| Message ID | 1346186104-4083-1-git-send-email-broonie@opensource.wolfsonmicro.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
Around Tue 28 Aug 2012 13:35:04 -0700 or thereabout, Mark Brown wrote: > Rather than requiring platforms to select the generic clock API to make > it available make the API available as a user selectable option unless the > user either selects HAVE_CUSTOM_CLK (if they have their own implementation) > or selects COMMON_CLK (if they depend on the generic implementation). > > All current architectures that HAVE_CLK but don't use the common clock > framework have selects of HAVE_CUSTOM_CLK added. > > This allows drivers to use the generic API on platforms which have no need > for the clock API at platform level. > > Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> > --- > > This depends on having one of the patches I've sent adding a generic > clkdev.h added merged - Arnd was expecting to merge one of those, there > was just the lack of clarity about the most practical Kbuild hookup. > > arch/arm/Kconfig | 12 ++++++++++++ > arch/avr32/Kconfig | 1 + For the AVR32 related changes Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> <snipp>
On 08/28/12 13:35, Mark Brown wrote: > Rather than requiring platforms to select the generic clock API to make > it available make the API available as a user selectable option unless the > user either selects HAVE_CUSTOM_CLK (if they have their own implementation) > or selects COMMON_CLK (if they depend on the generic implementation). > > All current architectures that HAVE_CLK but don't use the common clock > framework have selects of HAVE_CUSTOM_CLK added. > > This allows drivers to use the generic API on platforms which have no need > for the clock API at platform level. > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > @@ -674,6 +676,7 @@ config ARCH_TEGRA > select GENERIC_CLOCKEVENTS > select GENERIC_GPIO > select HAVE_CLK > + select HAVE_CUSTOM_CLK For 3.7, Tegra will switch to the common clock framework. I think this patch would then disable that. How should we resolve this - rebase the Tegra common-clk tree on top of any branch containing this patch in order to remove that select statement?
On Wed, Aug 29, 2012 at 02:49:34PM -0700, Stephen Warren wrote: > On 08/28/12 13:35, Mark Brown wrote: > >@@ -674,6 +676,7 @@ config ARCH_TEGRA > > select GENERIC_CLOCKEVENTS > > select GENERIC_GPIO > > select HAVE_CLK > >+ select HAVE_CUSTOM_CLK > For 3.7, Tegra will switch to the common clock framework. I think > this patch would then disable that. How should we resolve this - > rebase the Tegra common-clk tree on top of any branch containing > this patch in order to remove that select statement? I'd expect this to be applied on a separate branch so you should be able to rebase your conversion on top of it or merge it into your branch which should deal with things well enough I think?
On 08/30/12 10:19, Mark Brown wrote: > On Wed, Aug 29, 2012 at 02:49:34PM -0700, Stephen Warren wrote: >> On 08/28/12 13:35, Mark Brown wrote: > >>> @@ -674,6 +676,7 @@ config ARCH_TEGRA >>> select GENERIC_CLOCKEVENTS >>> select GENERIC_GPIO >>> select HAVE_CLK >>> + select HAVE_CUSTOM_CLK > >> For 3.7, Tegra will switch to the common clock framework. I think >> this patch would then disable that. How should we resolve this - >> rebase the Tegra common-clk tree on top of any branch containing >> this patch in order to remove that select statement? > > I'd expect this to be applied on a separate branch so you should be able > to rebase your conversion on top of it or merge it into your branch > which should deal with things well enough I think? That should work.
