| Message ID | 1346962375-26163-8-git-send-email-robherring2@gmail.com |
|---|---|
| State | New |
| Headers | show |
On Thu, Sep 06, 2012 at 03:12:50PM -0500, Rob Herring wrote: > +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb > +dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb > +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb tegra20-paz00.dtb \ > + tegra20-seaboard.dtb tegra20-trimslice.dtb tegra20-ventana.dtb \ > + tegra20-whistler.dtb > +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb > +dtb-$(CONFIG_BOARD_SPEAR600_DT) += spear600-evb.dtb Replace tab with space? > +dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb armada-xp-db.dtb > +dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb at91sam9263ek.dtb \ > + at91sam9g20ek_2mmc.dtb at91sam9g20ek.dtb at91sam9g25ek.dtb \ > + at91sam9m10g45ek.dtb at91sam9n12ek.dtb ethernut5.dtb evk-pro3.dtb \ > + kizbox.dtb tny_a9260.dtb tny_a9263.dtb tny_a9g20.dtb usb_a9260.dtb \ > + usb_a9263.dtb usb_a9g20.dtb > +dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb kirkwood-dns325.dtb > +dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb > +dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb > +dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb > +dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb > +dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb > +dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb > +dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb > +dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \ > + imx53-qsb.dtb imx53-smd.dtb > +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb > +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb > +dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb > +dtb-$(CONFIG_MACH_SPEAR1310) += spear1310-evb.dtb > +dtb-$(CONFIG_MACH_SPEAR1340) += spear1340-evb.dtb > +dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb > +dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb > +dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb > +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb kirkwood-ts219-6282.dtb > +dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb imx6q-sabrelite.dtb \ Ditto > + imx6q-sabresd.dtb This does not follow the indention pattern. > +dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb imx23-olinuxino.dtb \ > + imx23-stmp378x_devb.dtb imx28-apx4devkit.dtb \ > + imx28-cfa10036.dtb imx28-evk.dtb \ > + imx28-m28evk.dtb imx28-tx28.dtb Ditto > +dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ > + vexpress-v2p-ca9.dtb vexpress-v2p-ca15-tc1.dtb \ > + vexpress-v2p-ca15_a7.dtb Ditto CONFIG_ARCH_MXS and CONFIG_ARCH_VEXPRESS entries are not well sorted. They should be in the CONFIG_ARCH_* section. Otherwise, Acked-by: Shawn Guo <shawn.guo@linaro.org> PS. A little heads-up: if this lands on 3.7, there will be conflict on arch/arm/mach-mxs/Makefile.boot which gets new entries in this cycle.
On 09/06/2012 08:27 PM, Shawn Guo wrote: > On Thu, Sep 06, 2012 at 03:12:50PM -0500, Rob Herring wrote: >> +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb >> +dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb >> +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb tegra20-paz00.dtb \ >> + tegra20-seaboard.dtb tegra20-trimslice.dtb tegra20-ventana.dtb \ >> + tegra20-whistler.dtb Hmm. The existing files all have one file per line, which makes adding/removing files have a little less impact; whole lines are added/removed rather than needing to reflow the whole list. Should we apply the same layout here too? > PS. A little heads-up: if this lands on 3.7, there will be conflict > on arch/arm/mach-mxs/Makefile.boot which gets new entries in this > cycle. The same is true of Tegra: -dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a02.dtb +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a04.dtb
On Thu, Sep 06, 2012 at 08:36:41PM -0600, Stephen Warren wrote: > On 09/06/2012 08:27 PM, Shawn Guo wrote: > > On Thu, Sep 06, 2012 at 03:12:50PM -0500, Rob Herring wrote: > >> +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb > >> +dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb > >> +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb tegra20-paz00.dtb \ > >> + tegra20-seaboard.dtb tegra20-trimslice.dtb tegra20-ventana.dtb \ > >> + tegra20-whistler.dtb > > Hmm. The existing files all have one file per line, which makes > adding/removing files have a little less impact; whole lines are > added/removed rather than needing to reflow the whole list. Should we > apply the same layout here too? > +1
> > PS. A little heads-up: if this lands on 3.7, there will be conflict > > on arch/arm/mach-mxs/Makefile.boot which gets new entries in this > > cycle. > > The same is true of Tegra: > > -dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb > +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a02.dtb > +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a04.dtb Ditto kirkwood and mvebu. And Dove might also gain DT support, resulting in new entries in its Makefile.boot. Andrew
