diff mbox

[V2] GPMI-NAND: Define ecc.strength

Message ID 1337633967-8387-1-git-send-email-marex@denx.de
State Accepted
Commit 5636ce0f070dee85c1b1203fe436a89648d25d06
Headers show

Commit Message

Marek Vasut May 21, 2012, 8:59 p.m. UTC 
The ecc.strength wasn't set, resulting in the following crash:
[    2.550000] kernel BUG at drivers/mtd/nand/nand_base.c:3347!
[    2.550000] Internal error: Oops - BUG: 0 [#1] ARM
[    2.550000] Modules linked in:
[    2.550000] CPU: 0    Not tainted  (3.4.0-rc7-next-20120518-dirty #1211)
[    2.550000] PC is at nand_scan_tail+0x328/0x650
[    2.550000] LR is at nand_scan_tail+0x328/0x650
[    2.550000] pc : [<c020841c>]    lr : [<c020841c>]    psr: 20000013
[    2.550000] sp : c7443ea8  ip : c7448000  fp : c043dc70
[    2.550000] r10: 00000000  r9 : c059dd20  r8 : c7526300
[    2.550000] r7 : 00000001  r6 : c7479c08  r5 : c7526300  r4 : c7526098
[    2.550000] r3 : c7448000  r2 : 00000000  r1 : 00000001  r0 : 00000034
[    2.550000] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    2.550000] Control: 0005317f  Table: 40004000  DAC: 00000017
[    2.550000] Process swapper (pid: 1, stack limit = 0xc7442270)
[    2.550000] Stack: (0xc7443ea8 to 0xc7444000)
[    2.550000] 3ea0:                   c7526000 00000000 c7479c08 c02f68e0 c03d50ec c7526000
[    2.550000] 3ec0: c747c6e0 00000000 c0ae7720 00000004 00000000 00000000 c7479c08 c0ae7720
[    2.550000] 3ee0: c7479c3c c0593e20 c7572200 c01f6618 c01f6604 c01f55b0 c7479c08 c0593e20
[    2.550000] 3f00: c7479c3c c059dd20 c7572200 c01f57cc 00000000 c0593e20 c01f5738 c01f3d40
[    2.550000] 3f20: c74038a8 c74767d0 c0593e20 c04475ec c05901b8 c01f4e18 c03d50e0 c019d438
[    2.550000] 3f40: c7403800 c0593e20 c04475ec 00000000 c059dd20 c04475f8 c7442000 c01f5a70
[    2.550000] 3f60: 00000000 c044e98c c04475ec 00000000 c059dd20 c04475f8 c7442000 c043dc7c
[    2.550000] 3f80: c044e98c c0008824 c03d6c30 c040c4e4 00000006 00000006 c03b0ce4 c0bf54e0
[    2.550000] 3fa0: c044e98c c04475ec 00000006 c04475f8 0000004c c042a21c 00000000 c042a8b8
[    2.550000] 3fc0: 00000006 00000006 c042a21c 00000000 00000000 00000000 00000000 c042a7bc
[    2.550000] 3fe0: c000fab4 00000013 00000000 00000000 00000000 c000fab4 efbbfaa5 eaeafefe
[    2.550000] [<c020841c>] (nand_scan_tail+0x328/0x650) from [<c02f68e0>] (gpmi_nand_probe+0x43c/0x5a4)
[    2.550000] [<c02f68e0>] (gpmi_nand_probe+0x43c/0x5a4) from [<c01f6618>] (platform_drv_probe+0x14/0x18)
[    2.550000] [<c01f6618>] (platform_drv_probe+0x14/0x18) from [<c01f55b0>] (driver_probe_device+0x74/0x1fc)
[    2.550000] [<c01f55b0>] (driver_probe_device+0x74/0x1fc) from [<c01f57cc>] (__driver_attach+0x94/0x98)
[    2.550000] [<c01f57cc>] (__driver_attach+0x94/0x98) from [<c01f3d40>] (bus_for_each_dev+0x50/0x80)
[    2.550000] [<c01f3d40>] (bus_for_each_dev+0x50/0x80) from [<c01f4e18>] (bus_add_driver+0x188/0x25c)
[    2.550000] [<c01f4e18>] (bus_add_driver+0x188/0x25c) from [<c01f5a70>] (driver_register+0x78/0x138)
[    2.550000] [<c01f5a70>] (driver_register+0x78/0x138) from [<c043dc7c>] (gpmi_nand_init+0xc/0x30)
[    2.550000] [<c043dc7c>] (gpmi_nand_init+0xc/0x30) from [<c0008824>] (do_one_initcall+0x108/0x17c)
[    2.550000] [<c0008824>] (do_one_initcall+0x108/0x17c) from [<c042a8b8>] (kernel_init+0xfc/0x1bc)
[    2.550000] [<c042a8b8>] (kernel_init+0xfc/0x1bc) from [<c000fab4>] (kernel_thread_exit+0x0/0x8)
[    2.550000] Code: e3530000 1affff76 e59f02d0 eb03c16a (e7f001f2)
[    2.830000] ---[ end trace 3f05d4c0039432f1 ]---
[    2.840000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Huang Shijie <b32955@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: linux-mtd@lists.infradead.org
Cc: Artem Bityutskiy <dedekind1@gmail.com>

