| Message ID | 1340087992-2399-4-git-send-email-benh@kernel.crashing.org |
|---|---|
| State | New |
| Headers | show |
On 06/19/2012 01:39 AM, Benjamin Herrenschmidt wrote: > From: David Gibson<david@gibson.dropbear.id.au> > > Not that long ago, every device implementation using DMA directly > accessed guest memory using cpu_physical_memory_*(). This meant that > adding support for a guest visible IOMMU would require changing every > one of these devices to go through IOMMU translation. > > Shortly before qemu 1.0, I made a start on fixing this by providing > helper functions for PCI DMA. These are currently just stubs which > call the direct access functions, but mean that an IOMMU can be > implemented in one place, rather than for every PCI device. > > Clearly, this doesn't help for non PCI devices, which could also be > IOMMU translated on some platforms. It is also problematic for the > devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we > cannot use the the pci_dma_*() functions, because they assume the > presence of a PCIDevice, but we don't want to have to check between > pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the > device code. > > This patch makes the first step on addressing both these problems, by > introducing new (stub) dma helper functions which can be used for any > DMA capable device. > > These dma functions take a DMAContext *, a new (currently empty) > variable describing the DMA address space in which the operation is to > take place. NULL indicates untranslated DMA directly into guest > physical address space. The intention is that in future non-NULL > values will given information about any necessary IOMMU translation. > > DMA using devices must obtain a DMAContext (or, potentially, contexts) > from their bus or platform. For now this patch just converts the PCI > wrappers to be implemented in terms of the universal wrappers, > converting other drivers can take place over time. > > Cc: Michael S. Tsirkin<mst@redhat.com> > Cc: Eduard - Gabriel Munteanu<eduard.munteanu@linux360.ro> > Cc: Richard Henderson<rth@twiddle.net> > > Signed-off-by: David Gibson<david@gibson.dropbear.id.au> > Signed-off-by: Benjamin Herrenschmidt<benh@kernel.crashing.org> > --- > dma.h | 100 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > hw/pci.h | 21 ++++++------ > qemu-common.h | 1 + > 3 files changed, 113 insertions(+), 9 deletions(-) > > diff --git a/dma.h b/dma.h > index fe08b72..4449a0c 100644 > --- a/dma.h > +++ b/dma.h > @@ -34,6 +34,106 @@ typedef target_phys_addr_t dma_addr_t; > #define DMA_ADDR_BITS TARGET_PHYS_ADDR_BITS > #define DMA_ADDR_FMT TARGET_FMT_plx > > +/* Checks that the given range of addresses is valid for DMA. This is > + * useful for certain cases, but usually you should just use > + * dma_memory_{read,write}() and check for errors */ > +static inline bool dma_memory_valid(DMAContext *dma, dma_addr_t addr, > + dma_addr_t len, DMADirection dir) > +{ > + /* Stub version, with no iommu we assume all bus addresses are valid */ > + return true; > +} > + > +static inline int dma_memory_rw(DMAContext *dma, dma_addr_t addr, > + void *buf, dma_addr_t len, DMADirection dir) > +{ > + /* Stub version when we have no iommu support */ > + cpu_physical_memory_rw(addr, buf, (target_phys_addr_t)len, > + dir == DMA_DIRECTION_FROM_DEVICE); > + return 0; > +} > + > +static inline int dma_memory_read(DMAContext *dma, dma_addr_t addr, > + void *buf, dma_addr_t len) > +{ > + return dma_memory_rw(dma, addr, buf, len, DMA_DIRECTION_TO_DEVICE); > +} > + > +static inline int dma_memory_write(DMAContext *dma, dma_addr_t addr, > + const void *buf, dma_addr_t len) > +{ > + return dma_memory_rw(dma, addr, (void *)buf, len, > + DMA_DIRECTION_FROM_DEVICE); > +} > + > +static inline int dma_memory_set(DMAContext *dma, dma_addr_t addr, > + uint8_t c, dma_addr_t len) > +{ > + /* Stub version when we have no iommu support */ > + cpu_physical_memory_set(addr, c, len); > + return 0; > +} > + > +static inline void *dma_memory_map(DMAContext *dma, > + dma_addr_t addr, dma_addr_t *len, > + DMADirection dir) > +{ > + target_phys_addr_t xlen = *len; > + void *p; > + > + p = cpu_physical_memory_map(addr,&xlen, > + dir == DMA_DIRECTION_FROM_DEVICE); > + *len = xlen; > + return p; > +} > + > +static inline void dma_memory_unmap(DMAContext *dma, > + void *buffer, dma_addr_t len, > + DMADirection dir, dma_addr_t access_len) > +{ > + return cpu_physical_memory_unmap(buffer, (target_phys_addr_t)len, > + dir == DMA_DIRECTION_FROM_DEVICE, > + access_len); > +} > + > +#define DEFINE_LDST_DMA(_lname, _sname, _bits, _end) \ > + static inline uint##_bits##_t ld##_lname##_##_end##_dma(DMAContext *dma, \ > + dma_addr_t addr) \ > + { \ > + uint##_bits##_t val; \ > + dma_memory_read(dma, addr,&val, (_bits) / 8); \ > + return _end##_bits##_to_cpu(val); \ > + } \ > + static inline void st##_sname##_##_end##_dma(DMAContext *dma, \ > + dma_addr_t addr, \ > + uint##_bits##_t val) \ > + { \ > + val = cpu_to_##_end##_bits(val); \ > + dma_memory_write(dma, addr,&val, (_bits) / 8); \ > + } > + > +static inline uint8_t ldub_dma(DMAContext *dma, dma_addr_t addr) > +{ > + uint8_t val; > + > + dma_memory_read(dma, addr,&val, 1); > + return val; > +} > + > +static inline void stb_dma(DMAContext *dma, dma_addr_t addr, uint8_t val) > +{ > + dma_memory_write(dma, addr,&val, 1); > +} > + > +DEFINE_LDST_DMA(uw, w, 16, le); > +DEFINE_LDST_DMA(l, l, 32, le); > +DEFINE_LDST_DMA(q, q, 64, le); > +DEFINE_LDST_DMA(uw, w, 16, be); > +DEFINE_LDST_DMA(l, l, 32, be); > +DEFINE_LDST_DMA(q, q, 64, be); > + > +#undef DEFINE_LDST_DMA > + > struct ScatterGatherEntry { > dma_addr_t base; > dma_addr_t len; > diff --git a/hw/pci.h b/hw/pci.h > index 7f223c0..ee669d9 100644 > --- a/hw/pci.h > +++ b/hw/pci.h > @@ -558,10 +558,16 @@ static inline uint32_t pci_config_size(const PCIDevice *d) > } > > /* DMA access functions */ > +static inline DMAContext *pci_dma_context(PCIDevice *dev) > +{ > + /* Stub for when we have no PCI iommu support */ > + return NULL; > +} Why is all of this stuff static inline? > + > static inline int pci_dma_rw(PCIDevice *dev, dma_addr_t addr, > void *buf, dma_addr_t len, DMADirection dir) > { > - cpu_physical_memory_rw(addr, buf, len, dir == DMA_DIRECTION_FROM_DEVICE); > + dma_memory_rw(pci_dma_context(dev), addr, buf, len, dir); > return 0; > } > > @@ -581,12 +587,12 @@ static inline int pci_dma_write(PCIDevice *dev, dma_addr_t addr, > static inline uint##_bits##_t ld##_l##_pci_dma(PCIDevice *dev, \ > dma_addr_t addr) \ > { \ > - return ld##_l##_phys(addr); \ > + return ld##_l##_dma(pci_dma_context(dev), addr); \ > } \ > static inline void st##_s##_pci_dma(PCIDevice *dev, \ > - dma_addr_t addr, uint##_bits##_t val) \ > + dma_addr_t addr, uint##_bits##_t val) \ > { \ > - st##_s##_phys(addr, val); \ > + st##_s##_dma(pci_dma_context(dev), addr, val); \ > } > > PCI_DMA_DEFINE_LDST(ub, b, 8); > @@ -602,19 +608,16 @@ PCI_DMA_DEFINE_LDST(q_be, q_be, 64); > static inline void *pci_dma_map(PCIDevice *dev, dma_addr_t addr, > dma_addr_t *plen, DMADirection dir) > { > - target_phys_addr_t len = *plen; > void *buf; > > - buf = cpu_physical_memory_map(addr,&len, dir == DMA_DIRECTION_FROM_DEVICE); > - *plen = len; > + buf = dma_memory_map(pci_dma_context(dev), addr, plen, dir); > return buf; > } > > static inline void pci_dma_unmap(PCIDevice *dev, void *buffer, dma_addr_t len, > DMADirection dir, dma_addr_t access_len) > { > - cpu_physical_memory_unmap(buffer, len, dir == DMA_DIRECTION_FROM_DEVICE, > - access_len); > + dma_memory_unmap(pci_dma_context(dev), buffer, len, dir, access_len); > } > > static inline void pci_dma_sglist_init(QEMUSGList *qsg, PCIDevice *dev, > diff --git a/qemu-common.h b/qemu-common.h > index 8f87e41..80026af 100644 > --- a/qemu-common.h > +++ b/qemu-common.h > @@ -264,6 +264,7 @@ typedef struct EventNotifier EventNotifier; > typedef struct VirtIODevice VirtIODevice; > typedef struct QEMUSGList QEMUSGList; > typedef struct SHPCDevice SHPCDevice; > +typedef struct DMAContext DMAContext; Please don't put this in qemu-common.h. Stick it in a dma-specific header. Regards, Anthony Liguori > typedef uint64_t pcibus_t; >
On Wed, Jun 20, 2012 at 04:16:47PM -0500, Anthony Liguori wrote: > >diff --git a/hw/pci.h b/hw/pci.h > >index 7f223c0..ee669d9 100644 > >--- a/hw/pci.h > >+++ b/hw/pci.h > >@@ -558,10 +558,16 @@ static inline uint32_t pci_config_size(const PCIDevice *d) > > } > > > > /* DMA access functions */ > >+static inline DMAContext *pci_dma_context(PCIDevice *dev) > >+{ > >+ /* Stub for when we have no PCI iommu support */ > >+ return NULL; > >+} > > Why is all of this stuff static inline? Let's face it, most people don't need an MMU in their VM. inline stubs help make double sure we are not adding overhead for the sake of this niche case.
> > /* DMA access functions */ > > +static inline DMAContext *pci_dma_context(PCIDevice *dev) > > +{ > > + /* Stub for when we have no PCI iommu support */ > > + return NULL; > > +} > > Why is all of this stuff static inline? Why not ? Not doing so is gratuitous bloat & overhead.... > > static inline void pci_dma_sglist_init(QEMUSGList *qsg, PCIDevice *dev, > > diff --git a/qemu-common.h b/qemu-common.h > > index 8f87e41..80026af 100644 > > --- a/qemu-common.h > > +++ b/qemu-common.h > > @@ -264,6 +264,7 @@ typedef struct EventNotifier EventNotifier; > > typedef struct VirtIODevice VirtIODevice; > > typedef struct QEMUSGList QEMUSGList; > > typedef struct SHPCDevice SHPCDevice; > > +typedef struct DMAContext DMAContext; > > Please don't put this in qemu-common.h. Stick it in a dma-specific header. Hrm, the followup ISA DMA patches from Jason Baron seem to have some cleanups based on the fact that this is in qemu-common.h :-) The other typedef's in there don't seem to have any more reason to be there either to be honest. I can try to move it, I don't care much :-) dma.h sounds like the right place ? Cheers, Ben.
