Message ID | 4FB1FE52.6060404@aribaud.net |
---|---|
State | Accepted |
Delegated to: | Wolfgang Denk |
Headers | show |
Dear Albert ARIBAUD, In message <4FB1FE52.6060404@aribaud.net> you wrote: > Hi Wolfgang, > > The following changes since commit 0a6deb3251a68b5be640ab1b848ca67e906b75ce: > > Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging > (2012-04-30 18:19:28 +0200) > > are available in the git repository at: > > > git://git.denx.de/u-boot-arm master > > for you to fetch changes up to 2ca4a209a5b961ad1be8782c68dabe326d77dfaf: > > OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer > (2012-05-15 08:31:41 +0200) > > ---------------------------------------------------------------- > Aneesh V (6): > arm: adapt asm/linkage.h from Linux > armv7: add appropriate headers for assembly functions > ARM: enable Thumb build > armv7: Use -march=armv7-a and thereby enable Thumb-2 > omap4+: Avoid using __attribute__ ((__packed__)) > OMAP4: enable Thumb build > > Anton Staff (3): > fdt: Add fdtdec functions to read byte array > tegra: fdt: Add keyboard controller definition > tegra: fdt: Add keyboard definitions for Seaboard > > Balaji T K (3): > arm: omap5: correct boot device mode7 for eMMC > omap5: pbias ldo9 turn on > mmc: omap5evm: Add eMMC saveenv support > > Bernie Thompson (1): > input: Add support for keyboard matrix decoding from an fdt > > Chander Kashyap (1): > EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc > > David Purdy (1): > kirkwood: add support for Cloud Engines Pogoplug E02 > > Dirk Behme (1): > i.MX6: Add ANATOP regulator init > > Donghwa Lee (8): > EXYNOS: definitions of system resgister and power management > registers. > EXYNOS: add LCD and MIPI DSI clock interface. > LCD: add data structure for EXYNOS display driver > EXYNOS: support EXYNOS framebuffer and FIMD display drivers. > EXYNOS: support EXYNOS MIPI DSI interface driver. > LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI > EXYNOS: support TRATS board display function > EXYNOS: Change bits per pixel value proper for u-boot. > > Enric Balletbo i Serra (2): > igep00x0: enable the use of a plain text file > igep00x0: change mpurate from 500 to auto > > Enric Balletbò i Serra (1): > OMAP3: igep00x0: Reduce lines of code for IGEP-based boards. > > Eric Nelson (3): > i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow > i.MX6: add enable_sata_clock() > i.MX6: mx6q_sabrelite: add SATA bindings > > Fabio Estevam (19): > pmic: Add support for the Dialog DA9053 PMIC > mx6qsabrelite: No need to set the direction for GPIO3_23 again > mx28evk: Allow to booting a dt kernel > m28evk: Allow to booting a dt kernel > mx28evk: Allow booting a zImage kernel > mx6qsabrelite: Allow booting a zImage kernel > mx6qarm2: Allow booting a zImage kernel > mx31pdk: Allow booting a zImage kernel > imx-common: Factor out get_ahb_clk() > mx5: Add clock config interface > mx53loco: Allow to print CPU information at a later stage > mx53loco: Add support for 1GHz operation for DA9053-based boards > pmic: dialog: Avoid name conflicts > mx53loco: Add mc34708 support and set mx53 frequency at 1GHz > mx53loco: Turn on VUSB regulator > mx53loco: Add CONFIG_REVISION_TAG > mx53loco: Remove unneeded gpio_set_value() > spi: mxs: Introduce spi_cs_is_valid() > spi: mxs: Allow other chip selects to work > > Grazvydas Ignotas (3): > OMAP3: pandora: pin mux updates for DM3730 board variant > OMAP3: pandora: revise GPIO configuration > OMAP3: pandora: drop console kernel argument > > Ian Campbell (1): > ARM: dreamplug: Enable FDT support > > Jaehoon Chung (1): > TRATS: modify the trats's configuration > > Jimmy Zhang (3): > tegra: Add EMC support for optimal memory timings > tegra: Add PMU to manage power supplies > tegra: Add EMC settings for Seaboard > > Jon Hunter (1): > OMAP4: Set fdt_high for OMAP4 devices to enable booting with > Device Tree > > Jonathan Solnit (1): > ARM:OMAP+:MMC: Add parameters to MMC init > > Lauri Hintsala (1): > mx28evk: add NAND support > > Lucas Stach (1): > tegra2: trivially enable 13 mhz crystal frequency > > Luka Perkov (1): > kirkwood: add NAS62x0 board support > > Marek Vasut (17): > M28: Enable FDT support > Revert "i.MX28: Enable additional DRAM address bits" > M28: Scan only first 512 MB of DRAM to avoid memory wraparound > i.MX28: Add delay after CPU bypass is cleared > FEC: Abstract out register setup > M28EVK: Implement support for new board V2.0 > M28EVK: Add SD update command > i.MX28: Improve passing of data from SPL to U-Boot > i.MX28: Implement boot pads sampling and reporting > i.MX28: Add LCDIF register definitions > i.MX28: Shut down the LCD controller before reset > i.MX28: Add LRADC register definitions > i.MX28: Add LRADC init to i.MX28 SPL > i.MX28: Reorder battery status functions in SPL > i.MX28: Add battery boot components to SPL > i.MX28: Check if WP detection is implemented at all > i.MX28: Avoid redefining serial_put[cs]() > > Matt Porter (1): > arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx > > Minkyu Kang (1): > SMDK5250: fix compiler warning > > Nikita Kiryanov (1): > cm-t35: add I2C multi-bus support > > Nishanth Menon (3): > OMAP3+: Introduce generic logic for OMAP voltage controller > OMAP4460: TPS Ensure SET1 is selected after voltage configuration > OMAP4: scale voltage of core before MPU scales > > Nobuhiro Iwamatsu (2): > arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to > CONFIG_BOARD_LATE_INIT > arm: ea20: Change macro from BOARD_LATE_INIT to > CONFIG_BOARD_LATE_INIT > > Rakesh Iyer (1): > tegra: Add tegra keyboard driver > > SRICHARAN R (17): > OMAP5: clocks: Change clock settings as required for ES1.0 silicon. > OMAP5: board: Add pinmux data for omap5_evm board. > OMAP5: io: Configure the io settings for omap5430 sevm board. > OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon. > OMAP5: palmas: Configure nominal opp vdd values > OMAP5: hwinit: Add the missing break statement > OMAP4/5: Make the silicon revision variable common. > OMAP5: SRAM: Change the SRAM base address. > OMAP4/5: Make the sysctrl structure common > OMAP4/5: device: Add support to get the device type. > OMAP5: defconfig: Align the defconfig for 5430 ES1.0 > OMAP5: ddr: Change the ddr device name. > OMAP4/5: emif: Correct the emif power mgt shadow register bit fields. > power: twl6035: add palmas PMIC support > OMAP3+: reset: Create a common reset layer. > OMAP5: reset: Use cold reset in case of 5430ES1.0 > OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer > > Simon Glass (19): > fdt: Add function to locate an array in the device tree > fdt: Add function to return next compatible subnode > Add abs() macro to return absolute value > i2c: Add TPS6586X driver > tegra: Move ap20.h header into arch location > tegra: Add functions to access low-level Osc/PLL details > tegra: Add tegra_get_chip_type() to detect SKU > tegra: Add header file for APB_MISC register > tegra: Set up PMU for Nvidia boards > tegra: Set up warmboot code on Nvidia boards > fdt: tegra: Add EMC node to device tree > tegra: i2c: Add function to find DVC bus > tegra: fdt: Add EMC data for Tegra2 Seaboard > tegra: Enable LP0 on Seaboard > input: Add linux/input.h for key code support > input: Add generic keyboard input handler > tegra: Add keyboard support to funcmux > tegra: Switch on console mux and use environment for console > tegra: Enable keyboard for Seaboard > > Stefano Babic (9): > Define UART4 and UART5 base addresses > NET: fec_mxc.c: Add a way to disable auto negotiation > MX5: Add definitions for SATA controller > SATA: check for return value from sata functions > MX53: add function to set SATA clock to internal > SATA: add driver for MX5 / MX6 SOCs > MX53: Add support to ESG ima3 board > MX53: mx53loco: Add SATA support > MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged > > Tero Kristo (3): > omap4: panda: disable uart2 pads during boot > omap4: do not enable fs-usb module > omap4: do not enable auxiliary cores > > Timo Ketola (7): > i.MX25: esdhc: Add mxc_get_clock infrastructure > i.MX25: This architecture has a GPIO4 too > imx: nand: Support flash based BBT > i.MX25: usb: Set PORTSCx register > imx: usb: There is no such register > i.MX2: Include asm/types.h in arch-mx25/imx-regs.h > imx: Add u-boot.imx as target for ARM9 i.MX SOCs > > Tom Rini (11): > tools, config.mk: Add gcc-version.sh, cc-version test from Linux > Makefile: Add a 'checkthumb' rule > omap4: Remove CONFIG_SYS_MMC_SET_DEV > omap4+: Remove CONFIG_ARCH_CPU_INIT > omap5912osk: Remove empty misc_init_r > omap730p2: Remove empty misc_init_r > omap3: Introduce weak misc_init_r > include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF > include/configs: Remove CONFIG_SYS_64BIT_STRTOUL > ARM: omap3: Set SPL stack size to 8KB, image to 54KB. > ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT > > Vladimir Zapolskiy (3): > arm926ejs: add NXP LPC32x0 cpu series support > serial: add LPC32X0 high-speed UART devices support > devkit3250: add Timll DevKit3250 board initial support > > Wei Ni (1): > tegra: Turn off power detect in board init > > Wolfgang Grandegger (1): > USB: ehci-mx6: Fix broken IO access > > Yen Lin (5): > Add AES crypto library > tegra: Add crypto library for warmboot code > tegra: Add flow, gp_padctl, fuse, sdram headers > tegra: Add warmboot implementation > tegra: Setup PMC scratch info from ap20 setup > > Łukasz Majewski (3): > ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC > measurement > misc:pmic:max8997 MAX8997 support for PMIC driver > misc:pmic:samsung Convert TRATS target to use MAX8997 instead of > MAX8998 > > MAINTAINERS | 24 +- > Makefile | 7 + > README | 8 + > arch/arm/config.mk | 27 +- > arch/arm/cpu/arm926ejs/config.mk | 6 + > arch/arm/cpu/arm926ejs/lpc32xx/Makefile | 45 + > arch/arm/cpu/arm926ejs/lpc32xx/clk.c | 117 +++ > arch/arm/cpu/arm926ejs/lpc32xx/cpu.c | 70 ++ > arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 52 ++ > arch/arm/cpu/arm926ejs/lpc32xx/timer.c | 95 ++ > arch/arm/cpu/arm926ejs/mx25/generic.c | 27 + > arch/arm/cpu/arm926ejs/mx28/Makefile | 2 +- > arch/arm/cpu/arm926ejs/mx28/mx28.c | 29 +- > arch/arm/cpu/arm926ejs/mx28/mx28_init.h | 4 + > arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 57 ++ > arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c | 86 ++ > arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 