| Message ID | 1349315254-21151-22-git-send-email-troy.kisky@boundarydevices.com |
|---|---|
| State | Changes Requested |
| Delegated to: | Stefano Babic |
| Headers | show |
Hi Troy, On 10/03/2012 06:47 PM, Troy Kisky wrote: > Sabrelite does not have memory associated with CS1 > > Signed-off-by: Troy Kisky<troy.kisky@boundarydevices.com> > --- > board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 5 ----- > 1 file changed, 5 deletions(-) > > diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg > index 9c622c8..2d03ff7 100644 > --- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg > +++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg > @@ -155,20 +155,15 @@ WRITE_ENTRY1(MMDC_P0_MDCTL, 0x831A0000) > > /* MDSCR, con_req, LOAD MR2, CS0, A3,A10 set (CAS Write=6), RZQ/2 */ > WRITE_ENTRY1(MMDC_P0_MDSCR, 0x04088032) > -WRITE_ENTRY1(MMDC_P0_MDSCR, 0x0408803A) > /* LOAD MR3, CS0 */ > WRITE_ENTRY1(MMDC_P0_MDSCR, 0x00008033) > -WRITE_ENTRY1(MMDC_P0_MDSCR, 0x0000803B) > /* LOAD MR1, CS0, A1,A6 set Rtt=RZQ/2, ODI=RZQ/7 */ > WRITE_ENTRY1(MMDC_P0_MDSCR, 0x00428031) > -WRITE_ENTRY1(MMDC_P0_MDSCR, 0x00428039) > /* LOAD MR0, CS0, A6,A8,A11 set CAS=8, WR=8, DLL reset */ > WRITE_ENTRY1(MMDC_P0_MDSCR, 0x09408030) > -WRITE_ENTRY1(MMDC_P0_MDSCR, 0x09408038) > > /* ZQ calibrate, CS0 */ > WRITE_ENTRY1(MMDC_P0_MDSCR, 0x04008040) > -WRITE_ENTRY1(MMDC_P0_MDSCR, 0x04008048) > WRITE_ENTRY1(MMDC_P0_MPZQHWCTRL, 0xA1380003) > WRITE_ENTRY1(MMDC_P1_MPZQHWCTRL, 0xA1380003) > Note that mx6qsabreauto and mx6qsabresd also use this config file. That said, none of these boards have pad DRAM_CS1 connected.
diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg index 9c622c8..2d03ff7 100644 --- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg @@ -155,20 +155,15 @@ WRITE_ENTRY1(MMDC_P0_MDCTL, 0x831A0000) /* MDSCR, con_req, LOAD MR2, CS0, A3,A10 set (CAS Write=6), RZQ/2 */ WRITE_ENTRY1(MMDC_P0_MDSCR, 0x04088032) -WRITE_ENTRY1(MMDC_P0_MDSCR, 0x0408803A) /* LOAD MR3, CS0 */ WRITE_ENTRY1(MMDC_P0_MDSCR, 0x00008033) -WRITE_ENTRY1(MMDC_P0_MDSCR, 0x0000803B) /* LOAD MR1, CS0, A1,A6 set Rtt=RZQ/2, ODI=RZQ/7 */ WRITE_ENTRY1(MMDC_P0_MDSCR, 0x00428031) -WRITE_ENTRY1(MMDC_P0_MDSCR, 0x00428039) /* LOAD MR0, CS0, A6,A8,A11 set CAS=8, WR=8, DLL reset */ WRITE_ENTRY1(MMDC_P0_MDSCR, 0x09408030) -WRITE_ENTRY1(MMDC_P0_MDSCR, 0x09408038) /* ZQ calibrate, CS0 */ WRITE_ENTRY1(MMDC_P0_MDSCR, 0x04008040) -WRITE_ENTRY1(MMDC_P0_MDSCR, 0x04008048) WRITE_ENTRY1(MMDC_P0_MPZQHWCTRL, 0xA1380003) WRITE_ENTRY1(MMDC_P1_MPZQHWCTRL, 0xA1380003)
Sabrelite does not have memory associated with CS1 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> --- board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 5 ----- 1 file changed, 5 deletions(-)