| Message ID | 201206050858.26877.sr@denx.de |
|---|---|
| State | Superseded |
| Delegated to: | Albert ARIBAUD |
| Headers | show |
Hi Albert, as you requested, here a short reminder... On Tuesday 05 June 2012 08:58:26 Stefan Roese wrote: > Hi Albert! > > I have collected all of the remaining ARM/SPEAr patches in my > staging repository. There are some dependencies between the > patches, so I also added the NOR, NAND and ethernet patches > in this pull request. The patches have the Acked-by from the > corresponding custodians (Joe for networking, Scott for NAND, > myself for NOR). > > Since most of the patches are ARM/SPEAr platform related, I'm > pushing the patchset through your ARM repository. Please pull > and push to Wolfgang. > > Thanks, > Stefan > > > The following changes since commit > 4398d55991eb3c2484a2a8e991d701e5d7a64874: > > net: sh-eth: Add support Gigabit of SH7734 (2012-05-23 17:53:09 -0500) > > are available in the git repository at: > > git://www.denx.de/git/u-boot-staging.git sr@denx.de > > for you to fetch changes up to e94b7cb06a246532aba7af9e0f2040d4facba5db: > > MTD: SPEAr SMI: Add write support for length < 4 bytes (2012-06-05 > 08:42:50 +0200) > > ---------------------------------------------------------------- > Amit Virdi (10): > st_smi: Return error in case TFF is not set > st_smi: Change SMI timeout values > st_smi: Enhance the error handling > st_smi: Change timeout loop implementation > SPEAr: Fix ARM relocation support > SPEAr: Eliminate dependency on Xloader table > SPEAr: Initialize SNOR in early_board_init_f > SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access > cleanup/SPEAr: Remove unnecessary parenthesis > cleanup/SPEAr: Define configuration flags more elegantly > > Armando Visconti (4): > st_smi: Removed no needed dependency on ST_M25Pxx_ID > st_smi: Change the flash probing method > st_smi: Fix bug in flash_print_info() > st_smi: Fixed page size for Winbond W25Q128FV flash > > Shiraz Hashim (5): > st_smi: Move status register read before modifying ctrl register > SPEAr: Enable autoneg for ethernet > SPEAr: Enable dcache for fast file transfer > SPEAr: explicitly select clk src for UART > SPEAr: Correct SoC ID offset in misc configuration space > > Simon Glass (1): > arm: Don't use printf() in SPL builds > > Stefan Roese (10): > net: Multiple updates/enhancements to designware.c > GPIO: Add SPEAr GPIO driver > SPL: common/Makefile: Add image.c to SPL build > SPL: lib/Makefile: Add crc32.c to SPL build > SPL: ARM: spear: Remove some objects from SPL build > Makefile: Add u-boot.spr build target (SPEAr) > SPL: ARM: spear: Add SPL support for SPEAr600 platform > rtc/m41t62: Add support for M41T82 with HT (Halt Update) > i2c: designware_i2c.c: Add support for the "i2c probe" command > MTD: SPEAr SMI: Add write support for length < 4 bytes > > Vipin KUMAR (14): > mtd/NAND: Add FSMC driver support > SPEAr: Configure FSMC driver for NAND interface > mtd/NAND: Remove obsolete SPEAr specific NAND drivers > st_smi: Add support for SPEAr SMI driver > st_smi: Read status until timeout happens > SPEAr: Place ethaddr write and read within CONFIG_CMD_NET > SPEAr: Configure network support for spear SoCs > SPEAr: Add macb driver support for spear310 and spear320 > SPEAr: Add basic arch related support for SPEAr SoCs > SPEAr: Add configuration options for spear3xx and spear6xx boards > SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK) > SPEAr: Change the default environment variables > SPEAr: Enable usb device high speed support > SPEAr: Enable udc and usb-console support only for usbtty > configuration > > Vipin Kumar (6): > st_smi: Fix smi read status > SPEAr: Add interface information