On 09/07/2012 12:19 AM, Andrew Lunn wrote: >>> PS. A little heads-up: if this lands on 3.7, there will be conflict >>> on arch/arm/mach-mxs/Makefile.boot which gets new entries in this >>> cycle. >> >> The same is true of Tegra: >> >> -dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb >> +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a02.dtb >> +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a04.dtb > > Ditto kirkwood and mvebu. And Dove might also gain DT support, > resulting in new entries in its Makefile.boot. It's basically scripted plus fix-up multi-line entries. We could do this at the end of the merge window. I don't think "make dtbs" for multi-platform enabled platforms being bisectable is too important. Rob
On Friday 07 September 2012, Rob Herring wrote: > > On 09/07/2012 12:19 AM, Andrew Lunn wrote: > >>> PS. A little heads-up: if this lands on 3.7, there will be conflict > >>> on arch/arm/mach-mxs/Makefile.boot which gets new entries in this > >>> cycle. > >> > >> The same is true of Tegra: > >> > >> -dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb > >> +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a02.dtb > >> +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a04.dtb > > > > Ditto kirkwood and mvebu. And Dove might also gain DT support, > > resulting in new entries in its Makefile.boot. > > It's basically scripted plus fix-up multi-line entries. We could do this > at the end of the merge window. I don't think "make dtbs" for > multi-platform enabled platforms being bisectable is too important. I think I'd rather merge the series early in the merge window and then send a follow-up later. It shouldn't hurt to add the lines in the Makefile.boot files after this patch, right? Arnd
On 09/07/2012 08:25 AM, Arnd Bergmann wrote: > On Friday 07 September 2012, Rob Herring wrote: >> >> On 09/07/2012 12:19 AM, Andrew Lunn wrote: >>>>> PS. A little heads-up: if this lands on 3.7, there will be conflict >>>>> on arch/arm/mach-mxs/Makefile.boot which gets new entries in this >>>>> cycle. >>>> >>>> The same is true of Tegra: >>>> >>>> -dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb >>>> +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a02.dtb >>>> +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a04.dtb >>> >>> Ditto kirkwood and mvebu. And Dove might also gain DT support, >>> resulting in new entries in its Makefile.boot. >> >> It's basically scripted plus fix-up multi-line entries. We could do this >> at the end of the merge window. I don't think "make dtbs" for >> multi-platform enabled platforms being bisectable is too important. > > I think I'd rather merge the series early in the merge window and > then send a follow-up later. It shouldn't hurt to add the lines > in the Makefile.boot files after this patch, right? In Steven's example, no, but if it's just a new line with only " board.dtb \" then it will have to be fixed. I suppose I could just move the converted platforms and leave the rest. That doesn't help mvebu though. Rob
On 15:12 Thu 06 Sep , Rob Herring wrote: > From: Rob Herring <rob.herring@calxeda.com> > > In preparation to support multi-platform kernels, move all the dtb targets > out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile > which is closer to the sources. > > Signed-off-by: Rob Herring <rob.herring@calxeda.com> > Cc: Russell King <linux@arm.linux.org.uk> > Cc: Andrew Victor <linux@maxim.org.za> > Cc: Nicolas Ferre <nicolas.ferre@atmel.com> > Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> > Cc: Kukjin Kim <kgene.kim@samsung.com> > Cc: Sascha Hauer <kernel@pengutronix.de> > Cc: Jason Cooper <jason@lakedaemon.net> > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Gregory Clement <gregory.clement@free-electrons.com> > Cc: Shawn Guo <shawn.guo@linaro.org> > Cc: Viresh Kumar <viresh.linux@gmail.com> > Cc: Shiraz Hashim <shiraz.hashim@st.com> > Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> > Cc: Stephen Warren <swarren@wwwdotorg.org> > Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > --- > arch/arm/boot/Makefile | 2 ++ > arch/arm/boot/dts/Makefile | 41 +++++++++++++++++++++++++++++++++ > arch/arm/mach-at91/Makefile.boot | 24 ------------------- > arch/arm/mach-exynos/Makefile.boot | 3 --- > arch/arm/mach-imx/Makefile.boot | 7 ------ > arch/arm/mach-kirkwood/Makefile.boot | 11 --------- > arch/arm/mach-lpc32xx/Makefile.boot | 2 -- > arch/arm/mach-mvebu/Makefile.boot | 2 -- > arch/arm/mach-mxs/Makefile.boot | 9 -------- > arch/arm/mach-spear13xx/Makefile.boot | 3 --- > arch/arm/mach-spear3xx/Makefile.boot | 4 ---- > arch/arm/mach-spear6xx/Makefile.boot | 2 -- > arch/arm/mach-tegra/Makefile.boot | 8 ------- > arch/arm/mach-ux500/Makefile.boot | 2 -- > arch/arm/mach-vexpress/Makefile.boot | 5 ---- > 15 files changed, 43 insertions(+), 82 deletions(-) > create mode 100644 arch/arm/boot/dts/Makefile > > diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile > index c877087..3fdab01 100644 > --- a/arch/arm/boot/Makefile > +++ b/arch/arm/boot/Makefile > @@ -15,6 +15,8 @@ ifneq ($(MACHINE),) > include $(srctree)/$(MACHINE)/Makefile.boot > endif > > +include $(srctree)/arch/arm/boot/dts/Makefile > + > # Note: the following conditions must always be true: > # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) > # PARAMS_PHYS must be within 4MB of ZRELADDR > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > new file mode 100644 > index 0000000..e59586b > --- /dev/null > +++ b/arch/arm/boot/dts/Makefile > @@ -0,0 +1,41 @@ > +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb sorry I see no need of the dtb-y just do all the time Best Regards, J.