On 06/20/2012 04:32 PM, Michael S. Tsirkin wrote: > On Wed, Jun 20, 2012 at 04:16:47PM -0500, Anthony Liguori wrote: >>> diff --git a/hw/pci.h b/hw/pci.h >>> index 7f223c0..ee669d9 100644 >>> --- a/hw/pci.h >>> +++ b/hw/pci.h >>> @@ -558,10 +558,16 @@ static inline uint32_t pci_config_size(const PCIDevice *d) >>> } >>> >>> /* DMA access functions */ >>> +static inline DMAContext *pci_dma_context(PCIDevice *dev) >>> +{ >>> + /* Stub for when we have no PCI iommu support */ >>> + return NULL; >>> +} >> >> Why is all of this stuff static inline? > > Let's face it, most people don't need an MMU in their VM. > inline stubs help make double sure we are not adding > overhead for the sake of this niche case. It also makes for an overly complex pci.h with no obvious performance justification. Let's not prematurely optimize here. Regards, Anthony Liguori >
On Wed, Jun 20, 2012 at 04:16:47PM -0500, Anthony Liguori wrote: > >diff --git a/qemu-common.h b/qemu-common.h > >index 8f87e41..80026af 100644 > >--- a/qemu-common.h > >+++ b/qemu-common.h > >@@ -264,6 +264,7 @@ typedef struct EventNotifier EventNotifier; > > typedef struct VirtIODevice VirtIODevice; > > typedef struct QEMUSGList QEMUSGList; > > typedef struct SHPCDevice SHPCDevice; > >+typedef struct DMAContext DMAContext; > > Please don't put this in qemu-common.h. Stick it in a dma-specific header. Weird. The point of typedefs in qemu-common.h is so people can use type pointer *without pulling in the relevant header*. If we put a typedef in specific header it defeats the purpose. It used to even say this somewhere so I don't remember where.
On Wed, Jun 20, 2012 at 04:38:30PM -0500, Anthony Liguori wrote: > On 06/20/2012 04:32 PM, Michael S. Tsirkin wrote: > >On Wed, Jun 20, 2012 at 04:16:47PM -0500, Anthony Liguori wrote: > >>>diff --git a/hw/pci.h b/hw/pci.h > >>>index 7f223c0..ee669d9 100644 > >>>--- a/hw/pci.h > >>>+++ b/hw/pci.h > >>>@@ -558,10 +558,16 @@ static inline uint32_t pci_config_size(const PCIDevice *d) > >>> } > >>> > >>> /* DMA access functions */ > >>>+static inline DMAContext *pci_dma_context(PCIDevice *dev) > >>>+{ > >>>+ /* Stub for when we have no PCI iommu support */ > >>>+ return NULL; > >>>+} > >> > >>Why is all of this stuff static inline? > > > >Let's face it, most people don't need an MMU in their VM. > >inline stubs help make double sure we are not adding > >overhead for the sake of this niche case. > > It also makes for an overly complex pci.h with no obvious performance justification. > A stub in a header plus an offline empty function is even more useless code. inline stubs is standard procedure. > Let's not prematurely optimize here. > > Regards, > > Anthony Liguori It's not just an optimization. It is easier to see what's going on this way.
On 06/20/2012 04:42 PM, Michael S. Tsirkin wrote: > On Wed, Jun 20, 2012 at 04:38:30PM -0500, Anthony Liguori wrote: >> On 06/20/2012 04:32 PM, Michael S. Tsirkin wrote: >>> On Wed, Jun 20, 2012 at 04:16:47PM -0500, Anthony Liguori wrote: >>>>> diff --git a/hw/pci.h b/hw/pci.h >>>>> index 7f223c0..ee669d9 100644 >>>>> --- a/hw/pci.h >>>>> +++ b/hw/pci.h >>>>> @@ -558,10 +558,16 @@ static inline uint32_t pci_config_size(const PCIDevice *d) >>>>> } >>>>> >>>>> /* DMA access functions */ >>>>> +static inline DMAContext *pci_dma_context(PCIDevice *dev) >>>>> +{ >>>>> + /* Stub for when we have no PCI iommu support */ >>>>> + return NULL; >>>>> +} >>>> >>>> Why is all of this stuff static inline? >>> >>> Let's face it, most people don't need an MMU in their VM. >>> inline stubs help make double sure we are not adding >>> overhead for the sake of this niche case. >> >> It also makes for an overly complex pci.h with no obvious performance justification. >> > A stub in a header plus an offline empty function is even more useless > code. inline stubs is standard procedure. Look at 8/13. They don't stay stubs for long. Regards, Anthony Liguori > >> Let's not prematurely optimize here. >> >> Regards, >> >> Anthony Liguori > > It's not just an optimization. It is easier to see what's going on this > way. >
