| Message ID | 1343936616-29318-1-git-send-email-zonque@gmail.com |
|---|---|
| State | Superseded, archived |
| Delegated to: | David Miller |
| Headers | show |
On Thu, Aug 02, 2012 at 09:43:35PM +0200, Daniel Mack wrote: > Make the driver control the device clocks. Appearantly, the Davinci > platform probes this driver with the clock all powered up, but on OMAP, > this isn't the case. Hmm, this looks like it could do with improvement, especially as we're moving everything over to a common clk API. 1. This driver could do with clk_prepare()/clk_unprepare() calls. 2. This driver should not be making the assumption that NULL means it can avoid clk_* calls. It should instead be using if (!IS_ERR(clk)) Thanks. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi On Thu, 2 Aug 2012, Daniel Mack wrote: > Make the driver control the device clocks. Appearantly, the Davinci > platform probes this driver with the clock all powered up, but on OMAP, > this isn't the case. > > Signed-off-by: Daniel Mack <zonque@gmail.com> > --- > drivers/net/ethernet/ti/davinci_mdio.c | 16 ++++++++++++++-- > 1 file changed, 14 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c > index cd7ee20..b4b6015 100644 > --- a/drivers/net/ethernet/ti/davinci_mdio.c > +++ b/drivers/net/ethernet/ti/davinci_mdio.c > @@ -332,6 +332,8 @@ static int __devinit davinci_mdio_probe(struct platform_device *pdev) > goto bail_out; > } > > + clk_enable(data->clk); > + This doesn't look right. This clock should be enabled by the pm_runtime_get_sync() call just above this. It shouldn't be necessary to enable it again unless something isn't right with the integration data. Likewise the pm_runtime_put_sync() calls should be superfluous. What hwmod data/device tree file are you using with this? - Paul -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02.08.2012 22:20, Paul Walmsley wrote: > Hi > > On Thu, 2 Aug 2012, Daniel Mack wrote: > >> Make the driver control the device clocks. Appearantly, the Davinci >> platform probes this driver with the clock all powered up, but on OMAP, >> this isn't the case. >> >> Signed-off-by: Daniel Mack <zonque@gmail.com> > >> --- >> drivers/net/ethernet/ti/davinci_mdio.c | 16 ++++++++++++++-- >> 1 file changed, 14 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c >> index cd7ee20..b4b6015 100644 >> --- a/drivers/net/ethernet/ti/davinci_mdio.c >> +++ b/drivers/net/ethernet/ti/davinci_mdio.c >> @@ -332,6 +332,8 @@ static int __devinit davinci_mdio_probe(struct platform_device *pdev) >> goto bail_out; >> } >> >> + clk_enable(data->clk); >> + > > This doesn't look right. This clock should be enabled by the > pm_runtime_get_sync() call just above this. It shouldn't be necessary > to enable it again unless something isn't right with the integration > data. Likewise the pm_runtime_put_sync() calls should be superfluous. Aah, thanks for the heads-up. To explain, I first worked with a dirty hack to alias the clock, and I definitely needed these extra calls then. > What hwmod data/device tree file are you using with this? Later, I added the hwmod to move away from these hacks, and indeed, that lets the pm runtime code handle the clock enabling. With that in place, the patch we're talking about here is in fact unnecessary. The second one though (the one that adds DT bindings) should go in. I will send a separate one later that fixes the IS_ERR(data->clk) error that Russell spotted. But that's now unrelated. Thanks for the review, Daniel -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 8/3/2012 1:13 AM, Daniel Mack wrote: > Make the driver control the device clocks. Appearantly, the Davinci > platform probes this driver with the clock all powered up, but on OMAP, > this isn't the case. > > Signed-off-by: Daniel Mack <zonque@gmail.com> > --- > drivers/net/ethernet/ti/davinci_mdio.c | 16 ++++++++++++++-- > 1 file changed, 14 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c > index cd7ee20..b4b6015 100644 > --- a/drivers/net/ethernet/ti/davinci_mdio.c > +++ b/drivers/net/ethernet/ti/davinci_mdio.c > @@ -332,6 +332,8 @@ static int __devinit davinci_mdio_probe(struct platform_device *pdev) > goto bail_out; > } > > + clk_enable(data->clk); > + > dev_set_drvdata(dev, data); > data->dev = dev; > spin_lock_init(&data->lock); > @@ -379,8 +381,11 @@ bail_out: > if (data->bus) > mdiobus_free(data->bus); > > - if (data->clk) > + if (data->clk) { > + clk_disable(data->clk); > clk_put(data->clk); > + } > + > pm_runtime_put_sync(&pdev->dev); > pm_runtime_disable(&pdev->dev); > > @@ -397,8 +402,11 @@ static int __devexit davinci_mdio_remove(struct platform_device *pdev) > if (data->bus) > mdiobus_free(data->bus); > > - if (data->clk) > + if (data->clk) { > + clk_disable(data->clk); > clk_put(data->clk); > + } > + > pm_runtime_put_sync(&pdev->dev); > pm_runtime_disable(&pdev->dev); > > @@ -427,6 +435,8 @@ static int davinci_mdio_suspend(struct device *dev) > data->suspended = true; > spin_unlock(&data->lock); > > + clk_disable(data->clk); > + > return 0; > } > > @@ -435,6 +445,8 @@ static int davinci_mdio_resume(struct device *dev) > struct davinci_mdio_data *data = dev_get_drvdata(dev); > u32 ctrl; > > + clk_enable(data->clk); > + Danial, I would request you to wait for this, its not that simple and straight. And once you migrate to runtime PM you don't need clk_enable/disable, this should get handled under runtime PM api's. Also have you read my another email post - http://comments.gmane.org/gmane.linux.ports.arm.omap/80796 Certainly, with respect to CPSW & MDIO, this patch is not enough and requires further investigation. I have started looking at this and hopefully will have some solution soon... Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 03.08.2012 07:16, Vaibhav Hiremath wrote: > > > On 8/3/2012 1:13 AM, Daniel Mack wrote: >> Make the driver control the device clocks. Appearantly, the Davinci >> platform probes this driver with the clock all powered up, but on OMAP, >> this isn't the case. >> >> Signed-off-by: Daniel Mack <zonque@gmail.com> >> --- >> drivers/net/ethernet/ti/davinci_mdio.c | 16 ++++++++++++++-- >> 1 file changed, 14 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c >> index cd7ee20..b4b6015 100644 >> --- a/drivers/net/ethernet/ti/davinci_mdio.c >> +++ b/drivers/net/ethernet/ti/davinci_mdio.c >> @@ -332,6 +332,8 @@ static int __devinit davinci_mdio_probe(struct platform_device *pdev) >> goto bail_out; >> } >> >> + clk_enable(data->clk); >> + >> dev_set_drvdata(dev, data); >> data->dev = dev; >> spin_lock_init(&data->lock); >> @@ -379,8 +381,11 @@ bail_out: >> if (data->bus) >> mdiobus_free(data->bus); >> >> - if (data->clk) >> + if (data->clk) { >> + clk_disable(data->clk); >> clk_put(data->clk); >> + } >> + >> pm_runtime_put_sync(&pdev->dev); >> pm_runtime_disable(&pdev->dev); >> >> @@ -397,8 +402,11 @@ static int __devexit davinci_mdio_remove(struct platform_device *pdev) >> if (data->bus) >> mdiobus_free(data->bus); >> >> - if (data->clk) >> + if (data->clk) { >> + clk_disable(data->clk); >> clk_put(data->clk); >> + } >> + >> pm_runtime_put_sync(&pdev->dev); >> pm_runtime_disable(&pdev->dev); >> >> @@ -427,6 +435,8 @@ static int davinci_mdio_suspend(struct device *dev) >> data->suspended = true; >> spin_unlock(&data->lock); >> >> + clk_disable(data->clk); >> + >> return 0; >> } >> >> @@ -435,6 +445,8 @@ static int davinci_mdio_resume(struct device *dev) >> struct davinci_mdio_data *data = dev_get_drvdata(dev); >> u32 ctrl; >> >> + clk_enable(data->clk); >> + > > Danial, > > I would request you to wait for this, its not that simple and straight. > And once you migrate to runtime PM you don't need clk_enable/disable, > this should get handled under runtime PM api's. As I said, it can be dropped. > Also have you read my another email post - > > http://comments.gmane.org/gmane.linux.ports.arm.omap/80796 > > Certainly, with respect to CPSW & MDIO, this patch is not enough and > requires further investigation. I have started looking at this and > hopefully will have some solution soon... Ok, no problem. We certainly need the DT bindings for davinci_mdio. With that applied, and the hwmod added (in the patch I posted yesterday), I can at least mount the rootfs via NFS, which is all I currently need. Best regards, Daniel -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 03, 2012 at 10:52:40, Daniel Mack wrote: > On 03.08.2012 07:16, Vaibhav Hiremath wrote: > > > > > > On 8/3/2012 1:13 AM, Daniel Mack wrote: > >> Make the driver control the device clocks. Appearantly, the Davinci > >> platform probes this driver with the clock all powered up, but on OMAP, > >> this isn't the case. > >> > >> Signed-off-by: Daniel Mack <zonque@gmail.com> > >> --- > >> drivers/net/ethernet/ti/davinci_mdio.c | 16 ++++++++++++++-- > >> 1 file changed, 14 insertions(+), 2 deletions(-) > >> > >> diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c > >> index cd7ee20..b4b6015 100644 > >> --- a/drivers/net/ethernet/ti/davinci_mdio.c > >> +++ b/drivers/net/ethernet/ti/davinci_mdio.c > >> @@ -332,6 +332,8 @@ static int __devinit davinci_mdio_probe(struct platform_device *pdev) > >> goto bail_out; > >> } > >> > >> + clk_enable(data->clk); > >> + > >> dev_set_drvdata(dev, data); > >> data->dev = dev; > >> spin_lock_init(&data->lock); > >> @@ -379,8 +381,11 @@ bail_out: > >> if (data->bus) > >> mdiobus_free(data->bus); > >> > >> - if (data->clk) > >> + if (data->clk) { > >> + clk_disable(data->clk); > >> clk_put(data->clk); > >> + } > >> + > >> pm_runtime_put_sync(&pdev->dev); > >> pm_runtime_disable(&pdev->dev); > >> > >> @@ -397,8 +402,11 @@ static int __devexit davinci_mdio_remove(struct platform_device *pdev) > >> if (data->bus) > >> mdiobus_free(data->bus); > >> > >> - if (data->clk) > >> + if (data->clk) { > >> + clk_disable(data->clk); > >> clk_put(data->clk); > >> + } > >> + > >> pm_runtime_put_sync(&pdev->dev); > >> pm_runtime_disable(&pdev->dev); > >> > >> @@ -427,6 +435,8 @@ static int davinci_mdio_suspend(struct device *dev) > >> data->suspended = true; > >> spin_unlock(&data->lock); > >> > >> + clk_disable(data->clk); > >> + > >> return 0; > >> } > >> > >> @@ -435,6 +445,8 @@ static int davinci_mdio_resume(struct device *dev) > >> struct davinci_mdio_data *data = dev_get_drvdata(dev); > >> u32 ctrl; > >> > >> + clk_enable(data->clk); > >> + > > > > Danial, > > > > I would request you to wait for this, its not that simple and straight. > > And once you migrate to runtime PM you don't need clk_enable/disable, > > this should get handled under runtime PM api's. > > As I said, it can be dropped. > > > Also have you read my another email post - > > > > http://comments.gmane.org/gmane.linux.ports.arm.omap/80796 > > > > Certainly, with respect to CPSW & MDIO, this patch is not enough and > > requires further investigation. I have started looking at this and > > hopefully will have some solution soon... > > Ok, no problem. We certainly need the DT bindings for davinci_mdio. With > that applied, and the hwmod added (in the patch I posted yesterday), I > can at least mount the rootfs via NFS, which is all I currently need. > > I certainly understand your requirement here. Actually this is not the only device we have, the same issue is applicable to PWM subsystem available in AM335x. Hopefully I should have something soon on this. Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index cd7ee20..b4b6015 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -332,6 +332,8 @@ static int __devinit davinci_mdio_probe(struct platform_device *pdev) goto bail_out; } + clk_enable(data->clk); + dev_set_drvdata(dev, data); data->dev = dev; spin_lock_init(&data->lock); @@ -379,8 +381,11 @@ bail_out: if (data->bus) mdiobus_free(data->bus); - if (data->clk) + if (data->clk) { + clk_disable(data->clk); clk_put(data->clk); + } + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -397,8 +402,11 @@ static int __devexit davinci_mdio_remove(struct platform_device *pdev) if (data->bus) mdiobus_free(data->bus); - if (data->clk) + if (data->clk) { + clk_disable(data->clk); clk_put(data->clk); + } + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -427,6 +435,8 @@ static int davinci_mdio_suspend(struct device *dev) data->suspended = true; spin_unlock(&data->lock); + clk_disable(data->clk); + return 0; } @@ -435,6 +445,8 @@ static int davinci_mdio_resume(struct device *dev) struct davinci_mdio_data *data = dev_get_drvdata(dev); u32 ctrl; + clk_enable(data->clk); + spin_lock(&data->lock); pm_runtime_put_sync(data->dev);
Make the driver control the device clocks. Appearantly, the Davinci platform probes this driver with the clock all powered up, but on OMAP, this isn't the case. Signed-off-by: Daniel Mack <zonque@gmail.com> --- drivers/net/ethernet/ti/davinci_mdio.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)