On Tue, 2012-08-28 at 13:35 -0700, Mark Brown wrote: > Rather than requiring platforms to select the generic clock API to make > it available make the API available as a user selectable option unless the > user either selects HAVE_CUSTOM_CLK (if they have their own implementation) > or selects COMMON_CLK (if they depend on the generic implementation). > > All current architectures that HAVE_CLK but don't use the common clock > framework have selects of HAVE_CUSTOM_CLK added. > > This allows drivers to use the generic API on platforms which have no need > for the clock API at platform level. > > Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> > --- For powerpc: Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cheers, Ben.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d4471d4..2a5633b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -330,6 +330,7 @@ config ARCH_VEXPRESS select COMMON_CLK select GENERIC_CLOCKEVENTS select HAVE_CLK + select HAVE_CUSTOM_CLK select HAVE_PATA_PLATFORM select ICST select NO_IOPORT @@ -343,6 +344,7 @@ config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select HAVE_CUSTOM_CLK select CLKDEV_LOOKUP select IRQ_DOMAIN select NEED_MACH_IO_H if PCCARD @@ -674,6 +676,7 @@ config ARCH_TEGRA select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_CLK + select HAVE_CUSTOM_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 select ARCH_HAS_CPUFREQ @@ -732,6 +735,7 @@ config ARCH_PXA config ARCH_MSM bool "Qualcomm MSM" select HAVE_CLK + select HAVE_CUSTOM_CLK select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP @@ -745,6 +749,7 @@ config ARCH_MSM config ARCH_SHMOBILE bool "Renesas SH-Mobile / R-Mobile" select HAVE_CLK + select HAVE_CUSTOM_CLK select CLKDEV_LOOKUP select HAVE_MACH_CLKDEV select HAVE_SMP @@ -798,6 +803,7 @@ config ARCH_S3C24XX select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK + select HAVE_CUSTOM_CLK select CLKDEV_LOOKUP select ARCH_USES_GETTIMEOFFSET select HAVE_S3C2410_I2C if I2C @@ -816,6 +822,7 @@ config ARCH_S3C64XX select CPU_V6 select ARM_VIC select HAVE_CLK + select HAVE_CUSTOM_CLK select HAVE_TCM select CLKDEV_LOOKUP select NO_IOPORT @@ -838,6 +845,7 @@ config ARCH_S5P64X0 select CPU_V6 select GENERIC_GPIO select HAVE_CLK + select HAVE_CUSTOM_CLK select CLKDEV_LOOKUP select CLKSRC_MMIO select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -852,6 +860,7 @@ config ARCH_S5PC100 bool "Samsung S5PC100" select GENERIC_GPIO select HAVE_CLK + select HAVE_CUSTOM_CLK select CLKDEV_LOOKUP select CPU_V7 select ARCH_USES_GETTIMEOFFSET @@ -868,6 +877,7 @@ config ARCH_S5PV210 select ARCH_HAS_HOLES_MEMORYMODEL select GENERIC_GPIO select HAVE_CLK + select HAVE_CUSTOM_CLK select CLKDEV_LOOKUP select CLKSRC_MMIO select ARCH_HAS_CPUFREQ @@ -886,6 +896,7 @@ config ARCH_EXYNOS select ARCH_HAS_HOLES_MEMORYMODEL select GENERIC_GPIO select HAVE_CLK + select HAVE_CUSTOM_CLK select CLKDEV_LOOKUP select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS @@ -972,6 +983,7 @@ config ARCH_OMAP bool "TI OMAP" depends on MMU select HAVE_CLK + select HAVE_CUSTOM_CLK select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ select CLKSRC_MMIO diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 06e73bf..bfeb9cc 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -4,6 +4,7 @@ config AVR32 # that we usually don't need on AVR32. select EXPERT select HAVE_CLK + select HAVE_CUSTOM_CLK select HAVE_OPROFILE select HAVE_KPROBES select HAVE_GENERIC_HARDIRQS diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 641d067..27dfc99 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -84,6 +84,7 @@ config AR7 select ARCH_REQUIRE_GPIOLIB select VLYNQ select HAVE_CLK + select HAVE_CUSTOM_CLK help Support for the Texas Instruments AR7 System-on-a-Chip family: TNETD7100, 7200 and 7300. @@ -96,6 +97,7 @@ config ATH79 select CSRC_R4K select DMA_NONCOHERENT select HAVE_CLK + select HAVE_CUSTOM_CLK select IRQ_CPU select MIPS_MACHINE select SYS_HAS_CPU_MIPS32_R2 @@ -133,6 +135,7 @@ config BCM63XX select SWAP_IO_SPACE select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select HAVE_CUSTOM_CLK help Support for BCM63XX based boards @@ -228,6 +231,7 @@ config MACH_JZ4740 select SYS_HAS_EARLY_PRINTK select HAVE_PWM select HAVE_CLK + select HAVE_CUSTOM_CLK select GENERIC_IRQ_CHIP config LANTIQ diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index 263beb9..ed42be1 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -42,6 +42,7 @@ config LEMOTE_MACH2F select DMA_NONCOHERENT select GENERIC_ISA_DMA_SUPPORT_BROKEN select HAVE_CLK + select HAVE_CUSTOM_CLK select HW_HAS_PCI select I8259 select IRQ_CPU diff --git a/arch/mips/loongson1/Kconfig b/arch/mips/loongson1/Kconfig index a9a14d6..ddaa7d0 100644 --- a/arch/mips/loongson1/Kconfig +++ b/arch/mips/loongson1/Kconfig @@ -16,6 +16,7 @@ config LOONGSON1_LS1B select SYS_SUPPORTS_HIGHMEM select SYS_HAS_EARLY_PRINTK select HAVE_CLK + select HAVE_CUSTOM_CLK endchoice diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 6d40bc7..04e3cdb 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -21,6 +21,7 @@ config MACH_TXX9 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN select HAVE_CLK + select HAVE_CUSTOM_CLK config TOSHIBA_JMR3927 bool "Toshiba JMR-TX3927 board" diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 58088dd..b7a611b 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -1013,6 +1013,7 @@ config PPC_CLOCK bool default n select HAVE_CLK + select HAVE_CUSTOM_CLK config PPC_LIB_RHEAP bool diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index 5d53ffd..fe30bb1 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -89,6 +89,7 @@ config ARCH_PUV3 select CPU_UCV2 select GENERIC_CLOCKEVENTS select HAVE_CLK + select HAVE_CUSTOM_CLK select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 7f0b5ca..e94fd06 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -9,16 +9,23 @@ config HAVE_CLK_PREPARE config HAVE_MACH_CLKDEV bool -config COMMON_CLK +config HAVE_CUSTOM_CLK bool + ---help--- + Architectures which provide a custom clk API should select + this to disable the common clock API. + +config COMMON_CLK + bool "Common clock framework" + depends on !HAVE_CUSTOM_CLK select HAVE_CLK_PREPARE select CLKDEV_LOOKUP ---help--- The common clock framework is a single definition of struct clk, useful across many platforms, as well as an implementation of the clock API in include/linux/clk.h. - Architectures utilizing the common struct clk should select - this option. + This provides a generic way for drivers to provide and use + clocks without hard coded relationships in the drivers. menu "Common Clock Framework" depends on COMMON_CLK
Rather than requiring platforms to select the generic clock API to make it available make the API available as a user selectable option unless the user either selects HAVE_CUSTOM_CLK (if they have their own implementation) or selects COMMON_CLK (if they depend on the generic implementation). All current architectures that HAVE_CLK but don't use the common clock framework have selects of HAVE_CUSTOM_CLK added. This allows drivers to use the generic API on platforms which have no need for the clock API at platform level. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> --- This depends on having one of the patches I've sent adding a generic clkdev.h added merged - Arnd was expecting to merge one of those, there was just the lack of clarity about the most practical Kbuild hookup. arch/arm/Kconfig | 12 ++++++++++++ arch/avr32/Kconfig | 1 + arch/mips/Kconfig | 4 ++++ arch/mips/loongson/Kconfig | 1 + arch/mips/loongson1/Kconfig | 1 + arch/mips/txx9/Kconfig | 1 + arch/powerpc/Kconfig | 1 + arch/unicore32/Kconfig | 1 + drivers/clk/Kconfig | 13 ++++++++++--- 9 files changed, 32 insertions(+), 3 deletions(-)