diff mbox

[v5,4/6] block: Convert open calls to qemu_open

Message ID 1343048885-1701-5-git-send-email-coreyb@linux.vnet.ibm.com
State New
Headers show

Commit Message

Corey Bryant July 23, 2012, 1:08 p.m. UTC
This patch converts all block layer open calls to qemu_open.

Note that this adds the O_CLOEXEC flag to the changed open paths
when the O_CLOEXEC macro is defined.

Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
---
v2:
 -Convert calls to qemu_open instead of file_open (kwolf@redhat.com)
 -Mention introduction of O_CLOEXEC (kwolf@redhat.com)

v3-v5:
 -No changes
---
 block/raw-posix.c |   18 +++++++++---------
 block/raw-win32.c |    4 ++--
 block/vdi.c       |    5 +++--
 block/vmdk.c      |   21 +++++++++------------
 block/vpc.c       |    2 +-
 block/vvfat.c     |    4 ++--
 6 files changed, 26 insertions(+), 28 deletions(-)

Comments

Eric Blake July 25, 2012, 7:22 p.m. UTC | #1
On 07/23/2012 07:08 AM, Corey Bryant wrote:
> This patch converts all block layer open calls to qemu_open.
> 
> Note that this adds the O_CLOEXEC flag to the changed open paths
> when the O_CLOEXEC macro is defined.

Is it actually adding O_CLOEXEC, or just the ability to use O_CLOEXEC?

Or is the actual change that the end result is that the fd now has
FD_CLOEXEC set unconditionally, whether by O_CLOEXEC (which the caller
need not pass) or by fcntl()?

> +++ b/block/raw-posix.c
> @@ -572,8 +572,8 @@ static int raw_create(const char *filename, QEMUOptionParameter *options)
>          options++;
>      }
>  
> -    fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
> -              0644);
> +    fd = qemu_open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
> +                   0644);

After all, I don't see O_CLOEXEC used here.

>      if (fd < 0) {
>          result = -errno;
>      } else {
> @@ -846,7 +846,7 @@ static int hdev_open(BlockDriverState *bs, const char *filename, int flags)
>          if ( bsdPath[ 0 ] != '\0' ) {
>              strcat(bsdPath,"s0");
>              /* some CDs don't have a partition 0 */
> -            fd = open(bsdPath, O_RDONLY | O_BINARY | O_LARGEFILE);
> +            fd = qemu_open(bsdPath, O_RDONLY | O_BINARY | O_LARGEFILE);

Also, I still stand by my earlier claim that we don't need O_LARGEFILE
here (we should already be configuring for 64-bit off_t by default),
although cleaning that up is probably worth an independent commit.


> +++ b/block/vdi.c
> @@ -653,8 +653,9 @@ static int vdi_create(const char *filename, QEMUOptionParameter *options)
>          options++;
>      }
>  
> -    fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE,
> -              0644);
> +    fd = qemu_open(filename,
> +                   O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE,
> +                   0644);

Another pointless O_LARGEFILE, and so forth.
Corey Bryant July 26, 2012, 3:11 a.m. UTC | #2
On 07/25/2012 03:22 PM, Eric Blake wrote:
> On 07/23/2012 07:08 AM, Corey Bryant wrote:
>> This patch converts all block layer open calls to qemu_open.
>>
>> Note that this adds the O_CLOEXEC flag to the changed open paths
>> when the O_CLOEXEC macro is defined.
>
> Is it actually adding O_CLOEXEC, or just the ability to use O_CLOEXEC?

It is adding O_CLOEXEC in qemu_open() on the open() call (as long as it 
is defined).

>
> Or is the actual change that the end result is that the fd now has
> FD_CLOEXEC set unconditionally, whether by O_CLOEXEC (which the caller
> need not pass) or by fcntl()?
>

The statement in the commit message isn't referring to anything dealing 
with qemu_dup(). The statement is specifically talking about the open() 
call in qemu_open(), and the point is to alert folks that old open() 
calls are now being routed through qemu_open() and likely are using the 
O_CLOEXEC flag, which is new behavior.

>> +++ b/block/raw-posix.c
>> @@ -572,8 +572,8 @@ static int raw_create(const char *filename, QEMUOptionParameter *options)
>>           options++;
>>       }
>>
>> -    fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
>> -              0644);
>> +    fd = qemu_open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
>> +                   0644);
>
> After all, I don't see O_CLOEXEC used here.
>

That's right.  qemu_open() adds O_CLOEXEC on the open() call.

