diff mbox

[2/2] lsi53c895a boot support

Message ID 1342714503-6673-3-git-send-email-kraxel@redhat.com
State New
Headers show

Commit Message

Gerd Hoffmann July 19, 2012, 4:15 p.m. UTC 
This patch adds support for the lsi53c895a scsi host adapter,
allowing seabios to boot from scsi disks and cdroms connected
to the lsi scsi hba emulated by qemu.

This driver was written by looking at the expectations of qemu's
lsi emulation.  I have no idea idea how close this is to work on
real hardware, and I somehow doubt anyone cares given the age of
physical lsi scsi cards.  It depends on !COREBOOT for that reason.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 Makefile       |    2 +-
 src/Kconfig    |    6 ++
 src/block.c    |    3 +-
 src/blockcmd.c |    5 +-
 src/disk.h     |    1 +
 src/lsi-scsi.c |  213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 src/lsi-scsi.h |    2 +
 src/post.c     |    2 +
 8 files changed, 231 insertions(+), 3 deletions(-)
 create mode 100644 src/lsi-scsi.c
 create mode 100644 src/lsi-scsi.h

Comments

Kevin O'Connor July 20, 2012, 12:55 a.m. UTC | #1 
On Thu, Jul 19, 2012 at 06:15:03PM +0200, Gerd Hoffmann wrote:
> This patch adds support for the lsi53c895a scsi host adapter,
> allowing seabios to boot from scsi disks and cdroms connected
> to the lsi scsi hba emulated by qemu.
> 
> This driver was written by looking at the expectations of qemu's
> lsi emulation.  I have no idea idea how close this is to work on
> real hardware, and I somehow doubt anyone cares given the age of
> physical lsi scsi cards.  It depends on !COREBOOT for that reason.

Thanks.  Looks good to me.  I definitely agree on marking it as
!COREBOOT.  Some minor comments below.

[...]
> --- a/src/Kconfig
> +++ b/src/Kconfig
> @@ -119,6 +119,12 @@ menu "Hardware support"
>          default y
>          help
>              Support boot from virtio-scsi storage.
> +    config LSI_SCSI
> +        depends on DRIVES && !COREBOOT
> +        bool "lsi53c895a scsi controllers"
> +        default y
> +        help
> +            Support boot from lsi53c895a scsi storage.

It's probably worthwhile to point out in the help that this is for
QEMU emulation only.

[...]
> +static int
> +lsi_scsi_cmd(struct lsi_lun_s *llun, struct disk_op_s *op,
> +             void *cdbcmd, u16 target, u16 lun, u16 blocksize)
> +{
> +    u32 iobase = GET_GLOBAL(llun->iobase);
> +    u32 dma = ((cdb_is_read(cdbcmd, blocksize) ? 0x01000000 : 0x00000000) |
> +               (op->count * blocksize));
> +    u8 msgout[] = {
> +        0x80 | lun,                 // select lun
> +        0x08,
> +    };
> +    u8 status = 0xff;
> +    u8 msgin_tmp[2];
> +    u8 msgin = 0xff;
> +
> +    /* FIXME: probably not the best idea to have this on the stack ... */
> +    u32 script[] = {

Several places in the code DMA to the stack already (usb-ehci,
usb-uhci, ata).

[...]
> --- /dev/null
> +++ b/src/lsi-scsi.h
> @@ -0,0 +1,2 @@
> +void lsi_scsi_setup(void);
> +int lsi_scsi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize);

Should have a header guard.

-Kevin
Gerd Hoffmann July 20, 2012, 7:33 a.m. UTC | #2 
Hi,

>> +    /* FIXME: probably not the best idea to have this on the stack ... */
>> +    u32 script[] = {
> 
> Several places in the code DMA to the stack already (usb-ehci,
> usb-uhci, ata).

My concern isn't DMA'ing to the stack, but the size of the script and
possible stack overruns.  But maybe it is a moot point with the stack
switching added to seabios recently.

cheers,
  Gerd
Kevin O'Connor July 20, 2012, 12:47 p.m. UTC | #3 
On Fri, Jul 20, 2012 at 09:33:05AM +0200, Gerd Hoffmann wrote:
>   Hi,
> 
> >> +    /* FIXME: probably not the best idea to have this on the stack ... */
> >> +    u32 script[] = {
> > 
> > Several places in the code DMA to the stack already (usb-ehci,
> > usb-uhci, ata).
> 
> My concern isn't DMA'ing to the stack, but the size of the script and
> possible stack overruns.  But maybe it is a moot point with the stack
> switching added to seabios recently.

Disk access code will have at least a 4K stack in 32bit mode and a 2K
stack in 16bit mode.

