Message ID | 504F4CE1.7020405@siemens.com |
---|---|
State | New |
Headers | show |
Am 11.09.2012 16:38, schrieb Jan Kiszka: > We have debugcon these days to listen on those ports that receive debug > messages. Also drop the others that have no effect anymore. > > Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> This looks pretty identical to Hervé's "pc: remove DEBUG_BIOS define and QEMU exit I/O ports", doesn't it? The discussion there concluded that compatibility needs to be provided for older machines. http://patchwork.ozlabs.org/patch/169542/ http://patchwork.ozlabs.org/patch/169543/ Andreas > --- > hw/pc.c | 27 --------------------------- > 1 files changed, 0 insertions(+), 27 deletions(-) > > diff --git a/hw/pc.c b/hw/pc.c > index 112739a..7e7e0e2 100644 > --- a/hw/pc.c > +++ b/hw/pc.c > @@ -53,9 +53,6 @@ > #include "bitmap.h" > #include "vga-pci.h" > > -/* output Bochs bios info messages */ > -//#define DEBUG_BIOS > - > /* debug PC/ISA interrupts */ > //#define DEBUG_IRQ > > @@ -534,17 +531,6 @@ static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val) > static int shutdown_index = 0; > > switch(addr) { > - /* Bochs BIOS messages */ > - case 0x400: > - case 0x401: > - /* used to be panic, now unused */ > - break; > - case 0x402: > - case 0x403: > -#ifdef DEBUG_BIOS > - fprintf(stderr, "%c", val); > -#endif > - break; > case 0x8900: > /* same as Bochs power off */ > if (val == shutdown_str[shutdown_index]) { > @@ -558,16 +544,9 @@ static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val) > } > break; > > - /* LGPL'ed VGA BIOS messages */ > case 0x501: > case 0x502: > exit((val << 1) | 1); > - case 0x500: > - case 0x503: > -#ifdef DEBUG_BIOS > - fprintf(stderr, "%c", val); > -#endif > - break; > } > } > > @@ -596,17 +575,11 @@ static void *bochs_bios_init(void) > uint64_t *numa_fw_cfg; > int i, j; > > - register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL); > - register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL); > - register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL); > - register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL); > register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL); > > register_ioport_write(0x501, 1, 1, bochs_bios_write, NULL); > register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL); > register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL); > - register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL); > - register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL); > > fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0); > >
On 2012-09-11 16:48, Andreas Färber wrote: > Am 11.09.2012 16:38, schrieb Jan Kiszka: >> We have debugcon these days to listen on those ports that receive debug >> messages. Also drop the others that have no effect anymore. >> >> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> > > This looks pretty identical to Hervé's "pc: remove DEBUG_BIOS define and > QEMU exit I/O ports", doesn't it? The discussion there concluded that > compatibility needs to be provided for older machines. I'm not removing any behaviour that can be achieved _without_ additionally patching QEMU. I'm just removing practically dead debug code, leaving in the bits that do have effects. Jan
Jan Kiszka <jan.kiszka@siemens.com> writes: > We have debugcon these days to listen on those ports that receive debug > messages. Also drop the others that have no effect anymore. > > Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> I'll pick this up after it goes through testing. Regards, Anthony Liguori > --- > hw/pc.c | 27 --------------------------- > 1 files changed, 0 insertions(+), 27 deletions(-) > > diff --git a/hw/pc.c b/hw/pc.c > index 112739a..7e7e0e2 100644 > --- a/hw/pc.c > +++ b/hw/pc.c > @@ -53,9 +53,6 @@ > #include "bitmap.h" > #include "vga-pci.h" > > -/* output Bochs bios info messages */ > -//#define DEBUG_BIOS > - > /* debug PC/ISA interrupts */ > //#define DEBUG_IRQ > > @@ -534,17 +531,6 @@ static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val) > static int shutdown_index = 0; > > switch(addr) { > - /* Bochs BIOS messages */ > - case 0x400: > - case 0x401: > - /* used to be panic, now unused */ > - break; > - case 0x402: > - case 0x403: > -#ifdef DEBUG_BIOS > - fprintf(stderr, "%c", val); > -#endif > - break; > case 0x8900: > /* same as Bochs power off */ > if (val == shutdown_str[shutdown_index]) { > @@ -558,16 +544,9 @@ static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val) > } > break; > > - /* LGPL'ed VGA BIOS messages */ > case 0x501: > case 0x502: > exit((val << 1) | 1); > - case 0x500: > - case 0x503: > -#ifdef DEBUG_BIOS > - fprintf(stderr, "%c", val); > -#endif > - break; > } > } > > @@ -596,17 +575,11 @@ static void *bochs_bios_init(void) > uint64_t *numa_fw_cfg; > int i, j; > > - register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL); > - register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL); > - register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL); > - register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL); > register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL); > > register_ioport_write(0x501, 1, 1, bochs_bios_write, NULL); > register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL); > register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL); > - register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL); > - register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL); > > fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0); > > -- > 1.7.3.4
