diff mbox

[U-Boot,03/10] mx5 clocks: Add and use CCSR definitions

Message ID 1672968487.2408577.1344967615049.JavaMail.root@advansee.com
State Superseded
Delegated to: Stefano Babic
Headers show

Commit Message

Benoît Thébaudeau Aug. 14, 2012, 6:06 p.m. UTC 
This fixes config_pll_clk(), which used 0x20 instead of 0x200 for PLL4_CLOCK. 

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
---
 .../arch/arm/cpu/armv7/mx5/clock.c                 |   34 +++++++++++++-------
 .../arch/arm/include/asm/arch-mx5/crm_regs.h       |   17 ++++++++++
 2 files changed, 40 insertions(+), 11 deletions(-)

Comments

Marek Vasut Aug. 14, 2012, 6:55 p.m. UTC | #1 
Dear Benoît Thébaudeau,

> This fixes config_pll_clk(), which used 0x20 instead of 0x200 for
> PLL4_CLOCK.
> 
> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
>  .../arch/arm/cpu/armv7/mx5/clock.c                 |   34
> +++++++++++++------- .../arch/arm/include/asm/arch-mx5/crm_regs.h       | 
>  17 ++++++++++ 2 files changed, 40 insertions(+), 11 deletions(-)
> 
> diff --git u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/clock.c
> u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/clock.c index 9b083c0..10843a4
> 100644
> --- u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/clock.c
> +++ u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/clock.c
> @@ -36,7 +36,9 @@ enum pll_clocks {
>  	PLL1_CLOCK = 0,
>  	PLL2_CLOCK,
>  	PLL3_CLOCK,
> +#ifdef CONFIG_MX53
>  	PLL4_CLOCK,
> +#endif
>  	PLL_CLOCKS,
>  };
> 
> @@ -379,10 +381,10 @@ static u32 get_lp_apm(void)
>  	u32 ret_val = 0;
>  	u32 ccsr = __raw_readl(&mxc_ccm->ccsr);
> 
> -	if (((ccsr >> 9) & 1) == 0)
> -		ret_val = CONFIG_SYS_MX5_HCLK;
> +	if (ccsr & MXC_CCM_CCSR_LP_APM)
> +		ret_val = 32768 * 1024;
>  	else
> -		ret_val = ((32768 * 1024));
> +		ret_val = CONFIG_SYS_MX5_HCLK;
> 
>  	return ret_val;
>  }
> @@ -660,40 +662,50 @@ static int config_pll_clk(enum pll_clocks index,
> struct pll_param *pll_param) switch (index) {
>  	case PLL1_CLOCK:
>  		/* Switch ARM to PLL2 clock */
> -		__raw_writel(ccsr | 0x4, &mxc_ccm->ccsr);
> +		__raw_writel(ccsr | MXC_CCM_CCSR_PLL1_SW_CLK_SEL,
> +				&mxc_ccm->ccsr);
>  		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
>  					pll_param->mfi, pll_param->mfn,
>  					pll_param->mfd);
>  		/* Switch back */
> -		__raw_writel(ccsr & ~0x4, &mxc_ccm->ccsr);
> +		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL,
> +				&mxc_ccm->ccsr);

Why use __raw_writel() instead of writel() ? Besides ... again, 
clrsetbits_le32() is a better bet.