-Kevin
Gerd Hoffmann July 20, 2012, 1:39 p.m. UTC | #4 
On 07/20/12 14:47, Kevin O'Connor wrote:
> On Fri, Jul 20, 2012 at 09:33:05AM +0200, Gerd Hoffmann wrote:
>> My concern isn't DMA'ing to the stack, but the size of the script and
>> possible stack overruns.  But maybe it is a moot point with the stack
>> switching added to seabios recently.
> 
> Disk access code will have at least a 4K stack in 32bit mode and a 2K
> stack in 16bit mode.

Ok, then, that should be enougth.

thanks,
  Gerd
diff mbox

Patch

diff --git a/Makefile b/Makefile
index 8fa5c91..dfdec5c 100644
--- a/Makefile
+++ b/Makefile
@@ -13,7 +13,7 @@  SRCBOTH=misc.c stacks.c pmm.c output.c util.c block.c floppy.c ata.c mouse.c \
     pnpbios.c pirtable.c vgahooks.c ramdisk.c pcibios.c blockcmd.c \
     usb.c usb-uhci.c usb-ohci.c usb-ehci.c usb-hid.c usb-msc.c \
     virtio-ring.c virtio-pci.c virtio-blk.c virtio-scsi.c apm.c ahci.c \
-    usb-uas.c
+    usb-uas.c lsi-scsi.c
 SRC16=$(SRCBOTH) system.c disk.c font.c
 SRC32FLAT=$(SRCBOTH) post.c shadow.c memmap.c coreboot.c boot.c \
     acpi.c smm.c mptable.c smbios.c pciinit.c optionroms.c mtrr.c \
diff --git a/src/Kconfig b/src/Kconfig
index a798d9f..3f18e0f 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -119,6 +119,12 @@  menu "Hardware support"
         default y
         help
             Support boot from virtio-scsi storage.
+    config LSI_SCSI
+        depends on DRIVES && !COREBOOT
+        bool "lsi53c895a scsi controllers"
+        default y
+        help
+            Support boot from lsi53c895a scsi storage.
     config FLOPPY
         depends on DRIVES
         bool "Floppy controller"
diff --git a/src/block.c b/src/block.c
index 50d7bb4..2de9c5d 100644
--- a/src/block.c
+++ b/src/block.c
@@ -280,7 +280,7 @@  map_floppy_drive(struct drive_s *drive_g)
 static int
 process_scsi_op(struct disk_op_s *op)
 {
-    if (!CONFIG_VIRTIO_SCSI && !CONFIG_USB_MSC && !CONFIG_USB_UAS)
+    if (!CONFIG_VIRTIO_SCSI && !CONFIG_USB_MSC && !CONFIG_USB_UAS && !CONFIG_LSI_SCSI)
         return 0;
     switch (op->command) {
     case CMD_READ:
@@ -323,6 +323,7 @@  process_op(struct disk_op_s *op)
     case DTYPE_USB:
     case DTYPE_UAS:
     case DTYPE_VIRTIO_SCSI:
+    case DTYPE_LSI_SCSI:
         return process_scsi_op(op);
     default:
         op->count = 0;
diff --git a/src/blockcmd.c b/src/blockcmd.c
index 2998a7c..0d0acfd 100644
--- a/src/blockcmd.c
+++ b/src/blockcmd.c
@@ -14,6 +14,7 @@ 
 #include "usb-msc.h" // usb_cmd_data
 #include "usb-uas.h" // usb_cmd_data
 #include "virtio-scsi.h" // virtio_scsi_cmd_data
+#include "lsi-scsi.h" // lsi_scsi_cmd_data
 #include "boot.h" // boot_add_hd
 
 // Route command to low-level handler.
@@ -32,6 +33,8 @@  cdb_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize)
         return ahci_cmd_data(op, cdbcmd, blocksize);
     case DTYPE_VIRTIO_SCSI:
         return virtio_scsi_cmd_data(op, cdbcmd, blocksize);
+    case DTYPE_LSI_SCSI:
+        return lsi_scsi_cmd_data(op, cdbcmd, blocksize);
     default:
         op->count = 0;
         return DISK_RET_EPARAM;
@@ -93,7 +96,7 @@  scsi_is_ready(struct disk_op_s *op)
 int
 scsi_init_drive(struct drive_s *drive, const char *s, int prio)
 {
-    if (!CONFIG_USB_UAS && !CONFIG_USB_MSC && !CONFIG_VIRTIO_SCSI)
+    if (!CONFIG_USB_UAS && !CONFIG_USB_MSC && !CONFIG_VIRTIO_SCSI && !CONFIG_LSI_SCSI)
         return 0;
 
     struct disk_op_s dop;
diff --git a/src/disk.h b/src/disk.h
index 787b5b4..6810cd7 100644
--- a/src/disk.h
+++ b/src/disk.h
@@ -232,6 +232,7 @@  struct drive_s {
 #define DTYPE_VIRTIO_BLK   0x08
 #define DTYPE_USB          0x09
 #define DTYPE_UAS          0x0a
+#define DTYPE_LSI_SCSI     0x0b
 