Am 11.09.2012 17:04, schrieb Jan Kiszka: > On 2012-09-11 16:48, Andreas Färber wrote: >> Am 11.09.2012 16:38, schrieb Jan Kiszka: >>> We have debugcon these days to listen on those ports that receive debug >>> messages. Also drop the others that have no effect anymore. >>> >>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> >> >> This looks pretty identical to Hervé's "pc: remove DEBUG_BIOS define and >> QEMU exit I/O ports", doesn't it? The discussion there concluded that >> compatibility needs to be provided for older machines. > > I'm not removing any behaviour that can be achieved _without_ > additionally patching QEMU. I'm just removing practically dead debug > code, leaving in the bits that do have effects. Didn't want to argue about that, just pointing you to the discussion thread that you have snipped above. It was Anthony's request. ;) Andreas
On 2012-09-11 17:11, Andreas Färber wrote: > Am 11.09.2012 17:04, schrieb Jan Kiszka: >> On 2012-09-11 16:48, Andreas Färber wrote: >>> Am 11.09.2012 16:38, schrieb Jan Kiszka: >>>> We have debugcon these days to listen on those ports that receive debug >>>> messages. Also drop the others that have no effect anymore. >>>> >>>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> >>> >>> This looks pretty identical to Hervé's "pc: remove DEBUG_BIOS define and >>> QEMU exit I/O ports", doesn't it? The discussion there concluded that >>> compatibility needs to be provided for older machines. >> >> I'm not removing any behaviour that can be achieved _without_ >> additionally patching QEMU. I'm just removing practically dead debug >> code, leaving in the bits that do have effects. > > Didn't want to argue about that, just pointing you to the discussion > thread that you have snipped above. It was Anthony's request. ;) The 2nd patch cited did more than what my patch does by making those ports optional (and apparently default off) that do have effect. Jan
Jan Kiszka <jan.kiszka@siemens.com> writes: > We have debugcon these days to listen on those ports that receive debug > messages. Also drop the others that have no effect anymore. > > Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Applied. Thanks. Regards, Anthony Liguori > --- > hw/pc.c | 27 --------------------------- > 1 files changed, 0 insertions(+), 27 deletions(-) > > diff --git a/hw/pc.c b/hw/pc.c > index 112739a..7e7e0e2 100644 > --- a/hw/pc.c > +++ b/hw/pc.c > @@ -53,9 +53,6 @@ > #include "bitmap.h" > #include "vga-pci.h" > > -/* output Bochs bios info messages */ > -//#define DEBUG_BIOS > - > /* debug PC/ISA interrupts */ > //#define DEBUG_IRQ > > @@ -534,17 +531,6 @@ static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val) > static int shutdown_index = 0; > > switch(addr) { > - /* Bochs BIOS messages */ > - case 0x400: > - case 0x401: > - /* used to be panic, now unused */ > - break; > - case 0x402: > - case 0x403: > -#ifdef DEBUG_BIOS > - fprintf(stderr, "%c", val); > -#endif > - break; > case 0x8900: > /* same as Bochs power off */ > if (val == shutdown_str[shutdown_index]) { > @@ -558,16 +544,9 @@ static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val) > } > break; > > - /* LGPL'ed VGA BIOS messages */ > case 0x501: > case 0x502: > exit((val << 1) | 1); > - case 0x500: > - case 0x503: > -#ifdef DEBUG_BIOS > - fprintf(stderr, "%c", val); > -#endif > - break; > } > } > > @@ -596,17 +575,11 @@ static void *bochs_bios_init(void) > uint64_t *numa_fw_cfg; > int i, j; > > - register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL); > - register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL); > - register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL); > - register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL); > register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL); > > register_ioport_write(0x501, 1, 1, bochs_bios_write, NULL); > register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL); > register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL); > - register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL); > - register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL); > > fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0); > > -- > 1.7.3.4
diff --git a/hw/pc.c b/hw/pc.c index 112739a..7e7e0e2 100644 --- a/hw/pc.c +++ b/hw/pc.c @@ -53,9 +53,6 @@ #include "bitmap.h" #include "vga-pci.h" -/* output Bochs bios info messages */ -//#define DEBUG_BIOS - /* debug PC/ISA interrupts */ //#define DEBUG_IRQ @@ -534,17 +531,6 @@ static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val) static int shutdown_index = 0; switch(addr) { - /* Bochs BIOS messages */ - case 0x400: - case 0x401: - /* used to be panic, now unused */ - break; - case 0x402: - case 0x403: -#ifdef DEBUG_BIOS - fprintf(stderr, "%c", val); -#endif - break; case 0x8900: /* same as Bochs power off */ if (val == shutdown_str[shutdown_index]) { @@ -558,16 +544,9 @@ static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val) } break; - /* LGPL'ed VGA BIOS messages */ case 0x501: case 0x502: exit((val << 1) | 1); - case 0x500: - case 0x503: -#ifdef DEBUG_BIOS - fprintf(stderr, "%c", val); -#endif - break; } } @@ -596,17 +575,11 @@ static void *bochs_bios_init(void) uint64_t *numa_fw_cfg; int i, j; - register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL); - register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL); - register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL); - register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL); register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL); register_ioport_write(0x501, 1, 1, bochs_bios_write, NULL); register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL); register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL); - register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL); - register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL); fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
We have debugcon these days to listen on those ports that receive debug messages. Also drop the others that have no effect anymore. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> --- hw/pc.c | 27 --------------------------- 1 files changed, 0 insertions(+), 27 deletions(-)