Message ID | 1346182146-1154-1-git-send-email-fabio.estevam@freescale.com |
---|---|
State | Awaiting Upstream |
Delegated to: | Stefano Babic |
Headers | show |
Dear Fabio Estevam, > Recent conversion from mx28_adjust_memory_params to > mxs_adjust_memory_params missed to update mx28evk, which caused the board > not to boot. Oh of course ... that's an obvious flub. I'm very unhappy about the conversion causing such trouble! Please be more careful next time. > Apply the conversion so that the board can boot again. Yes, Acked-by: Marek Vasut <marex@denx.de> > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- > board/freescale/mx28evk/iomux.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/freescale/mx28evk/iomux.c > b/board/freescale/mx28evk/iomux.c index 16a6d8a..ae6eda3 100644 > --- a/board/freescale/mx28evk/iomux.c > +++ b/board/freescale/mx28evk/iomux.c > @@ -173,7 +173,7 @@ const iomux_cfg_t iomux_setup[] = { > #define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \ > ADDR_PINS << 8 | APREBIT) > > -void mx28_adjust_memory_params(uint32_t *dram_vals) > +void mxs_adjust_memory_params(uint32_t *dram_vals) > { > dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG; > } Best regards, Marek Vasut
Dear Marek Vasut, > Dear Fabio Estevam, > > > Recent conversion from mx28_adjust_memory_params to > > mxs_adjust_memory_params missed to update mx28evk, which caused the board > > not to boot. > > Oh of course ... that's an obvious flub. I'm very unhappy about the > conversion causing such trouble! Please be more careful next time. btw. Otavio, tell me if this tortured you enough ... gotta train this, I'm not good at it yet, but fear, soon I'll improve ;-) > > Apply the conversion so that the board can boot again. > > Yes, > > Acked-by: Marek Vasut <marex@denx.de> > > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > > --- > > > > board/freescale/mx28evk/iomux.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/board/freescale/mx28evk/iomux.c > > b/board/freescale/mx28evk/iomux.c index 16a6d8a..ae6eda3 100644 > > --- a/board/freescale/mx28evk/iomux.c > > +++ b/board/freescale/mx28evk/iomux.c > > @@ -173,7 +173,7 @@ const iomux_cfg_t iomux_setup[] = { > > > > #define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \ > > > > ADDR_PINS << 8 | APREBIT) > > > > -void mx28_adjust_memory_params(uint32_t *dram_vals) > > +void mxs_adjust_memory_params(uint32_t *dram_vals) > > > > { > > > > dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG; > > > > } > > Best regards, > Marek Vasut Best regards, Marek Vasut
On Tue, Aug 28, 2012 at 4:36 PM, Marek Vasut <marex@denx.de> wrote: > Dear Fabio Estevam, > >> Recent conversion from mx28_adjust_memory_params to >> mxs_adjust_memory_params missed to update mx28evk, which caused the board >> not to boot. > > Oh of course ... that's an obvious flub. I'm very unhappy about the conversion > causing such trouble! Please be more careful next time. This was my fault; but good that Fabio has spot it fast. >> Apply the conversion so that the board can boot again. > > Yes, > > Acked-by: Marek Vasut <marex@denx.de> > >> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> >> --- >> board/freescale/mx28evk/iomux.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/board/freescale/mx28evk/iomux.c >> b/board/freescale/mx28evk/iomux.c index 16a6d8a..ae6eda3 100644 >> --- a/board/freescale/mx28evk/iomux.c >> +++ b/board/freescale/mx28evk/iomux.c >> @@ -173,7 +173,7 @@ const iomux_cfg_t iomux_setup[] = { >> #define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \ >> ADDR_PINS << 8 | APREBIT) >> >> -void mx28_adjust_memory_params(uint32_t *dram_vals) >> +void mxs_adjust_memory_params(uint32_t *dram_vals) >> { >> dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG; >> } > > Best regards, > Marek Vasut
Hi Stefano, On Tue, Aug 28, 2012 at 4:29 PM, Fabio Estevam <fabio.estevam@freescale.com> wrote: > Recent conversion from mx28_adjust_memory_params to mxs_adjust_memory_params > missed to update mx28evk, which caused the board not to boot. > > Apply the conversion so that the board can boot again. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Could this one be applied, please? Without this patch, mx28evk does not boot. Thanks, Fabio Estevam
On 03/09/2012 18:47, Fabio Estevam wrote: > Hi Stefano, > > On Tue, Aug 28, 2012 at 4:29 PM, Fabio Estevam > <fabio.estevam@freescale.com> wrote: >> Recent conversion from mx28_adjust_memory_params to mxs_adjust_memory_params >> missed to update mx28evk, which caused the board not to boot. >> >> Apply the conversion so that the board can boot again. >> >> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > > Could this one be applied, please? > > Without this patch, mx28evk does not boot. Sorry - I will merge it soon. Cheers, Stefano
On 28/08/2012 21:29, Fabio Estevam wrote: > Recent conversion from mx28_adjust_memory_params to mxs_adjust_memory_params > missed to update mx28evk, which caused the board not to boot. > > Apply the conversion so that the board can boot again. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- Applied to u-boot-imx, thanks. Best regards, Stefano Babic
diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk/iomux.c index 16a6d8a..ae6eda3 100644 --- a/board/freescale/mx28evk/iomux.c +++ b/board/freescale/mx28evk/iomux.c @@ -173,7 +173,7 @@ const iomux_cfg_t iomux_setup[] = { #define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \ ADDR_PINS << 8 | APREBIT) -void mx28_adjust_memory_params(uint32_t *dram_vals) +void mxs_adjust_memory_params(uint32_t *dram_vals) { dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG; }
Recent conversion from mx28_adjust_memory_params to mxs_adjust_memory_params missed to update mx28evk, which caused the board not to boot. Apply the conversion so that the board can boot again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- board/freescale/mx28evk/iomux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)