>>       if (fd < 0) {
>>           result = -errno;
>>       } else {
>> @@ -846,7 +846,7 @@ static int hdev_open(BlockDriverState *bs, const char *filename, int flags)
>>           if ( bsdPath[ 0 ] != '\0' ) {
>>               strcat(bsdPath,"s0");
>>               /* some CDs don't have a partition 0 */
>> -            fd = open(bsdPath, O_RDONLY | O_BINARY | O_LARGEFILE);
>> +            fd = qemu_open(bsdPath, O_RDONLY | O_BINARY | O_LARGEFILE);
>
> Also, I still stand by my earlier claim that we don't need O_LARGEFILE
> here (we should already be configuring for 64-bit off_t by default),
> although cleaning that up is probably worth an independent commit.
>

I have a note to get rid of O_LARGEFILE as a separate follow-on patch.

>
>> +++ b/block/vdi.c
>> @@ -653,8 +653,9 @@ static int vdi_create(const char *filename, QEMUOptionParameter *options)
>>           options++;
>>       }
>>
>> -    fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE,
>> -              0644);
>> +    fd = qemu_open(filename,
>> +                   O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE,
>> +                   0644);
>
> Another pointless O_LARGEFILE, and so forth.
>

Yep.
diff mbox

Patch

diff --git a/block/raw-posix.c b/block/raw-posix.c
index 0dce089..7408a42 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -572,8 +572,8 @@  static int raw_create(const char *filename, QEMUOptionParameter *options)
         options++;
     }
 
-    fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
-              0644);
+    fd = qemu_open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
+                   0644);
     if (fd < 0) {
         result = -errno;
     } else {
@@ -846,7 +846,7 @@  static int hdev_open(BlockDriverState *bs, const char *filename, int flags)
         if ( bsdPath[ 0 ] != '\0' ) {
             strcat(bsdPath,"s0");
             /* some CDs don't have a partition 0 */
-            fd = open(bsdPath, O_RDONLY | O_BINARY | O_LARGEFILE);
+            fd = qemu_open(bsdPath, O_RDONLY | O_BINARY | O_LARGEFILE);
             if (fd < 0) {
                 bsdPath[strlen(bsdPath)-1] = '1';
             } else {
@@ -903,7 +903,7 @@  static int fd_open(BlockDriverState *bs)
 #endif
             return -EIO;
         }
-        s->fd = open(bs->filename, s->open_flags & ~O_NONBLOCK);
+        s->fd = qemu_open(bs->filename, s->open_flags & ~O_NONBLOCK);
         if (s->fd < 0) {
             s->fd_error_time = get_clock();
             s->fd_got_error = 1;
@@ -977,7 +977,7 @@  static int hdev_create(const char *filename, QEMUOptionParameter *options)
         options++;
     }
 
-    fd = open(filename, O_WRONLY | O_BINARY);
+    fd = qemu_open(filename, O_WRONLY | O_BINARY);
     if (fd < 0)
         return -errno;
 
@@ -1055,7 +1055,7 @@  static int floppy_probe_device(const char *filename)
     if (strstart(filename, "/dev/fd", NULL))
         prio = 50;
 
-    fd = open(filename, O_RDONLY | O_NONBLOCK);
+    fd = qemu_open(filename, O_RDONLY | O_NONBLOCK);
     if (fd < 0) {
         goto out;
     }
@@ -1108,7 +1108,7 @@  static void floppy_eject(BlockDriverState *bs, bool eject_flag)
         close(s->fd);
         s->fd = -1;
     }
-    fd = open(bs->filename, s->open_flags | O_NONBLOCK);
+    fd = qemu_open(bs->filename, s->open_flags | O_NONBLOCK);
     if (fd >= 0) {
         if (ioctl(fd, FDEJECT, 0) < 0)
             perror("FDEJECT");
@@ -1158,7 +1158,7 @@  static int cdrom_probe_device(const char *filename)
     int prio = 0;
     struct stat st;
 
