel=@var{accels1}[:@var{accels2}[:...]] > @@ -69,11 +65,11 @@ HXCOMM Deprecated by -machine > DEF("M", HAS_ARG, QEMU_OPTION_M, "", QEMU_ARCH_ALL) > > DEF("cpu", HAS_ARG, QEMU_OPTION_cpu, > - "-cpu cpu select CPU (-cpu ? for list)\n", QEMU_ARCH_ALL) > + "-cpu cpu select CPU ('-cpu help' for list)\n", QEMU_ARCH_ALL) > STEXI > @item -cpu @var{model} > @findex -cpu > -Select CPU model (-cpu ? for list and additional feature selection) > +Select CPU model (@code{-cpu help} for list and additional feature selection) > ETEXI > > DEF("smp", HAS_ARG, QEMU_OPTION_smp, > @@ -463,12 +459,12 @@ ETEXI > DEF("soundhw", HAS_ARG, QEMU_OPTION_soundhw, > "-soundhw c1,... enable audio support\n" > " and only specified sound cards (comma separated list)\n" > - " use -soundhw ? to get the list of supported cards\n" > - " use -soundhw all to enable all of them\n", QEMU_ARCH_ALL) > + " use '-soundhw help' to get the list of supported cards\n" > + " use '-soundhw all' to enable all of them\n", QEMU_ARCH_ALL) > STEXI > @item -soundhw @var{card1}[,@var{card2},...] or -soundhw all > @findex -soundhw > -Enable audio and selected sound hardware. Use ? to print all > +Enable audio and selected sound hardware. Use 'help' to print all > available sound hardware. > > @example > @@ -477,7 +473,7 @@ qemu-system-i386 -soundhw es1370 disk.img > qemu-system-i386 -soundhw ac97 disk.img > qemu-system-i386 -soundhw hda disk.img > qemu-system-i386 -soundhw all disk.img > -qemu-system-i386 -soundhw ? > +qemu-system-i386 -soundhw help > @end example > > Note that Linux's i810_audio OSS kernel (for AC97) module might > @@ -566,16 +562,16 @@ DEF("device", HAS_ARG, QEMU_OPTION_device, > "-device driver[,prop[=value][,...]]\n" > " add device (based on driver)\n" > " prop=value,... sets driver properties\n" > - " use -device ? to print all possible drivers\n" > - " use -device driver,? to print all possible properties\n", > + " use '-device help' to print all possible drivers\n" > + " use '-device driver,help' to print all possible properties\n", > QEMU_ARCH_ALL) > STEXI > @item -device @var{driver}[,@var{prop}[=@var{value}][,...]] > @findex -device > Add device @var{driver}. @var{prop}=@var{value} sets driver > properties. Valid properties depend on the driver. To get help on > -possible drivers and properties, use @code{-device ?} and > -@code{-device @var{driver},?}. > +possible drivers and properties, use @code{-device help} and > +@code{-device @var{driver},help}. > ETEXI > > DEFHEADING() > @@ -1365,7 +1361,7 @@ Valid values for @var{type} are > @code{virtio}, @code{i82551}, @code{i82557b}, @code{i82559er}, > @code{ne2k_pci}, @code{ne2k_isa}, @code{pcnet}, @code{rtl8139}, > @code{e1000}, @code{smc91c111}, @code{lance} and @code{mcf_fec}. > -Not all devices are supported on all targets. Use -net nic,model=? > +Not all devices are supported on all targets. Use @code{-net nic,model=help} > for a list of available devices for your target. > > @item -netdev user,id=@var{id}[,@var{option}][,@var{option}][,...] > @@ -2398,7 +2394,7 @@ Shorthand for -gdb tcp::1234, i.e. open a gdbserver on TCP port 1234 > ETEXI > > DEF("d", HAS_ARG, QEMU_OPTION_d, \ > - "-d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)\n", > + "-d item1,... output log to /tmp/qemu.log (use '-d help' for a list of log items)\n", > QEMU_ARCH_ALL) > STEXI > @item -d > @@ -2533,13 +2529,13 @@ ETEXI > > DEF("clock", HAS_ARG, QEMU_OPTION_clock, \ > "-clock force the use of the given methods for timer alarm.