On 09/10/2012 10:52 AM, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 15:12 Thu 06 Sep , Rob Herring wrote: >> From: Rob Herring <rob.herring@calxeda.com> >> >> In preparation to support multi-platform kernels, move all the dtb targets >> out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile >> which is closer to the sources. >> >> Signed-off-by: Rob Herring <rob.herring@calxeda.com> >> Cc: Russell King <linux@arm.linux.org.uk> >> Cc: Andrew Victor <linux@maxim.org.za> >> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> >> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> >> Cc: Kukjin Kim <kgene.kim@samsung.com> >> Cc: Sascha Hauer <kernel@pengutronix.de> >> Cc: Jason Cooper <jason@lakedaemon.net> >> Cc: Andrew Lunn <andrew@lunn.ch> >> Cc: Gregory Clement <gregory.clement@free-electrons.com> >> Cc: Shawn Guo <shawn.guo@linaro.org> >> Cc: Viresh Kumar <viresh.linux@gmail.com> >> Cc: Shiraz Hashim <shiraz.hashim@st.com> >> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> >> Cc: Stephen Warren <swarren@wwwdotorg.org> >> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> >> Cc: Linus Walleij <linus.walleij@linaro.org> >> --- >> arch/arm/boot/Makefile | 2 ++ >> arch/arm/boot/dts/Makefile | 41 +++++++++++++++++++++++++++++++++ >> arch/arm/mach-at91/Makefile.boot | 24 ------------------- >> arch/arm/mach-exynos/Makefile.boot | 3 --- >> arch/arm/mach-imx/Makefile.boot | 7 ------ >> arch/arm/mach-kirkwood/Makefile.boot | 11 --------- >> arch/arm/mach-lpc32xx/Makefile.boot | 2 -- >> arch/arm/mach-mvebu/Makefile.boot | 2 -- >> arch/arm/mach-mxs/Makefile.boot | 9 -------- >> arch/arm/mach-spear13xx/Makefile.boot | 3 --- >> arch/arm/mach-spear3xx/Makefile.boot | 4 ---- >> arch/arm/mach-spear6xx/Makefile.boot | 2 -- >> arch/arm/mach-tegra/Makefile.boot | 8 ------- >> arch/arm/mach-ux500/Makefile.boot | 2 -- >> arch/arm/mach-vexpress/Makefile.boot | 5 ---- >> 15 files changed, 43 insertions(+), 82 deletions(-) >> create mode 100644 arch/arm/boot/dts/Makefile >> >> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile >> index c877087..3fdab01 100644 >> --- a/arch/arm/boot/Makefile >> +++ b/arch/arm/boot/Makefile >> @@ -15,6 +15,8 @@ ifneq ($(MACHINE),) >> include $(srctree)/$(MACHINE)/Makefile.boot >> endif >> >> +include $(srctree)/arch/arm/boot/dts/Makefile >> + >> # Note: the following conditions must always be true: >> # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) >> # PARAMS_PHYS must be within 4MB of ZRELADDR >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> new file mode 100644 >> index 0000000..e59586b >> --- /dev/null >> +++ b/arch/arm/boot/dts/Makefile >> @@ -0,0 +1,41 @@ >> +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb > sorry I see no need of the dtb-y > > just do all the time That's not how it works today. dtb's only for all enabled platforms are built. Changing the behavior should be a different patch. Rob
On 12:51 Mon 10 Sep , Rob Herring wrote: > On 09/10/2012 10:52 AM, Jean-Christophe PLAGNIOL-VILLARD wrote: > > On 15:12 Thu 06 Sep , Rob Herring wrote: > >> From: Rob Herring <rob.herring@calxeda.com> > >> > >> In preparation to support multi-platform kernels, move all the dtb targets > >> out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile > >> which is closer to the sources. > >> > >> Signed-off-by: Rob Herring <rob.herring@calxeda.com> > >> Cc: Russell King <linux@arm.linux.org.uk> > >> Cc: Andrew Victor <linux@maxim.org.za> > >> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> > >> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> > >> Cc: Kukjin Kim <kgene.kim@samsung.com> > >> Cc: Sascha Hauer <kernel@pengutronix.de> > >> Cc: Jason Cooper <jason@lakedaemon.net> > >> Cc: Andrew Lunn <andrew@lunn.ch> > >> Cc: Gregory Clement <gregory.clement@free-electrons.com> > >> Cc: Shawn Guo <shawn.guo@linaro.org> > >> Cc: Viresh Kumar <viresh.linux@gmail.com> > >> Cc: Shiraz Hashim <shiraz.hashim@st.com> > >> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> > >> Cc: Stephen Warren <swarren@wwwdotorg.org> > >> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> > >> Cc: Linus Walleij <linus.walleij@linaro.org> > >> --- > >> arch/arm/boot/Makefile | 2 ++ > >> arch/arm/boot/dts/Makefile | 41 +++++++++++++++++++++++++++++++++ > >> arch/arm/mach-at91/Makefile.boot | 24 ------------------- > >> arch/arm/mach-exynos/Makefile.boot | 3 --- > >> arch/arm/mach-imx/Makefile.boot | 7 ------ > >> arch/arm/mach-kirkwood/Makefile.boot | 11 --------- > >> arch/arm/mach-lpc32xx/Makefile.boot | 2 -- > >> arch/arm/mach-mvebu/Makefile.boot | 2 -- > >> arch/arm/mach-mxs/Makefile.boot | 9 -------- > >> arch/arm/mach-spear13xx/Makefile.boot | 3 --- > >> arch/arm/mach-spear3xx/Makefile.boot | 4 ---- > >> arch/arm/mach-spear6xx/Makefile.boot | 2 -- > >> arch/arm/mach-tegra/Makefile.boot | 8 ------- > >> arch/arm/mach-ux500/Makefile.boot | 2 -- > >> arch/arm/mach-vexpress/Makefile.boot | 5 ---- > >> 15 files changed, 43 insertions(+), 82 deletions(-) > >> create mode 100644 arch/arm/boot/dts/Makefile > >> > >> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile > >> index c877087..3fdab01 100644 > >> --- a/arch/arm/boot/Makefile > >> +++ b/arch/arm/boot/Makefile > >> @@ -15,6 +15,8 @@ ifneq ($(MACHINE),) > >> include $(srctree)/$(MACHINE)/Makefile.boot > >> endif > >> > >> +include $(srctree)/arch/arm/boot/dts/Makefile > >> + > >> # Note: the following conditions must always be true: > >> # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) > >> # PARAMS_PHYS must be within 4MB of ZRELADDR > >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > >> new file mode 100644 > >> index 0000000..e59586b > >> --- /dev/null > >> +++ b/arch/arm/boot/dts/Makefile > >> @@ -0,0 +1,41 @@ > >> +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb > > sorry I see no need of the dtb-y > > > > just do all the time > > That's not how it works today. dtb's only for all enabled platforms are > built. Changing the behavior should be a different patch. no I see no point to check if the platform is enable or not just build all This will allow to check them Best Regards, J.