in initialization > SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION > SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE > SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro > SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb > > Makefile | 17 + > arch/arm/cpu/arm926ejs/spear/Makefile | 25 +- > arch/arm/cpu/arm926ejs/spear/cpu.c | 87 ++++ > arch/arm/cpu/arm926ejs/spear/spear600.c | 236 ++++++++++ > arch/arm/cpu/arm926ejs/spear/spl.c | 282 ++++++++++++ > arch/arm/cpu/arm926ejs/spear/spl_boot.c | 197 ++++++++ > .../spear/spr600_mt47h128m8_3_266_cl5_async.c | 130 ++++++ > .../spear/spr600_mt47h32m16_333_cl5_psync.c | 135 ++++++ > .../spear/spr600_mt47h32m16_37e_166_cl4_sync.c | 130 ++++++ > .../spear/spr600_mt47h64m16_3_333_cl5_psync.c | 144 ++++++ > arch/arm/cpu/arm926ejs/spear/start.S | 122 +++++ > arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 87 ++++ > arch/arm/include/asm/arch-spear/clk.h | 27 ++ > arch/arm/include/asm/arch-spear/gpio.h | 40 ++ > arch/arm/include/asm/arch-spear/hardware.h | 63 ++- > arch/arm/include/asm/arch-spear/spr_defs.h | 23 + > arch/arm/include/asm/arch-spear/spr_gpt.h | 4 +- > arch/arm/include/asm/arch-spear/spr_misc.h | 147 +++++- > arch/arm/include/asm/arch-spear/spr_nand.h | 57 --- > arch/arm/include/asm/arch-spear/spr_ssp.h | 45 ++ > arch/arm/include/asm/arch-spear/spr_syscntl.h | 14 + > .../arm/include/asm/arch-spear/spr_xloader_table.h | 67 --- > arch/arm/lib/eabi_compat.c | 3 +- > board/spear/common/Makefile | 2 + > board/spear/common/spr_misc.c | 102 ++-- > board/spear/spear300/config.mk | 39 -- > board/spear/spear300/spear300.c | 27 +- > board/spear/spear310/config.mk | 44 -- > board/spear/spear310/spear310.c | 44 +- > board/spear/spear320/config.mk | 44 -- > board/spear/spear320/spear320.c | 43 +- > board/spear/spear600/Makefile | 2 + > board/spear/spear600/config.mk | 39 -- > board/spear/spear600/spear600.c | 30 +- > boards.cfg | 24 +- > common/Makefile | 2 +- > config.mk | 4 + > doc/README.spear | 54 ++- > drivers/gpio/Makefile | 1 + > drivers/gpio/spear_gpio.c | 102 ++++ > drivers/i2c/designware_i2c.c | 16 +- > drivers/mtd/Makefile | 2 +- > drivers/mtd/nand/Makefile | 1 + > drivers/mtd/nand/fsmc_nand.c | 486 > ++++++++++++++++++++ drivers/mtd/nand/spr_nand.c | > 124 ----- > drivers/mtd/{spr_smi.c => st_smi.c} | 255 ++++++---- > drivers/net/designware.c | 126 +++-- > drivers/net/designware.h | 2 + > drivers/rtc/m41t62.c | 10 +- > include/configs/spear-common.h | 94 ++-- > include/configs/{spear3xx.h => spear3xx_evb.h} | 62 ++- > include/configs/{spear6xx.h => spear6xx_evb.h} | 20 +- > include/linux/mtd/fsmc_nand.h | 101 ++++ > .../spr_smi.h => include/linux/mtd/st_smi.h | 10 +- > include/netdev.h | 2 +- > lib/Makefile | 2 +- > 56 files changed, 3229 insertions(+), 769 deletions(-) > create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c > create mode 100644 arch/arm/cpu/arm926ejs/spear/spear600.c > create mode 100644 arch/arm/cpu/arm926ejs/spear/spl.c > create mode 100644 arch/arm/cpu/arm926ejs/spear/spl_boot.c > create mode 100644 > arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c create > mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c > create mode 100644 > arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c create > mode 100644 > arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c create > mode 100644 arch/arm/cpu/arm926ejs/spear/start.S > create mode 100644 arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds > create mode 100644 arch/arm/include/asm/arch-spear/clk.h > create mode 100644 arch/arm/include/asm/arch-spear/gpio.h > delete mode 100644 arch/arm/include/asm/arch-spear/spr_nand.h > create mode 100644 