>  		break;
>  	case PLL2_CLOCK:
>  		/* Switch to pll2 bypass clock */
> -		__raw_writel(ccsr | 0x2, &mxc_ccm->ccsr);
> +		__raw_writel(ccsr | MXC_CCM_CCSR_PLL2_SW_CLK_SEL,
> +				&mxc_ccm->ccsr);
>  		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
>  					pll_param->mfi, pll_param->mfn,
>  					pll_param->mfd);
>  		/* Switch back */
> -		__raw_writel(ccsr & ~0x2, &mxc_ccm->ccsr);
> +		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL,
> +				&mxc_ccm->ccsr);
>  		break;
>  	case PLL3_CLOCK:
>  		/* Switch to pll3 bypass clock */
> -		__raw_writel(ccsr | 0x1, &mxc_ccm->ccsr);
> +		__raw_writel(ccsr | MXC_CCM_CCSR_PLL3_SW_CLK_SEL,
> +				&mxc_ccm->ccsr);
>  		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
>  					pll_param->mfi, pll_param->mfn,
>  					pll_param->mfd);
>  		/* Switch back */
> -		__raw_writel(ccsr & ~0x1, &mxc_ccm->ccsr);
> +		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL3_SW_CLK_SEL,
> +				&mxc_ccm->ccsr);
>  		break;
> +#ifdef CONFIG_MX53
>  	case PLL4_CLOCK:
>  		/* Switch to pll4 bypass clock */
> -		__raw_writel(ccsr | 0x20, &mxc_ccm->ccsr);
> +		__raw_writel(ccsr | MXC_CCM_CCSR_PLL4_SW_CLK_SEL,
> +				&mxc_ccm->ccsr);
>  		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
>  					pll_param->mfi, pll_param->mfn,
>  					pll_param->mfd);
>  		/* Switch back */
> -		__raw_writel(ccsr & ~0x20, &mxc_ccm->ccsr);
> +		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL4_SW_CLK_SEL,
> +				&mxc_ccm->ccsr);
>  		break;
> +#endif
>  	default:
>  		return -EINVAL;
>  	}
> diff --git u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx5/crm_regs.h
> u-boot-4d3c95f/arch/arm/include/asm/arch-mx5/crm_regs.h index
> 4fd8dba..7c21351 100644
> --- u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx5/crm_regs.h
> +++ u-boot-4d3c95f/arch/arm/include/asm/arch-mx5/crm_regs.h
> @@ -82,6 +82,23 @@ struct mxc_ccm_reg {
>  	u32 cmeor;
>  };
> 
> +/* Define the bits in register CCSR */
> +#if defined(CONFIG_MX51)
> +#define MXC_CCM_CCSR_LP_APM			(0x1 << 9)
> +#elif defined(CONFIG_MX53)
> +#define MXC_CCM_CCSR_LP_APM			(0x1 << 10)
> +#define MXC_CCM_CCSR_PLL4_SW_CLK_SEL		(0x1 << 9)
> +#endif
> +#define MXC_CCM_CCSR_STEP_SEL_OFFSET		7
> +#define MXC_CCM_CCSR_STEP_SEL_MASK		(0x3 << 7)
> +#define MXC_CCM_CCSR_PLL2_DIV_PODF_OFFSET	5
> +#define MXC_CCM_CCSR_PLL2_DIV_PODF_MASK		(0x3 << 5)
> +#define MXC_CCM_CCSR_PLL3_DIV_PODF_OFFSET	3
> +#define MXC_CCM_CCSR_PLL3_DIV_PODF_MASK		(0x3 << 3)
> +#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL		(0x1 << 2)
> +#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL		(0x1 << 1)
> +#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL		0x1
> +
>  /* Define the bits in register CACRR */
>  #define MXC_CCM_CACRR_ARM_PODF_OFFSET		0
>  #define MXC_CCM_CACRR_ARM_PODF_MASK		0x7
Marek Vasut Aug. 14, 2012, 7:11 p.m. UTC | #2 
Dear Benoît Thébaudeau,

> Dear Marek Vasut,
> 
> > Dear Benoît Thébaudeau,
> > 
> > > This fixes config_pll_clk(), which used 0x20 instead of 0x200 for
> > > PLL4_CLOCK.
> > > 
> > > Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
> > > Cc: Stefano Babic <sbabic@denx.de>
> > > ---
> > > 
> > >  .../arch/arm/cpu/armv7/mx5/clock.c                 |   34
> > > 
> > > +++++++++++++------- .../arch/arm/include/asm/arch-mx5/crm_regs.h
> > > 
> > >  17 ++++++++++ 2 files changed, 40 insertions(+), 11 deletions(-)
> > > 
> > > diff --git u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/clock.c
> > > u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/clock.c index
> > > 9b083c0..10843a4
> > > 100644
> > > --- u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/clock.c
> > > +++ u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/clock.c
> > > @@ -36,7 +36,9 @@ enum pll_clocks {
> > > 
> > >  	PLL1_CLOCK = 0,
> > >  	PLL2_CLOCK,
> > >  	PLL3_CLOCK,
> > > 
> > > +#ifdef CONFIG_MX53
> > > 
> > >  	PLL4_CLOCK,
> > > 
> > > +#endif
> > > 
> > >  	PLL_CLOCKS,
> > >  
> > >  };
> > > 
> > > @@ -379,10 +381,10 @@ static u32 get_lp_apm(void)
> > > 
> > >  	u32 ret_val = 0;
> > >  	u32 ccsr = __raw_readl(&mxc_ccm->ccsr);
> > > 
> > > -	if (((ccsr >> 9) & 1) == 0)
> > > -		ret_val = CONFIG_SYS_MX5_HCLK;
> > > +	if (ccsr & MXC_CCM_CCSR_LP_APM)
> > > +		ret_val = 32768 * 1024;
> > > 
> > >  	else
> > > 
> > > -		ret_val = ((32768 * 1024));
> > > +		ret_val = CONFIG_SYS_MX5_HCLK;
> > > 
> > >  	return ret_val;
> > >  
> > >  }
> > > 
> > > @@ -660,40 +662,50 @@ static int config_pll_clk(enum pll_clocks
> > > index,
> > > struct pll_param *pll_param) switch (index) {
> > > 
> > >  	case PLL1_CLOCK:
> > >  		/* Switch ARM to PLL2 clock */
> > > 
> > > -		__raw_writel(ccsr | 0x4, &mxc_ccm->ccsr);
> > > +		__raw_writel(ccsr | MXC_CCM_CCSR_PLL1_SW_CLK_SEL,
> > > +				&mxc_ccm->ccsr);
> > > 
> > >  		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
> > >  		
> > >  					pll_param->mfi, pll_param->mfn,
> > >  					pll_param->mfd);
> > >  		
> > >  		/* Switch back */
> > > 
> > > -		__raw_writel(ccsr & ~0x4, &mxc_ccm->ccsr);
> > > +		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL,
> > > +				&mxc_ccm->ccsr);
> > 
> > Why use __raw_writel() instead of writel() ? Besides ... again,
> > clrsetbits_le32() is a better bet.
> 
> Sure, but it's again for consistency with the existing code.