---
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c |    5 +++++
 1 file changed, 5 insertions(+)

V2: Also configure mtd.ecc_strength

Comments

Huang Shijie May 22, 2012, 2:12 a.m. UTC | #1 
于 2012年05月22日 04:59, Marek Vasut 写道:
> The ecc.strength wasn't set, resulting in the following crash:
> [    2.550000] kernel BUG at drivers/mtd/nand/nand_base.c:3347!
> [    2.550000] Internal error: Oops - BUG: 0 [#1] ARM
> [    2.550000] Modules linked in:
> [    2.550000] CPU: 0    Not tainted  (3.4.0-rc7-next-20120518-dirty #1211)
> [    2.550000] PC is at nand_scan_tail+0x328/0x650
> [    2.550000] LR is at nand_scan_tail+0x328/0x650
> [    2.550000] pc : [<c020841c>]    lr : [<c020841c>]    psr: 20000013
> [    2.550000] sp : c7443ea8  ip : c7448000  fp : c043dc70
> [    2.550000] r10: 00000000  r9 : c059dd20  r8 : c7526300
> [    2.550000] r7 : 00000001  r6 : c7479c08  r5 : c7526300  r4 : c7526098
> [    2.550000] r3 : c7448000  r2 : 00000000  r1 : 00000001  r0 : 00000034
> [    2.550000] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
> [    2.550000] Control: 0005317f  Table: 40004000  DAC: 00000017
> [    2.550000] Process swapper (pid: 1, stack limit = 0xc7442270)
> [    2.550000] Stack: (0xc7443ea8 to 0xc7444000)
> [    2.550000] 3ea0:                   c7526000 00000000 c7479c08 c02f68e0 c03d50ec c7526000
> [    2.550000] 3ec0: c747c6e0 00000000 c0ae7720 00000004 00000000 00000000 c7479c08 c0ae7720
> [    2.550000] 3ee0: c7479c3c c0593e20 c7572200 c01f6618 c01f6604 c01f55b0 c7479c08 c0593e20
> [    2.550000] 3f00: c7479c3c c059dd20 c7572200 c01f57cc 00000000 c0593e20 c01f5738 c01f3d40
> [    2.550000] 3f20: c74038a8 c74767d0 c0593e20 c04475ec c05901b8 c01f4e18 c03d50e0 c019d438
> [    2.550000] 3f40: c7403800 c0593e20 c04475ec 00000000 c059dd20 c04475f8 c7442000 c01f5a70
> [    2.550000] 3f60: 00000000 c044e98c c04475ec 00000000 c059dd20 c04475f8 c7442000 c043dc7c
> [    2.550000] 3f80: c044e98c c0008824 c03d6c30 c040c4e4 00000006 00000006 c03b0ce4 c0bf54e0
> [    2.550000] 3fa0: c044e98c c04475ec 00000006 c04475f8 0000004c c042a21c 00000000 c042a8b8
> [    2.550000] 3fc0: 00000006 00000006 c042a21c 00000000 00000000 00000000 00000000 c042a7bc
> [    2.550000] 3fe0: c000fab4 00000013 00000000 00000000 00000000 c000fab4 efbbfaa5 eaeafefe
> [    2.550000] [<c020841c>] (nand_scan_tail+0x328/0x650) from [<c02f68e0>] (gpmi_nand_probe+0x43c/0x5a4)
> [    2.550000] [<c02f68e0>] (gpmi_nand_probe+0x43c/0x5a4) from [<c01f6618>] (platform_drv_probe+0x14/0x18)
> [    2.550000] [<c01f6618>] (platform_drv_probe+0x14/0x18) from [<c01f55b0>] (driver_probe_device+0x74/0x1fc)