arch/arm/include/asm/arch-spear/spr_ssp.h > delete mode 100644 arch/arm/include/asm/arch-spear/spr_xloader_table.h > delete mode 100644 board/spear/spear300/config.mk > delete mode 100644 board/spear/spear310/config.mk > delete mode 100644 board/spear/spear320/config.mk > delete mode 100644 board/spear/spear600/config.mk > create mode 100644 drivers/gpio/spear_gpio.c > create mode 100644 drivers/mtd/nand/fsmc_nand.c > delete mode 100644 drivers/mtd/nand/spr_nand.c > rename drivers/mtd/{spr_smi.c => st_smi.c} (62%) > rename include/configs/{spear3xx.h => spear3xx_evb.h} (72%) > rename include/configs/{spear6xx.h => spear6xx_evb.h} (74%) > create mode 100644 include/linux/mtd/fsmc_nand.h > rename arch/arm/include/asm/arch-spear/spr_smi.h => > include/linux/mtd/st_smi.h (95%) > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot
Hi Stefan, On Fri, 22 Jun 2012 08:01:15 +0200, Stefan Roese <sr@denx.de> wrote: > Hi Albert, > > as you requested, here a short reminder... > > On Tuesday 05 June 2012 08:58:26 Stefan Roese wrote: > > Hi Albert! > > > > I have collected all of the remaining ARM/SPEAr patches in my > > staging repository. There are some dependencies between the > > patches, so I also added the NOR, NAND and ethernet patches > > in this pull request. The patches have the Acked-by from the > > corresponding custodians (Joe for networking, Scott for NAND, > > myself for NOR). > > > > Since most of the patches are ARM/SPEAr platform related, I'm > > pushing the patchset through your ARM repository. Please pull > > and push to Wolfgang. > > > > Thanks, > > Stefan > > > > > > The following changes since commit > > 4398d55991eb3c2484a2a8e991d701e5d7a64874: > > > > net: sh-eth: Add support Gigabit of SH7734 (2012-05-23 17:53:09 > > -0500) > > > > are available in the git repository at: > > > > git://www.denx.de/git/u-boot-staging.git sr@denx.de > > > > for you to fetch changes up to > > e94b7cb06a246532aba7af9e0f2040d4facba5db: > > > > MTD: SPEAr SMI: Add write support for length < 4 bytes (2012-06-05 > > 08:42:50 +0200) Assigned to myself under review in patchwork, thanks. Amicalement,
Hi Albert, as you seem to be working on U-Boot patches right now, here another short reminder from me. ;) Thanks, Stefan On Friday 22 June 2012 08:01:15 Stefan Roese wrote: > Hi Albert, > > as you requested, here a short reminder... > > On Tuesday 05 June 2012 08:58:26 Stefan Roese wrote: > > Hi Albert! > > > > I have collected all of the remaining ARM/SPEAr patches in my > > staging repository. There are some dependencies between the > > patches, so I also added the NOR, NAND and ethernet patches > > in this pull request. The patches have the Acked-by from the > > corresponding custodians (Joe for networking, Scott for NAND, > > myself for NOR). > > > > Since most of the patches are ARM/SPEAr platform related, I'm > > pushing the patchset through your ARM repository. Please pull > > and push to Wolfgang. > > > > Thanks, > > Stefan > > > > > > The following changes since commit > > > > 4398d55991eb3c2484a2a8e991d701e5d7a64874: > > net: sh-eth: Add support Gigabit of SH7734 (2012-05-23 17:53:09 -0500) > > > > are available in the git repository at: > > git://www.denx.de/git/u-boot-staging.git sr@denx.de > > > > for you to fetch changes up to e94b7cb06a246532aba7af9e0f2040d4facba5db: > > MTD: SPEAr SMI: Add write support for length < 4 bytes (2012-06-05 > > > > 08:42:50 +0200) > > > > ---------------------------------------------------------------- > > > > Amit Virdi (10): > > st_smi: Return error in case TFF is not set > > st_smi: Change SMI timeout values > > st_smi: Enhance the error handling > > st_smi: Change timeout loop implementation > > SPEAr: Fix ARM