@@ -51,7 +51,8 @@ config MTD_UBI_BEB_LIMIT
MTD partitions of the same size, UBI will reserve 40 eraseblocks when
attaching a partition.
- This option can be overridden by the kernel parameter ubi.mtd.
+ This option can be overridden by the kernel parameter ubi.mtd and the
+ ioctl UBI_IOCATT.
Leave the default value if unsure.
@@ -1011,7 +1011,7 @@ static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd,
*/
mutex_lock(&ubi_devices_mutex);
err = ubi_attach_mtd_dev(mtd, req.ubi_num, req.vid_hdr_offset,
- CONFIG_MTD_UBI_BEB_LIMIT);
+ req.max_beb_per1024);
mutex_unlock(&ubi_devices_mutex);
if (err < 0)
put_mtd_device(mtd);
@@ -222,6 +222,7 @@ enum {
* @ubi_num: UBI device number to create
* @mtd_num: MTD device number to attach
* @vid_hdr_offset: VID header offset (use defaults if %0)
+ * @max_beb_per1024: Maximum expected bad eraseblocks per 1024 eraseblocks
* @padding: reserved for future, not used, has to be zeroed
*
* This data structure is used to specify MTD device UBI has to attach and the
@@ -245,12 +246,28 @@ enum {
* be 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
* aligned, which is OK, as UBI is clever enough to realize this is 4th
* sub-page of the first page and add needed padding.
+ *
+ * The @max_beb_per1024 is the maximum bad eraseblocks UBI expects on the ubi
+ * device per 1024 eraseblocks.
+ * This value is often given in an other form in the NAND datasheet (min NVB
+ * i.e. minimal number of valid blocks). The maximum expected bad eraseblocks
+ * per 1024 is then:
+ * 1024 * (1 - MinNVB / MaxNVB)
+ * Which gives 20 for most NAND devices.
+ * This limit is used in order to derive amount of eraseblock UBI reserves for
+ * handling new bad blocks.
+ * If the device has more bad eraseblocks than this limit, UBI does not reserve
+ * any physical eraseblocks for new bad eraseblocks, but attempts to use
+ * available eraseblocks (if any).
+ * The accepted range is 0-255. If 0 is given, the default kernel config value
+ * CONFIG_MTD_UBI_BEB_LIMIT will be used for compatibility.
*/
struct ubi_attach_req {
__s32 ubi_num;
__s32 mtd_num;
__s32 vid_hdr_offset;
- __s8 padding[12];
+ __u8 max_beb_per1024;
+ __s8 padding[11];
};
/**
This patch provides the possibility to adjust the "maximum expected number of bad blocks per 1024 blocks" (max_beb_per1024) for each mtd device from UBI_IOCATT ioctl. The majority of NAND devices have their max_beb_per1024 equal to 20, but sometimes it's more. We already could adjust that via a kernel parameter, now we can also use UBI_IOCATT ioctl: struct ubi_attach_req { __s32 ubi_num; __s32 mtd_num; __s32 vid_hdr_offset; __u8 max_beb_per1024; __s8 padding[11]; }; Signed-off-by: Richard Genoud <richard.genoud@gmail.com> --- drivers/mtd/ubi/Kconfig | 3 ++- drivers/mtd/ubi/cdev.c | 2 +- include/mtd/ubi-user.h | 19 ++++++++++++++++++- 3 files changed, 21 insertions(+), 3 deletions(-)