Existing code looks crappy, any reason to not fix it ;-)
[...]
Benoît Thébaudeau Aug. 14, 2012, 7:14 p.m. UTC | #3 
Dear Marek Vasut,

> Dear Benoît Thébaudeau,
> 
> > This fixes config_pll_clk(), which used 0x20 instead of 0x200 for
> > PLL4_CLOCK.
> > 
> > Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
> > Cc: Stefano Babic <sbabic@denx.de>
> > ---
> >  .../arch/arm/cpu/armv7/mx5/clock.c                 |   34
> > +++++++++++++------- .../arch/arm/include/asm/arch-mx5/crm_regs.h
> >       |
> >  17 ++++++++++ 2 files changed, 40 insertions(+), 11 deletions(-)
> > 
> > diff --git u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/clock.c
> > u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/clock.c index
> > 9b083c0..10843a4
> > 100644
> > --- u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/clock.c
> > +++ u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/clock.c
> > @@ -36,7 +36,9 @@ enum pll_clocks {
> >  	PLL1_CLOCK = 0,
> >  	PLL2_CLOCK,
> >  	PLL3_CLOCK,
> > +#ifdef CONFIG_MX53
> >  	PLL4_CLOCK,
> > +#endif
> >  	PLL_CLOCKS,
> >  };
> > 
> > @@ -379,10 +381,10 @@ static u32 get_lp_apm(void)
> >  	u32 ret_val = 0;
> >  	u32 ccsr = __raw_readl(&mxc_ccm->ccsr);
> > 
> > -	if (((ccsr >> 9) & 1) == 0)
> > -		ret_val = CONFIG_SYS_MX5_HCLK;
> > +	if (ccsr & MXC_CCM_CCSR_LP_APM)
> > +		ret_val = 32768 * 1024;
> >  	else
> > -		ret_val = ((32768 * 1024));
> > +		ret_val = CONFIG_SYS_MX5_HCLK;
> > 
> >  	return ret_val;
> >  }
> > @@ -660,40 +662,50 @@ static int config_pll_clk(enum pll_clocks
> > index,
> > struct pll_param *pll_param) switch (index) {
> >  	case PLL1_CLOCK:
> >  		/* Switch ARM to PLL2 clock */
> > -		__raw_writel(ccsr | 0x4, &mxc_ccm->ccsr);
> > +		__raw_writel(ccsr | MXC_CCM_CCSR_PLL1_SW_CLK_SEL,
> > +				&mxc_ccm->ccsr);
> >  		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
> >  					pll_param->mfi, pll_param->mfn,
> >  					pll_param->mfd);
> >  		/* Switch back */
> > -		__raw_writel(ccsr & ~0x4, &mxc_ccm->ccsr);
> > +		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL,
> > +				&mxc_ccm->ccsr);
> 
> Why use __raw_writel() instead of writel() ? Besides ... again,
> clrsetbits_le32() is a better bet.

Sure, but it's again for consistency with the existing code.