\n" \ > - " To see what timers are available use -clock ?\n", > + " To see what timers are available use '-clock help'\n", > QEMU_ARCH_ALL) > STEXI > @item -clock @var{method} > @findex -clock > Force the use of the given methods for timer alarm. To see what timers > -are available use -clock ?. > +are available use @code{-clock help}. > ETEXI > > HXCOMM Options deprecated by -rtc > @@ -2608,7 +2604,7 @@ watchdog with a single timer, or @code{i6300esb} (Intel 6300ESB I/O > controller hub) which is a much more featureful PCI-based dual-timer > watchdog. Choose a model for which your guest has drivers. > > -Use @code{-watchdog ?} to list available hardware models. Only one > +Use @code{-watchdog help} to list available hardware models. Only one > watchdog can be enabled for a guest. > ETEXI > > -- > 1.7.9.5 > >
On Thu, Oct 04, 2012 at 04:22:01PM +0100, Peter Maydell wrote: > Update the -help output and documentation so that it recommends > 'help' rather than '?' for the various "list valid values for this > option" cases. '?' is deprecated (as it can fail confusingly if > not quoted), so it's better to steer users towards 'help'. ('?' > still works, for backwards compatibility.) > > This is the -help option part of the change otherwise done in > commit c8057f9, since we are now past release 1.2 and free to > change our help text without worrying about breaking libvirt. > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org> > --- > v1->v2: added quoting to '-foo help' in various places > (I don't entirely agree with Eric about this but it will > probably help to unblock this patch) > > NB: v1 of this patch got a: > Signed-off-by: Daniel P. Berrange <berrange@redhat.com> > but I'm guessing you meant that to be a Reviewed-by or Acked-by ? > > qemu-options.hx | 38 +++++++++++++++++--------------------- > 1 file changed, 17 insertions(+), 21 deletions(-) > > diff --git a/qemu-options.hx b/qemu-options.hx > index 7d97f96..46f0539 100644 > --- a/qemu-options.hx > +++ b/qemu-options.hx > @@ -6,10 +6,6 @@ HXCOMM construct option structures, enums and help message for specified > HXCOMM architectures. > HXCOMM HXCOMM can be used for comments, discarded from both texi and C > > -HXCOMM TODO : when we are able to change -help output without breaking > -HXCOMM libvirt we should update the help options which refer to -cpu ?, > -HXCOMM -driver ?, etc to use the preferred -cpu help etc instead. > - > DEFHEADING(Standard options:) > STEXI > @table @option > @@ -33,7 +29,7 @@ ETEXI > > DEF("machine", HAS_ARG, QEMU_OPTION_machine, \ > "-machine [type=]name[,prop[=value][,...]]\n" > - " selects emulated machine (-machine ? for list)\n" > + " selects emulated machine ('-machine help' for list)\n" > " property accel=accel1[:accel2[:...]] selects accelerator\n" > " supported accelerators are kvm, xen, tcg (default: tcg)\n" > " kernel_irqchip=on|off controls accelerated irqchip support\n" > @@ -44,7 +40,7 @@ DEF("machine", HAS_ARG, QEMU_OPTION_machine, \ > STEXI > @item -machine [type=]@var{name}[,prop=@var{value}[,...]] > @findex -machine > -Select the emulated machine by @var{name}. Use @code{-machine ?