Message ID | 1341654436-24826-1-git-send-email-bocui107@gmail.com |
---|---|
State | Accepted |
Commit | 448217d4b2e11b11ae5addd1d1f752ce194d6af0 |
Delegated to: | Albert ARIBAUD |
Headers | show |
Hi Zhong Hongbo, On Sat, 7 Jul 2012 17:47:16 +0800, Zhong Hongbo <bocui107@gmail.com> wrote: > From: Zhong Hongbo <bocui107@gmail.com> > > In currently, when __bss_start is equal to __bss_end__, > The bss loop will clear all the things in memory space. > > But just only when __bss_end__ greater than __bss_start__, > we do the clear bss section operation. > > Signed-off-by: Zhong Hongbo <bocui107@gmail.com> > --- > Change for V2 > - Fixed bss clear operation, no just skip it. > - Adjust the commit information > Change for V3 > - Modify all the bss clean operation for arm platform > - Adjust the title > --- Almost there... The PATCH part is missing, i.e. you should not tag "[V3]" but "[PATCH V3]". Just to make sure patchwork gets it right, please repost a V4 of this properly tagged with "[PATCH V4]". Amicalement,
On 07/07/2012 05:58 PM, Albert ARIBAUD wrote: > Hi Zhong Hongbo, > > On Sat, 7 Jul 2012 17:47:16 +0800, Zhong Hongbo <bocui107@gmail.com> wrote: >> From: Zhong Hongbo <bocui107@gmail.com> >> >> In currently, when __bss_start is equal to __bss_end__, >> The bss loop will clear all the things in memory space. >> >> But just only when __bss_end__ greater than __bss_start__, >> we do the clear bss section operation. >> >> Signed-off-by: Zhong Hongbo <bocui107@gmail.com> >> --- >> Change for V2 >> - Fixed bss clear operation, no just skip it. >> - Adjust the commit information >> Change for V3 >> - Modify all the bss clean operation for arm platform >> - Adjust the title >> --- > > Almost there... The PATCH part is missing, i.e. you should not tag "[V3]" > but "[PATCH V3]". Ok, > > Just to make sure patchwork gets it right, please repost a V4 of this > properly tagged with "[PATCH V4]". Ok, Thanks, hongbo > > Amicalement, >
Dear Zhong Hongbo, On 07.07.2012 15:19, Zhong Hongbo wrote: > On 07/07/2012 05:58 PM, Albert ARIBAUD wrote: >> Hi Zhong Hongbo, >> >> On Sat, 7 Jul 2012 17:47:16 +0800, Zhong Hongbo <bocui107@gmail.com> wrote: >>> From: Zhong Hongbo <bocui107@gmail.com> >> Almost there... The PATCH part is missing, i.e. you should not tag "[V3]" >> but "[PATCH V3]". > > Ok, well, you sent v4 but didn't respect this comment. Please read http://www.denx.de/wiki/view/U-Boot/Patches#Sending_updated_patch_versions especially this part: ---8<--- Make an appropriate note that this is a re-submission in the subject line, eg. "[PATCH v2] Add support for feature X". git format-patch --subject-prefix="PATCH v2" can be used in this case. --->8--- Another option is to use 'git send-email --annotate ...' and change the subject line. >> Just to make sure patchwork gets it right, please repost a V4 of this >> properly tagged with "[PATCH V4]". I think patchwork got it right http://patchwork.ozlabs.org/patch/169595/ and http://patchwork.ozlabs.org/patch/169572/. So I would say you do not need to resend a v5 of the same patch cause of this formal 'fault'. Albert, do you have the same opinion? Albert, I think we should count this a fix and pull into this upcoming release. How do you think about? Best regards Andreas Bießmann
Hi Andreas, On Mon, 09 Jul 2012 13:21:12 +0200, "Andreas Bießmann" <andreas.devel@googlemail.com> wrote: > Dear Zhong Hongbo, > > On 07.07.2012 15:19, Zhong Hongbo wrote: > > On 07/07/2012 05:58 PM, Albert ARIBAUD wrote: > >> Hi Zhong Hongbo, > >> > >> On Sat, 7 Jul 2012 17:47:16 +0800, Zhong Hongbo > >> <bocui107@gmail.com> wrote: > >>> From: Zhong Hongbo <bocui107@gmail.com> > > >> Almost there... The PATCH part is missing, i.e. you should not tag > >> "[V3]" but "[PATCH V3]". > > > > Ok, > > well, you sent v4 but didn't respect this comment. Please read > http://www.denx.de/wiki/view/U-Boot/Patches#Sending_updated_patch_versions > especially this part: > > ---8<--- > Make an appropriate note that this is a re-submission in the subject > line, eg. "[PATCH v2] Add support for feature X". git format-patch > --subject-prefix="PATCH v2" can be used in this case. > --->8--- > > Another option is to use 'git send-email --annotate ...' and change > the subject line. > > >> Just to make sure patchwork gets it right, please repost a V4 of > >> this properly tagged with "[PATCH V4]". > > I think patchwork got it right > http://patchwork.ozlabs.org/patch/169595/ and > http://patchwork.ozlabs.org/patch/169572/. So I would say you do not > need to resend a v5 of the same patch cause of this formal 'fault'. > Albert, do you have the same opinion? (sigh) No, I don't have the same opinion. But I will accept... for this once. > Albert, I think we should count this a fix and pull into this upcoming > release. How do you think about? This was my intent from the start. :) > Best regards > > Andreas Bießmann Amicalement,
