diff mbox

[5/6] hw/arm_boot.c: Support DTBs which use 64 bit addresses

Message ID 1341507652-22155-6-git-send-email-peter.maydell@linaro.org
State New
Headers show

Commit Message

Peter Maydell July 5, 2012, 5 p.m. UTC 
Support the case where the device tree blob specifies that
#address-cells and #size-cells are greater than 1. (This
is needed for device trees which can handle 64 bit physical
addresses and thus total RAM sizes over 4GB.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm_boot.c |   36 +++++++++++++++++++++++++++++++++---
 1 files changed, 33 insertions(+), 3 deletions(-)

Comments

Blue Swirl July 5, 2012, 6:53 p.m. UTC | #1 
On Thu, Jul 5, 2012 at 5:00 PM, Peter Maydell <peter.maydell@linaro.org> wrote:
> Support the case where the device tree blob specifies that
> #address-cells and #size-cells are greater than 1. (This
> is needed for device trees which can handle 64 bit physical
> addresses and thus total RAM sizes over 4GB.)
>
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
>  hw/arm_boot.c |   36 +++++++++++++++++++++++++++++++++---
>  1 files changed, 33 insertions(+), 3 deletions(-)
>
> diff --git a/hw/arm_boot.c b/hw/arm_boot.c
> index 7366427..8203422 100644
> --- a/hw/arm_boot.c
> +++ b/hw/arm_boot.c
> @@ -216,11 +216,12 @@ static void set_kernel_args_old(const struct arm_boot_info *info)
>  static int load_dtb(target_phys_addr_t addr, const struct arm_boot_info *binfo)
>  {
>  #ifdef CONFIG_FDT
> -    uint32_t mem_reg_property[] = { cpu_to_be32(binfo->loader_start),
> -                                    cpu_to_be32(binfo->ram_size) };
> +    uint32_t *mem_reg_property;
> +    uint32_t mem_reg_propsize;
>      void *fdt = NULL;
>      char *filename;
>      int size, rc;
> +    uint32_t acells, scells, hival;
>
>      filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, binfo->dtb_filename);
>      if (!filename) {
> @@ -236,8 +237,37 @@ static int load_dtb(target_phys_addr_t addr, const struct arm_boot_info *binfo)
>      }
>      g_free(filename);
>
> +    acells = qemu_devtree_getprop_cell(fdt, "/", "#address-cells");
> +    scells = qemu_devtree_getprop_cell(fdt, "/", "#size-cells");
> +    printf("fdt: acells %d scells %d\n", acells, scells);

Leftover debugging?

> +    if (acells == 0 || scells == 0) {
> +        fprintf(stderr, "dtb file invalid (#address-cells or #size-cells 0)\n");
> +        return -1;
> +    }
> +
> +    mem_reg_propsize = acells + scells;
> +    mem_reg_property = g_new0(uint32_t, mem_reg_propsize);
> +    mem_reg_property[acells - 1] = cpu_to_be32(binfo->loader_start);
> +    hival = cpu_to_be32(binfo->loader_start >> 32);
> +    if (acells > 1) {
> +        mem_reg_property[acells - 2] = hival;
> +    } else if (hival != 0) {
> +        fprintf(stderr, "qemu: dtb file not compatible with "
> +                "RAM start address > 4GB\n");
> +        exit(1);
> +    }
> +    mem_reg_property[acells + scells - 1] = cpu_to_be32(binfo->ram_size);
> +    hival = cpu_to_be32(binfo->ram_size >> 32);
> +    if (scells > 1) {
> +        mem_reg_property[acells + scells - 2] = hival;
> +    } else if (hival != 0) {
> +        fprintf(stderr, "qemu: dtb file not compatible with "
> +                "RAM size > 4GB\n");
> +        exit(1);
> +    }
> +
>      rc = qemu_devtree_setprop(fdt, "/memory", "reg", mem_reg_property,
> -                               sizeof(mem_reg_property));
> +                              mem_reg_propsize * sizeof(uint32_t));
>      if (rc < 0) {
>          fprintf(stderr, "couldn't set /memory/reg\n");
>      }
> --
> 1.7.1
>
>
Peter Maydell July 5, 2012, 7:26 p.m. UTC | #2 
On 5 July 2012 19:53, Blue Swirl <blauwirbel@gmail.com> wrote:
> On Thu, Jul 5, 2012 at 5:00 PM, Peter Maydell <peter.maydell@linaro.org> wrote:
>> @@ -236,8 +237,37 @@ static int load_dtb(target_phys_addr_t addr, const struct arm_boot_info *binfo)
>>      }
>>      g_free(filename);
>>
>> +    acells = qemu_devtree_getprop_cell(fdt, "/", "#address-cells");
>> +    scells = qemu_devtree_getprop_cell(fdt, "/", "#size-cells");
>> +    printf("fdt: acells %d scells %d\n", acells, scells);
>
> Leftover debugging?

Doh. Yes, will remove printf in v2.