> [    2.550000] [<c01f55b0>] (driver_probe_device+0x74/0x1fc) from [<c01f57cc>] (__driver_attach+0x94/0x98)
> [    2.550000] [<c01f57cc>] (__driver_attach+0x94/0x98) from [<c01f3d40>] (bus_for_each_dev+0x50/0x80)
> [    2.550000] [<c01f3d40>] (bus_for_each_dev+0x50/0x80) from [<c01f4e18>] (bus_add_driver+0x188/0x25c)
> [    2.550000] [<c01f4e18>] (bus_add_driver+0x188/0x25c) from [<c01f5a70>] (driver_register+0x78/0x138)
> [    2.550000] [<c01f5a70>] (driver_register+0x78/0x138) from [<c043dc7c>] (gpmi_nand_init+0xc/0x30)
> [    2.550000] [<c043dc7c>] (gpmi_nand_init+0xc/0x30) from [<c0008824>] (do_one_initcall+0x108/0x17c)
> [    2.550000] [<c0008824>] (do_one_initcall+0x108/0x17c) from [<c042a8b8>] (kernel_init+0xfc/0x1bc)
> [    2.550000] [<c042a8b8>] (kernel_init+0xfc/0x1bc) from [<c000fab4>] (kernel_thread_exit+0x0/0x8)
> [    2.550000] Code: e3530000 1affff76 e59f02d0 eb03c16a (e7f001f2)
> [    2.830000] ---[ end trace 3f05d4c0039432f1 ]---
> [    2.840000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Huang Shijie <b32955@freescale.com>
> Cc: Shawn Guo <shawn.guo@linaro.org>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: linux-mtd@lists.infradead.org
> Cc: Artem Bityutskiy <dedekind1@gmail.com>
>
> ---
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c |    5 +++++
>  1 file changed, 5 insertions(+)
>
> V2: Also configure mtd.ecc_strength
>
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index 303e9848..d5e9f8b 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -1436,6 +1436,10 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data  *this)
>  	if (ret)
>  		return ret;
>  
> +	/* Adjust the ECC strength according to the chip. */
> +	this->nand.ecc.strength = this->bch_geometry.ecc_strength;
> +	this->mtd.ecc_strength = this->bch_geometry.ecc_strength;
> +
>  	/* NAND boot init, depends on the gpmi_set_geometry(). */
>  	return nand_boot_init(this);
>  }
> @@ -1494,6 +1498,7 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
>  	chip->options		|= NAND_NO_SUBPAGE_WRITE;
>  	chip->ecc.mode		= NAND_ECC_HW;
>  	chip->ecc.size		= 1;
> +	chip->ecc.strength	= 8;
>  	chip->ecc.layout	= &gpmi_hw_ecclayout;
>  
>  	/* Allocate a temporary DMA buffer for reading ID in the nand_scan() */
Acked-by: Huang Shijie <b32955@freescale.com>
Artem Bityutskiy May 22, 2012, 6:33 a.m. UTC | #2 
On Mon, 2012-05-21 at 22:59 +0200, Marek Vasut wrote:
> The ecc.strength wasn't set, resulting in the following crash:
> [    2.550000] kernel BUG at drivers/mtd/nand/nand_base.c:3347!
> [    2.550000] Internal error: Oops - BUG: 0 [#1] ARM