On Wed, Jun 20, 2012 at 04:46:49PM -0500, Anthony Liguori wrote: > On 06/20/2012 04:42 PM, Michael S. Tsirkin wrote: > >On Wed, Jun 20, 2012 at 04:38:30PM -0500, Anthony Liguori wrote: > >>On 06/20/2012 04:32 PM, Michael S. Tsirkin wrote: > >>>On Wed, Jun 20, 2012 at 04:16:47PM -0500, Anthony Liguori wrote: > >>>>>diff --git a/hw/pci.h b/hw/pci.h > >>>>>index 7f223c0..ee669d9 100644 > >>>>>--- a/hw/pci.h > >>>>>+++ b/hw/pci.h > >>>>>@@ -558,10 +558,16 @@ static inline uint32_t pci_config_size(const PCIDevice *d) > >>>>> } > >>>>> > >>>>> /* DMA access functions */ > >>>>>+static inline DMAContext *pci_dma_context(PCIDevice *dev) > >>>>>+{ > >>>>>+ /* Stub for when we have no PCI iommu support */ > >>>>>+ return NULL; > >>>>>+} > >>>> > >>>>Why is all of this stuff static inline? > >>> > >>>Let's face it, most people don't need an MMU in their VM. > >>>inline stubs help make double sure we are not adding > >>>overhead for the sake of this niche case. > >> > >>It also makes for an overly complex pci.h with no obvious performance justification. > >> > >A stub in a header plus an offline empty function is even more useless > >code. inline stubs is standard procedure. > > Look at 8/13. They don't stay stubs for long. That does ont seem to touch pci.h? inlines in dma.h make sense too: a small inline wrapper that selects between the iommu/non iommu variant and an offline implementation for the iommu one. > Regards, > > Anthony Liguori > > > > >>Let's not prematurely optimize here. > >> > >>Regards, > >> > >>Anthony Liguori > > > >It's not just an optimization. It is easier to see what's going on this > >way. > >
On 06/20/2012 04:40 PM, Michael S. Tsirkin wrote: > On Wed, Jun 20, 2012 at 04:16:47PM -0500, Anthony Liguori wrote: >>> diff --git a/qemu-common.h b/qemu-common.h >>> index 8f87e41..80026af 100644 >>> --- a/qemu-common.h >>> +++ b/qemu-common.h >>> @@ -264,6 +264,7 @@ typedef struct EventNotifier EventNotifier; >>> typedef struct VirtIODevice VirtIODevice; >>> typedef struct QEMUSGList QEMUSGList; >>> typedef struct SHPCDevice SHPCDevice; >>> +typedef struct DMAContext DMAContext; >> >> Please don't put this in qemu-common.h. Stick it in a dma-specific header. > > Weird. > > The point of typedefs in qemu-common.h is so people can > use type pointer *without pulling in the relevant header*. You're providing a back explanation to something that was completely unrelated... qemu-common.h was created because everything (literally everything) was in a single vl.h. So qemu-common.h was simply the left over crap from vl.h that didn't have a home elsewhere. It was never intended that we'd keep adding more stuff to qemu-common.h. Regards, Anthony Liguori > If we put a typedef in specific header it defeats the purpose. > > It used to even say this somewhere so I don't remember where. >
On Wed, Jun 20, 2012 at 04:16:47PM -0500, Anthony Liguori wrote: [snip] > >diff --git a/qemu-common.h b/qemu-common.h > >index 8f87e41..80026af 100644 > >--- a/qemu-common.h > >+++ b/qemu-common.h > >@@ -264,6 +264,7 @@ typedef struct EventNotifier EventNotifier; > > typedef struct VirtIODevice VirtIODevice; > > typedef struct QEMUSGList QEMUSGList; > > typedef struct SHPCDevice SHPCDevice; > >+typedef struct DMAContext DMAContext; > > Please don't put this in qemu-common.h. Stick it in a dma-specific > header. I'm pretty sure I started to hit circular include hell without the forward declaration here.