} to list > +Select the emulated machine by @var{name}. Use @code{-machine help} to list > available machines. Supported machine properties are: > @table @option > @item accel=@var{accels1}[:@var{accels2}[:...]] > @@ -69,11 +65,11 @@ HXCOMM Deprecated by -machine > DEF("M", HAS_ARG, QEMU_OPTION_M, "", QEMU_ARCH_ALL) > > DEF("cpu", HAS_ARG, QEMU_OPTION_cpu, > - "-cpu cpu select CPU (-cpu ? for list)\n", QEMU_ARCH_ALL) > + "-cpu cpu select CPU ('-cpu help' for list)\n", QEMU_ARCH_ALL) > STEXI > @item -cpu @var{model} > @findex -cpu > -Select CPU model (-cpu ? for list and additional feature selection) > +Select CPU model (@code{-cpu help} for list and additional feature selection) > ETEXI > > DEF("smp", HAS_ARG, QEMU_OPTION_smp, > @@ -463,12 +459,12 @@ ETEXI > DEF("soundhw", HAS_ARG, QEMU_OPTION_soundhw, > "-soundhw c1,... enable audio support\n" > " and only specified sound cards (comma separated list)\n" > - " use -soundhw ? to get the list of supported cards\n" > - " use -soundhw all to enable all of them\n", QEMU_ARCH_ALL) > + " use '-soundhw help' to get the list of supported cards\n" > + " use '-soundhw all' to enable all of them\n", QEMU_ARCH_ALL) > STEXI > @item -soundhw @var{card1}[,@var{card2},...] or -soundhw all > @findex -soundhw > -Enable audio and selected sound hardware. Use ? to print all > +Enable audio and selected sound hardware. Use 'help' to print all > available sound hardware. > > @example > @@ -477,7 +473,7 @@ qemu-system-i386 -soundhw es1370 disk.img > qemu-system-i386 -soundhw ac97 disk.img > qemu-system-i386 -soundhw hda disk.img > qemu-system-i386 -soundhw all disk.img > -qemu-system-i386 -soundhw ? > +qemu-system-i386 -soundhw help > @end example > > Note that Linux's i810_audio OSS kernel (for AC97) module might > @@ -566,16 +562,16 @@ DEF("device", HAS_ARG, QEMU_OPTION_device, > "-device driver[,prop[=value][,...]]\n" > " add device (based on driver)\n" > " prop=value,... sets driver properties\n" > - " use -device ? to print all possible drivers\n" > - " use -device driver,? to print all possible properties\n", > + " use '-device help' to print all possible drivers\n" > + " use '-device driver,help' to print all possible properties\n", > QEMU_ARCH_ALL) > STEXI > @item -device @var{driver}[,@var{prop}[=@var{value}][,...]] > @findex -device > Add device @var{driver}. @var{prop}=@var{value} sets driver > properties. Valid properties depend on the driver. To get help on > -possible drivers and properties, use @code{-device ?} and > -@code{-device @var{driver},?}. > +possible drivers and properties, use @code{-device help} and > +@code{-device @var{driver},help}. > ETEXI > > DEFHEADING() > @@ -1365,7 +1361,7 @@ Valid values for @var{type} are > @code{virtio}, @code{i82551}, @code{i82557b}, @code{i82559er}, > @code{ne2k_pci}, @code{ne2k_isa}, @code{pcnet}, @code{rtl8139}, > @code{e1000}, @code{smc91c111}, @code{lance} and @code{mcf_fec}. > -Not all devices are supported on all targets. Use -net nic,model=? > +Not all devices are supported on all targets. Use @code{-net nic,model=help} > for a list of available devices for your target. > > @item -netdev user,id=@var{id}[,@var{option}][,@var{option}][,...] > @@ -2398,7 +2394,7 @@ Shorthand for -gdb tcp::1234, i.e. open a gdbserver on TCP port 1234 > ETEXI > > DEF("d", HAS_ARG, QEMU_OPTION_d, \ > - "-d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)\n", > + "-d item1,... output log to /tmp/qemu.log (use '-d help' for a list of log items)\n", > QEMU_ARCH_ALL) > STEXI > @item -d > @@ -2533,13 +2529,13 @@ ETEXI > > DEF("clock", HAS_ARG, QEMU_OPTION_clock, \ > "-clock force the use of the given methods for timer alarm.\n" \ > - " To see what timers are available use -clock ?