 #define MAXDESCSIZE 80
 
diff --git a/src/lsi-scsi.c b/src/lsi-scsi.c
new file mode 100644
index 0000000..37acd28
--- /dev/null
+++ b/src/lsi-scsi.c
@@ -0,0 +1,213 @@ 
+// (qemu-emulated) lsi53c895a boot support.
+//
+// Copyright (C) 2012 Red Hat Inc.
+//
+// Authors:
+//  Gerd Hoffmann <kraxel@redhat.com>
+//
+// based on virtio-scsi.c which is written by:
+//  Paolo Bonzini <pbonzini@redhat.com>
+//
+// This file may be distributed under the terms of the GNU LGPLv3 license.
+
+#include "util.h" // dprintf
+#include "pci.h" // foreachpci
+#include "config.h" // CONFIG_*
+#include "biosvar.h" // GET_GLOBAL
+#include "pci_ids.h" // PCI_DEVICE_ID_VIRTIO_BLK
+#include "pci_regs.h" // PCI_VENDOR_ID
+#include "boot.h" // bootprio_find_scsi_device
+#include "blockcmd.h" // scsi_init_drive
+#include "disk.h"
+
+#define LSI_REG_DSTAT     0x0c
+#define LSI_REG_ISTAT0    0x14
+#define LSI_REG_DSP0      0x2c
+#define LSI_REG_DSP1      0x2d
+#define LSI_REG_DSP2      0x2e
+#define LSI_REG_DSP3      0x2f
+#define LSI_REG_SIST0     0x42
+#define LSI_REG_SIST1     0x43
+
+#define LSI_ISTAT0_DIP    0x01
+#define LSI_ISTAT0_SIP    0x02
+#define LSI_ISTAT0_INTF   0x04
+#define LSI_ISTAT0_CON    0x08
+#define LSI_ISTAT0_SEM    0x10
+#define LSI_ISTAT0_SIGP   0x20
+#define LSI_ISTAT0_SRST   0x40
+#define LSI_ISTAT0_ABRT   0x80
+
+struct lsi_lun_s {
+    struct drive_s drive;
+    struct pci_device *pci;
+    u32 iobase;
+    u8 target;
+    u8 lun;
+};
+
+static int
+lsi_scsi_cmd(struct lsi_lun_s *llun, struct disk_op_s *op,
+             void *cdbcmd, u16 target, u16 lun, u16 blocksize)
+{
+    u32 iobase = GET_GLOBAL(llun->iobase);
+    u32 dma = ((cdb_is_read(cdbcmd, blocksize) ? 0x01000000 : 0x00000000) |
+               (op->count * blocksize));
+    u8 msgout[] = {
+        0x80 | lun,                 // select lun
+        0x08,
+    };
+    u8 status = 0xff;
+    u8 msgin_tmp[2];
+    u8 msgin = 0xff;
+
+    /* FIXME: probably not the best idea to have this on the stack ... */
+    u32 script[] = {
+        /* select target, send scsi command */
+        0x40000000 | target << 16,  // select target
+        0x00000000,
+        0x06000001,                 // msgout
+        (u32)MAKE_FLATPTR(GET_SEG(SS), &msgout),
+        0x02000010,                 // scsi command
+        (u32)MAKE_FLATPTR(GET_SEG(SS), cdbcmd),
+
+        /* handle disconnect */
+        0x87820000,                 // phase == msgin ?
+        0x00000018,
+        0x07000002,                 // msgin
+        (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin_tmp),
+        0x50000000,                 // re-select
+        0x00000000,
+        0x07000002,                 // msgin
+        (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin_tmp),
+
+        /* dma data, get status, raise irq */
+        dma,                        // dma data
+        (u32)op->buf_fl,
+        0x03000001,                 // status
+        (u32)MAKE_FLATPTR(GET_SEG(SS), &status),
+        0x07000001,                 // msgin
+        (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin),
+        0x98080000,                 // dma irq
+        0x00000000,
+    };
+    u32 dsp = (u32)MAKE_FLATPTR(GET_SEG(SS), &script);
+
+    outb(dsp         & 0xff, iobase + LSI_REG_DSP0);
+    outb((dsp >>  8) & 0xff, iobase + LSI_REG_DSP1);
+    outb((dsp >> 16) & 0xff, iobase + LSI_REG_DSP2);
+    outb((dsp >> 24) & 0xff, iobase + LSI_REG_DSP3);
+
+    for (;;) {
+        u8 dstat = inb(iobase + LSI_REG_DSTAT);
+        u8 sist0 = inb(iobase + LSI_REG_SIST0);
+        u8 sist1 = inb(iobase + LSI_REG_SIST1);