On 09/10/2012 10:49 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 12:51 Mon 10 Sep , Rob Herring wrote: >> On 09/10/2012 10:52 AM, Jean-Christophe PLAGNIOL-VILLARD wrote: >>> On 15:12 Thu 06 Sep , Rob Herring wrote: >>>> From: Rob Herring <rob.herring@calxeda.com> >>>> >>>> In preparation to support multi-platform kernels, move all the dtb targets >>>> out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile >>>> which is closer to the sources. >>>> >>>> Signed-off-by: Rob Herring <rob.herring@calxeda.com> >>>> Cc: Russell King <linux@arm.linux.org.uk> >>>> Cc: Andrew Victor <linux@maxim.org.za> >>>> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> >>>> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> >>>> Cc: Kukjin Kim <kgene.kim@samsung.com> >>>> Cc: Sascha Hauer <kernel@pengutronix.de> >>>> Cc: Jason Cooper <jason@lakedaemon.net> >>>> Cc: Andrew Lunn <andrew@lunn.ch> >>>> Cc: Gregory Clement <gregory.clement@free-electrons.com> >>>> Cc: Shawn Guo <shawn.guo@linaro.org> >>>> Cc: Viresh Kumar <viresh.linux@gmail.com> >>>> Cc: Shiraz Hashim <shiraz.hashim@st.com> >>>> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> >>>> Cc: Stephen Warren <swarren@wwwdotorg.org> >>>> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> >>>> Cc: Linus Walleij <linus.walleij@linaro.org> >>>> --- >>>> arch/arm/boot/Makefile | 2 ++ >>>> arch/arm/boot/dts/Makefile | 41 +++++++++++++++++++++++++++++++++ >>>> arch/arm/mach-at91/Makefile.boot | 24 ------------------- >>>> arch/arm/mach-exynos/Makefile.boot | 3 --- >>>> arch/arm/mach-imx/Makefile.boot | 7 ------ >>>> arch/arm/mach-kirkwood/Makefile.boot | 11 --------- >>>> arch/arm/mach-lpc32xx/Makefile.boot | 2 -- >>>> arch/arm/mach-mvebu/Makefile.boot | 2 -- >>>> arch/arm/mach-mxs/Makefile.boot | 9 -------- >>>> arch/arm/mach-spear13xx/Makefile.boot | 3 --- >>>> arch/arm/mach-spear3xx/Makefile.boot | 4 ---- >>>> arch/arm/mach-spear6xx/Makefile.boot | 2 -- >>>> arch/arm/mach-tegra/Makefile.boot | 8 ------- >>>> arch/arm/mach-ux500/Makefile.boot | 2 -- >>>> arch/arm/mach-vexpress/Makefile.boot | 5 ---- >>>> 15 files changed, 43 insertions(+), 82 deletions(-) >>>> create mode 100644 arch/arm/boot/dts/Makefile >>>> >>>> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile >>>> index c877087..3fdab01 100644 >>>> --- a/arch/arm/boot/Makefile >>>> +++ b/arch/arm/boot/Makefile >>>> @@ -15,6 +15,8 @@ ifneq ($(MACHINE),) >>>> include $(srctree)/$(MACHINE)/Makefile.boot >>>> endif >>>> >>>> +include $(srctree)/arch/arm/boot/dts/Makefile >>>> + >>>> # Note: the following conditions must always be true: >>>> # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) >>>> # PARAMS_PHYS must be within 4MB of ZRELADDR >>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>>> new file mode 100644 >>>> index 0000000..e59586b >>>> --- /dev/null >>>> +++ b/arch/arm/boot/dts/Makefile >>>> @@ -0,0 +1,41 @@ >>>> +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb >>> >>> sorry I see no need of the dtb-y >>> >>> just do all the time >> >> That's not how it works today. dtb's only for all enabled platforms are >> built. Changing the behavior should be a different patch. > > no I see no point to check if the platform is enable or not just build all > > This will allow to check them Why would I want to build 100 .dtbs that I don't care about? If I want to check them, I can either build all the defconfigs, or simply write a trivial sh for loop to loop over *.dts in the boot/dts directory.