-    fd = open(filename, O_RDONLY | O_NONBLOCK);
+    fd = qemu_open(filename, O_RDONLY | O_NONBLOCK);
     if (fd < 0) {
         goto out;
     }
@@ -1282,7 +1282,7 @@  static int cdrom_reopen(BlockDriverState *bs)
      */
     if (s->fd >= 0)
         close(s->fd);
-    fd = open(bs->filename, s->open_flags, 0644);
+    fd = qemu_open(bs->filename, s->open_flags, 0644);
     if (fd < 0) {
         s->fd = -1;
         return -EIO;
diff --git a/block/raw-win32.c b/block/raw-win32.c
index e4b0b75..8d7838d 100644
--- a/block/raw-win32.c
+++ b/block/raw-win32.c
@@ -255,8 +255,8 @@  static int raw_create(const char *filename, QEMUOptionParameter *options)
         options++;
     }
 
-    fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
-              0644);
+    fd = qemu_open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
+                   0644);
     if (fd < 0)
         return -EIO;
     set_sparse(fd);
diff --git a/block/vdi.c b/block/vdi.c
index 57325d6..c4f1529 100644
--- a/block/vdi.c
+++ b/block/vdi.c
@@ -653,8 +653,9 @@  static int vdi_create(const char *filename, QEMUOptionParameter *options)
         options++;
     }
 
-    fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE,
-              0644);
+    fd = qemu_open(filename,
+                   O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE,
+                   0644);
     if (fd < 0) {
         return -errno;
     }
diff --git a/block/vmdk.c b/block/vmdk.c
index 18e9b4c..557dc1b 100644
--- a/block/vmdk.c
+++ b/block/vmdk.c
@@ -1161,10 +1161,9 @@  static int vmdk_create_extent(const char *filename, int64_t filesize,
     VMDK4Header header;
     uint32_t tmp, magic, grains, gd_size, gt_size, gt_count;
 
-    fd = open(
-        filename,
-        O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE,
-        0644);
+    fd = qemu_open(filename,
+                   O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE,
+                   0644);
     if (fd < 0) {
         return -errno;
     }
@@ -1484,15 +1483,13 @@  static int vmdk_create(const char *filename, QEMUOptionParameter *options)
             (flags & BLOCK_FLAG_COMPAT6 ? 6 : 4),
             total_size / (int64_t)(63 * 16 * 512));
     if (split || flat) {
-        fd = open(
-                filename,
-                O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE,
-                0644);
+        fd = qemu_open(filename,
+                       O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE,
+                       0644);
     } else {
-        fd = open(
-                filename,
-                O_WRONLY | O_BINARY | O_LARGEFILE,
-                0644);
+        fd = qemu_open(filename,
+                       O_WRONLY | O_BINARY | O_LARGEFILE,
+                       0644);
     }
     if (fd < 0) {
         return -errno;
diff --git a/block/vpc.c b/block/vpc.c
index 5cd13d1..60ebf5a 100644
--- a/block/vpc.c
+++ b/block/vpc.c
@@ -678,7 +678,7 @@  static int vpc_create(const char *filename, QEMUOptionParameter *options)
     }
 
     /* Create the file */
-    fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, 0644);
+    fd = qemu_open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, 0644);
     if (fd < 0) {
         return -EIO;
     }
diff --git a/block/vvfat.c b/block/vvfat.c
index 7b1dcee..22b586a 100644
--- a/block/vvfat.c
+++ b/block/vvfat.c
@@ -1162,7 +1162,7 @@  static int open_file(BDRVVVFATState* s,mapping_t* mapping)
     if(!s->current_mapping ||
 	    strcmp(s->current_mapping->path,mapping->path)) {
 	/* open file */
-	int fd = open(mapping->path, O_RDONLY | O_BINARY | O_LARGEFILE);
+	int fd = qemu_open(mapping->path, O_RDONLY | O_BINARY | O_LARGEFILE);
 	if(fd<0)
 	    return -1;
 	vvfat_close_current_file(s);
@@ -2221,7 +2221,7 @@  static int commit_one_file(BDRVVVFATState* s,
     for (i = s->cluster_size; i < offset; i += s->cluster_size)
 	c = modified_fat_get(s, c);
 
-    fd = open(mapping->path, O_RDWR | O_CREAT | O_BINARY, 0666);
+    fd = qemu_open(mapping->path, O_RDWR | O_CREAT | O_BINARY, 0666);
     if (fd < 0) {
 	fprintf(stderr, "Could not open %s... (%s, %d)\n", mapping->path,
 		strerror(errno), errno);