Dear Albert Aribaud, On 09.07.2012 16:20, Albert ARIBAUD wrote: > Hi Andreas, > > On Mon, 09 Jul 2012 13:21:12 +0200, "Andreas Bießmann" > <andreas.devel@googlemail.com> wrote: >> Dear Zhong Hongbo, >> >> On 07.07.2012 15:19, Zhong Hongbo wrote: >>> On 07/07/2012 05:58 PM, Albert ARIBAUD wrote: >>>> Hi Zhong Hongbo, >>>> >>>> On Sat, 7 Jul 2012 17:47:16 +0800, Zhong Hongbo >>>> <bocui107@gmail.com> wrote: >>>>> From: Zhong Hongbo <bocui107@gmail.com> >> >>>> Almost there... The PATCH part is missing, i.e. you should not tag >>>> "[V3]" but "[PATCH V3]". >>> >>> Ok, >> >> well, you sent v4 but didn't respect this comment. Please read >> http://www.denx.de/wiki/view/U-Boot/Patches#Sending_updated_patch_versions >> especially this part: >> >> ---8<--- >> Make an appropriate note that this is a re-submission in the subject >> line, eg. "[PATCH v2] Add support for feature X". git format-patch >> --subject-prefix="PATCH v2" can be used in this case. >> --->8--- >> >> Another option is to use 'git send-email --annotate ...' and change >> the subject line. >> >>>> Just to make sure patchwork gets it right, please repost a V4 of >>>> this properly tagged with "[PATCH V4]". >> >> I think patchwork got it right >> http://patchwork.ozlabs.org/patch/169595/ and >> http://patchwork.ozlabs.org/patch/169572/. So I would say you do not >> need to resend a v5 of the same patch cause of this formal 'fault'. >> Albert, do you have the same opinion? > > (sigh) No, I don't have the same opinion. Ouch, sorry for that. I will notice this and do not force your opinion. I should have asked before. Best regards Andreas Bießmann
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index c0db96c..2483c63 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -251,10 +251,12 @@ clear_bss: add r1, r1, r4 mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - bne clbss_l + b clbss_l +clbss_e: #endif /* #ifndef CONFIG_SPL_BUILD */ /* diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 848144a..d613641 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -351,11 +351,12 @@ clear_bss: add r1, r1, r4 mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - bne clbss_l - + b clbss_l +clbss_e: #ifndef CONFIG_NAND_SPL bl coloured_LED_init bl red_led_on diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 540e3c2..3b97e80 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -228,10 +228,12 @@ clear_bss: add r1, r1, r4 mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - bne clbss_l + b clbss_l +clbss_e: bl coloured_LED_init bl red_led_on diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 8c5612c..9b8604e 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -271,10 +271,12 @@ clear_bss: add r1, r1, r4 mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - bne clbss_l + b clbss_l +clbss_e: bl coloured_LED_init bl red_led_on diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index dbb93ef..1a54416 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -265,10 +265,12 @@ clear_bss: add r1, r1, r4 mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - bne clbss_l + b clbss_l +clbss_e: bl coloured_LED_init bl red_led_on diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 89ba558..b4d1d2d 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -236,10 +236,12 @@ clear_bss: add r1, r1, r4 mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - blo clbss_l + b clbss_l +clbss_e: #endif /* diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 2033b36..b85e7d4 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -232,10 +232,12 @@ clear_bss: add r1, r1, r4 mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - bne clbss_l + b clbss_l +clbss_e: bl coloured_LED_init bl red_led_on diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 22a3ced..aee27fd 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -259,10 +259,12 @@ clear_bss: #endif mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - bne clbss_l + b clbss_l +clbss_e: /* * We are done. Do not return, instead branch to second part of board diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index cb32121..59c359a 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -334,10 +334,12 @@ clear_bss: add r1, r1, r4 mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - bne clbss_l + b clbss_l +clbss_e: bl coloured_LED_init bl red_led_on diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S index 62de8b8..bd68cd4 100644 --- a/arch/arm/cpu/lh7a40x/start.S +++ b/arch/arm/cpu/lh7a40x/start.S @@ -245,10 +245,12 @@ clear_bss: add r1, r1, r4 mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - bne clbss_l + b clbss_l +clbss_e: #endif /* diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index ba0de8f..33c73f6 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -258,10 +258,12 @@ clear_bss: add r1, r1, r4 mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - bne clbss_l + b clbss_l +clbss_e: #endif /* #ifndef CONFIG_SPL_BUILD */ /* diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index a29d5b4..8daf26c 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -217,10 +217,12 @@ clear_bss: add r1, r1, r4 mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - bne clbss_l + b clbss_l +clbss_e: bl coloured_LED_init bl red_led_on diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 92546d8..bcea2a8 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -221,10 +221,12 @@ clear_bss: add r1, r1, r4 mov r2, #0x00000000 /* clear */ -clbss_l:str r2, [r0] /* clear loop... */ +clbss_l:cmp r0, r1 /* clear loop... */ + bhs clbss_e /* if reached end of bss, exit */ + str r2, [r0] add r0, r0, #4 - cmp r0, r1 - bne clbss_l + b clbss_l +clbss_e: #endif /*