On 09/06/2012 09:39 PM, Shawn Guo wrote: > On Thu, Sep 06, 2012 at 08:36:41PM -0600, Stephen Warren wrote: >> On 09/06/2012 08:27 PM, Shawn Guo wrote: >>> On Thu, Sep 06, 2012 at 03:12:50PM -0500, Rob Herring wrote: >>>> +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb >>>> +dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb >>>> +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb tegra20-paz00.dtb \ >>>> + tegra20-seaboard.dtb tegra20-trimslice.dtb tegra20-ventana.dtb \ >>>> + tegra20-whistler.dtb >> >> Hmm. The existing files all have one file per line, which makes >> adding/removing files have a little less impact; whole lines are >> added/removed rather than needing to reflow the whole list. Should we >> apply the same layout here too? >> > +1 Are you okay if I change i.MX entries to use CONFIG_ARCH_MXC instead of per SOC entries? I want to make things more consistent and primarily use the top level CONFIG_ARCH_xxx values. Rob
On Tue, Sep 11, 2012 at 07:02:58AM -0500, Rob Herring wrote: > Are you okay if I change i.MX entries to use CONFIG_ARCH_MXC instead of > per SOC entries? I want to make things more consistent and primarily use > the top level CONFIG_ARCH_xxx values. > Yes, I'm okay with that.
On 23:41 Mon 10 Sep , Stephen Warren wrote: > On 09/10/2012 10:49 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: > > On 12:51 Mon 10 Sep , Rob Herring wrote: > >> On 09/10/2012 10:52 AM, Jean-Christophe PLAGNIOL-VILLARD wrote: > >>> On 15:12 Thu 06 Sep , Rob Herring wrote: > >>>> From: Rob Herring <rob.herring@calxeda.com> > >>>> > >>>> In preparation to support multi-platform kernels, move all the dtb targets > >>>> out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile > >>>> which is closer to the sources. > >>>> > >>>> Signed-off-by: Rob Herring <rob.herring@calxeda.com> > >>>> Cc: Russell King <linux@arm.linux.org.uk> > >>>> Cc: Andrew Victor <linux@maxim.org.za> > >>>> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> > >>>> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> > >>>> Cc: Kukjin Kim <kgene.kim@samsung.com> > >>>> Cc: Sascha Hauer <kernel@pengutronix.de> > >>>> Cc: Jason Cooper <jason@lakedaemon.net> > >>>> Cc: Andrew Lunn <andrew@lunn.ch> > >>>> Cc: Gregory Clement <gregory.clement@free-electrons.com> > >>>> Cc: Shawn Guo <shawn.guo@linaro.org> > >>>> Cc: Viresh Kumar <viresh.linux@gmail.com> > >>>> Cc: Shiraz Hashim <shiraz.hashim@st.com> > >>>> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> > >>>> Cc: Stephen Warren <swarren@wwwdotorg.org> > >>>> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> > >>>> Cc: Linus Walleij <linus.walleij@linaro.org> > >>>> --- > >>>> arch/arm/boot/Makefile | 2 ++ > >>>> arch/arm/boot/dts/Makefile | 41 +++++++++++++++++++++++++++++++++ > >>>> arch/arm/mach-at91/Makefile.boot | 24 ------------------- > >>>> arch/arm/mach-exynos/Makefile.boot | 3 --- > >>>> arch/arm/mach-imx/Makefile.boot | 7 ------ > >>>> arch/arm/mach-kirkwood/Makefile.boot | 11 --------- > >>>> arch/arm/mach-lpc32xx/Makefile.boot | 2 -- > >>>> arch/arm/mach-mvebu/Makefile.boot | 2 -- > >>>> arch/arm/mach-mxs/Makefile.boot | 9 -------- > >>>> arch/arm/mach-spear13xx/Makefile.boot | 3 --- > >>>> arch/arm/mach-spear3xx/Makefile.boot | 4 ---- > >>>> arch/arm/mach-spear6xx/Makefile.boot | 2 -- > >>>> arch/arm/mach-tegra/Makefile.boot | 8 ------- > >>>> arch/arm/mach-ux500/Makefile.boot | 2 -- > >>>> arch/arm/mach-vexpress/Makefile.boot | 5 ---- > >>>> 15 files changed, 43 insertions(+), 82 deletions(-) > >>>> create mode 100644 arch/arm/boot/dts/Makefile > >>>> > >>>> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile > >>>> index c877087..3fdab01 100644 > >>>> --- a/arch/arm/boot/Makefile > >>>> +++ b/arch/arm/boot/Makefile > >>>> @@ -15,6 +15,8 @@ ifneq ($(MACHINE),) > >>>> include $(srctree)/$(MACHINE)/Makefile.boot > >>>> endif > >>>> > >>>> +include $(srctree)/arch/arm/boot/dts/Makefile > >>>> + > >>>> # Note: the following conditions must always be true: > >>>> # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) > >>>> # PARAMS_PHYS must be within 4MB of ZRELADDR > >>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > >>>> new file mode 100644 > >>>> index 0000000..e59586b > >>>> --- /dev/null > >>>> +++ b/arch/arm/boot/dts/Makefile > >>>> @@ -0,0 +1,41 @@ > >>>> +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb > >>> > >>> sorry I see no need of the dtb-y > >>> > >>> just do all the time > >> > >> That's not how it works today. dtb's only for all enabled platforms are > >> built. Changing the behavior should be a different patch. > > > > no I see no point to check if the platform is enable or not just build all > > > > This will allow to check them > > Why would I want to build 100 .dtbs that I don't care about? If I want > to check them, I can either build all the defconfigs, or simply write a > trivial sh for loop to loop over *.dts in the boot/dts directory. I do not like this idea to just build the dts per platform It save nearly no time to compile it just make it fragile to maintain Best Regards, J.