> >  		break;
> >  	case PLL2_CLOCK:
> >  		/* Switch to pll2 bypass clock */
> > -		__raw_writel(ccsr | 0x2, &mxc_ccm->ccsr);
> > +		__raw_writel(ccsr | MXC_CCM_CCSR_PLL2_SW_CLK_SEL,
> > +				&mxc_ccm->ccsr);
> >  		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
> >  					pll_param->mfi, pll_param->mfn,
> >  					pll_param->mfd);
> >  		/* Switch back */
> > -		__raw_writel(ccsr & ~0x2, &mxc_ccm->ccsr);
> > +		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL,
> > +				&mxc_ccm->ccsr);
> >  		break;
> >  	case PLL3_CLOCK:
> >  		/* Switch to pll3 bypass clock */
> > -		__raw_writel(ccsr | 0x1, &mxc_ccm->ccsr);
> > +		__raw_writel(ccsr | MXC_CCM_CCSR_PLL3_SW_CLK_SEL,
> > +				&mxc_ccm->ccsr);
> >  		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
> >  					pll_param->mfi, pll_param->mfn,
> >  					pll_param->mfd);
> >  		/* Switch back */
> > -		__raw_writel(ccsr & ~0x1, &mxc_ccm->ccsr);
> > +		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL3_SW_CLK_SEL,
> > +				&mxc_ccm->ccsr);
> >  		break;
> > +#ifdef CONFIG_MX53
> >  	case PLL4_CLOCK:
> >  		/* Switch to pll4 bypass clock */
> > -		__raw_writel(ccsr | 0x20, &mxc_ccm->ccsr);
> > +		__raw_writel(ccsr | MXC_CCM_CCSR_PLL4_SW_CLK_SEL,
> > +				&mxc_ccm->ccsr);
> >  		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
> >  					pll_param->mfi, pll_param->mfn,
> >  					pll_param->mfd);
> >  		/* Switch back */
> > -		__raw_writel(ccsr & ~0x20, &mxc_ccm->ccsr);
> > +		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL4_SW_CLK_SEL,
> > +				&mxc_ccm->ccsr);
> >  		break;
> > +#endif
> >  	default:
> >  		return -EINVAL;
> >  	}
> > diff --git
> > u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx5/crm_regs.h
> > u-boot-4d3c95f/arch/arm/include/asm/arch-mx5/crm_regs.h index
> > 4fd8dba..7c21351 100644
> > --- u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx5/crm_regs.h
> > +++ u-boot-4d3c95f/arch/arm/include/asm/arch-mx5/crm_regs.h
> > @@ -82,6 +82,23 @@ struct mxc_ccm_reg {
> >  	u32 cmeor;
> >  };
> > 
> > +/* Define the bits in register CCSR */
> > +#if defined(CONFIG_MX51)
> > +#define MXC_CCM_CCSR_LP_APM			(0x1 << 9)
> > +#elif defined(CONFIG_MX53)
> > +#define MXC_CCM_CCSR_LP_APM			(0x1 << 10)
> > +#define MXC_CCM_CCSR_PLL4_SW_CLK_SEL		(0x1 << 9)
> > +#endif
> > +#define MXC_CCM_CCSR_STEP_SEL_OFFSET		7
> > +#define MXC_CCM_CCSR_STEP_SEL_MASK		(0x3 << 7)
> > +#define MXC_CCM_CCSR_PLL2_DIV_PODF_OFFSET	5
> > +#define MXC_CCM_CCSR_PLL2_DIV_PODF_MASK		(0x3 << 5)
> > +#define MXC_CCM_CCSR_PLL3_DIV_PODF_OFFSET	3
> > +#define MXC_CCM_CCSR_PLL3_DIV_PODF_MASK		(0x3 << 3)
> > +#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL		(0x1 << 2)
> > +#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL		(0x1 << 1)
> > +#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL		0x1
> > +
> >  /* Define the bits in register CACRR */
> >  #define MXC_CCM_CACRR_ARM_PODF_OFFSET		0
> >  #define MXC_CCM_CACRR_ARM_PODF_MASK		0x7
> 

Best regards,
Benoît
diff mbox

Patch

diff --git u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/clock.c u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/clock.c
index 9b083c0..10843a4 100644
--- u-boot-4d3c95f.orig/arch/arm/cpu/armv7/mx5/clock.c
+++ u-boot-4d3c95f/arch/arm/cpu/armv7/mx5/clock.c
@@ -36,7 +36,9 @@  enum pll_clocks {
 	PLL1_CLOCK = 0,
 	PLL2_CLOCK,
 	PLL3_CLOCK,
+#ifdef CONFIG_MX53
 	PLL4_CLOCK,
+#endif
 	PLL_CLOCKS,
 };
 
@@ -379,10 +381,10 @@  static u32 get_lp_apm(void)
 	u32 ret_val = 0;
 	u32 ccsr = __raw_readl(&mxc_ccm->ccsr);
 