-- PMM
Peter A. G. Crosthwaite July 6, 2012, 2:19 a.m. UTC | #3 
On Fri, Jul 6, 2012 at 3:00 AM, Peter Maydell <peter.maydell@linaro.org> wrote:
> Support the case where the device tree blob specifies that
> #address-cells and #size-cells are greater than 1. (This
> is needed for device trees which can handle 64 bit physical
> addresses and thus total RAM sizes over 4GB.)
>
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>

> ---
>  hw/arm_boot.c |   36 +++++++++++++++++++++++++++++++++---
>  1 files changed, 33 insertions(+), 3 deletions(-)
>
> diff --git a/hw/arm_boot.c b/hw/arm_boot.c
> index 7366427..8203422 100644
> --- a/hw/arm_boot.c
> +++ b/hw/arm_boot.c
> @@ -216,11 +216,12 @@ static void set_kernel_args_old(const struct arm_boot_info *info)
>  static int load_dtb(target_phys_addr_t addr, const struct arm_boot_info *binfo)
>  {
>  #ifdef CONFIG_FDT
> -    uint32_t mem_reg_property[] = { cpu_to_be32(binfo->loader_start),
> -                                    cpu_to_be32(binfo->ram_size) };
> +    uint32_t *mem_reg_property;
> +    uint32_t mem_reg_propsize;
>      void *fdt = NULL;
>      char *filename;
>      int size, rc;
> +    uint32_t acells, scells, hival;
>
>      filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, binfo->dtb_filename);
>      if (!filename) {
> @@ -236,8 +237,37 @@ static int load_dtb(target_phys_addr_t addr, const struct arm_boot_info *binfo)
>      }
>      g_free(filename);
>
> +    acells = qemu_devtree_getprop_cell(fdt, "/", "#address-cells");
> +    scells = qemu_devtree_getprop_cell(fdt, "/", "#size-cells");
> +    printf("fdt: acells %d scells %d\n", acells, scells);
> +    if (acells == 0 || scells == 0) {
> +        fprintf(stderr, "dtb file invalid (#address-cells or #size-cells 0)\n");
> +        return -1;
> +    }
> +
> +    mem_reg_propsize = acells + scells;
> +    mem_reg_property = g_new0(uint32_t, mem_reg_propsize);
> +    mem_reg_property[acells - 1] = cpu_to_be32(binfo->loader_start);
> +    hival = cpu_to_be32(binfo->loader_start >> 32);
> +    if (acells > 1) {
> +        mem_reg_property[acells - 2] = hival;
> +    } else if (hival != 0) {
> +        fprintf(stderr, "qemu: dtb file not compatible with "
> +                "RAM start address > 4GB\n");
> +        exit(1);
> +    }
> +    mem_reg_property[acells + scells - 1] = cpu_to_be32(binfo->ram_size);
> +    hival = cpu_to_be32(binfo->ram_size >> 32);
> +    if (scells > 1) {
> +        mem_reg_property[acells + scells - 2] = hival;
> +    } else if (hival != 0) {
> +        fprintf(stderr, "qemu: dtb file not compatible with "
> +                "RAM size > 4GB\n");
> +        exit(1);
> +    }
> +
>      rc = qemu_devtree_setprop(fdt, "/memory", "reg", mem_reg_property,
> -                               sizeof(mem_reg_property));
> +                              mem_reg_propsize * sizeof(uint32_t));
>      if (rc < 0) {
>          fprintf(stderr, "couldn't set /memory/reg\n");
>      }
> --
> 1.7.1
>
diff mbox

Patch

diff --git a/hw/arm_boot.c b/hw/arm_boot.c
index 7366427..8203422 100644
--- a/hw/arm_boot.c
+++ b/hw/arm_boot.c
@@ -216,11 +216,12 @@  static void set_kernel_args_old(const struct arm_boot_info *info)
 static int load_dtb(target_phys_addr_t addr, const struct arm_boot_info *binfo)
 {
 #ifdef CONFIG_FDT
-    uint32_t mem_reg_property[] = { cpu_to_be32(binfo->loader_start),
-                                    cpu_to_be32(binfo->ram_size) };
+    uint32_t *mem_reg_property;
+    uint32_t mem_reg_propsize;
     void *fdt = NULL;
     char *filename;
     int size, rc;
+    uint32_t acells, scells, hival;
 
     filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, binfo->dtb_filename);
     if (!filename) {
@@ -236,8 +237,37 @@  static int load_dtb(target_phys_addr_t addr, const struct arm_boot_info *binfo)
     }
     g_free(filename);
 
+    acells = qemu_devtree_getprop_cell(fdt, "/", "#address-cells");
+    scells = qemu_devtree_getprop_cell(fdt, "/", "#size-cells");
+    printf("fdt: acells %d scells %d\n", acells, scells);
+    if (acells == 0 || scells == 0) {
+        fprintf(stderr, "dtb file invalid (#address-cells or #size-cells 0)\n");
+        return -1;
+    }
+
+    mem_reg_propsize = acells + scells;
+    mem_reg_property = g_new0(uint32_t, mem_reg_propsize);
+    mem_reg_property[acells - 1] = cpu_to_be32(binfo->loader_start);
+    hival = cpu_to_be32(binfo->loader_start >> 32);
+    if (acells > 1) {
+        mem_reg_property[acells - 2] = hival;
+    } else if (hival != 0) {
+        fprintf(stderr, "qemu: dtb file not compatible with "
+                "RAM start address > 4GB\n");
+        exit(1);
+    }
+    mem_reg_property[acells + scells - 1] = cpu_to_be32(binfo->ram_size);
+    hival = cpu_to_be32(binfo->ram_size >> 32);
+    if (scells > 1) {
+        mem_reg_property[acells + scells - 2] = hival;
+    } else if (hival != 0) {
+        fprintf(stderr, "qemu: dtb file not compatible with "
+                "RAM size > 4GB\n");
+        exit(1);
+    }
+
     rc = qemu_devtree_setprop(fdt, "/memory", "reg", mem_reg_property,
-                               sizeof(mem_reg_property));
+                              mem_reg_propsize * sizeof(uint32_t));
     if (rc < 0) {
         fprintf(stderr, "couldn't set /memory/reg\n");
     }