+        if (sist0 || sist1) {
+            goto fail;
+        }
+        if (dstat & 0x04) {
+            break;
+        }
+        usleep(5);
+    }
+
+    if (msgin == 0 && status == 0) {
+        return DISK_RET_SUCCESS;
+    }
+
+fail:
+    // sledge hammer to get back into a known-good state: hba reset
+    outb(LSI_ISTAT0_SRST, iobase + LSI_REG_ISTAT0);
+    return DISK_RET_EBADTRACK;
+}
+
+int
+lsi_scsi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize)
+{
+    if (!CONFIG_LSI_SCSI)
+        return DISK_RET_EBADTRACK;
+
+    struct lsi_lun_s *llun =
+        container_of(op->drive_g, struct lsi_lun_s, drive);
+
+    return lsi_scsi_cmd(llun, op, cdbcmd,
+                        GET_GLOBAL(llun->target), GET_GLOBAL(llun->lun),
+                        blocksize);
+}
+
+static int
+lsi_scsi_add_lun(struct pci_device *pci, u32 iobase, u8 target, u8 lun)
+{
+    struct lsi_lun_s *llun = malloc_fseg(sizeof(*llun));
+    if (!llun) {
+        warn_noalloc();
+        return -1;
+    }
+    memset(llun, 0, sizeof(*llun));
+    llun->drive.type = DTYPE_LSI_SCSI;
+    llun->drive.cntl_id = pci->bdf;
+    llun->pci = pci;
+    llun->target = target;
+    llun->lun = lun;
+    llun->iobase = iobase;
+
+    char *name = znprintf(16, "lsi %02x:%02x.%x %d:%d",
+                          pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf),
+                          pci_bdf_to_fn(pci->bdf), target, lun);
+    int prio = bootprio_find_scsi_device(pci, target, lun);
+    int ret = scsi_init_drive(&llun->drive, name, prio);
+    free(name);
+    if (ret)
+        goto fail;
+    return 0;
+
+fail:
+    free(llun);
+    return -1;
+}
+
+static void
+lsi_scsi_scan_target(struct pci_device *pci, u32 iobase, u8 target)
+{
+    /* TODO: send REPORT LUNS.  For now, only LUN 0 is recognized.  */
+    lsi_scsi_add_lun(pci, iobase, target, 0);
+}
+
+static void
+init_lsi_scsi(struct pci_device *pci)
+{
+    u16 bdf = pci->bdf;
+    u32 iobase = pci_config_readl(pci->bdf, PCI_BASE_ADDRESS_0)
+        & PCI_BASE_ADDRESS_IO_MASK;
+
+    dprintf(1, "found lsi53c895a at %02x:%02x.%x, io @ %x\n",
+            pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf),
+            pci_bdf_to_fn(bdf), iobase);
+
+    // reset
+    outb(LSI_ISTAT0_SRST, iobase + LSI_REG_ISTAT0);
+
+    int i;
+    for (i = 0; i < 7; i++)
+        lsi_scsi_scan_target(pci, iobase, i);
+
+    return;
+}
+
+void
+lsi_scsi_setup(void)
+{
+    ASSERT32FLAT();
+    if (!CONFIG_LSI_SCSI)
+        return;
+
+    dprintf(3, "init lsi53c895a\n");
+
+    struct pci_device *pci;
+    foreachpci(pci) {
+        if (pci->vendor != PCI_VENDOR_ID_LSI_LOGIC
+            || pci->device != PCI_DEVICE_ID_LSI_53C895A)
+            continue;
+        init_lsi_scsi(pci);
+    }
+}
diff --git a/src/lsi-scsi.h b/src/lsi-scsi.h
new file mode 100644
index 0000000..f593f99
--- /dev/null
+++ b/src/lsi-scsi.h
@@ -0,0 +1,2 @@ 
+void lsi_scsi_setup(void);
+int lsi_scsi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize);
diff --git a/src/post.c b/src/post.c
index 3101505..0f31b4c 100644
--- a/src/post.c
+++ b/src/post.c
@@ -27,6 +27,7 @@ 
 #include "ps2port.h" // ps2port_setup
 #include "virtio-blk.h" // virtio_blk_setup
 #include "virtio-scsi.h" // virtio_scsi_setup
+#include "lsi-scsi.h" // lsi_scsi_setup
 
 
 /****************************************************************
@@ -194,6 +195,7 @@  init_hw(void)
     ramdisk_setup();
     virtio_blk_setup();
     virtio_scsi_setup();
+    lsi_scsi_setup();
 }
 
 // Begin the boot process by invoking an int0x19 in 16bit mode.