On 09/11/2012 08:25 AM, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 23:41 Mon 10 Sep , Stephen Warren wrote: >> On 09/10/2012 10:49 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: >>> On 12:51 Mon 10 Sep , Rob Herring wrote: >>>> On 09/10/2012 10:52 AM, Jean-Christophe PLAGNIOL-VILLARD wrote: >>>>> On 15:12 Thu 06 Sep , Rob Herring wrote: >>>>>> From: Rob Herring <rob.herring@calxeda.com> >>>>>> >>>>>> In preparation to support multi-platform kernels, move all the dtb targets >>>>>> out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile >>>>>> which is closer to the sources. >>>>>> >>>>>> Signed-off-by: Rob Herring <rob.herring@calxeda.com> >>>>>> Cc: Russell King <linux@arm.linux.org.uk> >>>>>> Cc: Andrew Victor <linux@maxim.org.za> >>>>>> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> >>>>>> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> >>>>>> Cc: Kukjin Kim <kgene.kim@samsung.com> >>>>>> Cc: Sascha Hauer <kernel@pengutronix.de> >>>>>> Cc: Jason Cooper <jason@lakedaemon.net> >>>>>> Cc: Andrew Lunn <andrew@lunn.ch> >>>>>> Cc: Gregory Clement <gregory.clement@free-electrons.com> >>>>>> Cc: Shawn Guo <shawn.guo@linaro.org> >>>>>> Cc: Viresh Kumar <viresh.linux@gmail.com> >>>>>> Cc: Shiraz Hashim <shiraz.hashim@st.com> >>>>>> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> >>>>>> Cc: Stephen Warren <swarren@wwwdotorg.org> >>>>>> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> >>>>>> Cc: Linus Walleij <linus.walleij@linaro.org> >>>>>> --- >>>>>> arch/arm/boot/Makefile | 2 ++ >>>>>> arch/arm/boot/dts/Makefile | 41 +++++++++++++++++++++++++++++++++ >>>>>> arch/arm/mach-at91/Makefile.boot | 24 ------------------- >>>>>> arch/arm/mach-exynos/Makefile.boot | 3 --- >>>>>> arch/arm/mach-imx/Makefile.boot | 7 ------ >>>>>> arch/arm/mach-kirkwood/Makefile.boot | 11 --------- >>>>>> arch/arm/mach-lpc32xx/Makefile.boot | 2 -- >>>>>> arch/arm/mach-mvebu/Makefile.boot | 2 -- >>>>>> arch/arm/mach-mxs/Makefile.boot | 9 -------- >>>>>> arch/arm/mach-spear13xx/Makefile.boot | 3 --- >>>>>> arch/arm/mach-spear3xx/Makefile.boot | 4 ---- >>>>>> arch/arm/mach-spear6xx/Makefile.boot | 2 -- >>>>>> arch/arm/mach-tegra/Makefile.boot | 8 ------- >>>>>> arch/arm/mach-ux500/Makefile.boot | 2 -- >>>>>> arch/arm/mach-vexpress/Makefile.boot | 5 ---- >>>>>> 15 files changed, 43 insertions(+), 82 deletions(-) >>>>>> create mode 100644 arch/arm/boot/dts/Makefile >>>>>> >>>>>> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile >>>>>> index c877087..3fdab01 100644 >>>>>> --- a/arch/arm/boot/Makefile >>>>>> +++ b/arch/arm/boot/Makefile >>>>>> @@ -15,6 +15,8 @@ ifneq ($(MACHINE),) >>>>>> include $(srctree)/$(MACHINE)/Makefile.boot >>>>>> endif >>>>>> >>>>>> +include $(srctree)/arch/arm/boot/dts/Makefile >>>>>> + >>>>>> # Note: the following conditions must always be true: >>>>>> # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) >>>>>> # PARAMS_PHYS must be within 4MB of ZRELADDR >>>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>>>>> new file mode 100644 >>>>>> index 0000000..e59586b >>>>>> --- /dev/null >>>>>> +++ b/arch/arm/boot/dts/Makefile >>>>>> @@ -0,0 +1,41 @@ >>>>>> +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb >>>>> >>>>> sorry I see no need of the dtb-y >>>>> >>>>> just do all the time >>>> >>>> That's not how it works today. dtb's only for all enabled platforms are >>>> built. Changing the behavior should be a different patch. >>> >>> no I see no point to check if the platform is enable or not just build all >>> >>> This will allow to check them >> >> Why would I want to build 100 .dtbs that I don't care about? If I want >> to check them, I can either build all the defconfigs, or simply write a >> trivial sh for loop to loop over *.dts in the boot/dts directory. > I do not like this idea to just build the dts per platform > > It save nearly no time to compile > > it just make it fragile to maintain That is arguably true for many config options... The dtbs will effectively all get enabled once platforms are converted over to multi-platform and we add some multi-platform defconfigs. make dtbs doesn't even build all dtbs today. It is only ones in Makefile.boot. Anyway, I still see this as a separate issue and new feature to be done separately if and when there is agreement. Rob
On Tue, 11 Sep 2012, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 23:41 Mon 10 Sep , Stephen Warren wrote: > > On 09/10/2012 10:49 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: > > > On 12:51 Mon 10 Sep , Rob Herring wrote: > > >> On 09/10/2012 10:52 AM, Jean-Christophe PLAGNIOL-VILLARD wrote: > > >>> On 15:12 Thu 06 Sep , Rob Herring wrote: > > >>>> From: Rob Herring <rob.herring@calxeda.com> > > >>>> > > >>>> In preparation to support multi-platform kernels, move all the dtb targets > > >>>> out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile > > >>>> which is closer to the sources. > > >>>> > > >>>> Signed-off-by: Rob Herring <rob.herring@calxeda.com> > > >>>> Cc: Russell King <linux@arm.linux.org.uk> > > >>>> Cc: Andrew Victor <linux@maxim.org.za> > > >>>> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> > > >>>> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> > > >>>> Cc: Kukjin Kim <kgene.kim@samsung.com> > > >>>> Cc: Sascha Hauer <kernel@pengutronix.de> > > >>>> Cc: Jason Cooper <jason@lakedaemon.net> > > >>>> Cc: Andrew Lunn <andrew@lunn.ch> > > >>>> Cc: Gregory Clement <gregory.clement@free-electrons.com> > > >>>> Cc: Shawn Guo <shawn.guo@linaro.org> > > >>>> Cc: Viresh Kumar <viresh.linux@gmail.com> > > >>>> Cc: Shiraz Hashim <shiraz.hashim@st.com> > > >>>> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> > > >>>> Cc: Stephen Warren <swarren@wwwdotorg.org> > > >>>> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> > > >>>> Cc: Linus Walleij <linus.walleij@linaro.org> > > >>>> --- > > >>>> arch/arm/boot/Makefile | 2 ++ > > >>>> arch/arm/boot/dts/Makefile | 41 +++++++++++++++++++++++++++++++++ > > >>>> arch/arm/mach-at91/Makefile.boot | 24 ------------------- > > >>>> arch/arm/mach-exynos/Makefile.boot | 3 --- > > >>>> arch/arm/mach-imx/Makefile.boot | 7 ------ > > >>>> arch/arm/mach-kirkwood/Makefile.boot | 11 --------- > > >>>> arch/arm/mach-lpc32xx/Makefile.boot | 2 -- > > >>>> arch/arm/mach-mvebu/Makefile.boot | 2 -- > > >>>> arch/arm/mach-mxs/Makefile.boot | 9 -------- > > >>>> arch/arm/mach-spear13xx/Makefile.boot | 3 --- > > >>>> arch/arm/mach-spear3xx/Makefile.boot | 4 ---- > > >>>> arch/arm/mach-spear6xx/Makefile.boot | 2 -- > > >>>> arch/arm/mach-tegra/Makefile.boot | 8 ------- > > >>>> arch/arm/mach-ux500/Makefile.boot | 2 -- > > >>>> arch/arm/mach-vexpress/Makefile.boot | 5 ---- > > >>>> 15 files changed, 43 insertions(+), 82 deletions(-) > > >>>> create mode 100644 arch/arm/boot/dts/Makefile > > >>>> > > >>>> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile > > >>>> index c877087..3fdab01 100644 > > >>>> --- a/arch/arm/boot/Makefile > > >>>> +++ b/arch/arm/boot/Makefile > > >>>> @@ -15,6 +15,8 @@ ifneq ($(MACHINE),) > > >>>> include $(srctree)/$(MACHINE)/Makefile.boot > > >>>> endif > > >>>> > > >>>> +include $(srctree)/arch/arm/boot/dts/Makefile > > >>>> + > > >>>> # Note: the following conditions must always be true: > > >>>> # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) > > >>>> # PARAMS_PHYS must be within 4MB of ZRELADDR > > >>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > >>>> new file mode 100644 > > >>>> index 0000000..e59586b > > >>>> --- /dev/null > > >>>> +++ b/arch/arm/boot/dts/Makefile > > >>>> @@ -0,0 +1,41 @@ > > >>>> +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb > > >>> > > >>> sorry I see no need of the dtb-y > > >>> > > >>> just do all the time > > >> > > >> That's not how it works today. dtb's only for all enabled platforms are > > >> built. Changing the behavior should be a different patch. > > > > > > no I see no point to check if the platform is enable or not just build all > > > > > > This will allow to check them > > > > Why would I want to build 100 .dtbs that I don't care about? If I want > > to check them, I can either build all the defconfigs, or simply write a > > trivial sh for loop to loop over *.dts in the boot/dts directory. > I do not like this idea to just build the dts per platform > > It save nearly no time to compile We could say the same thing for most drivers as well. But when you enable them all, the time adds up. And the result directory becomes cluttered with files unrelated to your configured target which is rather untidy. > it just make it fragile to maintain That isn't very convincing. Nicolas
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index c877087..3fdab01 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -15,6 +15,8 @@ ifneq ($(MACHINE),) include $(srctree)/$(MACHINE)/Makefile.boot endif +include $(srctree)/arch/arm/boot/dts/Makefile + # Note: the following conditions must always be true: # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile new file mode 100644 index 0000000..e59586b --- /dev/null +++ b/arch/arm/boot/dts/Makefile @@ -0,0 +1,41 @@ +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb +dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb tegra20-paz00.dtb \ + tegra20-seaboard.dtb tegra20-trimslice.dtb tegra20-ventana.dtb \ + tegra20-whistler.dtb +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb +dtb-$(CONFIG_BOARD_SPEAR600_DT) += spear600-evb.dtb +dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb armada-xp-db.dtb +dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb at91sam9263ek.dtb \ + at91sam9g20ek_2mmc.dtb at91sam9g20ek.dtb at91sam9g25ek.dtb \ + at91sam9m10g45ek.dtb at91sam9n12ek.dtb ethernut5.dtb evk-pro3.dtb \ + kizbox.dtb tny_a9260.dtb tny_a9263.dtb tny_a9g20.dtb usb_a9260.dtb \ + usb_a9263.dtb usb_a9g20.dtb +dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb kirkwood-dns325.dtb +dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb +dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb +dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb +dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb +dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb +dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb +dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb +dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \ + imx53-qsb.dtb imx53-smd.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb +dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb +dtb-$(CONFIG_MACH_SPEAR1310) += spear1310-evb.dtb +dtb-$(CONFIG_MACH_SPEAR1340) += spear1340-evb.dtb +dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb +dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb +dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb kirkwood-ts219-6282.dtb +dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb imx6q-sabrelite.dtb \ + imx6q-sabresd.dtb +dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb imx23-olinuxino.dtb \ + imx23-stmp378x_devb.dtb imx28-apx4devkit.dtb \ + imx28-cfa10036.dtb imx28-evk.dtb \ + imx28-m28evk.dtb imx28-tx28.