relocation support > > SPEAr: Eliminate dependency on Xloader table > > SPEAr: Initialize SNOR in early_board_init_f > > SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access > > cleanup/SPEAr: Remove unnecessary parenthesis > > cleanup/SPEAr: Define configuration flags more elegantly > > > > Armando Visconti (4): > > st_smi: Removed no needed dependency on ST_M25Pxx_ID > > st_smi: Change the flash probing method > > st_smi: Fix bug in flash_print_info() > > st_smi: Fixed page size for Winbond W25Q128FV flash > > > > Shiraz Hashim (5): > > st_smi: Move status register read before modifying ctrl register > > SPEAr: Enable autoneg for ethernet > > SPEAr: Enable dcache for fast file transfer > > SPEAr: explicitly select clk src for UART > > SPEAr: Correct SoC ID offset in misc configuration space > > > > Simon Glass (1): > > arm: Don't use printf() in SPL builds > > > > Stefan Roese (10): > > net: Multiple updates/enhancements to designware.c > > GPIO: Add SPEAr GPIO driver > > SPL: common/Makefile: Add image.c to SPL build > > SPL: lib/Makefile: Add crc32.c to SPL build > > SPL: ARM: spear: Remove some objects from SPL build > > Makefile: Add u-boot.spr build target (SPEAr) > > SPL: ARM: spear: Add SPL support for SPEAr600 platform > > rtc/m41t62: Add support for M41T82 with HT (Halt Update) > > i2c: designware_i2c.c: Add support for the "i2c probe" command > > MTD: SPEAr SMI: Add write support for length < 4 bytes > > > > Vipin KUMAR (14): > > mtd/NAND: Add FSMC driver support > > SPEAr: Configure FSMC driver for NAND interface > > mtd/NAND: Remove obsolete SPEAr specific NAND drivers > > st_smi: Add support for SPEAr SMI driver > > st_smi: Read status until timeout happens > > SPEAr: Place ethaddr write and read within CONFIG_CMD_NET > > SPEAr: Configure network support for spear SoCs > > SPEAr: Add macb driver support for spear310 and spear320 > > SPEAr: Add basic arch related support for SPEAr SoCs > > SPEAr: Add configuration options for spear3xx and spear6xx boards > > SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK) > > SPEAr: Change the default environment variables > > SPEAr: Enable usb device high speed support > > SPEAr: Enable udc and usb-console support only for usbtty > > > > configuration > > > > Vipin Kumar (6): > > st_smi: Fix smi read status > > SPEAr: Add interface information in initialization > > SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION > > SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE > > SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro > > SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and > > evb > > > > Makefile | 17 + > > arch/arm/cpu/arm926ejs/spear/Makefile | 25 +- > > arch/arm/cpu/arm926ejs/spear/cpu.c | 87 ++++ > > arch/arm/cpu/arm926ejs/spear/spear600.c | 236 ++++++++++ > > arch/arm/cpu/arm926ejs/spear/spl.c | 282 ++++++++++++ > > arch/arm/cpu/arm926ejs/spear/spl_boot.c | 197 ++++++++ > > .../spear/spr600_mt47h128m8_3_266_cl5_async.c | 130 ++++++ > > .../spear/spr600_mt47h32m16_333_cl5_psync.c | 135 ++++++ > > .../spear/spr600_mt47h32m16_37e_166_cl4_sync.c | 130 ++++++ > > .../spear/spr600_mt47h64m16_3_333_cl5_psync.c | 144 ++++++ > > arch/arm/cpu/arm926ejs/spear/start.S | 122 +++++ > > arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 87 ++++ > > arch/arm/include/asm/arch-spear/clk.h | 27 ++ > > arch/arm/include/asm/arch-spear/gpio.h | 40 ++ > > arch/arm/include/asm/arch-spear/hardware.h | 63 ++- > > arch/arm/include/asm/arch-spear/spr_defs.h | 23 + > > arch/arm/include/asm/arch-spear/spr_gpt.h | 4 +- > > arch/arm/include/asm/arch-spear/spr_misc.h | 147 +++++- > > arch/arm/include/asm/arch-spear/spr_nand.h | 57 --- > > arch/arm/include/asm/arch-spear/spr_ssp.h | 45 ++ > > arch/arm/include/asm/arch-spear/spr_syscntl.h | 14 + > > .../arm/include/asm/arch-spear/spr_xloader_table.h | 67 --- > > arch/arm/lib/eabi_compat.c | 3 +- > > board/spear/common/Makefile | 2 + > > board/spear/common/spr_misc.c | 102 ++-- > > board/spear/spear300/config.mk | 39 -- > > board/spear/spear300/spear300.c | 27 +- > > board/spear/spear310/config.mk | 44 -- > > board/spear/spear310/spear310.c | 44 +- > > board/spear/spear320/config.mk | 44 -- > > board/spear/spear320/spear320.c | 43 +- > > board/spear/spear600/Makefile | 2 + > > board/spear/spear600/config.mk | 39 -- > > board/spear/spear600/spear600.c | 30 +- > > boards.cfg | 24 +- > > common/Makefile | 2 +- > > config.mk | 4 + > > doc/README.spear | 54 ++- > > drivers/gpio/Makefile | 1 + > > drivers/gpio/spear_gpio.c | 102 ++++ > > drivers/i2c/designware_i2c.c | 16 +- > > drivers/mtd/Makefile | 2 +- > > drivers/mtd/nand/Makefile | 1 + > > drivers/mtd/nand/fsmc_nand.c | 486 > > > > ++++++++++++++++++++ drivers/mtd/nand/spr_nand.c | > > 124 ----- > > > > drivers/mtd/{spr_smi.c => st_smi.c} | 255 ++++++---- > > drivers/net/designware.c | 126 +++-- > > drivers/net/designware.h | 2 + > > drivers/rtc/m41t62.c | 10 +- > > include/configs/spear-common.h | 94 ++-- > > include/configs/{spear3xx.h => spear3xx_evb.h} | 62 ++- > > include/configs/{spear6xx.h => spear6xx_evb.h} | 20 +- > > include/linux/mtd/fsmc_nand.h | 101 ++++ > > .../spr_smi.h => include/linux/mtd/st_smi.h | 10 +- > > include/netdev.h | 2 +- > > lib/Makefile | 2 +- > > 56 files changed, 3229 insertions(+), 769 deletions(-) > > create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c > > create mode 100644 arch/arm/cpu/arm926ejs/spear/spear600.c > > create mode 100644 arch/arm/cpu/arm926ejs/spear/spl.c > > create mode 100644 arch/arm/cpu/arm926ejs/spear/spl_boot.c > > create mode 100644 > > > > arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c create > > mode 100644 > > arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c create > > mode 100644 > > arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c create > > mode 100644 > > arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c create > > mode 100644 arch/arm/cpu/arm926ejs/spear/start.S > > > > create mode 100644 arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds > > create mode 100644 arch/arm/include/asm/arch-spear/clk.h > > create mode 100644 arch/arm/include/asm/arch-spear/gpio.h > > delete mode 100644 arch/arm/include/asm/arch-spear/spr_nand.h > > create mode 100644 arch/arm/include/asm/arch-spear/spr_ssp.h > > delete mode 100644 arch/arm/include/asm/arch-spear/spr_xloader_table.h > > delete mode 100644 board/spear/spear300/config.mk > > delete mode 100644 board/spear/spear310/config.mk > > delete mode 100644 board/spear/spear320/config.mk > > delete mode 100644 board/spear/spear600/config.mk > > create mode 100644 drivers/gpio/spear_gpio.c > > create mode 100644 drivers/mtd/nand/fsmc_nand.c > > delete mode 100644 drivers/mtd/nand/spr_nand.c > > rename drivers/mtd/{spr_smi.c => st_smi.c} (62%) > > rename include/configs/{spear3xx.h => spear3xx_evb.h} (72%) > > rename include/configs/{spear6xx.h => spear6xx_evb.h} (74%) > > create mode 100644 include/linux/mtd/fsmc_nand.h > > rename arch/arm/include/asm/arch-spear/spr_smi.h => > > > > include/linux/mtd/st_smi.h (95%) > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > http://lists.denx.de/mailman/listinfo/u-boot
Hi Stefan, On Thu, 5 Jul 2012 15:10:26 +0200, Stefan Roese <sr@denx.de> wrote: > Hi Albert, > > as you seem to be working on U-Boot patches right now, here another short > reminder from me. ;) > > Thanks, > Stefan Can you rebase this on current uboot-arm? Sorry for the inconvenience. Amicalement,