On Wed, 2012-06-20 at 16:16 -0500, Anthony Liguori wrote: > > diff --git a/qemu-common.h b/qemu-common.h > > index 8f87e41..80026af 100644 > > --- a/qemu-common.h > > +++ b/qemu-common.h > > @@ -264,6 +264,7 @@ typedef struct EventNotifier EventNotifier; > > typedef struct VirtIODevice VirtIODevice; > > typedef struct QEMUSGList QEMUSGList; > > typedef struct SHPCDevice SHPCDevice; > > +typedef struct DMAContext DMAContext; > > Please don't put this in qemu-common.h. Stick it in a dma-specific > header. Ok so I just removed it from qemu-common.h (it's already in dma.h). It causes a minor breakage in spapr which is easily fixed by adding the right include. I'm building all the targets now and .... it seems to pass. So it's gone. That does mean that Jason will probably have to change something to his patches though. Cheers, Ben.
diff --git a/dma.h b/dma.h index fe08b72..4449a0c 100644 --- a/dma.h +++ b/dma.h @@ -34,6 +34,106 @@ typedef target_phys_addr_t dma_addr_t; #define DMA_ADDR_BITS TARGET_PHYS_ADDR_BITS #define DMA_ADDR_FMT TARGET_FMT_plx +/* Checks that the given range of addresses is valid for DMA. This is + * useful for certain cases, but usually you should just use + * dma_memory_{read,write}() and check for errors */ +static inline bool dma_memory_valid(DMAContext *dma, dma_addr_t addr, + dma_addr_t len, DMADirection dir) +{ + /* Stub version, with no iommu we assume all bus addresses are valid */ + return true; +} + +static inline int dma_memory_rw(DMAContext *dma, dma_addr_t addr, + void *buf, dma_addr_t len, DMADirection dir) +{ + /* Stub version when we have no iommu support */ + cpu_physical_memory_rw(addr, buf, (target_phys_addr_t)len, + dir == DMA_DIRECTION_FROM_DEVICE); + return 0; +} + +static inline int dma_memory_read(DMAContext *dma, dma_addr_t addr, + void *buf, dma_addr_t len) +{ + return dma_memory_rw(dma, addr, buf, len, DMA_DIRECTION_TO_DEVICE); +} + +static inline int dma_memory_write(DMAContext *dma, dma_addr_t addr, + const void *buf, dma_addr_t len) +{ + return dma_memory_rw(dma, addr, (void *)buf, len, + DMA_DIRECTION_FROM_DEVICE); +} + +static inline int dma_memory_set(DMAContext *dma, dma_addr_t addr, + uint8_t c, dma_addr_t len) +{ + /* Stub version when we have no iommu support */ + cpu_physical_memory_set(addr, c, len); + return 0; +} + +static inline void *dma_memory_map(DMAContext *dma, + dma_addr_t addr, dma_addr_t *len, + DMADirection dir) +{ + target_phys_addr_t xlen = *len; + void *p; + + p = cpu_physical_memory_map(addr, &xlen, + dir == DMA_DIRECTION_FROM_DEVICE); + *len = xlen; + return p; +} + +static inline void dma_memory_unmap(DMAContext *dma, + void *buffer, dma_addr_t len, + DMADirection dir, dma_addr_t access_len) +{ + return cpu_physical_memory_unmap(buffer, (target_phys_addr_t)len, + dir == DMA_DIRECTION_FROM_DEVICE, + access_len); +} + +#define DEFINE_LDST_DMA(_lname, _sname, _bits, _end) \ + static inline uint##_bits##_t ld##_lname##_##_end##_dma(DMAContext *dma, \ + dma_addr_t addr) \ + { \ + uint##_bits##_t val; \ + dma_memory_read(dma, addr, &val, (_bits) / 8); \ + return _end##_bits##_to_cpu(val); \ + } \ + static inline void st##_sname##_##_end##_dma(DMAContext *dma, \ + dma_addr_t addr, \ + uint##_bits##_t val) \ + { \ + val = cpu_to_##_end##_bits(val); \ + dma_memory_write(dma, addr, &val, (_bits) / 8); \ + } + +static inline uint8_t ldub_dma(DMAContext *dma, dma_addr_t addr) +{ + uint8_t val; + + dma_memory_read(dma, addr, &val, 1); + return val; +} + +static inline void stb_dma(DMAContext *dma, dma_addr_t addr, uint8_t val) +{ + dma_memory_write(dma, addr, &val, 1); +} + +DEFINE_LDST_DMA(uw, w, 16, le); +DEFINE_LDST_DMA(l, l, 32, le); +DEFINE_LDST_DMA(q, q, 64, le); +DEFINE_LDST_DMA(uw, w, 16, be); +DEFINE_LDST_DMA(l, l, 32, be); +DEFINE_LDST_DMA(q, q, 64, be); + +#undef DEFINE_LDST_DMA + struct ScatterGatherEntry { dma_addr_t base; dma_addr_t len; diff --git a/hw/pci.h b/hw/pci.h index 7f223c0..ee669d9 100644 --- a/hw/pci.h +++ b/hw/pci.h @@ -558,10 +558,16 @@ static inline uint32_t pci_config_size(const PCIDevice *d) } /* DMA access functions */ +static inline DMAContext *pci_dma_context(PCIDevice *dev) +{ + /* Stub for when we have no PCI iommu support */ + return NULL; +} + static inline int pci_dma_rw(PCIDevice *dev, dma_addr_t addr, void *buf, dma_addr_t len, DMADirection dir) { - cpu_physical_memory_rw(addr, buf, len, dir == DMA_DIRECTION_FROM_DEVICE); + dma_memory_rw(pci_dma_context(dev), addr, buf, len, dir); return 0; } @@ -581,12 +587,12 @@ static inline int pci_dma_write(PCIDevice *dev, dma_addr_t addr, static inline uint##_bits##_t ld##_l##_pci_dma(PCIDevice *dev, \ dma_addr_t addr) \ { \ - return ld##_l##_phys(addr); \ + return ld##_l##_dma(pci_dma_context(dev), addr); \ } \ static inline void st##_s##_pci_dma(PCIDevice *dev, \ - dma_addr_t addr, uint##_bits##_t val) \ + dma_addr_t addr, uint##_bits##_t val) \ { \ - st##_s##_phys(addr, val); \ + st##_s##_dma(pci_dma_context(dev), addr, val); \ } PCI_DMA_DEFINE_LDST(ub, b, 8); @@ -602,19 +608,16 @@ PCI_DMA_DEFINE_LDST(q_be, q_be, 64); static inline void *pci_dma_map(PCIDevice *dev, dma_addr_t addr, dma_addr_t *plen, DMADirection dir) { - target_phys_addr_t len = *plen; void *buf; - buf = cpu_physical_memory_map(addr, &len, dir == DMA_DIRECTION_FROM_DEVICE); - *plen = len; + buf = dma_memory_map(pci_dma_context(dev), addr, plen, dir); return buf; } static inline void pci_dma_unmap(PCIDevice *dev, void *buffer, dma_addr_t len, DMADirection dir, dma_addr_t access_len) { - cpu_physical_memory_unmap(buffer, len, dir == DMA_DIRECTION_FROM_DEVICE, - access_len); + dma_memory_unmap(pci_dma_context(dev), buffer, len, dir, access_len); } static inline void pci_dma_sglist_init(QEMUSGList *qsg, PCIDevice *dev, diff --git a/qemu-common.h b/qemu-common.h index 8f87e41..80026af 100644 --- a/qemu-common.h +++ b/qemu-common.h @@ -264,6 +264,7 @@ typedef struct EventNotifier EventNotifier; typedef struct VirtIODevice VirtIODevice; typedef struct QEMUSGList QEMUSGList; typedef struct SHPCDevice SHPCDevice; +typedef struct DMAContext DMAContext; typedef uint64_t pcibus_t;