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ + vexpress-v2p-ca9.dtb vexpress-v2p-ca15-tc1.dtb \ + vexpress-v2p-ca15_a7.dtb diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 30bb733..5309f9b 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -12,27 +12,3 @@ else params_phys-y := 0x20000100 initrd_phys-y := 0x20410000 endif - -# Keep dtb files sorted alphabetically for each SoC -# sam9260 -dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb -# sam9263 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb -# sam9g20 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb -# sam9g45 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb -# sam9n12 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb -# sam9x5 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot index 31bd181..b9862e2 100644 --- a/arch/arm/mach-exynos/Makefile.boot +++ b/arch/arm/mach-exynos/Makefile.boot @@ -1,5 +1,2 @@ zreladdr-y += 0x40008000 params_phys-y := 0x40000100 - -dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb -dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 05541cf..b27815d 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -37,10 +37,3 @@ initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000 zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 - -dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb -dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \ - imx53-qsb.dtb imx53-smd.dtb -dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb \ diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index a13299d..760a0ef 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -1,14 +1,3 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 - -dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb -dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb -dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb -dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb -dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb -dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb -dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb -dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb -dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb -dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot index 697323b..d7392a4 100644 --- a/arch/arm/mach-lpc32xx/Makefile.boot +++ b/arch/arm/mach-lpc32xx/Makefile.boot @@ -1,5 +1,3 @@ zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x82000000 - -dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb diff --git a/arch/arm/mach-mvebu/Makefile.boot b/arch/arm/mach-mvebu/Makefile.boot index 2579a2f..b327175 100644 --- a/arch/arm/mach-mvebu/Makefile.boot +++ b/arch/arm/mach-mvebu/Makefile.boot @@ -1,3 +1 @@ zreladdr-y := 0x00008000 -dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb -dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-xp-db.dtb diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot index 4582999..07b11fe 100644 --- a/arch/arm/mach-mxs/Makefile.boot +++ b/arch/arm/mach-mxs/Makefile.boot @@ -1,10 +1 @@ zreladdr-y += 0x40008000 - -dtb-y += imx23-evk.dtb \ - imx23-olinuxino.dtb \ - imx23-stmp378x_devb.dtb \ - imx28-apx4devkit.dtb \ - imx28-cfa10036.dtb \ - imx28-evk.dtb \ - imx28-m28evk.dtb \ - imx28-tx28.dtb \ diff --git a/arch/arm/mach-spear13xx/Makefile.boot b/arch/arm/mach-spear13xx/Makefile.boot index 403efd7..4674a4c 100644 --- a/arch/arm/mach-spear13xx/Makefile.boot +++ b/arch/arm/mach-spear13xx/Makefile.boot @@ -1,6 +1,3 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 - -dtb-$(CONFIG_MACH_SPEAR1310) += spear1310-evb.dtb -dtb-$(CONFIG_MACH_SPEAR1340) += spear1340-evb.dtb diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot index d93e217..4674a4c 100644 --- a/arch/arm/mach-spear3xx/Makefile.boot +++ b/arch/arm/mach-spear3xx/Makefile.boot @@ -1,7 +1,3 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 - -dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb -dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb -dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot index af493da..4674a4c 100644 --- a/arch/arm/mach-spear6xx/Makefile.boot +++ b/arch/arm/mach-spear6xx/Makefile.boot @@ -1,5 +1,3 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 - -dtb-$(CONFIG_BOARD_SPEAR600_DT) += spear600-evb.dtb diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 7a1bb62..2943381 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -1,11 +1,3 @@ zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 - -dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb -dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb -dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb -dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb -dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb -dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb -dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot index dd5cd00..760a0ef 100644 --- a/arch/arm/mach-ux500/Makefile.boot +++ b/arch/arm/mach-ux500/Makefile.boot @@ -1,5 +1,3 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 - -dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot index 318d308..c6dd891 100644 --- a/arch/arm/mach-vexpress/Makefile.boot +++ b/arch/arm/mach-vexpress/Makefile.boot @@ -3,8 +3,3 @@ zreladdr-y += 0x60008000 params_phys-y := 0x60000100 initrd_phys-y := 0x60800000 - -dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \ - vexpress-v2p-ca9.dtb \ - vexpress-v2p-ca15-tc1.dtb \ - vexpress-v2p-ca15_a7.dtb