\n", > + " To see what timers are available use '-clock help'\n", > QEMU_ARCH_ALL) > STEXI > @item -clock @var{method} > @findex -clock > Force the use of the given methods for timer alarm. To see what timers > -are available use -clock ?. > +are available use @code{-clock help}. > ETEXI > > HXCOMM Options deprecated by -rtc > @@ -2608,7 +2604,7 @@ watchdog with a single timer, or @code{i6300esb} (Intel 6300ESB I/O > controller hub) which is a much more featureful PCI-based dual-timer > watchdog. Choose a model for which your guest has drivers. > > -Use @code{-watchdog ?} to list available hardware models. Only one > +Use @code{-watchdog help} to list available hardware models. Only one > watchdog can be enabled for a guest. > ETEXI > Thanks, applied.
diff --git a/qemu-options.hx b/qemu-options.hx index 7d97f96..46f0539 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -6,10 +6,6 @@ HXCOMM construct option structures, enums and help message for specified HXCOMM architectures. HXCOMM HXCOMM can be used for comments, discarded from both texi and C -HXCOMM TODO : when we are able to change -help output without breaking -HXCOMM libvirt we should update the help options which refer to -cpu ?, -HXCOMM -driver ?, etc to use the preferred -cpu help etc instead. - DEFHEADING(Standard options:) STEXI @table @option @@ -33,7 +29,7 @@ ETEXI DEF("machine", HAS_ARG, QEMU_OPTION_machine, \ "-machine [type=]name[,prop[=value][,...]]\n" - " selects emulated machine (-machine ? for list)\n" + " selects emulated machine ('-machine help' for list)\n" " property accel=accel1[:accel2[:...]] selects accelerator\n" " supported accelerators are kvm, xen, tcg (default: tcg)\n" " kernel_irqchip=on|off controls accelerated irqchip support\n" @@ -44,7 +40,7 @@ DEF("machine", HAS_ARG, QEMU_OPTION_machine, \ STEXI @item -machine [type=]@var{name}[,prop=@var{value}[,...]] @findex -machine -Select the emulated machine by @var{name}. Use @code{-machine ?} to list +Select the emulated machine by @var{name}. Use @code{-machine help} to list available machines. Supported machine properties are: @table @option @item accel=@var{accels1}[:@var{accels2}[:...]] @@ -69,11 +65,11 @@ HXCOMM Deprecated by -machine DEF("M", HAS_ARG, QEMU_OPTION_M, "", QEMU_ARCH_ALL) DEF("cpu", HAS_ARG, QEMU_OPTION_cpu, - "-cpu cpu select CPU (-cpu ? for list)\n", QEMU_ARCH_ALL) + "-cpu cpu select CPU ('-cpu help' for list)\n", QEMU_ARCH_ALL) STEXI @item -cpu @var{model} @findex -cpu -Select CPU model (-cpu ? for list and additional feature selection) +Select CPU model (@code{-cpu help} for list and additional feature selection) ETEXI DEF("smp", HAS_ARG, QEMU_OPTION_smp, @@ -463,12 +459,12 @@ ETEXI DEF("soundhw", HAS_ARG, QEMU_OPTION_soundhw, "-soundhw c1,... enable audio support\n" " and only specified sound cards (comma separated list)\n" - " use -soundhw ? to get the list of supported cards\n" - " use -soundhw all to enable all of them\n", QEMU_ARCH_ALL) + " use '-soundhw help' to get the list of supported cards\n" + " use '-soundhw all' to enable all of them\n", QEMU_ARCH_ALL) STEXI @item -soundhw @var{card1}[,@var{card2},...] or -soundhw all @findex -soundhw -Enable audio and selected sound hardware. Use ? to print all +Enable audio and selected sound hardware. Use 'help' to print all available sound hardware. @example @@ -477,7 +473,7 @@ qemu-system-i386 -soundhw es1370 disk.img qemu-system-i386 -soundhw ac97 disk.img qemu-system-i386 -soundhw hda disk.img qemu-system-i386 -soundhw all disk.img -qemu-system-i386 -soundhw ? +qemu-system-i386 -soundhw help @end example Note that Linux's i810_audio OSS kernel (for AC97) module might @@ -566,16 +562,16 @@ DEF("device", HAS_ARG, QEMU_OPTION_device, "-device driver[,prop[=value][,...]]