14 +- > arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 224 +++-- > arch/arm/cpu/armv7/am33xx/board.c | 2 +- > arch/arm/cpu/armv7/config.mk | 7 +- > arch/arm/cpu/armv7/exynos/Makefile | 2 +- > arch/arm/cpu/armv7/exynos/clock.c | 184 ++++ > arch/arm/cpu/armv7/exynos/power.c | 54 ++ > arch/arm/cpu/armv7/exynos/system.c | 48 + > arch/arm/cpu/armv7/imx-common/cpu.c | 15 +- > arch/arm/cpu/armv7/mx5/clock.c | 493 +++++++++- > arch/arm/cpu/armv7/mx5/lowlevel_init.S | 5 +- > arch/arm/cpu/armv7/mx6/clock.c | 50 +- > arch/arm/cpu/armv7/mx6/lowlevel_init.S | 5 +- > arch/arm/cpu/armv7/mx6/soc.c | 30 + > arch/arm/cpu/armv7/omap-common/Makefile | 1 + > arch/arm/cpu/armv7/omap-common/clocks-common.c | 99 +- > arch/arm/cpu/armv7/omap-common/emif-common.c | 41 +- > arch/arm/cpu/armv7/omap-common/hwinit-common.c | 16 +- > arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 14 +- > .../arm/cpu/armv7/omap-common/{reset.S => reset.c} | 30 +- > arch/arm/cpu/armv7/omap-common/spl.c | 1 + > arch/arm/cpu/armv7/omap-common/spl_mmc.c | 5 +- > arch/arm/cpu/armv7/omap-common/vc.c | 138 +++ > arch/arm/cpu/armv7/omap3/board.c | 12 + > arch/arm/cpu/armv7/omap3/clock.c | 16 + > arch/arm/cpu/armv7/omap3/lowlevel_init.S | 41 +- > arch/arm/cpu/armv7/omap4/clocks.c | 85 +- > arch/arm/cpu/armv7/omap4/hwinit.c | 24 +- > arch/arm/cpu/armv7/omap4/sdram_elpida.c | 4 + > arch/arm/cpu/armv7/omap5/Makefile | 2 +- > arch/arm/cpu/armv7/omap5/clocks.c | 143 ++- > arch/arm/cpu/armv7/omap5/hwinit.c | 104 ++- > .../cpu/armv7/omap5/{sdram_elpida.c => sdram.c} | 101 +- > arch/arm/cpu/armv7/s5pc1xx/cache.S | 10 +- > arch/arm/cpu/armv7/s5pc1xx/reset.S | 5 +- > arch/arm/cpu/armv7/start.S | 13 +- > arch/arm/cpu/armv7/tegra2/Makefile | 4 + > arch/arm/cpu/armv7/tegra2/ap20.c | 44 +- > arch/arm/cpu/armv7/tegra2/board.c | 4 +- > arch/arm/cpu/armv7/tegra2/clock.c | 37 +- > arch/arm/cpu/armv7/tegra2/crypto.c | 230 +++++ > arch/arm/cpu/armv7/tegra2/crypto.h | 36 + > arch/arm/cpu/armv7/tegra2/emc.c | 286 ++++++ > arch/arm/cpu/armv7/tegra2/funcmux.c | 16 + > arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 5 +- > arch/arm/cpu/armv7/tegra2/pmu.c | 70 ++ > arch/arm/cpu/armv7/tegra2/warmboot.c | 386 ++++++++ > arch/arm/cpu/armv7/tegra2/warmboot_avp.c | 250 +++++ > arch/arm/cpu/armv7/tegra2/warmboot_avp.h | 81 ++ > arch/arm/cpu/armv7/u8500/lowlevel.S | 9 +- > arch/arm/dts/tegra20.dtsi | 11 + > arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 2 +- > arch/arm/include/asm/arch-exynos/clk.h | 3 + > arch/arm/include/asm/arch-exynos/cpu.h | 5 + > arch/arm/include/asm/arch-exynos/dsim.h | 181 ++++ > arch/arm/include/asm/arch-exynos/fb.h | 446 +++++++++ > arch/arm/include/asm/arch-exynos/mipi_dsim.h | 380 ++++++++ > arch/arm/include/asm/arch-exynos/power.h | 6 + > arch/arm/include/asm/arch-exynos/system.h | 53 ++ > arch/arm/include/asm/arch-exynos/tzpc.h | 2 +- > arch/arm/include/asm/arch-lpc32xx/clk.h | 170 ++++ > arch/arm/include/asm/arch-lpc32xx/config.h | 76 ++ > arch/arm/include/asm/arch-lpc32xx/cpu.h | 64 ++ > arch/arm/include/asm/arch-lpc32xx/emc.h | 92 ++ > arch/arm/include/asm/arch-lpc32xx/sys_proto.h | 25 + > arch/arm/include/asm/arch-lpc32xx/timer.h | 74 ++ > arch/arm/include/asm/arch-lpc32xx/uart.h | 114 +++ > arch/arm/include/asm/arch-lpc32xx/wdt.h | 51 ++ > arch/arm/include/asm/arch-mx25/clock.h | 23 + > arch/arm/include/asm/arch-mx25/imx-regs.h | 3 + > arch/arm/include/asm/arch-mx28/imx-regs.h | 2 + > arch/arm/include/asm/arch-mx28/regs-lcdif.h | 212 +++++ > arch/arm/include/asm/arch-mx28/regs-lradc.h | 400 ++++++++ > arch/arm/include/asm/arch-mx28/sys_proto.h | 30 + > arch/arm/include/asm/arch-mx5/clock.h | 7 +- > arch/arm/include/asm/arch-mx5/crm_regs.h | 6 + > arch/arm/include/asm/arch-mx5/imx-regs.h | 11 + > arch/arm/include/asm/arch-mx5/iomux.h | 4 +- > arch/arm/include/asm/arch-mx5/sys_proto.h | 3 + > arch/arm/include/asm/arch-mx6/clock.h | 1 + > .../asm/arch-mx6/{ccm_regs.h => crm_regs.h} | 2 +- > arch/arm/include/asm/arch-mx6/imx-regs.h | 9 + > arch/arm/include/asm/arch-mx6/iomux-v3.h | 111 +++ > arch/arm/include/asm/arch-mx6/sys_proto.h | 5 +- > arch/arm/include/asm/arch-omap3/cpu.h | 5 +- > arch/arm/include/asm/arch-omap3/mmc_host_def.h | 8 +- > arch/arm/include/asm/arch-omap3/mux.h | 6 + > arch/arm/include/asm/arch-omap4/clocks.h | 18 +- > arch/arm/include/asm/arch-omap4/cpu.h | 11 + > arch/arm/include/asm/arch-omap4/mmc_host_def.h | 2 +- > arch/arm/include/asm/arch-omap4/mux_omap4.h | 2 +- > arch/arm/include/asm/arch-omap4/omap.h | 25 +- > arch/arm/include/asm/arch-omap4/sys_proto.h | 8 +- > arch/arm/include/asm/arch-omap5/clocks.h | 52 +- > arch/arm/include/asm/arch-omap5/cpu.h | 11 + > arch/arm/include/asm/arch-omap5/mmc_host_def.h | 2 +- > arch/arm/include/asm/arch-omap5/mux_omap5.h | 504 +++++----- > arch/arm/include/asm/arch-omap5/omap.h | 153 +++- > arch/arm/include/asm/arch-omap5/sys_proto.h | 8 +- > .../tegra2 => include/asm/arch-tegra2}/ap20.h | 7 + > arch/arm/include/asm/arch-tegra2/apb_misc.h | 36 + > arch/arm/include/asm/arch-tegra2/clk_rst.h | 3 + > arch/arm/include/asm/arch-tegra2/clock.h | 22 + > arch/arm/include/asm/arch-tegra2/emc.h | 113 +++ > arch/arm/include/asm/arch-tegra2/flow.h | 36 + > arch/arm/include/asm/arch-tegra2/fuse.h | 39 + > arch/arm/include/asm/arch-tegra2/gp_padctrl.h | 73 ++ > arch/arm/include/asm/arch-tegra2/pmu.h | 30 + > arch/arm/include/asm/arch-tegra2/sdram_param.h | 148 +++ > arch/arm/include/asm/arch-tegra2/tegra2.h | 25 + > arch/arm/include/asm/arch-tegra2/tegra_i2c.h | 7 + > arch/arm/include/asm/arch-tegra2/warmboot.h | 150 +++ > arch/arm/include/asm/emif.h | 76 +- > arch/arm/include/asm/linkage.h | 7 + > arch/arm/include/asm/omap_common.h | 11 +- > board/cloudengines/pogo_e02/Makefile | 43 + > board/cloudengines/pogo_e02/kwbimage.cfg | 169 ++++ > board/cloudengines/pogo_e02/pogo_e02.c | 118 +++ > board/cloudengines/pogo_e02/pogo_e02.h | 44 + > board/cm_t35/cm_t35.c | 19 +- > board/comelit/dig297/dig297.c | 2 +- > board/corscience/tricorder/tricorder.c | 2 +- > board/davinci/ea20/ea20.c | 4 +- > board/denx/m28evk/m28evk.c | 20 +- > board/denx/m28evk/spl_boot.c | 8 +- > board/esg/ima3-mx53/Makefile | 41 + > board/esg/ima3-mx53/ima3-mx53.c | 302 ++++++ > board/esg/ima3-mx53/imximage.cfg | 108 +++ > board/freescale/mx28evk/iomux.c | 21 + > board/freescale/mx53loco/mx53loco.c | 146 ++- > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 155 +++- > board/htkw/mcx/mcx.c | 13 +- > board/isee/igep0020/igep0020.c | 4 +- > board/isee/igep0030/igep0030.c | 4 +- > board/logicpd/am3517evm/am3517evm.c | 2 +- > board/logicpd/omap3som/omap3logic.c | 13 +- > board/logicpd/zoom1/zoom1.c | 2 +- > board/logicpd/zoom2/zoom2.c | 2 +- > board/matrix_vision/mvblx/mvblx.c | 4 +- > board/nvidia/common/Makefile | 1 + > board/nvidia/common/board.c | 42 +- > board/nvidia/common/emc.c | 53 ++ > board/nvidia/common/emc.h | 29 + > board/nvidia/dts/tegra2-seaboard.dts | 64 ++ > board/overo/overo.c | 2 +- > board/pandora/pandora.c | 59 +- > board/pandora/pandora.h | 6 + > board/raidsonic/ib62x0/Makefile | 43 + > board/raidsonic/ib62x0/ib62x0.c | 79 ++ > board/raidsonic/ib62x0/ib62x0.h | 40 + > board/raidsonic/ib62x0/kwbimage.cfg | 169 ++++ > board/samsung/smdk5250/tzpc_init.c | 4 +- > board/samsung/trats/trats.c | 173 +++- > board/samsung/universal_c210/universal.c | 25 +- > board/technexion/twister/twister.c | 2 +- > board/teejet/mt_ventoux/mt_ventoux.c | 9 +- > board/ti/am3517crane/am3517crane.c | 2 +- > board/ti/beagle/beagle.c | 2 +- > board/ti/evm/evm.c | 2 +- > board/ti/omap5912osk/omap5912osk.c | 7 - > board/ti/omap5_evm/evm.c | 10 +- > board/ti/omap5_evm/mux_data.h | 489 +++++----- > board/ti/omap730p2/omap730p2.c | 6 - > board/ti/panda/panda.c | 2 +- > board/ti/panda/panda_mux_data.h | 10 +- > board/ti/sdp3430/sdp.c | 2 +- > board/ti/sdp4430/sdp.c | 4 +- > board/ti/sdp4430/sdp4430_mux_data.h | 2 +- > board/timll/devkit3250/Makefile | 44 + > board/timll/devkit3250/devkit3250.c | 65 ++ > board/timll/devkit8000/devkit8000.c | 2 +- > boards.cfg | 8 +- > common/cmd_sata.c | 9 +- > config.mk | 6 +- > doc/SPL/README.omap3 | 4 +- > drivers/bios_emulator/x86emu/prim_ops.c | 5 - > drivers/block/Makefile | 1 + > drivers/block/dwc_ahsata.c | 969 > ++++++++++++++++++++ > drivers/block/dwc_ahsata.h | 335 +++++++ > drivers/gpio/mxc_gpio.c | 3 +- > drivers/i2c/tegra_i2c.c | 14 + > drivers/input/Makefile | 3 + > drivers/input/input.c | 430 +++++++++ > drivers/input/key_matrix.c | 208 +++++ > drivers/input/tegra-kbc.c | 375 ++++++++ > drivers/misc/Makefile | 2 + > drivers/misc/pmic_dialog.c | 37 + > drivers/misc/pmic_max8997.c | 43 + > drivers/mmc/mxsmmc.c | 3 +- > drivers/mmc/omap_hsmmc.c | 61 +- > drivers/mtd/nand/mxc_nand.c | 33 + > drivers/net/fec_mxc.c | 88 +- > drivers/power/Makefile | 2 + > drivers/power/tps6586x.c | 280 ++++++ > drivers/power/twl6035.c | 65 ++ > drivers/serial/Makefile | 1 + > drivers/serial/lpc32xx_hsuart.c | 112 +++ > drivers/spi/mxs_spi.c | 23 +- > drivers/usb/host/ehci-mx6.c | 5 +- > drivers/usb/host/ehci-mxc.c | 4 - > drivers/video/Makefile | 4 + > drivers/video/exynos_fb.c | 128 +++ > drivers/video/exynos_fb.h | 61 ++ > drivers/video/exynos_fimd.c | 354 +++++++ > drivers/video/exynos_mipi_dsi.c | 253 +++++ > drivers/video/exynos_mipi_dsi_common.c | 637 +++++++++++++ > drivers/video/exynos_mipi_dsi_common.h | 48 + > drivers/video/exynos_mipi_dsi_lowlevel.c | 652 +++++++++++++ > drivers/video/exynos_mipi_dsi_lowlevel.h | 111 +++ > drivers/video/s6e8ax0.c | 256 ++++++ > include/aes.h | 70 ++ > include/ahci.h | 5 +- > include/common.h | 25 + > include/configs/P1023RDS.h | 3 - > include/configs/P2020COME.h | 2 - > include/configs/am3517_crane.h | 3 +- > include/configs/am3517_evm.h | 4 +- > include/configs/at91sam9263ek.h | 2 - > include/configs/cam_enc_4xx.h | 2 +- > include/configs/cm_t35.h | 1 + > include/configs/da830evm.h | 1 - > include/configs/devkit3250.h | 117 +++ > include/configs/devkit8000.h | 2 +- > include/configs/dreamplug.h | 2 + > include/configs/ea20.h | 3 +- > include/configs/eb_cpux9k2.h | 2 - > include/configs/flea3.h | 2 - > include/configs/hawkboard.h | 1 - > include/configs/ib62x0.h | 152 +++ > include/configs/igep0030.h | 261 ------ > include/configs/{igep0020.h => igep00x0.h} | 45 +- > include/configs/ima3-mx53.h | 269 ++++++ > include/configs/imx27lite-common.h | 1 - > include/configs/m28evk.h | 15 +- > include/configs/mcx.h | 4 +- > include/configs/meesc.h | 1 - > include/configs/mv-common.h | 1 - > include/configs/mx25pdk.h | 1 - > include/configs/mx28evk.h | 13 + > include/configs/mx31pdk.h | 1 + > include/configs/mx35pdk.h | 2 - > include/configs/mx53loco.h | 29 +- > include/configs/mx6qarm2.h | 1 + > include/configs/mx6qsabrelite.h | 17 + > include/configs/omap3_beagle.h | 3 +- > include/configs/omap3_evm_common.h | 3 +- > include/configs/omap3_overo.h | 3 +- > include/configs/omap3_pandora.h | 3 +- > include/configs/omap4_common.h | 5 +- > include/configs/omap5912osk.h | 2 - > include/configs/omap5_evm.h | 26 +- > include/configs/omap730p2.h | 2 - > include/configs/otc570.h | 1 - > include/configs/p1_p2_rdb_pc.h | 3 - > include/configs/pogo_e02.h | 119 +++ > include/configs/seaboard.h | 16 + > include/configs/spear-common.h | 1 - > include/configs/tam3517-common.h | 3 +- > include/configs/tegra2-common.h | 26 +- > include/configs/trats.h | 15 +- > include/configs/tricorder.h | 3 +- > include/configs/tx25.h | 2 - > include/configs/zmx25.h | 2 - > include/dialog_pmic.h | 187 ++++ > include/fdtdec.h | 71 ++ > include/fsl_pmic.h | 11 + > include/input.h | 147 +++ > include/key_matrix.h | 99 ++ > include/lcd.h | 64 ++ > include/linux/input.h | 155 ++++ > include/linux/linkage.h | 7 +- > include/max8997_pmic.h | 190 ++++ > include/max8998_pmic.h | 1 + > include/pmic.h | 1 + > include/tegra-kbc.h | 33 + > include/tps6586x.h | 68 ++ > include/twl6035.h | 42 + > lib/Makefile | 1 + > lib/aes.c | 598 ++++++++++++ > lib/fdtdec.c | 53 ++ > tools/gcc-version.sh | 32 + > 297 files changed, 18126 insertions(+), 1594 deletions(-) > create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/Makefile > create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/clk.c > create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/cpu.c > create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/devices.c > create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/timer.c > create mode 100644 arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c > create mode 100644 arch/arm/cpu/armv7/exynos/power.c > create mode 100644 arch/arm/cpu/armv7/exynos/system.c > rename arch/arm/cpu/armv7/omap-common/{reset.S => reset.c} (70%) > create mode 100644 arch/arm/cpu/armv7/omap-common/vc.c > rename arch/arm/cpu/armv7/omap5/{sdram_elpida.c => sdram.c} (64%) > create mode 100644 arch/arm/cpu/armv7/tegra2/crypto.c > create mode 100644 arch/arm/cpu/armv7/tegra2/crypto.h > create mode 100644 arch/arm/cpu/armv7/tegra2/emc.c > create mode 100644 arch/arm/cpu/armv7/tegra2/pmu.c > create mode 100644 arch/arm/cpu/armv7/tegra2/warmboot.c > create mode 100644 arch/arm/cpu/armv7/tegra2/warmboot_avp.c > create mode 100644 arch/arm/cpu/armv7/tegra2/warmboot_avp.h > create mode 100644 arch/arm/include/asm/arch-exynos/dsim.h > create mode 100644 arch/arm/include/asm/arch-exynos/fb.h > create mode 100644 arch/arm/include/asm/arch-exynos/mipi_dsim.h > create mode 100644 arch/arm/include/asm/arch-exynos/system.h > create mode 100644 arch/arm/include/asm/arch-lpc32xx/clk.h > create mode 100644 arch/arm/include/asm/arch-lpc32xx/config.h > create mode 100644 arch/arm/include/asm/arch-lpc32xx/cpu.h > create mode 100644 arch/arm/include/asm/arch-lpc32xx/emc.h > create mode 100644 arch/arm/include/asm/arch-lpc32xx/sys_proto.h > create mode 100644 arch/arm/include/asm/arch-lpc32xx/timer.h > create mode 100644 arch/arm/include/asm/arch-lpc32xx/uart.h > create mode 100644 arch/arm/include/asm/arch-lpc32xx/wdt.h > create mode 100644 arch/arm/include/asm/arch-mx28/regs-lcdif.h > create mode 100644 arch/arm/include/asm/arch-mx28/regs-lradc.h > rename arch/arm/include/asm/arch-mx6/{ccm_regs.h => crm_regs.h} (99%) > rename arch/arm/{cpu/armv7/tegra2 => include/asm/arch-tegra2}/ap20.h (96%) > create mode 100644 arch/arm/include/asm/arch-tegra2/apb_misc.h > create mode 100644 arch/arm/include/asm/arch-tegra2/emc.h > create mode 100644 arch/arm/include/asm/arch-tegra2/flow.h > create mode 100644 arch/arm/include/asm/arch-tegra2/fuse.h > create mode 100644 arch/arm/include/asm/arch-tegra2/gp_padctrl.h > create mode 100644 arch/arm/include/asm/arch-tegra2/pmu.h > create mode 100644 arch/arm/include/asm/arch-tegra2/sdram_param.h > create mode 100644 arch/arm/include/asm/arch-tegra2/warmboot.h > create mode 100644 arch/arm/include/asm/linkage.h > create mode 100644 board/cloudengines/pogo_e02/Makefile > create mode 100644 board/cloudengines/pogo_e02/kwbimage.cfg > create mode 100644 board/cloudengines/pogo_e02/pogo_e02.c > create mode 100644 board/cloudengines/pogo_e02/pogo_e02.h > create mode 100644 board/esg/ima3-mx53/Makefile > create mode 100644 board/esg/ima3-mx53/ima3-mx53.c > create mode 100644 board/esg/ima3-mx53/imximage.cfg > create mode 100644 board/nvidia/common/emc.c > create mode 100644 board/nvidia/common/emc.h > create mode 100644 board/raidsonic/ib62x0/Makefile > create mode 100644 board/raidsonic/ib62x0/ib62x0.c > create mode 100644 board/raidsonic/ib62x0/ib62x0.h > create mode 100644 board/raidsonic/ib62x0/kwbimage.cfg > create mode 100644 board/timll/devkit3250/Makefile > create mode 100644 board/timll/devkit3250/devkit3250.c > create mode 100644 drivers/block/dwc_ahsata.c > create mode 100644 drivers/block/dwc_ahsata.h > create mode 100644 drivers/input/input.c > create mode 100644 drivers/input/key_matrix.c > create mode 100644 drivers/input/tegra-kbc.c > create mode 100644 drivers/misc/pmic_dialog.c > create mode 100644 drivers/misc/pmic_max8997.c > create mode 100644 drivers/power/tps6586x.c > create mode 100644 drivers/power/twl6035.c > create mode 100644 drivers/serial/lpc32xx_hsuart.c > create mode 100644 drivers/video/exynos_fb.c > create mode 100644 drivers/video/exynos_fb.h > create mode 100644 drivers/video/exynos_fimd.c > create mode 100644 drivers/video/exynos_mipi_dsi.c > create mode 100644 drivers/video/exynos_mipi_dsi_common.c > create mode 100644 drivers/video/exynos_mipi_dsi_common.h > create mode 100644 drivers/video/exynos_mipi_dsi_lowlevel.c > create mode 100644 drivers/video/exynos_mipi_dsi_lowlevel.h > create mode 100644 drivers/video/s6e8ax0.c > create mode 100644 include/aes.h > create mode 100644 include/configs/devkit3250.h > create mode 100644 include/configs/ib62x0.h > delete mode 100644 include/configs/igep0030.h > rename include/configs/{igep0020.h => igep00x0.h} (91%) > create mode 100644 include/configs/ima3-mx53.h > create mode 100644 include/configs/pogo_e02.h > create mode 100644 include/dialog_pmic.h > create mode 100644 include/input.h > create mode 100644 include/key_matrix.h > create mode 100644 include/linux/input.h > create mode 100644 include/max8997_pmic.h > create mode 100644 include/tegra-kbc.h > create mode 100644 include/tps6586x.h > create mode 100644 include/twl6035.h > create mode 100644 lib/aes.c > create mode 100755 tools/gcc-version.sh Applied, thanks. Best regards, Wolfgang Denk