Pushed to l2-mtd.git, thanks!
Marek Vasut May 22, 2012, 6:34 a.m. UTC | #3 
Dear Artem Bityutskiy,

> On Mon, 2012-05-21 at 22:59 +0200, Marek Vasut wrote:
> > The ecc.strength wasn't set, resulting in the following crash:
> > [    2.550000] kernel BUG at drivers/mtd/nand/nand_base.c:3347!
> > [    2.550000] Internal error: Oops - BUG: 0 [#1] ARM
> 
> Pushed to l2-mtd.git, thanks!

Thank you!

Best regards,
Marek Vasut
Mike Dunn May 24, 2012, 3:46 p.m. UTC | #4 
On 05/21/2012 11:34 PM, Marek Vasut wrote:
> Dear Artem Bityutskiy,
> 
>> On Mon, 2012-05-21 at 22:59 +0200, Marek Vasut wrote:
>>> The ecc.strength wasn't set, resulting in the following crash:
>>> [    2.550000] kernel BUG at drivers/mtd/nand/nand_base.c:3347!
>>> [    2.550000] Internal error: Oops - BUG: 0 [#1] ARM
>>
>> Pushed to l2-mtd.git, thanks!
> 
> Thank you!


Yes, thanks much Marek.  I must have missed this one while doing the EUCLEAN
patches (maybe because it's in its own directory).  Sorry to everyone for the
confusion it caused.

Mike
Marek Vasut May 24, 2012, 9:27 p.m. UTC | #5 
Dear Mike Dunn,

> On 05/21/2012 11:34 PM, Marek Vasut wrote:
> > Dear Artem Bityutskiy,
> > 
> >> On Mon, 2012-05-21 at 22:59 +0200, Marek Vasut wrote:
> >>> The ecc.strength wasn't set, resulting in the following crash:
> >>> [    2.550000] kernel BUG at drivers/mtd/nand/nand_base.c:3347!
> >>> [    2.550000] Internal error: Oops - BUG: 0 [#1] ARM
> >> 
> >> Pushed to l2-mtd.git, thanks!
> > 
> > Thank you!
> 
> Yes, thanks much Marek.  I must have missed this one while doing the
> EUCLEAN patches (maybe because it's in its own directory).  Sorry to
> everyone for the confusion it caused.

Mike, nice to see you became more involved with the MTD :-) How's the DoCG3/G4 
thing turned out btw?

> Mike

Best regards,
Marek Vasut
diff mbox

Patch

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 303e9848..d5e9f8b 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1436,6 +1436,10 @@  static int gpmi_pre_bbt_scan(struct gpmi_nand_data  *this)
 	if (ret)
 		return ret;
 
+	/* Adjust the ECC strength according to the chip. */
+	this->nand.ecc.strength = this->bch_geometry.ecc_strength;
+	this->mtd.ecc_strength = this->bch_geometry.ecc_strength;
+
 	/* NAND boot init, depends on the gpmi_set_geometry(). */
 	return nand_boot_init(this);
 }
@@ -1494,6 +1498,7 @@  static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
 	chip->options		|= NAND_NO_SUBPAGE_WRITE;
 	chip->ecc.mode		= NAND_ECC_HW;
 	chip->ecc.size		= 1;
+	chip->ecc.strength	= 8;
 	chip->ecc.layout	= &gpmi_hw_ecclayout;
 
 	/* Allocate a temporary DMA buffer for reading ID in the nand_scan() */