[2/3,v2] iommu/fsl: Add iommu domain attributes required by fsl PAMU driver.

From: Varun Sethi <Varun.Sethi@freescale.com>

Added the following domain attributes required by FSL PAMU driver:
1. Subwindows field added to the iommu domain geometry attribute.
2. Added new iommu stash attribute, which allows setting of the
   LIODN specific stash id parameter through IOMMU API.
3. Added an attribute for enabling/disabling DMA to a particular
   memory window.

Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
---
 include/linux/iommu.h |   35 +++++++++++++++++++++++++++++++++++
 1 files changed, 35 insertions(+), 0 deletions(-)

On Oct 4, 2012, at 6:56 AM, <b16395@freescale.com> <b16395@freescale.com> wrote:

> From: Varun Sethi <Varun.Sethi@freescale.com>
> 
> Added the following domain attributes required by FSL PAMU driver:
> 1. Subwindows field added to the iommu domain geometry attribute.
> 2. Added new iommu stash attribute, which allows setting of the
>   LIODN specific stash id parameter through IOMMU API.
> 3. Added an attribute for enabling/disabling DMA to a particular
>   memory window.
> 
> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
> ---
> include/linux/iommu.h |   35 +++++++++++++++++++++++++++++++++++
> 1 files changed, 35 insertions(+), 0 deletions(-)
> 
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index f3b99e1..62e22f0 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -44,6 +44,33 @@ struct iommu_domain_geometry {
> 	dma_addr_t aperture_start; /* First address that can be mapped    */
> 	dma_addr_t aperture_end;   /* Last address that can be mapped     */
> 	bool force_aperture;       /* DMA only allowed in mappable range? */
> +
> +	/* The subwindows field indicates number of DMA subwindows supported
> +	 * by the geometry. Following is the interpretation of
> +	 * values for this field:
> +	 * 0 : This implies that the supported geometry size is 1 MB
> +         * with each subwindow size being 4KB. Thus number of subwindows
> +	 * being = 1MB/4KB = 256.
> +	 * 1 : Only one DMA window i.e. no subwindows.
> +	 * value other than 0 or 1 would indicate actual number of subwindows.
> +	 */
> +	u32 subwindows;
> +};
> +
> +/* cache stash targets */
> +#define L1_CACHE 1
> +#define L2_CACHE 2
> +#define L3_CACHE 3

These names are way to generic for being exposed to user space

> +
> +/* This attribute corresponds to IOMMUs capable of generating
> + * a stash transaction. A stash transaction is typically a
> + * hardware initiated prefetch of data from memory to cache.
> + * This attribute allows configuring stashig specific parameters
> + * in the IOMMU hardware.
> + */
> +struct iommu_stash_attribute {
> +	u32 	cpu;	/* cpu number */
> +	u32 	cache;	/* cache to stash to: L1,L2,L3 */
> };
> 
> struct iommu_domain {
> @@ -60,6 +87,14 @@ struct iommu_domain {
> enum iommu_attr {
> 	DOMAIN_ATTR_MAX,
> 	DOMAIN_ATTR_GEOMETRY,
> +	/* Set the IOMMU hardware stashing
> +	 * parameters.
> +	 */
> +	DOMAIN_ATTR_STASH,
> +	/* Explicity enable/disable DMA for a
> +         * particular memory window.
> +         */
> +	DOMAIN_ATTR_ENABLE,
> };
> 
> #ifdef CONFIG_IOMMU_API
> -- 
> 1.7.4.1
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

> -----Original Message-----
> From: Kumar Gala [mailto:galak@kernel.crashing.org]
> Sent: Thursday, October 04, 2012 6:47 PM
> To: Sethi Varun-B16395
> Cc: joerg.roedel@amd.com; iommu@lists.linux-foundation.org; linuxppc-
> dev@lists.ozlabs.org; linux-kernel@vger.kernel.org; Sethi Varun-B16395
> Subject: Re: [PATCH 2/3 v2] iommu/fsl: Add iommu domain attributes
> required by fsl PAMU driver.
> 
> 
> On Oct 4, 2012, at 6:56 AM, <b16395@freescale.com> <b16395@freescale.com>
> wrote:
> 
> > From: Varun Sethi <Varun.Sethi@freescale.com>
> >
> > Added the following domain attributes required by FSL PAMU driver:
> > 1. Subwindows field added to the iommu domain geometry attribute.
> > 2. Added new iommu stash attribute, which allows setting of the
> >   LIODN specific stash id parameter through IOMMU API.
> > 3. Added an attribute for enabling/disabling DMA to a particular
> >   memory window.
> >
> > Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
> > ---
> > include/linux/iommu.h |   35 +++++++++++++++++++++++++++++++++++
> > 1 files changed, 35 insertions(+), 0 deletions(-)
> >
> > diff --git a/include/linux/iommu.h b/include/linux/iommu.h index
> > f3b99e1..62e22f0 100644
> > --- a/include/linux/iommu.h
> > +++ b/include/linux/iommu.h
> > @@ -44,6 +44,33 @@ struct iommu_domain_geometry {
> > 	dma_addr_t aperture_start; /* First address that can be mapped
> */
> > 	dma_addr_t aperture_end;   /* Last address that can be mapped
> */
> > 	bool force_aperture;       /* DMA only allowed in mappable range?
> */
> > +
> > +	/* The subwindows field indicates number of DMA subwindows
> supported
> > +	 * by the geometry. Following is the interpretation of
> > +	 * values for this field:
> > +	 * 0 : This implies that the supported geometry size is 1 MB
> > +         * with each subwindow size being 4KB. Thus number of
> subwindows
> > +	 * being = 1MB/4KB = 256.
> > +	 * 1 : Only one DMA window i.e. no subwindows.
> > +	 * value other than 0 or 1 would indicate actual number of
> subwindows.
> > +	 */
> > +	u32 subwindows;
> > +};
> > +
> > +/* cache stash targets */
> > +#define L1_CACHE 1
> > +#define L2_CACHE 2
> > +#define L3_CACHE 3
> 
> These names are way to generic for being exposed to user space
Will fix naming to IOMMU_ATTR_CACHE_L1 etc.

-Varun