Hi Albert! I have collected all of the remaining ARM/SPEAr patches in my staging repository. There are some dependencies between the patches, so I also added the NOR, NAND and ethernet patches in this pull request. The patches have the Acked-by from the corresponding custodians (Joe for networking, Scott for NAND, myself for NOR). Since most of the patches are ARM/SPEAr platform related, I'm pushing the patchset through your ARM repository. Please pull and push to Wolfgang. Thanks, Stefan The following changes since commit 4398d55991eb3c2484a2a8e991d701e5d7a64874: net: sh-eth: Add support Gigabit of SH7734 (2012-05-23 17:53:09 -0500) are available in the git repository at: git://www.denx.de/git/u-boot-staging.git sr@denx.de for you to fetch changes up to e94b7cb06a246532aba7af9e0f2040d4facba5db: MTD: SPEAr SMI: Add write support for length < 4 bytes (2012-06-05 08:42:50 +0200) ---------------------------------------------------------------- Amit Virdi (10): st_smi: Return error in case TFF is not set st_smi: Change SMI timeout values st_smi: Enhance the error handling st_smi: Change timeout loop implementation SPEAr: Fix ARM relocation support SPEAr: Eliminate dependency on Xloader table SPEAr: Initialize SNOR in early_board_init_f SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access cleanup/SPEAr: Remove unnecessary parenthesis cleanup/SPEAr: Define configuration flags more elegantly Armando Visconti (4): st_smi: Removed no needed dependency on ST_M25Pxx_ID st_smi: Change the flash probing method st_smi: Fix bug in flash_print_info() st_smi: Fixed page size for Winbond W25Q128FV flash Shiraz Hashim (5): st_smi: Move status register read before modifying ctrl register SPEAr: Enable autoneg for ethernet SPEAr: Enable dcache for fast file transfer SPEAr: explicitly select clk src for UART SPEAr: Correct SoC ID offset in misc configuration space Simon Glass (1): arm: Don't use printf() in SPL builds Stefan Roese (10): net: Multiple updates/enhancements to designware.c GPIO: Add SPEAr GPIO driver SPL: common/Makefile: Add image.c to SPL build SPL: lib/Makefile: Add crc32.c to SPL build SPL: ARM: spear: Remove some objects from SPL build Makefile: Add u-boot.spr build target (SPEAr) SPL: ARM: spear: Add SPL support for SPEAr600 platform rtc/m41t62: Add support for M41T82 with HT (Halt Update) i2c: designware_i2c.c: Add support for the "i2c probe" command MTD: SPEAr SMI: Add write support for length < 4 bytes Vipin KUMAR (14): mtd/NAND: Add FSMC driver support SPEAr: Configure FSMC driver for NAND interface mtd/NAND: Remove obsolete SPEAr specific NAND drivers st_smi: Add support for SPEAr SMI driver st_smi: Read status until timeout happens SPEAr: Place ethaddr write and read within CONFIG_CMD_NET SPEAr: Configure network support for spear SoCs SPEAr: Add macb driver support for spear310 and spear320 SPEAr: Add basic arch related support for SPEAr SoCs SPEAr: Add configuration options for spear3xx and spear6xx boards SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK) SPEAr: Change the default environment variables SPEAr: Enable usb device high speed support SPEAr: Enable udc and usb-console support only for usbtty configuration Vipin Kumar (6): st_smi: Fix smi read status SPEAr: Add interface information in initialization SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb Makefile | 17 + arch/arm/cpu/arm926ejs/spear/Makefile | 25 +- arch/arm/cpu/arm926ejs/spear/cpu.c | 87 ++++ arch/arm/cpu/arm926ejs/spear/spear600.c | 236 ++++++++++ arch/arm/cpu/arm926ejs/spear/spl.c | 282 ++++++++++++ arch/arm/cpu/arm926ejs/spear/spl_boot.c | 197 ++++++++ .../spear/spr600_mt47h128m8_3_266_cl5_async.c | 130 ++++++ .../spear/spr600_mt47h32m16_333_cl5_psync.c | 135 ++++++ .../spear/spr600_mt47h32m16_37e_166_cl4_sync.c | 130 ++++++ .../spear/spr600_mt47h64m16_3_333_cl5_psync.c | 144 ++++++ arch/arm/cpu/arm926ejs/spear/start.S | 122 +++++ arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 87 ++++ arch/arm/include/asm/arch-spear/clk.h | 27 ++ arch/arm/include/asm/arch-spear/gpio.h | 40 ++ arch/arm/include/asm/arch-spear/hardware.h | 63 ++- arch/arm/include/asm/arch-spear/spr_defs.h | 23 + arch/arm/include/asm/arch-spear/spr_gpt.h | 4 +- arch/arm/include/asm/arch-spear/spr_misc.h | 147 +++++- arch/arm/include/asm/arch-spear/spr_nand.h | 57 --- arch/arm/include/asm/arch-spear/spr_ssp.h | 45 ++ arch/arm/include/asm/arch-spear/spr_syscntl.h | 14 + .../arm/include/asm/arch-spear/spr_xloader_table.h | 67 --- arch/arm/lib/eabi_compat.c | 3 +- board/spear/common/Makefile | 2 + board/spear/common/spr_misc.c | 102 ++-- board/spear/spear300/config.mk | 39 -- board/spear/spear300/spear300.c | 27 +- board/spear/spear310/config.mk | 44 -- board/spear/spear310/spear310.c | 44 +- board/spear/spear320/config.mk | 44 -- board/spear/spear320/spear320.c | 43 +- board/spear/spear600/Makefile | 2 + board/spear/spear600/config.mk | 39 -- board/spear/spear600/spear600.c | 30 +- boards.cfg | 24 +- common/Makefile | 2 +- config.mk | 4 + doc/README.spear | 54 ++- drivers/gpio/Makefile | 1 + drivers/gpio/spear_gpio.c | 102 ++++ drivers/i2c/designware_i2c.c | 16 +- drivers/mtd/Makefile | 2 +- drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/fsmc_nand.c | 486 ++++++++++++++++++++ drivers/mtd/nand/spr_nand.c | 124 ----- drivers/mtd/{spr_smi.c => st_smi.c} | 255 ++++++---- drivers/net/designware.c | 126 +++-- drivers/net/designware.h | 2 + drivers/rtc/m41t62.c | 10 +- include/configs/spear-common.h | 94 ++-- include/configs/{spear3xx.h => spear3xx_evb.h} | 62 ++- include/configs/{spear6xx.h => spear6xx_evb.h} | 20 +- include/linux/mtd/fsmc_nand.h | 101 ++++ .../spr_smi.h => include/linux/mtd/st_smi.h | 10 +- include/netdev.h | 2 +- lib/Makefile | 2 +- 56 files changed, 3229 insertions(+), 769 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c create mode 100644 arch/arm/cpu/arm926ejs/spear/spear600.c create mode 100644 arch/arm/cpu/arm926ejs/spear/spl.c create mode 100644 arch/arm/cpu/arm926ejs/spear/spl_boot.c create mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c create mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c create mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c create mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c create mode 100644 arch/arm/cpu/arm926ejs/spear/start.S create mode 100644 arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds create mode 100644 arch/arm/include/asm/arch-spear/clk.h create mode 100644 arch/arm/include/asm/arch-spear/gpio.h delete mode 100644 arch/arm/include/asm/arch-spear/spr_nand.h create mode 100644 arch/arm/include/asm/arch-spear/spr_ssp.h delete mode 100644 arch/arm/include/asm/arch-spear/spr_xloader_table.h delete mode 100644 board/spear/spear300/config.mk delete mode 100644 board/spear/spear310/config.mk delete mode 100644 board/spear/spear320/config.mk delete mode 100644 board/spear/spear600/config.mk create mode 100644 drivers/gpio/spear_gpio.c create mode 100644 drivers/mtd/nand/fsmc_nand.c delete mode 100644 drivers/mtd/nand/spr_nand.c rename drivers/mtd/{spr_smi.c => st_smi.c} (62%) rename include/configs/{spear3xx.h => spear3xx_evb.h} (72%) rename include/configs/{spear6xx.h => spear6xx_evb.h} (74%) create mode 100644 include/linux/mtd/fsmc_nand.h rename arch/arm/include/asm/arch-spear/spr_smi.h => include/linux/mtd/st_smi.h (95%)