\n" " add device (based on driver)\n" " prop=value,... sets driver properties\n" - " use -device ? to print all possible drivers\n" - " use -device driver,? to print all possible properties\n", + " use '-device help' to print all possible drivers\n" + " use '-device driver,help' to print all possible properties\n", QEMU_ARCH_ALL) STEXI @item -device @var{driver}[,@var{prop}[=@var{value}][,...]] @findex -device Add device @var{driver}. @var{prop}=@var{value} sets driver properties. Valid properties depend on the driver. To get help on -possible drivers and properties, use @code{-device ?} and -@code{-device @var{driver},?}. +possible drivers and properties, use @code{-device help} and +@code{-device @var{driver},help}. ETEXI DEFHEADING() @@ -1365,7 +1361,7 @@ Valid values for @var{type} are @code{virtio}, @code{i82551}, @code{i82557b}, @code{i82559er}, @code{ne2k_pci}, @code{ne2k_isa}, @code{pcnet}, @code{rtl8139}, @code{e1000}, @code{smc91c111}, @code{lance} and @code{mcf_fec}. -Not all devices are supported on all targets. Use -net nic,model=? +Not all devices are supported on all targets. Use @code{-net nic,model=help} for a list of available devices for your target. @item -netdev user,id=@var{id}[,@var{option}][,@var{option}][,...] @@ -2398,7 +2394,7 @@ Shorthand for -gdb tcp::1234, i.e. open a gdbserver on TCP port 1234 ETEXI DEF("d", HAS_ARG, QEMU_OPTION_d, \ - "-d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)\n", + "-d item1,... output log to /tmp/qemu.log (use '-d help' for a list of log items)\n", QEMU_ARCH_ALL) STEXI @item -d @@ -2533,13 +2529,13 @@ ETEXI DEF("clock", HAS_ARG, QEMU_OPTION_clock, \ "-clock force the use of the given methods for timer alarm.\n" \ - " To see what timers are available use -clock ?\n", + " To see what timers are available use '-clock help'\n", QEMU_ARCH_ALL) STEXI @item -clock @var{method} @findex -clock Force the use of the given methods for timer alarm. To see what timers -are available use -clock ?. +are available use @code{-clock help}. ETEXI HXCOMM Options deprecated by -rtc @@ -2608,7 +2604,7 @@ watchdog with a single timer, or @code{i6300esb} (Intel 6300ESB I/O controller hub) which is a much more featureful PCI-based dual-timer watchdog. Choose a model for which your guest has drivers. -Use @code{-watchdog ?} to list available hardware models. Only one +Use @code{-watchdog help} to list available hardware models. Only one watchdog can be enabled for a guest. ETEXI
Update the -help output and documentation so that it recommends 'help' rather than '?' for the various "list valid values for this option" cases. '?' is deprecated (as it can fail confusingly if not quoted), so it's better to steer users towards 'help'. ('?' still works, for backwards compatibility.) This is the -help option part of the change otherwise done in commit c8057f9, since we are now past release 1.2 and free to change our help text without worrying about breaking libvirt. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- v1->v2: added quoting to '-foo help' in various places (I don't entirely agree with Eric about this but it will probably help to unblock this patch) NB: v1 of this patch got a: Signed-off-by: Daniel P. Berrange <berrange@redhat.com> but I'm guessing you meant that to be a Reviewed-by or Acked-by ? qemu-options.hx | 38 +++++++++++++++++--------------------- 1 file changed, 17 insertions(+), 21 deletions(-)