@@ -87,6 +87,11 @@ static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen)
| MMCI_BF(BLKLEN, blklen)
| MMCI_BIT(RDPROOF)
| MMCI_BIT(WRPROOF)), &mci->mr);
+ /*
+ * On some new platforms BLKLEN in mci->mr is ignored.
+ * Should use the BLKLEN in the block register.
+ */
+ writel(MMCI_BF(BLKLEN, blklen), &mci->blkr);
initialized = 1;
}
@@ -183,6 +188,12 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
/* Figure out the transfer arguments */
cmdr = mci_encode_cmd(cmd, data, &error_flags);
+ /* For multi blocks read/write, set the block register */
+ if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK)
+ || (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK))
+ writel(data->blocks | MMCI_BF(BLKLEN, mmc->read_bl_len),
+ &mci->blkr);
+
/* Send the command */
writel(cmd->cmdarg, &mci->argr);
writel(cmdr, &mci->cmdr);
@@ -38,7 +38,7 @@ typedef struct atmel_mci {
u32 sdcr; /* 0x0c */
u32 argr; /* 0x10 */
u32 cmdr; /* 0x14 */
- u32 _18; /* 0x18 */
+ u32 blkr; /* 0x18 */
u32 _1c; /* 0x1c */
u32 rspr; /* 0x20 */
u32 rspr1; /* 0x24 */
@@ -118,6 +118,11 @@ typedef struct atmel_mci {
#define MMCI_TRTYP_OFFSET 19
#define MMCI_TRTYP_SIZE 2
+/* Bitfields in BLKR */
+/* MMCI_BLKLEN_OFFSET/SIZE already defined in MR */
+#define MMCI_BCNT_OFFSET 0
+#define MMCI_BCNT_SIZE 16
+
/* Bitfields in RSPRx */
#define MMCI_RSP_OFFSET 0
#define MMCI_RSP_SIZE 32
Since the at91sam9263, the mmc hardware support multi blocks read/write. So this driver enable it. Signed-off-by: Josh Wu <josh.wu@atmel.com> --- since v1: use MMCI_BF macro and remove the redefinition for the BLKLEN according to Andreas' suggestion. drivers/mmc/gen_atmel_mci.c | 11 +++++++++++ include/atmel_mci.h | 7 ++++++- 2 files changed, 17 insertions(+), 1 deletion(-)