-	if (((ccsr >> 9) & 1) == 0)
-		ret_val = CONFIG_SYS_MX5_HCLK;
+	if (ccsr & MXC_CCM_CCSR_LP_APM)
+		ret_val = 32768 * 1024;
 	else
-		ret_val = ((32768 * 1024));
+		ret_val = CONFIG_SYS_MX5_HCLK;
 
 	return ret_val;
 }
@@ -660,40 +662,50 @@  static int config_pll_clk(enum pll_clocks index, struct pll_param *pll_param)
 	switch (index) {
 	case PLL1_CLOCK:
 		/* Switch ARM to PLL2 clock */
-		__raw_writel(ccsr | 0x4, &mxc_ccm->ccsr);
+		__raw_writel(ccsr | MXC_CCM_CCSR_PLL1_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
 					pll_param->mfi, pll_param->mfn,
 					pll_param->mfd);
 		/* Switch back */
-		__raw_writel(ccsr & ~0x4, &mxc_ccm->ccsr);
+		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		break;
 	case PLL2_CLOCK:
 		/* Switch to pll2 bypass clock */
-		__raw_writel(ccsr | 0x2, &mxc_ccm->ccsr);
+		__raw_writel(ccsr | MXC_CCM_CCSR_PLL2_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
 					pll_param->mfi, pll_param->mfn,
 					pll_param->mfd);
 		/* Switch back */
-		__raw_writel(ccsr & ~0x2, &mxc_ccm->ccsr);
+		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		break;
 	case PLL3_CLOCK:
 		/* Switch to pll3 bypass clock */
-		__raw_writel(ccsr | 0x1, &mxc_ccm->ccsr);
+		__raw_writel(ccsr | MXC_CCM_CCSR_PLL3_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
 					pll_param->mfi, pll_param->mfn,
 					pll_param->mfd);
 		/* Switch back */
-		__raw_writel(ccsr & ~0x1, &mxc_ccm->ccsr);
+		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL3_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		break;
+#ifdef CONFIG_MX53
 	case PLL4_CLOCK:
 		/* Switch to pll4 bypass clock */
-		__raw_writel(ccsr | 0x20, &mxc_ccm->ccsr);
+		__raw_writel(ccsr | MXC_CCM_CCSR_PLL4_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		CHANGE_PLL_SETTINGS(pll, pll_param->pd,
 					pll_param->mfi, pll_param->mfn,
 					pll_param->mfd);
 		/* Switch back */
-		__raw_writel(ccsr & ~0x20, &mxc_ccm->ccsr);
+		__raw_writel(ccsr & ~MXC_CCM_CCSR_PLL4_SW_CLK_SEL,
+				&mxc_ccm->ccsr);
 		break;
+#endif
 	default:
 		return -EINVAL;
 	}
diff --git u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx5/crm_regs.h u-boot-4d3c95f/arch/arm/include/asm/arch-mx5/crm_regs.h
index 4fd8dba..7c21351 100644
--- u-boot-4d3c95f.orig/arch/arm/include/asm/arch-mx5/crm_regs.h
+++ u-boot-4d3c95f/arch/arm/include/asm/arch-mx5/crm_regs.h
@@ -82,6 +82,23 @@  struct mxc_ccm_reg {
 	u32 cmeor;
 };
 
+/* Define the bits in register CCSR */
+#if defined(CONFIG_MX51)
+#define MXC_CCM_CCSR_LP_APM			(0x1 << 9)
+#elif defined(CONFIG_MX53)
+#define MXC_CCM_CCSR_LP_APM			(0x1 << 10)
+#define MXC_CCM_CCSR_PLL4_SW_CLK_SEL		(0x1 << 9)
+#endif
+#define MXC_CCM_CCSR_STEP_SEL_OFFSET		7
+#define MXC_CCM_CCSR_STEP_SEL_MASK		(0x3 << 7)
+#define MXC_CCM_CCSR_PLL2_DIV_PODF_OFFSET	5
+#define MXC_CCM_CCSR_PLL2_DIV_PODF_MASK		(0x3 << 5)
+#define MXC_CCM_CCSR_PLL3_DIV_PODF_OFFSET	3
+#define MXC_CCM_CCSR_PLL3_DIV_PODF_MASK		(0x3 << 3)
+#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL		(0x1 << 2)
+#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL		(0x1 << 1)
+#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL		0x1
+
 /* Define the bits in register CACRR */
 #define MXC_CCM_CACRR_ARM_PODF_OFFSET		0
 #define MXC_CCM_CACRR_ARM_PODF_MASK		0x7